Very slow logoin using RDP Client, quick view

Similar Questions

• white screen when connecting using the client to view

  Hello

  I have a situation on my hands if I try to connect to my office using the client to view I can connect but when I click to start all I get is a black sceren.  If I can access the external url of my security server, I can connect and my desktop appears.  If anyone has experienced this? any ideas would be greatly appreciated.

  You can connect from a WAN using PCoIP if you use a VPN. If you are

  using the server security, for now, you will need to use RDP.

  Ian

• Very slow server file transfer client

  Hello

  I am currently using application 6i and even I am converted forms 11g. However, I found that the transfer of files from Client to server weblogic is very slow. My 6i application takes 20 seconds for all 5 mb upload while 11g takes 40sec to copy a file to server weblogic only FTP get and finally download beginning so full download completed around more than 1 minute.

  Download same front end are little slow

  Can anyone guide on this

  Thanks in advance

  Vishal

  
  

  How you export your file on the application server? with webutil? also that

  My 6i application takes 20 seconds for all 5 mb upload while 11g takes 40sec to copy a file to server weblogic only FTP get and finally download beginning so full download completed around more than 1 minute.

  What has the FTP to do with it?

  see you soon

• Equium A100-338 has started to go very slow after using the recovery CD

  I used the recovery CD after my Equium A100-338 has started to go very slow, it still seems slower than it used to be.
  I haven't added anything to the computer from the CD recovery and verified the Manager tasks to see if I could spot anything suspicious.

  Statistics say, use 18-22% CPU, but the physical memory is about 68% is this normal or should it be less?

  Is there a list of standard processes I can check against mine to see if its doing something, it shouldn't be?

  Thank you

  Hello

  I think you feel that unity is a bit slow due to the high amount of different processes that run in the context of the BONE.

  The fact is that your laptop supports various features such as buttons FN, Toshiba control buttons, etc.
  All this has needs drivers.

  In addition, as I m not wrong the Norton Internet Security has been installed on your system.
  It s part of the image of Toshiba and this tool could affect the performance of the system.

  I have used in the past, but now changed to another application that doesn t need a lot of material resources.

  So if you want you can disable or delete some of the tools and utilities that are not important to you and could clean the system using a 3rd third party tool called CCleaner

  Welcome them

• Firefox is very slow, been using IE for a month. Nothing works except start PC in safe mode. 2 times, also uninstalled profile. Reinstall, resets, etc.

  also, disabled addons. See above. On win7. IE and google earth normal run. Abandoned, using IE for a month. On another PC so site reads the wrong plugins.

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test to see if that helps.

• Problem / connection with the client to view

  Our assessment notice.

  View Manager: 4.0.1 build-233023

  Discover the composer: 2.0.0.210930

  Reviews: 4.0.1 build 2029

  So far so good. We have created a dynamic office and were able to deploy desktop computers. We use an ad group to allow users to this pool.

  To access desktop computers in this pool via the web portal is no problem, but when the same user attempts to use the Client to view we get a message that authentication has failed. In the View Manager events, I got these messages:

  1 (SESSION: E2C6C98C7A5AB8A624450E4B70DB9A78; 8 D) XXXX\YYYYYYYY: 18B0AC59A9A16F3F0158209FC1CC26) the user USER; USERSID:S - 1-5-21-nnnnnnnnnnnnn; USERDN:CN=S-1-5-21-484522859-389107532-2199480311-219035,CN=ForeignSecurityPrincipals,DC=VDI,DC=VMware,DC=int; has disconnected from VDM

  2. (SESSION: E2C6C98C7A5AB8A624450E4B70DB9A78; 8 D) BROKER_LOGOFF: USER: 18B0AC59A9A16F3F0158209FC1CC26 XXXX\YYYYYYYYY); USERSID:S - 1-5-21-nnnnnnnnnnn; USERDN:CN=S-1-5-21-484522859-389107532-2199480311-219035,CN=ForeignSecurityPrincipals,DC=VDI,DC=VMware,DC=int;

  The strange thing is, I left all this next door for a few minutes and tried to connect via Client discovered again later. This time, it worked, but at the opening of the session of office (office of screen already appeard) closes the windows desktop without any message. After you start the Client view again, the authentication will fail again.

  Time is synchronized in all entities.

  Any ideas, tips, solutions?

  
  AWo
  
  VCP 3 & 4
  
  \[:o]===\[o:]
  
  = You want to have this ad as a ringtone on your mobile phone? =
  

  = Send 'Assignment' to 911 for only $999999,99! =

  What ESX version are you running?  They had the 4.0 update number 2 with PCOIP, http://kb.vmware.com/kb/1022830.

  The opening of autologon, I guess that we refer to log in as current user box?    I have seen issues where if I leave my PC to the top and running for long periods of time it fails, but a simple reboot fixes this problem.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Very slow view using OS x client for Windows 8 RDP

  I'm having a problem of strange performance to help the customer to view for OSX and connecting to a remote desktop in Windows 8. I'm the last side connections to the same remote workstations using a windows on the excellent work of the RDP client and client and server versions. No performance problems. I'm a bit at a loss as to what could be the issue.

  Context menus in Office remote work quickly but running programs, opening and closing of windows, etc. is very slow. No conflicts or hogging on the remote system, nor the client resources. All connections PCOIP or RDP sessions to other workstations (which are all Windows 7) work perfectly without any problems. Any help in troubleshooting is appreciated.

  Hello

  When connecting to the remote with the Protocol RDP of Mac View Client Desktop, it will use the image of high quality as a default value for the connection of the DRC. MS RDC app is a very old application, there is no new version for so long and there are no updates to improve the performance of this specific to the new Windows operating system (Win8/8.1/2012). Perhaps the reason for the performance on Windows 8 with the DRC issue.

  If you are using the RDP protocol client Mac view, please change display settings for the Remote Desktop Connection (RDC) first app. And then reconnect directly remote desktop via IP (without customer view) to check if the performance is somewhat improved.

  Menu at the top of the app DRC: DRC-> preferences-> display

  Try to change some parameters like the attached screenshot shown.

  

  If it works, you can replace the template file RDP for the Mac View Client app with steps below:

  1. download the attached template file ' vmware - view.rdp.

  2. copy and replace the file in the Applications/VMware view Horizon Client/Contents/Resources/vmware-view.rdp

  3. exit view Mac Client app

  4 restart Mac View Client and connect to Windows 8 desktop via RDP Protocol

  Thank you.

• Firefox is very slow when you use RDP

  Firefox is fast when you use Windows directly. But when you use RDP it is very slow. For example, empty new tab takes about 6 seconds to open. The RDP connection is fast and another response programs immediately (for example the same page navigation in IE is fast).
  What is the problem with Firefox?

  Could it be the graphics hardware acceleration?

  You will need to probably restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.). On the remote system:

  Orange Firefox button or classic menu Tools > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  Then restart Firefox. Does make a difference?

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• DeskJet 2544: hp deskjet 2544 suddenly prints very slow but quickly copies

  I have had this printer for about 6 months.  Things were very good.  Recently, it started very slow printing.  I read it could be weak cartridges so even if they had both ink, I replaced the.  I have nothing but HP used since the beginning. I noticed that she copy quickly, but print very, very slowly.  Any suggestions? It has been connected wireless but I stopped that and we hung usb thinking that was the issue.  But no. I should add it is connected to a Dell AIO

  Hello @sues2015!

  Thanks for posting on the HP Forums!

  I should be able to provide suggestions!  I can see that over time your printer running slowly when printing from the computer wireless or USB connected.  If the printer is capable of performing a photo copy at normal speeds and then indicating that the equipment is working correctly and you are probably looking to a software problem in the computer.  Also if the printer is having the same problem USB or wireless connected pointing more fingers to the software.

  The first thing I recommend is to uninstall the HP software. Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.
  
  To uninstall the HP software, click here: uninstall the HP software
  
  To perform a disk cleanup, click here: perform a disk cleanup
  
  To download the HP software, click here: HP Deskjet 2540 all-in-One Printer series full feature software and drivers

  If please, after back and let me know how everything goes.

• Terminal Server RDP is very slow!

  Hello!

  I have a small network with a domain controller Active Directory (Windows 2003) - including the Exchange, I had a Windows 2003 Terminal Server initially, but have replaced the Windows 2003 Terminal Server with a Terminal Windows 2008 Enterprise Server (not R2). Windows 2008 is a completely new system, not an upgrade.

  The problem is that the new Terminal Server ('08) is running very very slow one time the old 2003 Terminal Server is not present on the network. Although I use is no longer the old server, he seems to have an impact on the performance of the network.

  For example, if I should shut down the old server, the new server becomes very slow. It takes about 5 + minutes to services/applications load after you try to connect to the server using RDP. You get a white screen for a long time before the icons are loaded and everything works really slow, including Outlook. On the contrary, once the old server is started in Windows, the new server works very well.

  All servers are physical boxes and I'm not going to finally get rid of the old Terminal Windows 2003 server.

  When you configure the 2008 Terminal Server, I did transfer the IP address of the Terminal Server, the Terminal Server 2008 Server, 2003 server and give the old server a new IP address. I don't know if it has something to do with the behavior, but the old server is not used. It is initialized only to try to keep the stable network.

  Jale01

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• My computer is very slow. I used it for a year.

  original title: slow computer

  my computer is very slow and I have only had for a year I do not download anything that is mainly for testing or research, but I would like to catch up on shows I missed, but they take forever to watch because it's so slow, how can I solve this problem?

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

  Group residential slow and other problems with it

  Hello!

  I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?

  And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.

  If I forgot something to write, or you need more information, do not hesitate to ask.

  I'd appreciate any help really.

  Hello

  Manually check manufacturers sites WiFi because pilots offered through
  Updates Windows will most often not be later (MS is far behind certifying)
  drivers and many manufacturers do not quickly submit newer versions or not at all). See
  Manual driver update of the methods below.

  The question could be WiFi in fact however try to device (hardware)
  update the driver first.

  What antivirus/security is used? Some of those who will cause problems with the
  Homegroup. Since it happens more often on a single computer that on there
  a check.

  From this link:

  Homegroup: frequently asked questions (also shows how delete and remove homegroup)
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  ==================

  How to upgrade manually the drivers:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Client performance is very slow

  On the part of the Oracle database and E-Business applications track, I installed the PA for the Oracle database and the extension of the PA of E - Biz.

  The location of the servers the PA Middleware and collector is in WE (Boston) , while the PA Client is installed on the local machines in India (New Delhi).

  The PA Client performance is very slow while we move from one screen to another.

  I know that it is clearly the bottleneck of bandwidth bandwidth/latency network, always looking for suggestions to mitigate.

  I think that the network latency is your problem here. The two recommendations that I have are:

  (1) use the web interface in the UI Foglight. This should perform better especially if you use a local FglAM to the collector and middleware.

  (2) use a terminal server server or virtual office in Boston to install thick client PA. This will give you the best user interface response times.

  Thank you

  Jeff Currier

• Very slow access to data on HP MIcroserver Gen8 warehouses. Can not change the system of booking resources with vSphere client.

  I did a clean install of ESXi 6 with HP supplied image (ESXi-6.0.0-2494585-HP-600.9.1.39-Mar2015).
  Access to and from the warehouses of data over network via vSphere Client (6.0.0 - 2502222) is very slow - ~ 10 Mbps (there are several hundred under ESXi 5.5)
  I suspect that ESXi 6 limited CPU resources used by the host to 230 MHz system.
  I can't change the settings 'System Resource Reservation"(unlike ESXi 5.5, where I can change and switch to Simple or advanced mode).

  Hey ArnisR,

  I finally found the problem. In the last 5.5 ESXi and version 6.0, they replaced the driver hpvsa (HP ISO vSphere!). With these drivers, I have known major problems with banks of data and, therefore, the controller B120i (RAID) of the Gen8 MicroServer HP.

  The problem is caused by the last (HP) ISO (from March);

  -Mar2015.iso 5.5.0 - Update2-2403361-HP - 550.9.2.27 VMware ESXi

  -Mar2015.iso 6.0.0 - 2494585-HP - 600.9.1.39 VMware ESXi

  I found out (because I had an older ISO), the ISO VMware ESXi 5.5.0-Update2-2068190-HP-5.77.3-Nov2014.iso works well! With this ISO standard, all performance issues disappeared.

  The difference between the ISO is as follows. The former ISO contains the driver of storage scsi-hpvsa 5.5.0 - 88OEM. ISO (s) of March come with new storage driver scsi-hpvsa 5.5.0 - 92OEM or scsi hpvsa - 5.5.0 - 90. These drivers are the cause of the problems in the controller of B120i!

  Installing ESXi 5.5 or 6 since last ISOs, you must manually install the old driver of storage (SCSI hpvsa - 5.5.0 - 88). I tested with the HPSA file scsi vib - 5.5.0 - 88OEM.550.0.0.1331820.x86_64.vib. Then I adjusted the ISO HP and equipped with the old driver. Now I can install ESXi 5.5 or 6 ISO (custom) of HP, which includes the former driver.

  I hope this helps!