Very high values of CPU Vcore

Similar Questions

• Very high speed of CPU!

  Last two days, I have experienced a few problems. When my computer is turned on, the gets (98-100%) very high CPU speed and after a few minutes my computer hangs and then I have to turn off in strength. I'm not an expert on this issue, so I would appreciate your help.

  Here are the specifications of comp.:

  Windows Vista Edition Home Premium Copyright 2007 Service Pack 2

  Hewlett-Packard-Compaq Presario A900 Notebook PC

  Class 3.1

  Processor Intel (r) Pentium (r) Dual CPU T2370 1.73 GHz 1.73GHz

  2.00 GB RAM

  SystemType 32-bit

  .. and what are the process when I open the Task Manager:

  Sidebar.exe, Opera.exe, taskmgr.exe, dwm.exe explorer.exe, SndVol.exe, ehmsas.exe, ApMsgFwd.exe, NMBgMonitor.exe, ehtray.exe, HpqToaster.exe, iTunesHelper.exe, avgtray.exe, igfxsrvc.exe, SearchSettings.exe, jusched.exe, HPWAMain.exe, hpwuSchd2.exe, MSASCui.exe, QLBCTRL.exe, QPService.exe, IAAnotif.exe, Apoint.exe, igfxpers.exe, hkcmd.exe, igfxtray.exe, WiFiMsg.exe, Apoint.exe, unsecapp.exe, ApntEx.exe, winlogon.exe, NMIndexStoreSvr.exe, csrss.exe

  I tried to run scans with AVG, but my computer froze during the scan, so I couldn't finish it.

  Thanks for help.

  Hello

  Use this utility to see if you can work on the causes. Work in Mode safe when necessary.
  repeatedly press F8 that you start.

  ----------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems). You are using AVG which could have a role in the problem.

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• High values ready CPU

  I checked my VMs (in the top list of resources) and some of the virtual machines 'CPU' values ready medium arround 5000 milliseconds (statistics on the last day)

  I have a lot of 2 vCPU VMs. The each ESX in the Cluster CPU usage is close to 25%.

  Should I reduce the vCPUs count as fast I can do to get the best values of loan from CPU?

  Hello

  Don't download surprised when you see 'high' ready CPU values. On the performance tab, it is always more difficult to know how 'high' high is really.

  I wrote a blog on this topic: http://erikzandboer.wordpress.com/2009/01/30/performance-tab-numbers-demystified-by-erik-zandboer/

  In a Word, you should check how many samples is retained when you look at the chart 'last day '. If everything is left to the default value, you have one seems of (I think) 5 minutes.

  So, do the math, you get: 5 minutes seems is 5601000 = 300,000 milliseconds. So if you see 5000 millseconds CPU ready time, it's really only 5000 / 300,000 = 0.016 or 1.6%. Which is actually pretty good!

  Visit my blog at http://erikzandboer.wordpress.com/

• The CPU suddenly very high low host CPU

  Hi all

  I was struggling with a particular host for awhile and am unable to access the root of the cause. What we have so far:

  Physics:

  1 host, 2 quadcores with HT technology (total 8 cores, 16 logic due to HT), 24 GB of ram

  HP Proliant DL380 G6

  Virtual:

  1 x Windows 2008R2 DC/FS 2vcpu

  1 x Windows 2008R2 SQL 4vcpu

  1 x Windows 2008R2 Exchange 2010 1vcpu

  1 x Windows 2012R2 RDS currently 8vcpu

  Recently, the old 2008R2 RDS has been replaced by the new 2012R2 RDS. This went well, nothing special, no complaints, that rent because it was quite a bit of snappyier than the last.

  Then, (and I did not understand what happened yet, could have been power failure) after about a week the Esxi host froze and we had to restart. Servers began and everything was fine, until the problems started.

  The 2012R2 virtual machine currently maxing out at 100% cpu usage in Windows Task Manager, between all the virtual cores. This can be achieved by something as simple as the launch of chrome and Outlook at the same time. Performance on this virtual machine is terrible. All other virtual machines are affected also, extremely high CPU usage in Windows, maxing out even with simple tasks. If I open vSphere and check the CPU usage, it's nowhere near capacity. The RDS virtual machine did not exceed 3000 mhz maximum.

  What we have tried so far:

  -Reboot the host

  -Restart the virtual machine

  -The power management has changed compared to the High Performance HP OS Control setting, and the powersetting to high performance in vsphere. I can see through esxtop that all hearts are at c0 permanently. (Could not verify this before because of ILO2 failing to display this when HP high performance mode is activated)

  -J' tried all sorts of Vcpu assignments, until 1 vcpu/1core 8 sockets on the 2012RDS. There is no pool of resources, there is no reserves (I tried those who, unfortunately, no effect)

  -Close all VM except one (to check if there is some sort of contention cpu), always the same.

  I think something is gone belly up when the host rebooted, simply unable to understand why, and apart from the crazy CPU usage, the server running now stable.

  Any input is greatly appreciated.

  21:03:46 until 01:52, 344 worlds, 4 VMS, vCPUs 15; CPU load average: 0.19, 0.26, 0.22

  PCPU USED (%): 2.6 2.5 2.5 3.0 4.1 2.1 2.7 1.9 2.9 5.7 2.2 2.4 1.9 1.7 2.3 2.4 AVG: 2.7

  PCPU UTIL (%): 19 19 19 21 28 18 20 16 17 28 16 16 13 14 14 16 AVG: 19

  UTIL (%) BASE: 33 35 40 31 40 27 23 26 AVG: 32

  ID NAME NWLD % USED GID % PERFORMANCE SYS % WAITING % VMWAIT % % IDLE % OVRLP % % MLMTD % SWPWT CSTP RDY

  3785 3785 XXXXX 14 24.00 153,48 0.13 1243,64 11.57 2.75 633.36 0.81 0.00 0.00 0.00

  10167 10167 XXXX01 10 6.87 54,83 0.11 944,21 3.31 341.84 0.95 0.21 0.00 0.00 0.00

  3361 3361 XXXXX01 7 3.21 13.37 0.05 686,25 0.23 87.04 0.35 0.00 0.00 0.00 0.00

  3349 3349 XXXXe01 10 1.64 8,89 0.06 990,63 0.28 191.21 0.50 0.02 0.00 0.00 0.00

  This has been fixed!

  Have us shut completely the host, took off all power physically and reconnected. After that, CPU returned to normal. Upgrade to ESXi for good measure.

  Apparently restart with the ILO is not enough.

• I need help for the creation of rules - the very high values!

  Hello
  
  I have some troubleshooting by creating rules to HFM 11.1.1.3. I declarate a table where an account data are stored. There should be a stored digital data in another account of HFM (e.g. "EB_MITTEL"). The stored data are much higher than the value in the logfile ('write2File") showed. If I divide this value by 100000000000000 so good value.
  
  Example: The value in the log file: 16492,8691588785 (',' = the decimal delimiter)
  Value in the data grid: 164.928.691.588.785 ("'. ' separator = of thousands")
  
  Part of the rule file:
  
  Void
  
  Dim lMittelWert, lMaxWert, lMinWert
  
  lMittelWert = 0
  lMaxWert = 0
  lMinWert = 0
  a = 0
  For x = 1 to 13
  
  If arListe (x) <>0 then
  lMittelWert = lMittelWert + arListe (x)
  a = a + 1
  End if
  
  If lMaxWert < arListe (x) then
  lMaxWert = arListe (x)
  End If
  
  If x = 1 then
  lMinWert = arListe (x)
  End if
  
  Next
  
  lMinWert = lMaxWert
  
  For x = 1 to 13
  
  If lMinWert > arListe (x) and arListe (x) <>0 then
  lMinWert = arListe (x)
  End If
  write2file arListe (x)
  Next
  If <>0 then
  lMittelWert = lMittelWert / a
  End if
  KSM Exp ' a #EB_MITTEL.» ' C1 # "& C1Item &"="& lMittelWert
  KSM Exp ' a #EB_MIN. C1 # "& C1Item &"="& lMinWert
  KSM Exp ' a #EB_MAX. C1 # "& C1Item &"="& lMaxWert
  End Sub
  
  
  
  I hope someone can help me, thanks in advance. (and I'm so sorry for my bad English)
  
  Jürgen

  VB script using string to convert numbers in some languages require special attention during the handling of numbers. (French, German and other who use commas as the decimal separator).

  Internally, HFM VB Scripts use periods (.) as the decimal separator. One solution is to force the use of decimals and force the script engine to use decimal numbers by declaring the local to be English in the United States with:

  b = setLocale("en-us")

• CPU becomes very high - OS restart automatically - viruses?

  for 3 months, I have a problem with my cpu...
  the use of the cpu suddenly become very high and that's when I have access to the internet...
  the computer is just after this release out of control and the operating system automatically restarts from scratch, why is this?

  Hi Ryad,

  This behavior soiunds looks a lot like the Sasser worm that causes very heavy use of the CPU and causes also the PC restart regularly.

  You need start your computer in safe mode, and then run your antivirus software (I would also like to run your Malware software as well) to try to remove the virus. However, Sasser is not so easy to remove so please also consult the following URL: -.
  http://securityresponse.Symantec.com/avcenter/venc/data/W32.Sasser.removal.tool.html

  Kind regards

• Very high CPU usage in svchost during playback of an event in a major newspaper of the events using WMI

  Hello

  I have a very high utilization of the processor in the process 'svchost.exe LocalServiceNetworkRestricted' during playback of an event in an event log in Windows 2008 64 SP02 using local or remote WMI.  The same happens using Wbemtest or C++ WMI code.  The use of WbemTest, "Open forum" (identical to one the GetObject of WMI API) read just one of recent events in the event log:

  Win32_NTLogEvent.logfile = "application", recordNumber = 2615657 (in this case, it was the id since the last event in the very large to the Application event log)

  takes 3/4 seconds consuming thant plus 50% of the monitored computer CPU.  This only occurs when the event log is very large (in my case 1 million records), the event log contains about 10000 events just fine.

  The problem is that I read the complete paper in a remote program and this product CPU usage charge too much CPU to the monitored computer.  I do not read the newspaper of the events one by one, but I'm using WQL queries but I do some GetObjects and the peformance is really terrible.

  Any idea what to change or search?

  Best regards

  Jordi

  Hi jordil,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  TechNet Windows Server general Forum

• Computer running slow / CPU shows very high %

  Why my laptop run very slow and lagging behind, the CPU show % very high and unstable at all without opening anything. and he delay my departure until the time of the computer.

  the malware scan, that I did it, it detected something, after that I deleted. but the problem still remains the same, sometimes difficult to cause me online also. really terrible. (I'm poor COMPUTER knowledge) ^^. Finally, I have format my computer and using window 7. Want to just thank you to you all who come to suggest me, teach me method to solve this kind of problem.

  and Andre.Ziegler, I n know what you mean. Don understand not at all. Haha, post you can not see. -Sry _-

• 12.1.3 regeneration of forms taking very high CPU and time

  I've recently updated 12.1.2 to 12.1.3 (+ RPC4) and a month of back 10.2.0.5 to 11.2.0.4 (+ CPP) on Solaris 10 64-bit with 2 nodes Applin and separate DB Node with 16cpu and 64 GB of ram with sufficient swap and @12 Go of LMSS.  While patches to upgrade and then the CPU is very high continuous - idle 0 UC 99.2 on DB Server user and, even if the workers are taken as 16 instead of 32 - default.

  More than 18 hours are taken and still only 1,500 jobs are completed and 2000 + remaining. With the help of adadmin with options for all products.

  Appreciate your help to accelerate this process.

  There is little improvement with your solution, but below the solution was really helpful: Oracle Applications DBA: Compilation of form against a 11g, database crashes or takes a very long time [880660.1 ID]

  Thank you

• TimesTen 11 g - direct connection jdbc get very high CPU usage

  Hi guys,.
  
  When I run my application with a direct connection, I get very high CPU usage... Can help me where can I fix this.
  This is the configuration I have.
  
  PermSize = 102400
  TempSize = 2457
  
  More, should one I include the LogBufferSize? How much should I put in it?
  
  
  Thank you
  
  John

  Well, the point to keep in mind is that overall CPU utilization will not higher with direct mode with a local server. In fact, it will be a little weaker because of the much higher efficientcy of direct mode compared to client/server mode.

  The usual rules apply here; You must decide on the maximum use of your machine (normally one trying to limit it to)<=60% for="" the="" most="" optimal="">

  Then you need to see how your workload uses the CPU. with TimesTen there is no blocking operation within the database for a single application thread can, if it does not crash on all external events such as queue of messages, etc. I/O, usually consume a whole CPU core (a large volume of work in the process of transformation). If he asks you to this nature then you want to limit the number of concurrent threads to the smallest reasonable number. Assuming that the machine is running just the application and TimesTen and nothing else and that you wish to leave a carrot free for activity of DB o/s and the background (for example, journal of hot flashes and checkponting) then optimal throughput and response time will be reached with three concurrent threads hitting the database. You can run course with wires more than that but the flow will not be increased (in fact it will decrease somehwat due claim etc.) and response times will certainly increase. For this application profile you certainly wouldn't want to use more than 8 simultaneous maximum son.

  At the other extreme is an application that has multiple concurrent threads, but where each thread spends much of its time waiting for some work to do and runs only makes for a short period of work process then returns to the wait. You can use several more concurrent threads than the hearts of processors for this application profiel. The optimal number will be determined by the specific workload, load CPU it generates and your maximum target of use of the system.

  None of this is really specific TimesTen. The main differences that TimesTen brings all this are:

  1. the workload of database now works on the same machine as the application rather than on a server separate from the DB so that it consumes resources on the application computer.

  2. in general, database interactions will result not in any idle time from a point of view CPU usage (as a consequence of (1) above).

  Ideally, your request will be designed and implemented so that the number of concurrent threads can be controlled as a parameter tunbable to allow you to adjust the workload generated by the application to the specific environment in which it runs.

  Chris

• SG200 - 26 [FW - 1.1.2.0]-very high response time: &gt; 1000 ms!

  Hello

  Problem: New SG - 200 26 Smart Switch with the latest Firmware - very high response time 500-800 ms

  We have a router of EdgeMarc 4500 with 10 VPN tunnels at 10 locations of brach. SG-200 26 Smart Switch is connected to 7 servers (Terminal 2, SQL and others), all locations have 50 MB download and download 20 MB of Verizon FiOS Internet service speed.

  Depending on the tool Kulvik, the response time of this switch is around 500ms. At the same time, the response time of the EdgeMarc 4500 router is around 40ms and less.

  We have 60 remote desktop computers connected to our SQL Server database and 40 users of RDP via Remote Desktop. The configuration is the same for 3 years. But we change the switch HP 1800 - 24G of Cisco because of some failures of connection. For connection failures, we first think the old switch from HP, but it looks like problem with router EdgeMarc.

  This response time is normal? I have attached two screenshots of Switch Cisco and response time for the past 24 hours EdgeMarc router according to the tool Kulvik. Any other advice would be greatly appreciated. Thank you.

  Hello Srinath,

  Thank you for your participation in the community of support to small businesses. My name is Nico Muselle of Cisco Sofia HWC.

  The response time of the switch can be considered quite normal. Reason for this is that the switch gives CPU priority to its actual tasks that would be sure to pass, lists of access, VLANs, QoS, multicast, and DHCP snooping etc etc. As a result, the switch itself ping response time does not show in any way the good operation of the switch.

  I invite to try the rattling customers connected to the switch, you should be able to notice that the response time to customers are much lower than the response time of the switch itself.

  I hope that answers your question!

  Best regards

  Nico glacier

  Senior Network Engineer - CCNA - CCNA security

• See the top 10 high-value cost rank only.

  Hello
  Need some advice how to get top 10 high value cost line only in marchandises9.
  
  1st row 2000USD
  Line 2 1900USD
  3rd place 1800USD
  4th row 1700USD
  Line 5 1600USD
  Line 6 1500USD
  Line 7 1400USD
  Line 8 1300USD
  Line 9 1200USD
  Line 10 1100USD
  Line 11 3000USD
  Line 12 400USD
  
  The report should show the line 1 to line 8 and line 11, line 12, because it is the higher cost of the value.
  Thank you very much in advance.

  If creating interactive reports look at results computed column with the rank function section.

  You will need to move columns results in a Table off the results, and then filter on rank there. You should then rebuild your relationship off the coast of the new section of the Table or use the optimizer to re-associate report on board.

  A unique approach I've seen is in your query Section sort in descending order on the fact, and then change the properties of the query to bring back only 10 lines - for top 10 records.

• Switching frequency of newspaper is very high

  Oracle 10g
  Sun Solaris
  
  I came across a situation where the newspaper switching frequency becomes very high for a couple of daily hours and then returns to normal.
  
  The increase in frequency occurs for about 6 to 8 hours daily. Then he is back to normal.
  
  
  It's a situation where we have to change the size of the recovery log?

  newlg1 wrote:
  Define 'normal '. Set 'top '.

  Just in the last hour, the log file switch happened on average 5 minutes.

  Not bad. For me the 'high' is a minute or less. For me 'normal' is 15-30 minutes.

  I tend to change the size of the usual load will cause a switch just about 15 minutes. Then, I'll use ARCHIVE_LAG_TARGET to keep roughly 30 minutes for no charge. You might have other values.

  There is also a checkpoint not complete messages in the alert log, but it was on
  On 18 April. I don't see that today.

  If the checkpoint is not complete is a regular show, try adding several groups of newspapers.

  However, both the size of the log and journal County should not be affected if you do not actually experience a problem. Still, what you describe is a symptom, not a problem in itself.

  >

  It is a RAC database. This log switch occurs in only one instance. But not the other.

  This is because the only case to charge more than others.

  If the load must be balanced, check your listeners and your TNS customer configurations. It is not uncommon set lots of hit one and a single node, which can be tuned. Yet once, controlled by network settings.

  Note that sizes of newspapers do not need to match each instance. Sizes are set according to the load expected on each node.

• Satellite A660-167 - audio latency very high indeed

  Hello guys.

  I have a Toshiba A660-167 and I'm having a problem with the audio latency, it is actually very high.
  I am using Windows 7 Home premium 64-bit and I already tried using windows 7 32-bit and windows Xp but the problem remains.

  Toshiba already tried to "fix" my problem, but as they said that my laptop works perfectly.
  If someone knows something about the latency problem that his help will be very appreciated...

  Thanks in advance

  Hi dj_betty,

  And how did you notice this problem of DPC latency?
  You have a problem with noise or speakers as low volume or what?

  I must say that my Satellite A660 runs great. I often listen to music with headphones or speakers in-house and have no problem at all. Music and video will be read correctly.

• Qosmio F30-140: Vista stopped and I heard a very high noise

  Hello everyone

  Really, I have a big problem
  My operating system is Windows XP media center 2005 and it is written above (Designed for windows xp, Windows Vista capable)

  2 last week I had installed windows Vista ultimate 32 bit and pilots of the Qosmio, but after 2 days when I worked in Microsoft office Word, the system stopped and I heard a very high noise of it (maybe the processor or fans) but he was really scared and immediately, I turned it of the power button.

  This problem occurred 4 times through this time. I had installed windows xp again from the recovery disk and there is no problem and I installed Windows Vista again hard night but today in the morning the same problem again.

  I don't really know how to fix this and I look forward to receiving help from you.

  Hello

  It s certainly nothing wrong with the firmware Toshiba VAP this nothing to do with your question, you issue sounds more like an overheating problem the OS freezes at a temperature inside the laptop.

  Probably don t cooling modules run a full implementation because of the dust and debris inside the laptop.

  The second reason why a laptop could overheat is the graphics driver installed _non-Toshiba_!