VGA not supported

Similar Questions

• X223W - VGA does not? (input not supported)

  Or maybe that I don't do something good?  I'm just trying to plug my 360 via VGA.  I have my PC connected via DVI.  When the two are connected, I use the OSD to access the plug insertion icon.  I have 3 options here.  Analog, digital and DDC/CI.  Digital is highlighted that I assume average DVI is connected.  If I turn it on to analog the screen goes black and says "input not supported".  If I unplug my DVI cable and then just plug the VGA cable I always get "input not supported".

  Any help would be appreciated it drives me crazy.

  For reference, I used this same 360 and VGA cable on another monitor and it works fine.

  It seems that sent by the 360 resolution or refresh rate is not supported by the monitor.

  See this table of hours of support for this model:

  

• When vga cable connection to tv message comes up not support on the TV screen

  When connection cable vga to tv to the computer message comes up not support on the TV screen

  There is a compatibility issue, which is that the TV is showing the signal it receives cannot be treated by the latter.

  If my suggestion is to look at the manual of the television or the manual online for television at his homesite to get 'accurate' requirements to connect your computer to the television, including DPI

  then see how you can get your computer to meet.

  you might need a buy a specialty graphics card (this is xp compatiable) who has the ability to convert computer and output to the TV signal.   in others, the graphics card can meet who needs the TV.

• Satellite A300 - 1 5 ACPI is not supported under Linux

  I have laptop Toshiba A300 - 1 5. When I run Windows absolutely everything works fine.
  But when I boot Linux (I tested the two 8.10 of Ubuntu and Fedora 10), Fn keys does not work.
  Neither is bluetooth, which is a USB hidden and disabled by default.

  I noticed that pilots * toshiba.ko* and * toshiba_acpi.ko* cannot be loaded.
  I tried to load them, but both * dmesg * and said */var/log.messages*: * {color: #000080} not a cell phone supported. {color} *.
  I also tried to use * toshset, toshutil, fnfx *, but they all need * / dev/toshiba * and * / proc/acpi/toshiba * or * / proc/toshiba * exist.
  And it is impossible to load them, because the cell phone is not supported.

  I have two questions:

  1 Toshiba plans to cooperate with suppliers of Linux in order to fix this bug.
  I have visited many Linux forums and many people's complaint they have keys functional unfunctioning under Linux.
  So, I think that if the product is thrown on the market, it must be supported, is it not?

  2. How can I temporarily fix this bug to get the missing functionality before the next version of Ubuntu or Fedora? Can someone advice any solution.
  (Well, please don't say: leave Linux and use Windows.) I want to use Linux, not Windows. "And I want a job in the same way).

  If you want additional information about a bug, I will provide.
  Thank you very much.

  Hello!

  I have a Toshiba Satellite A300 - 1 M 1 PSAGCE under Ubuntu Intrepid (kernel 2.6.27.11).

  _I realized that only Ricoh SD/xD Card does not work (it worked on VIsta). _

  Anything else is OK.

  I think that our laptops are related, take a look at my ACPI and journal modules.

  Bq. + $ lsmod | grep acpi +------+ 16400 1 acpi_cpufreq +------+ freq_table 13568 3 acpi_cpufreq, cpufreq_stats, cpufreq_ondemand +------+ 4 47800 acpi_cpufreq processor, thermal +.

  Bq. + $ ls/proc/acpi / +------+ battery dsdt event fadt fan info power_resource processor embedded_controller ac_adapter sleep thermal_zone wakeup video +.

  Bq. + $ dmesg | grep-i acpi +.
  Bq + BIOS-e820: 00000000bfe86000 - 00000000bfebf000 (ACPI NVS) +------+ BIOS-e820: 00000000bfeee000 - 00000000bfeff000 (ACPI data) +------+ ACPI: USE 000FE020, 0024 (TOSINV r2) +------+ ACPI: XSDT BFEFE120, 0064 (r1 TOSINV TOSINV00 1 1000013) +------+ ACPI: FACP BFEFD000, 00F4 (TOSINV TOSINV00 1 MSFT 1000013 r4) +------+ ACPI: DSDT BFEF1000, 7745 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: FACS BFE93000, 0040 +------+ ACPI: HPET BFEFC000, 0038 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI : APIC BFEFB000, C 006 (TOSINV TOSINV00 1 MSFT 1000013 r2) +------+ ACPI: MCFG BFEFA000, 003 c (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: ASF! BFEF9000, 00A 5 (r32 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: SLIC BFEF0000, 0176 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: BOOT BFEEF000, 0028 (TOSINV TOSINV00 1 MSFT 1000013 r1) +------+ ACPI: SSDT BFEEE000, 0655 (r1 PmRef CpuPm 3000 20051117 INTL) +------+ ACPI: DMI detected: Toshiba +------+ ACPI: PM - timer IO Port: 0 x 408 +------+ ACPI: address Local APIC 0xfee00000 +------+ ACPI: LAPIC (acpi_id [0 x 01] lapic_id [0x00] activated) +------+ ACPI : LAPIC (acpi_id [0x02] lapic_id [0x01] activated) +------+ ACPI: LAPIC (acpi_id [0x03] lapic_id [0x00] disabled) +------+ ACPI: LAPIC (acpi_id [0x04] lapic_id [0x00] disabled) +------+ ACPI: IOAPIC (id [0x04] address [0xfec00000] gsi_base [0]) +------+ ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) +------+ ACPI : INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 level) +------+ ACPI: IRQ0 used by substitution. +------+ ACPI: IRQ2 used by substitution. +------+ ACPI: IRQ9 is used by substitution. +------+ ACPI: HPET id: 0x8086a201 base: 0xfed00000 +------+ Using ACPI (EMAC) for SMP configuration information +------+ ACPI: Core review 20080609 +------+ ACPI: looking for initramfs Custom DSDT +------+ ACPI: bus type pci registered +------+ ACPI: EC: pick up at CBS in the DSDT +------+ ACPI: _OSI (Linux) ignored by DMI BIOS query +------+ ACPI: active interpreter +------+ ACPI: (supports the S0, S3 S4 S5) +------+ ACPI: IOAPIC using for interrupt routing +------+ ACPI : EC: non-query interrupt received, switch to stop mode +------+ ACPI: EC: Storm detected GPE, transactions will use polling mode +------+ ACPI: EC: GPE = 0x16, I/O: / order = status 0 x 66, data = 0 x 62 +------+ ACPI: EC: pilot started in interrupt mode +------+ ACPI: PCI [PCI0] root bridge (0000:00) +------+ ACPI: PCI Interrupt Routing Table [\_SB_. PCI0._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. P32_._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP1._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP2._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP5._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. PEGP._PRT] +------+ ACPI: PCI interrupt link [INKA] (IRQ 3 4 * 5 7 9 10 11 12) +------+ ACPI: PCI Interrupt Link [LNKB] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI interrupt link [LNKC] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI Interrupt Link [LNKD] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI : PCI Interrupt Link [LNKE] (IRQ 3 4 5 7 9 10 11 12) * 0, disabled. +------+ ACPI: PCI Interrupt Link [LNKF] (IRQ 3 4 5 7 9 * 10 11 12) +------+ ACPI: PCI interrupt link [LNKG] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI interrupt link [LNKH] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: power resource [FN00] (on) +------+ pnp: ACPI PnP init +------+ ACPI: type pnp registered bus +------+ pnp: ACPI PnP: found 8 devices +------+ ACPI : Type of non ACPI pnp bus +------+ PCI: use ACPI to IRQ routing +------+ ACPI: RTC may wake from S4 +------+ ACPI: [fan] (on) +------+ ACPI: SSDT BFD77C18, 026 (r1 PmRef Cpu0Ist 3000 INTL 20051117) B +------+ ACPI: SSDT BFD75598, 0537 (r1 PmRef Cpu0Cst 3001 20051117 INTL) +------+ ACPI: CPU0 (power States: C1 C2 [C1] [C2] C3 [C3]) +------+ processor ACPI0007:00: registered as cooling_device1 +------+ ACPI : processor [CPU0] (supports 8 throttling States) +------+ ACPI: SSDT BFD76E18, 01CF (r1 PmRef ApIst 3000 20051117 INTL) +------+ ACPI: SSDT BFD77F18, D 008 (r1 PmRef ApCst 3000 20051117 INTL) +------+ ACPI: CPU1 (power States: C1 C2 [C1] [C2] C3 [C3]) +------+ processor ACPI0007:01: registered under cooling_device2 +------+ ACPI: processor [CPU1] (supports 8 throttling States) +------+ ACPI : transition device [FAN] to D3 +------+ ACPI: thermal Zone [THRM] (44 c) +------+ ACPI: Power Button (FF) [PWRF] +------+ ACPI: Power Button (CM) [PWRB] +------+ ACPI: lid switch [LID0] +------+ ACPI: battery [BAT0] (battery present) +------+ ACPI: AC adapter / CC [ADP0] (online) +------+ peripheral acpi: 1B: registered under cooling_device3 +------+ ACPI: Video Device [VGA] (multiple heads: Yes Rome: no message: no) +------+ iwlagn 0000:03:00.0 : state changes by ACPI to D0 + power------+ ACPI: WMI: responsible Mapper +------+ iwlagn 0000:03:00.0: state changes by ACPI to D0 + power------+ ACPI: EC: lack of confirmation, cut the interrupt mode. +

• Satellite U300 connected to the TV - video format not supported

  I am using Toshiba Satellite U300-15 q and it has a vga output, so I bought a cable and a box that transfers analog signal to VGA to hdmi digital so that I can connect to my Sony TV are 32 '.

  But if I connect it it says on the tv in video format not supported in yellow letters.
  Why is this and how do I solve this problem?

  Throughout history the problem is you are using third party hardware or software so described this issue has nothing to do with your laptop computer Toshiba or Toshiba in general.

  On the mobile side is important, the video signal is sent to the right path. What will afterwards and why this signal is not transformed correctly falls within this box.
  What box are you using?

  In my opinion you should contact the manufacturer of this box and their support. They should know how it works and how to solve this problem.
  In General, Toshiba has nothing to do with this problem.

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• Card error"video or the driver does not support alpha separate mixture, glow will be disabled" when running COD4

  Original title: VGA

  When I run COD4 it says ' error during initialization: video card or the driver does not support alpha separate mixture, glow will be disabled.
  No idea why this is happening?

  There are maybe a few settings in the options/preferences menu of COD.  Your best way is to ask in a support forum for COD.

  In the future (or), before you buy a new game, visit Can You Run It to see if your hardware supports the minimum requirements of the game.

• signal not supported on tv (monitor)

  I changed my display settings, IE the refresh rate to something my LCD tv (which I use as a monitor) does not support... now I can't see the screen and cannot change back to settings tht work... what to do? safe mode does not work fr a reason any recovery won't work?
  I can see the windows startup screen and access the options of normal starting time, im under xp family.

  Hi yashwanthreddy,

  1. what happens when you try to start in normal mode?

  2. what happens when you try to start in safe mode?

  I suggest that you try to start the Activation of the VGA Mode and later uninstall the graphics card from the computer by using the Device Manager and restart the computer, check if it helps.

  See the Microsoft article below to find out how to initiate activation of the VGA Mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Problem UZ2715H monitor: current input synchronization is not supported...

  Can someone help me with this problem? -"Current input synchronization is not supported by the display. Please change your entry in 1920x1080@60hz or any other listed monitor calendar date according to the characteristics of the monitor. "I get this message when I run a game (for example I always get this message with CS GO), there are a few games that works fine however.

  I have Nvidia GTX 580 graphics card, windows 7 64 bit, so my pc and the monitor are connected with DVI - VGA (for the pc) adapter and VGA cable to the monitor.

  I tried to update the drivers for graphics cards, changing the resolution of 1920 x 1080 60 hz troubleshooting display... still the same problem...

  Any solution will be appreciated.

  Ok. A DVI to VGA adapter will not work. DVI cannot convert to RFP via a straight through cable. So, your only option is this =
  Computer DVI GTX 580 on-->--> UZ2715H HDMI DVI to HDMI Cable to

• Quicken essentials not supported

  I need a new program to replace Quicken Essentials. I upgraded to Sierra, and it is not supported. My needs are simple. I just need to follow my checks, deposits, withdrawals, bills paid etc... I would like to be able to import my backup Quicken Essentials. Can anyone suggest a program?

  Thank you.

  Quicken 2016 can import the data.

  (144948)

• iPhone is sim not supported

  Hello

  My girlfriend and I bought one to the iPhone in the United States a few weeks ago. We live in the Netherlands, so we asked for the correct model (A1723) and a sim phone so it should work on our carriers. We did not have a simcard nano of our carriers at the time so they have unlocked the phone with a card of sprint (without contract). Now, we're back in the Netherlands and we have tried our new SIM card and we get the "Sim not supported" error. It's almost as if the phone isn't sim for free. We called apple support in the United States and we talked for over an hour, and he could not understand the problem. According to him, the phone has been unlocked.

  We also called our subsidiary of KPN (simyo) carrier and they said everything was ok on their end, the problem is with apple. If we are really stuck here and I don't know what the problem is. Can someone me the phone is unlocked, because I'm still not convinced. And in this case, what should I do because the lady who helped us said it was free sim...

  Thanks in advance.

  Ruud

  Where did you buy this phone. It seems that if activation with the Sprint card has caused your question. But knowing where you bought it.

• SIM NOT SUPPORTED

  Dear Sir.

  Last week, I restored AND updated to LATEST iOS IN my iPhone 5 c through iTunes. Subsequently, I get the error message 'sim not supported. " Now, I could not use my iPhone. Phone IMEI is *. Please advise what I need to do?

  Thank you and best regards,

  Mostapha N,.

  Mob *.

  < personal information under the direction of the host >

  Your iPhone has been hacked to be used with other sim cards?

  Seems as if a jailbreak or other similar hack was in place to allow other carriers sim cards to work on it. When it has been updated the hack or jailbreak is removed.

  Your only option is to know what carrier its coastline and see if you qualify for them to unlock properly.

  Also please do not post your IMEI number in a public forum.

• I just bought an iPhone 4 and it's not let me download from the App Store because it says I need iOS 8 but the iPhone 4 does not support 8, how do I get apps?

  I just bought an iPhone 4 and now I can't download apps from the App Store because it says I need iOS 8 but the iPhone 4 supports ios 8, how can I download apps?

  Return the iPhone 4 and buy an iPhone more later from model.

  The iPhone 4 does not support any version of iOS iOS 7.1.2 above.

• Apple TV (4th generation) not supported

  My Apple TV (4th generation) worked very well, Soddenly I get message on television that not supported. I connect it to my computer and updated the software to 9.2.2 but still same message, any help

  Hello. Which is exactly the message you see? Are you sure that's coming from Apple TV and no the TV set? What do you do when you see the message?

• Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  The SIM card is not support indicates that the iPhone is locked to the American carrier that it has been activated with. In order to obtain the released lock it is necessary that you talk to the carrier to find out what their requirements are to release the lock. They are the only ones who unlock it so that it can be used with another carrier.