VI lock will not respond or don't work anymore.
I have a vi that I created to calibrate a measured voltage. I have 3 buttons that the user down to set the Volt for 3 different ranges. The 3 buttons trigger a structure to capture the event data. When I click on the second button everything crashes. I can't stop the vi with the button stop or anything else. I have to right click on the tab labview at the bottom of the screen and close it. I checked the code for the second button, but I can't find something different than the first which works very well. Any suggestions as to what could happen. I just started to use Labview for my debugging skills are not very good. Thank you.
I think I may have found the problem. I had 2 event structures in a loop. The other out and it seems to work better.
Tags: NI Software
Similar Questions
-
Windows XP will not respond to the keyboard or the mouse. Why it is not working.
Well, I have the version of Windows XP Home Edition-32, Service Pack 2. I bought a keyboard gear yesterday with a mouse optical usb Dynex. My old keyboard and mouse were completely irreparable; I threw the. I plugged my new usb devices. When Windows has finished loading need me for my logon screen. However, my mouse and keyboard will not respond. This prevents me from going further. In addition, they will not respond during startup, the BIOS or the Windows Advanced Options Menu. I don't have a recovery disk. I bought the computer with XP already on this subject, so I do not have the disk to the operating system. What is my next step?
I bought PS/2 devices, and they work perfectly. Thanks for the tip.
-
How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.
Use this tutorial:
http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html
Go to method 3.
3. for the network icon.
(B) to activate the icon network - Enable_Network.reg< click="" to="">
* Don't forget to restart to complete the procedure. ***
-
Hello, I recently tried to do an advanced start safemode, because when I tried to do safe mode by pressing F8 it would have not responded to the command. Then I did a MSconfig, lit manually in safe mode, so I can then restart and do a scan to search for viruses or hackers of air because he had a reason to suspect. Now, after the manual switch, when I rebooted all I get is a black screen. No logo, nothing. When I press the buttons for the controls at first upward, it beeps at me and that's it.
Done, I have XP, not Vista, don't know if it makes much difference or not, but that's exactly what I did.
Is went to start, click Run, type msconfig, went to the utility system configuration, general tab selected, then the system of services. Then selected drivers devices of loading at startup Safemode-minimal database, and then click OK. Then, the computer said I had to be logged as administrator for these changes to take place and to connect and make changes. I was already logged as admin. so I advanced and restarted the computer and that's when I got black screen, no splash screen, no logo, no cursor.
I just read that I could have possibly messed up by not checking the VGA mode in order to be able to communicate in this mode, I don't know if it is correct or not.
I have my recovery discs, I've tried this morning, following their directions and it will not respond to one of these orders either.
I don't understand, why... it was working fine before I did it, but like I said I suspected a virus or a hijacker, but my Norton 360 and SuperSpyware nothing not detected in normal mode. That's why I tried to safe mode.
Here is the vista forums
Try the forums xp on the link below
http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4
Answers by topic
- Office & Customization
- Files, folders, & search
- Game
- Hardware drivers &
- Install, upgrade, and activate
- Internet Explorer
- Music & Sound
- Networking, mail, electronic, & updated online
- Maintenance & performance
- Photos & Video
- Programs
- Security, privacy, and user accounts
- System repair & recovery
- TV and movies on Windows
- Windows Update
Walter, the time zone traveller
-
Original title:
I have a folder on my desktop and added 5 PPTX files. I open the folder so I can see all the files, double-click on one to change, and then save it again in the same folder. Then I close the Powerpoint application. Now the Explorer window of window (which I opened before) will not respond. It clicks when I click it. I can't close or access any of the files inside. Any ideas? My computer still respond as usual.
64 bit OS
Hello
You did changes to the computer, before the show?
Method 1:
Step 1: Safe Mode
Start your computer in safe mode and check the number.
Start your computer in safe mode
Step 2: Clean boot
If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.
Method 2:
Refer to this link.
Error: Windows Explorer has stopped working
Note: Please skip the step that offers to perform a upgrade in Place, for now.
Method 3:
Change the location of the folder and check.
-
iTunes will not respond on Macbook Pro
My iTunes will not respond when I hit the play button. My version of iTunes is 12.4.1.6. It worked when I bought my mac, but now, he won't answer. It works on my iPhone, but not my Mac. Any suggestions?
iTunes you know on a Mac does not run on an iPhone. It's a completely different operating system. It is also a completely different application that Apple in a fit of lack of creativity has given the same name as the thing on a computer, but it's a different function.
You have restarted your computer?
-
With Firefox my fonts e-mail decreased and will not respond to reset, but problem disappears when you edit from Internet Explorer. This happened with no incentives from me about two weeks ago, and no resets respond to the email. Occurs only with Fox. With ie I enlarged and adjustable policies.
Have you tried to resize the text size by pressing CTRL and + at the same time (increase font size)?
Otherwise, you can reset Firefox on its default settings by following the steps here: https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems
-
Satellite Pro L450D black screen and will not respond to any keys
Hello
My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.
Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.
A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.
As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:
+ Windows 7 +.
+ Recover Windows to Factory Settings [active EMS] +.So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.
I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.
I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.
Any help would be grateful.
Hello
Have you tried the option of HARD drive recovery?
If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.I hope it will work!
-
Outlook express opens but will not respond to anything I try to do
Outlook express opens but will not respond to anything I try to do
You may have a damaged identity especially if it's the default main identity. File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.Note: Do not use the main word in the name of the new identity. -
I have a Dell dimension running XP and IE8 will not respond
I have a Dell Dimension 4500 XP pro and IE8 will not respond.
When I click it it flashes up on top of the screen and disappears. To this effect, I can't watch the updates from Microsoft.Any ideas, anyone please?
Delete.
Hi guys,.
It seems that my problem is solved.
I removed a lot of the years of updates then run my drive setup and turned off and went to bed.
When I turned on this morning I had to install updates. It was the only thing I was worried, and as this seems to be fixed, I am glad I use Firefox as my browser.I installed Speccy and he ran and it shows as running windows updates and it works correctly.
Thanks a lot for all your help guys.
Delete.
-
Can't connect, connection startup screen will not respond to mouse clicks or keyboard
I do not have a DVD to boot from. I use a laptop (Acer Aspire 5610). The keyboard and mouse are internal. Any suggestions at all? I tried the Safe Mode, Mode safe mode with guests hoping to type rstrul.exe, but never had the guest. He went directly to the display of connection with my daughter and my icons. I have added no new material.
Separated from the:
Have you shot inadvertently carpet of mouse/keyboard. This can happen through the Fn key on some laptop models. Find the picture on the key Fn, should give a clue.
You can borrow or buy a usb KB and mouse that you would at least pass by troubleshooting?
Tricky
-
My keyboard and the touchpad are locked, does not respond to what it is.
My keyboard and the touchpad are locked, do not respond to what it is. I activated the screen keyboard on and it works. It is a G71-340US, Windows 7. I think it happened when the battery died while in a Word doc. computer is turned off. Plugged. Turned, password screen appears, could not type anything in the box. The mouse works. My keyboard and the touchpad are locked, do not respond. Restarted, no help. Pulled the battery, no help. At least I can use the keyboard to the screen! Thanks for your help.
Did a restore of the system and all is well! Went back 3 days of the last update of windows. I hope this helps others!
-
SYSTEM WILL NOT RESPOND FOR 1 MIN AFTER THE CONNECTION
Once connected to my system after a reboot it will not respond for atlesat 1 minute. I can open some software like firefox... but I can't open Control Panel or modify a system
Hi mohdrafi,.
(a) since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?
This problem may occur because of the conflict between the hardware or programs on the computer.
To refine the question, I suggest you try the following steps:
Disconnect all external devices, mainly USB devices except for devices such as the mouse and keyboard.
Check if the problem persists,
Step 1: Disable security software, follow the steps mentioned below
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Activate security software once the test is completed.
Step 2: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below.
Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
If everything works properly in safe mode, you can deduce that some third-party services are at the origin of the problem.
Step 3: Put the computer to boot to figure out program causing problem.
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software
Important: n ' forget not the computer to start normal follow step 7 in the link.
For more information, see the link below:
What to do if Windows does not start successfully
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
This might interest you:
5 ways to speed up your PC
http://www.Microsoft.com/atwork/maintenance/speed.aspxThank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
CPU on HP p6130y will not respond unless I have unplug and reconnect.
CPU will not respond unless I have unplug and reconnect. The power light turns on but the screen remains black. Monitor works. Sometimes it will come around after a disconnect - reconnect. This morning I had to unplug and reconnect six times before would respond to the computer. HP model p6130y. AMD Phenom 9750 Quad Core processor. Windows Vista.
23Scorpio wrote:
Hi old_geekster and thanks for your reply. I tried to find a site that has the power to my computer and I'm having no luck. Same HP does not list that they carry the power supply for my p6130y. You have no idea where I can get this? Do you know how much it costs? Thanks again.
___________________________________________________________________________________________
23Scorpio, it's my pleasure.
You should be able to use any standard ATX PSU in the computer. I suggest to measure the current PSU and comparing measures that you choose. I like Corsair and OCZ. The PSU is the backbone of the computer, it is not the place to save money. Both in the links I provided are good examples of what you can use. Read the reviews to see what users have to say about them.
If your problem is solved, please click "accept as a Solution.
-
Dreamweaver CC 2015 does not open. It freezes at the opening and wrote "the program will not respond" anyone have an overview? I used it for a month without any problems and then today it will not open.
Thank you Nancy O. This proposal has helped me. Dreamweaver is unresponsive to the launch. Not sure what happened because it was working fine last week. Restore preferences enabled him to proceed as usual.
For Windows users: find the executable on your system in Dreamweaver. Press and hold the Key Windows + Ctrl + Shift while launching this (double click).
Maybe you are looking for
-
Toshiba 37RV753 and wall mounting
Hello a know what size screws I need for this old Toshiba TV wall mount. I looked in the manual, nothing there.Also called helpline and they also said they don't know. Would appreciate any help.See you soon
-
WRT160N + RTP300 + questions with others for access with PSP and teamspeak
Seen with the RTP300 Vonage phone service, I was able to port forward to allow TeamSpeak work properly. In other words, others may join my server. I installed the WRT160N, with a secure network, to work the long side of the RTP300 last night and now
-
official unlock service for W8 (E16i) bootloader
Why? Why NO free official only unlock service BL for my unit?
-
Where is the Planner in the solution 3.3.003 lenovo Center?
I've just updated Lenovo Solution Center version 3.3.003? I'll may be blind, but I can't find the Scheduler. Where is he? Thank you.
-
How can I find this driver pci?
PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01ND drivers unknown I have?