vGpu problem

Similar Questions

• You see only not the GPU under NVIDIA GRID vGPU profiles

  I followed the Guide of deployment of NVIDIA.  I installed the vib successfully on ESXi hosts and executed a command of nvidia-smi to confirm.  All right.  When I change the settings on the Image of gold, I see the attached picture.  What I am doing wrong?

  In addition, a potential problem may be allowed.  I see the GRID is supported only on vSphere Ent more and we run vCloud, vSphere Advanced Suite.  This is the first time that I never see this type of license.  Could it be the culprit?

  Thanks in advance for the help.

  I was able to understand.  I installed bad NVIDIA vib. I used the vSGA rather than vGPU drivers drivers.

• Horizon View 10, vGPU, Youtube freeze Windows Client

  Hello

  We have a problem with vGPU, Windows 10 and Youtube. When we open in IE or Edge a Youtube movie and change the setting to full screen, the customer will freeze.

  But we can connect with RDP to the customer frozen and restart the Agent from the view.

  Our environment:

  Network card: Nvidia K1

  Driver Nvidia on host and Client: NVIDIA-GRID-vGPU-kepler-vSphere-2015-352.70-354.56

  See the horizon Version: 6.2.0

  Same configuration with Windows 7 Client works very well.

  Any ideas?

  Kind regards

  Oliver

  We have a bug report opened with Nvidia GRID + view + Windows 10, the media playback in full screen.  There is active work to debug and fix this problem.  For now the only known workaround is to run media player or the browser in windowed mode.

• VGPU session disconnects with pcoip_server_win32.exe NvFBC.dll

  I run a proof of concept VGPU VDI using Horizon 6.1 and Vsphere 6

  
  

  I have only 8 test VDI users and the solution is running on the local network.

  
  

  Some users reported session disconnects and w hen I checked the event logs on the clients (windows 7 64-bit) the following are entries.

  
  

  Users can reconnect to the session almost immediately and no work is lost.

  
  

  I use some Autodesk products (Revit, Navisworks, etc.) on the clones related and so far, the results have been very good and it is only slight complaint.

  
  

  Someone at - it ideas?
  

  
  

  The failing application name: pcoip_server_win32.exe, version: 3.30.0.50438, time stamp: 0x54d1c88a

  The failed module name: NvFBC.dll, version: 6.14.13.4752, time stamp: 0x54d3ad55

  Exception code: 0xc0000005

  Offset: 0 x 00002474

  ID of the process failed: 0 x 3050

  Start time of application vulnerabilities: 0x01d09d05d59b60fa

  The failing application path: C:\Program Files\Common Files\VMware\Teradici PCoIP Server\pcoip_server_win32.exe

  Path of the failing module: C:\Windows\Syswow64\NvFBC.dll

  Report ID: fe48f786-092e-11e5-b5e4-00505695e34e

  
  

  
  

  
  

  Bucket of error, type 0

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: pcoip_server_win32.exe

  P2: 3.30.0.50438

  P3: 54d1c88a

  P4: NvFBC.dll

  P5: 6.14.13.4752

  P6: 54d3ad55

  P7: c0000005

  P8: 00002474

  P9:

  P10:

  Attached files:

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_pcoip_server_win_4265ee79b0dcca81767abba3972da7a250fe2_3f7a349a

  Table of contents preceding:

  Version = 1

  EventType = APPCRASH

  EventTime = 130777269154662904

  ReportType = 2

  Consent = 1

  ReportIdentifier = fe48f787-092F-11e5-b5e4-00505695e34e

  IntegratorReportIdentifier = fe48f786-092F-11e5-b5e4-00505695e34e

  WOW64 = 1

  1. Response.Type = 4

  SIG [0]. Name = name of the Application

  SIG [0]. Value = pcoip_server_win32.exe

  GIS [1]. Name = Version of the Application

  GIS [1]. Value = 3.30.0.50438

  GIS [2]. Name = timestamp of the Application

  GIS [2]. Value = 54d1c88a

  GIS [3]. Name = name of the Module fault

  GIS [3]. Value = NvFBC.dll

  GIS [4]. Name = Fault Module Version

  GIS [4]. Value = 6.14.13.4752

  GIS [5]. Name = Fault Module Timestamp

  GIS [5]. Value = 54d3ad55

  GIS [6]. Name = Exception Code

  GIS [6]. Value = c0000005

  GIS [7]. Name = offset of the Exception

  GIS [7]. Value = 00002474

  DynamicSig [1]. Name = OS Version

  DynamicSig [1]. Value=6.1.7601.2.1.0.256.48

  DynamicSig [2]. Name = locale ID

  DynamicSig [2]. Value = 2057

  DynamicSig [22]. Name = additional Information 1

  DynamicSig [22]. Value = 0a9e

  DynamicSig [23]. Name = additional Information 2

  DynamicSig [23]. Value = 0a9e372d3b4ad19135b953a78882e789

  DynamicSig [24]. Name = additional Information 3

  DynamicSig [24]. Value = 0a9e

  DynamicSig [25]. Name = additional Information 4

  DynamicSig [25]. Value = 0a9e372d3b4ad19135b953a78882e789

  UI [2] = c: Files\VMware\Teradici PCoIP Server\pcoip_server_win32.exe

  UI [5] = check online for a solution (recommended)

  UI [6] = check for a solution later (recommended)

  UI [7] = close

  UI [8] = PCoIP Server has stopped working and was closed

  UI [9] = a problem caused the application to stop working correctly. Windows will notify you if a solution is available.

  UI [10] = & close

  LoadedModule [0] = c: Files\VMware\Teradici PCoIP Server\pcoip_server_win32.exe

  LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll

  LoadedModule[2]=C:\Windows\syswow64\kernel32.dll

  LoadedModule[3]=C:\Windows\syswow64\KERNELBASE.dll

  LoadedModule [4] = c: Files\VMware\Teradici PCoIP Server\inputdevtap.dll

  LoadedModule[5]=C:\Windows\syswow64\ADVAPI32.dll

  LoadedModule[6]=C:\Windows\syswow64\msvcrt.dll

  LoadedModule[7]=C:\Windows\SysWOW64\sechost.dll

  LoadedModule[8]=C:\Windows\syswow64\RPCRT4.dll

  LoadedModule[9]=C:\Windows\syswow64\SspiCli.dll

  LoadedModule[10]=C:\Windows\syswow64\CRYPTBASE.dll

  LoadedModule[11]=C:\Windows\syswow64\USER32.dll

  LoadedModule[12]=C:\Windows\syswow64\GDI32.dll

  LoadedModule[13]=C:\Windows\syswow64\LPK.dll

  LoadedModule[14]=C:\Windows\syswow64\USP10.dll

  LoadedModule[15]=C:\Windows\system32\Secur32.dll

  LoadedModule[16]=C:\Windows\system32\WTSAPI32.dll

  LoadedModule[17]=C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCR90.dll

  LoadedModule [18] = c: Files\VMware\Teradici PCoIP Server\svgadevtap.dll

  LoadedModule[19]=C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCP90.dll

  LoadedModule [20] = c: Files\VMware\Teradici PCoIP Server\libidn.dll

  LoadedModule [21] = c: Files\VMware\Teradici PCoIP Server\pthreadVC2.dll

  LoadedModule[22]=C:\Windows\syswow64\WS2_32.dll

  LoadedModule[23]=C:\Windows\syswow64\NSI.dll

  LoadedModule [24] = c: Files\VMware\Teradici PCoIP Server\VMwareResolutionSet.dll

  LoadedModule[25]=C:\Windows\syswow64\SHELL32.dll

  LoadedModule[26]=C:\Windows\syswow64\SHLWAPI.dll

  LoadedModule [27] = C:\Windows\syswow64\PSAPI. DLL

  LoadedModule[28]=C:\Windows\syswow64\CRYPT32.dll

  LoadedModule[29]=C:\Windows\syswow64\MSASN1.dll

  LoadedModule[30]=C:\Windows\system32\dbghelp.dll

  LoadedModule [31] = C:\Windows\system32\IPHLPAPI. DLL

  LoadedModule [32] = C:\Windows\system32\WINNSI. DLL

  LoadedModule[33]=C:\Windows\syswow64\SETUPAPI.dll

  LoadedModule[34]=C:\Windows\syswow64\CFGMGR32.dll

  LoadedModule[35]=C:\Windows\syswow64\OLEAUT32.dll

  LoadedModule[36]=C:\Windows\syswow64\ole32.dll

  LoadedModule[37]=C:\Windows\syswow64\DEVOBJ.dll

  LoadedModule[38]=C:\Windows\system32\WINMM.dll

  LoadedModule [39] = C:\Windows\system32\IMM32. DLL

  LoadedModule[40]=C:\Windows\syswow64\MSCTF.dll

  LoadedModule[41]=C:\Windows\SysWOW64\vmwsci.dll

  LoadedModule[42]=C:\Windows\syswow64\profapi.dll

  LoadedModule [43] = c: Files\VMware\Teradici PCoIP Server\pcoip_crypto_non_fips.dll

  LoadedModule[44]=C:\Windows\system32\WSOCK32.dll

  LoadedModule[45]=C:\Windows\system32\CRYPTSP.dll

  LoadedModule[46]=C:\Windows\system32\uxtheme.dll

  LoadedModule[47]=C:\Windows\system32\rsaenh.dll

  LoadedModule[48]=C:\Windows\system32\dwmapi.dll

  LoadedModule[49]=C:\Windows\system32\mswsock.dll

  LoadedModule[50]=C:\Windows\System32\wshtcpip.dll

  LoadedModule[51]=C:\Windows\system32\NLAapi.dll

  LoadedModule[52]=C:\Windows\system32\napinsp.dll

  LoadedModule[53]=C:\Windows\system32\pnrpnsp.dll

  LoadedModule[54]=C:\Windows\system32\DNSAPI.dll

  LoadedModule[55]=C:\Windows\System32\winrnr.dll

  LoadedModule[56]=C:\Windows\System32\wship6.dll

  LoadedModule[57]=C:\Windows\system32\rasadhlp.dll

  LoadedModule[58]=C:\Windows\System32\fwpuclnt.dll

  LoadedModule [59] = C:\Windows\system32\dhcpcsvc. DLL

  LoadedModule [60] = c: Files\VMware\Teradici PCoIP Server\pcoip_mfw.dll

  LoadedModule[61]=C:\Windows\system32\VERSION.dll

  LoadedModule[62]=C:\Windows\system32\CRYPTUI.dll

  LoadedModule[63]=C:\Windows\system32\ntmarta.dll

  LoadedModule[64]=C:\Windows\syswow64\WLDAP32.dll

  LoadedModule [65] = c: Files\VMware\Teradici PCoIP Server\ViewMMDevRedir.dll

  LoadedModule[66]=C:\Windows\system32\credssp.dll

  LoadedModule[67]=C:\Windows\SysWOW64\msv1_0.DLL

  LoadedModule[68]=C:\Windows\system32\cryptdll.dll

  LoadedModule [69] = c: Files\VMware\Teradici PCoIP Server\VMwareView - RdeVchanStub.dll

  LoadedModule [70] = c: Files\VMware\Teradici PCoIP Server\pcoip_vchan.dll

  LoadedModule[71]=C:\Windows\system32\apphelp.dll

  LoadedModule[72]=C:\Windows\system32\ncrypt.dll

  LoadedModule[73]=C:\Windows\system32\bcrypt.dll

  LoadedModule[74]=C:\Windows\syswow64\USERENV.dll

  LoadedModule[75]=C:\Windows\SysWOW64\bcryptprimitives.dll

  LoadedModule[76]=C:\Windows\system32\GPAPI.dll

  LoadedModule [77] = c: Files\VMware\Teradici PCoIP Server\audiodevtap.dll

  LoadedModule[78]=C:\Windows\Syswow64\NvFBC.dll

  LoadedModule[79]=C:\Windows\system32\d3d9.dll

  LoadedModule[80]=C:\Windows\system32\d3d8thk.dll

  LoadedModule[81]=C:\Windows\system32\nvapi.dll

  LoadedModule[82]=C:\Windows\system32\nvd3dum.dll

  LoadedModule[83]=C:\Windows\system32\powrprof.dll

  FriendlyEventName = Stopped Working

  ConsentKey = APPCRASH

  AppName = Server PCoIP

  AppPath = c: Files\VMware\Teradici PCoIP Server\pcoip_server_win32.exe

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: fe48f786-092e-11e5-b5e4-00505695e34e

  Display state: 4

  Check out this post on the forum.

  VMware View 6.1 Zero-Client disconnect

  Newer drivers are available on the NVIDIA site to the link NVIDIA DRIVERS NVIDIA GRID VGPU SOFTWARE RELEASE 346.68/348.27 WHQL

  Only Windows drivers are updated and need to be updated. ESXi pilots remain the same.

• vGPU active VM powers on (nvidia card grid k1)

  Hi guys,.

  I have trouble to turn on/off my newly created victory 8.1 VM. (See the image below) Could you please help me solve this problem?

  "Disconnected from the virtual machine. An error was received from the ESX host turning on VM Win81prox64Base.

  Failed to connect to remote

  Impossible to establish a transport connection (9):

  There is no VMware process running for config file /vmfs/volumes/5525052 b - 8d6f4f5f - 799d - a0369f32813a/Win81prox64Base/Win81prox64Base.vmx. »

  

  Parameters of the virtual machine (see below)

  

  The server vCenter (below) event log shows

  

  VM summary (below)

  

  NVIDIA-smi output command to one of the hosts (below)

  

  The installed version of ESXi on hosts: VMware ESXi 6.0.0 build-2494585

  vSphere Web Client, I use the Version 6.0.0 build 2594327

  vCenter Server device that I use (below)

  

  We have vGPU material test of the system as described below:

  2 guests and on each host.

  -FUJITSU GROUND RX2540 M1

  -2 x Xeon of Intel (r) CPU E5-2670 v3 2.30 GHz

  -2133 MHz DDR4 128 GB memory

  -FC HBA

  -4x1Gbps NIC

  -2xNVIDIA GRID K1

  The two hosts connected to Netapp E2724 storage via FC SAN

  Thanks in advance for your help.

  Hmm, it seems to fail here:

  2015 05-12 T 17: 46:32.541Z | VMX | I120: vmiop_log: copy for the Init frame engine: synchronization...

  2015 05-12 T 17: 46:38.541Z | VMX | E105: vmiop_log: Timed out (SM 6001) synchronization attempt

  2015 05-12 T 17: 46:38.541Z | VMX | E105: vmiop_log: init: init framework copy engine error 7

  2015 05-12 T 17: 46:38.545Z | VMX | E105: VMIOP: vmiop Plugin - view initialization failed: 7

  2015 05-12 T 17: 46:38.545Z | VMX | I120: Module DevicePowerOn market failed.

  The server has the latest firmware of the bios? If so, is it possible to delete one of the K1:s and try again?

  Probably TheLoneVM or @krd have comments.

  Linjo

  
  

• vGPU/ESXi 6.0 "hardware GPU is needed but is not available."

  Hello

  I have problems turning on a virtual machine configured with hardware 3D rendering. It throws an error "hardware GPU is required but not available. The virtual machine will not start until the GPU resources are available or the virtual machine is configured to allow software rendering". I shrugged the 9 to 11 VM hardware version, just to see if it has made all the difference.

  I looked around and different people have had different problems but brave people here ask the same info, so hopefully provide below will help.

  [root@localhost:~] nvidia-smi

  Sat Apr 25 15:45:04 2015

  +------------------------------------------------------+

  | NVIDIA-SMI 346.42 driver version: 346.42 |

  |-------------------------------+----------------------+----------------------+

  | GPU name persistence-M | Bus - Id Disp.A | Volatile Uncorr. ECC |

  | Fan Temp Perf Pwr:Usage / Cap |         The memory usage | GPU-Util Compute M. |

  |===============================+======================+======================|

  |   0 GRID K1 on | Off 0000:04:00.0 |                  N/A |

  | S/O 39 P8 10W / 31W |     10MiB / 4095MiB |      0% by default.

  +-------------------------------+----------------------+----------------------+

  |   K1 GRID 1 on | Off 0000:05:00.0 |                  N/A |

  | S/O 40 C P8 10W / 31W |     10MiB / 4095MiB |      0% by default.

  +-------------------------------+----------------------+----------------------+

  |   GRID 2 K1 on | Off 0000:06:00.0 |                  N/A |

  | S/O 33 P8 10W / 31W |     10MiB / 4095MiB |      0% by default.

  +-------------------------------+----------------------+----------------------+

  |   GRID 3 K1 on | Off 0000:07:00.0 |                  N/A |

  | S/O 34 C P8 10W / 31W |     10MiB / 4095MiB |      0% by default.

  +-------------------------------+----------------------+----------------------+

  +-----------------------------------------------------------------------------+

  | Process: GPU memory.

  |  The name of Type PID GPU use process |

  |=============================================================================|

  |  No common process found |

  +-----------------------------------------------------------------------------+

  gpuvm [root@localhost:~]

  Xserver unix: 0, 0:4:0:0 PCI ID, vGPU: not defined, the maximum memory of GPU 4183620 KB

  GPU memory left Ko 4183620.

  Xserver unix: 1, PCI ID 0:5:0:0, vGPU: not defined, the maximum memory of GPU 4183620 KB

  GPU memory left Ko 4183620.

  Xserver unix: 2, ID PCI 0:6:0:0, vGPU: not defined, the maximum memory of GPU 4183620 KB

  GPU memory left Ko 4183620.

  Xserver unix: 3, PCI ID 0:7:0:0, vGPU: not defined, the maximum memory of GPU 4183620 KB

  GPU memory left Ko 4183620.

  [root@localhost:~] cat /var/log/vmkernel.log | grep nvidia

  (2015 04-25 T 15: 15:14.942Z cpu1:33338) loading module nvidia...

  (2015 04-25 T 15: 15:14.947Z cpu1:33338) Elf: 1865: module a license NVIDIA nvidia

  (2015 04-25 T 15: 15:15.017Z cpu1:33338) CpuSched: 592: latency 33339 tq:nvidia_timer_queue user 0 changed by 33338 vmkeventd-6

  (2015 04-25 T 15: 15:15.269Z cpu1:33338) device: 191: registered driver "nvidia" from 19

  (2015 04-25 T 15: 15:15.269Z cpu1:33338) Mod: 4942: nvidia initialization succeeded with module ID 19.

  (2015 04-25 T 15: 15:15.269Z cpu1:33338) nvidia loaded successfully.

  (2015 04-25 T 15: 15:15.503Z cpu15:33337) device: 326: find nvidia for device 0x281c4302a6589365 driver

  (2015 04-25 T 15: 15:15.541Z cpu15:33337) device: 326: find nvidia for device 0x4eaa4302a65895fc driver

  (2015 04-25 T 15: 15:15.579Z cpu15:33337) device: 326: find nvidia for device 0x7c044302a65898cd driver

  (2015 04-25 T 15: 15:15.616Z cpu15:33337) device: 326: find nvidia for device 0x2dfe4302a6589b17 driver

  NVRM: nvidia_associate vmgfx0

  NVRM: nvidia_associate vmgfx1

  NVRM: nvidia_associate vmgfx2

  NVRM: nvidia_associate vmgfx3

  (2015 04-25 T 15: 15:50.363Z cpu11:35362) IntrCookie: 1852: cookie 0x3a moduleID 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:51.041Z cpu11:35362) IntrCookie: 1852: cookie 0x3b moduleID 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:51.693Z cpu11:35362) IntrCookie: 1852: cookie 0x3c moduleID 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:52.385Z cpu11:35362) IntrCookie: 1852: cookie 0x3d moduleID 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:54.655Z cpu7:35676) IntrCookie: 1852: cookie 0x3e moduleID 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:54.871Z cpu7:35676) IntrCookie: 1852: cookie 0x3f moduleID 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:55.084Z cpu7:35676) IntrCookie: 1852: cookie 0 x 40 moduleID 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:55.302Z cpu7:35676) IntrCookie: 1852: cookie 0 x 41 moduleID 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:56.431Z cpu24:35841) IntrCookie: 1852: cookie 0 x 42 moduleID 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:56.667Z cpu24:35841) IntrCookie: 1852: the moduleID cookie 0 x 43 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:56.897Z cpu24:35841) IntrCookie: 1852: cookie 0 x 44 moduleID 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:57.125Z cpu24:35841) IntrCookie: 1852: cookie 0 x 45 moduleID 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:58.255Z cpu6:36015) IntrCookie: 1852: cookie 0 x 46 moduleID 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:58.478Z cpu6:36015) IntrCookie: 1852: cookie 0 x 47 moduleID 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:58.695Z cpu6:36015) IntrCookie: 1852: cookie 0 x 48 moduleID 19 < nvidia > exclusive, 0x1d flags

  (2015 04-25 T 15: 15:58.914Z cpu6:36015) IntrCookie: 1852: cookie 0 x 49 moduleID 19 < nvidia > exclusive, 0x1d flags

  [root@localhost:~] esxcli list vib software | grep nvidia-i

  NVIDIA-vgx - VMware_ESXi_6.0_Host_Driver 346, 42 - 1OEM.600.0.0.2159203 NVIDIA VMwareAccepted 2015-04-25

  Enjoy every thought, that everybody can have!

  Thank you!

  Kim

  Ah, ok.

  'material' in the VM configuration means vSGA, which might not be obvious, but it's like that.

  To use vGPU, you must add a new device to the virtual machine and select the vGPU profile that you want to assign, you must set the graphics in 'software '.

  Linjo

• 6 ESXi, nVidia GRID, vCSA and problems of Console mouse

  All,

  I'm running into a problem with the mouse on my VDI machines control deployed with GRID NVidia GPU in k-1.

  The machines I deployed with the GPU K1 can no longer be controlled by using the console.  Either thick client or web client.  The servers that are running on the same host are fine, but anything with map GRID on it, fails to display the mouse in Console.

  Rotates through the documents best practices for GRID map and all parameters seem to be good.   Also tried to re - install (uninstall, reinstall) VMtools.

  Any help is appreciated.

  Thank you!

  You will lose the console if you use vGPU or vDGA on a virtual machine.

  I suggest to use another way to on these remote administration, Remote Desktop for example.

  Linjo

• vSphere 6 / 6.1 Horizon / vGPU Office assignment

  Hello community,

  I have a question regarding vGPU deployments. I have a server with two K2 and I want to use the 8 Virtual with the profile K240Q workstations and 16 virtual desktops with the profile of the K220Q.

  This attribution of profile would fit perfectly in the two K2 (GPU0: 4xK240Q, GPU1: 4xK240Q, GPU2: 8xK220Q, GPU3: 8xK220Q).

  I saw, if I boot four virtual desktops K220Q, view environment starts a K220Q by gpu physical profile, which makes it impossible to launch another virtual desktop K240Q because different profiles can be shared on the same physical unit of GPU.

  Is anyone else found this problem?

  Best regards

  Michael

  If you plan to support for the types mixed vGPU on one system, you can change the investment strategy.

  On the ESX host, add "vGPU.consolidation = true" to the file/etc/vmware/config.

  With this policy, as VMs will be assigned to a physical GPU until it is fully charged.

  Linjo

• Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem?

  How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?

  Hello wdemetris,

  Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.

  As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.

  Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.

  If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.

  Thanks again and have a great rest of your day.

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• MacBook Pro display problem

  Hello members of the community.

  As of recently, I have noticed some glitches when feeding on my MacBook or awakened from his sleep.

  The colors are distorted, usually with pink, green, or yellow blobs. Blobs cannot entirely replace the colors, they appear to be contained in a element would normally be. For example. the menu bar will be partially pink and white, but pink does not leave the menu bar in this area, and the Office has green lines on it.

  I tried to take a screenshot, but the problem resolves in about 20 seconds, but it's a recurring problem.

  It happens when I wake up, connection or not. I had also certain powers serious and problems of performance, such that my MagSafe LED would not illuminate when plugged on rare occasions, fan could turn unnecessarily, graphics performance were SUPER slow, and the health of my battery was running out quickly. I actually ran a report on the system at 2 different times and my quality of full load is depleting of 1.2% per charge cycle, which is very worrying. I went from 6281 mAh mAh 6138 maximum capacity after two cycles of load. I'm tracking closely it because at this rate, my battery will survive only at load cycles about 150 instead of the 1000 expected, gives me the idea that this could very well be a bad battery. The computer is also warm to the touch while you sleep, not connected to the power supply. I NAP active but even taking into account should not be hotter my iPhone did the same thing.

  I have reset the SMC, and it solved a couple of problems. The charger works fine now and my performance improved considerably (which made me feel better, either it is a high-performance laptop, a 11-inch MacBook Air should not he surpass), and battery life has improved. I feel even if it uses a lot of power in his sleep. Maybe I need to turn off the NAP and see if that makes a difference. The graphic bug still persists however, and I don't have enough time to see if the max battery is depleting again.

  In regards to the bug, is there something that can be done? Basically, I want to assure you that I took all appropriate measures or if someone else has this problem to see if it can be software related instead of my computer.

  I have the entry level MacBook Pro with the retina, last generation.

  Any constructive contribution welcome!

  See you soon.

  -adreaux

  Hello bernardn753,

  After reviewing your post, it seems that you are having problems with the screen showing strange things on it. Looks like you already have a troubleshooting. I recommend you read this article, as reset NVRAM would be to reset your screen resolution settings that should help.

  How to reset the NVRAM on your Mac.

  Thank you for using communities of Apple Support. Good day.

• with IOS 10.0.2 - 5s iphone Bluetooth problems

  Since upgrading ISO 10.0.2 my M50 from PLT Plantronics (helmet unique headset) do not reliably connects with my iPhone 5 more. I have to go to the settings, activate bluetooth turned off/turned on, touch the device on the bluetooth page, etc. Once it connects successfully, it will reconnect (if I turn off the headset and turn it back on) for a short period. The next day he does not connect itself but I play with bluetooth on the iPhone again.

  It has always worked perfectly before the 10th of IOS.

  And, as I noticed others mentioning, the volume is much lower with IOS 10. The maximum volume is much lower. I can barely hear it now, more normal background noise, while driving.

  I did:

  Forget this device for the PLT M50 and paired again (several times)

  I did a Reset Network Settings

  I don't know what else to do - but it's a 10.0.2 IOS issue.

  Hello AppleUser2k,

  Please ask questions about your problems of connection between your iPhone and your Plantronics headset since you upgraded to iOS 10. I understand how important it is to have your Bluetooth devices connect with your iPhone with reliability. Here's what I recommend.

  The first thing we want to make sure is that all your data is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try the troubleshooting steps in this article to help: get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device should also check with the manufacturer that the device has all the drivers and firmware to work with the new version of iOS.

  If you have checked everything and that you have installed the latest firmware or driver and always are problems, please be aware of your surroundings when you encounter these problems. If you can isolate the time or location, you see the problems, you can isolate the cause. You can even see this help article to ensure that you are not affected by outside interference: the potential sources of Wi-Fi and Bluetooth.

  Thanks again and have a great rest of your day.

• Problem after update 10.0.2 iOS iPhone touchscreen

  After I have updated to iOS 10.0.2, I noticed a problem with the touch screen. Using the position of the image on the right side, near the corner, the toushscreen does not work.
  For example: when you use the keyboard, I can't type the letter 'P', have trouble typing BACKSPACE. Using the Contacts app, I can't scroll through using the alphabet bar.

  Do what idea of the problem?

  Kind regards!

  Hi fabriciorela,

  Thanks for the upgrade to iOS 10! I understand that the right of your screen is unresponsive to the touch. You can try the steps in this link to fix the problem. If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If it does not help the problem, try to restore the device to factory settings. I would like to backup your important data first.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Please use the Apple Support communities to post your question. Let us know how it turns out. Have a great day.

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• 2 iphones on one iTunes, problem of photo icloud account

  OK, my brother-in-law just updated its OS on his Iphone. He shared an Apple ID with his wife, who has his own iPhone. They all have two backup only in iCloud. His problem is that his wife photos are now on his phone. How can he fix it?

  Get its own identifier Apple- create and start using a Apple - Apple Support ID