Does not receive Bean in sight in the ADF

Similar Questions

• DesignJet 9050 does not receive task until you press the Cancel button

  Now I don't know if it's our RIP software or the printer, but it almost seems that it is the printer that does not.  The RIP will try send a job to the printer, but the printer just sits in the ready state.  If I hit the button cancel on the printer once, it's like that he wakes up and he began receiving and printing of the task.   It does not happen with all the jobs, but it happens rather frequently.

  Someone at - he experienced something like that as well?

  This forum focuses on the level of consumer products.  For the Designjet you can have better results, post in the forum HP Designjet here.

• Browser scrolling does not appear on a page of the ADF

  Hello

  I develop this ADF page if its open on a computer with not enough resolution the whole page does not appear and the browser doesn't not watch to the top of the vertical scroll bar to see this bellow.

  Here I put some pictures to explain more clearly:

  • Here´s how it should look, everything is OK

  

  • But here... in some computers the resolution isn't enough (even not maximizing the window) if the page is trimmed and the browser shows not the vertical scroll bar, so that the user can't see whats below:

  

  What can I do to fix this?

  How did your page structured in terms of layout components.

  Try to use a set panelGroupLayout to scroll to surround the area that you want to enable scrolling in.

• Does not receive ODI login name in the new window Server Session

  Hi all
  
  I have installed ODI 11 g in Windows Server 2008, created Master & repositories work, also developed a few interfaces. Now, there's another developer, connect to the remote Windows (via the Terminal Services) server. But he did not get one of the names of connection created.
  
  It develops the same connection name pointing again even Master & repositories work for achieve developed interfaces?
  
  Please help me.
  
  Thank you
  MT

  It is a hidden folder, you must change the settings in your preferences folder to display it.

• OME does not receive details of the inventory and the State for some devices

  OME does not receive the details of the inventory and the State for some servers.

  For example when looking at one of our PowerEdge R620s is all that presents itself:

  

  iDRAC firmware and LCC is updated (version 2.21.21.21 is installed.)

  I reset the iDRAC, and that did not help.  I have no problem with most of the other R620s in the same range of discovery.

  I deleted the object to OME and re-discovered twice over the past week it but did not help.

  Things seem ok when I use the troubleshooting tool:

  

  Anyone has any info on what may be going on here or how to fix this?

  Thank you

  Hello

  Thanks for the details in the post.

  Wanted to check what version of OME use you - OME 2.1?

  If so, this behavior with ws - man discovery could potentially due to expiry of certificate on this device. You can launch the iDRAC user interface and confirm the certificate information.

  2.1 the OME, the WS - Man communication component is updated. The most recent component does not communicate with the device if that device has been exceeded in the certificate.

  Sslresetcfg running via racadm will reset the certificate. For details and solution, see same threadhttp://en.community.dell.com/techcenter/systems-management/f/4494/t/19653767 .

  Let us know if that helps.

  Thank you
  Vijay

• EX 60 does not receive the CUCM phonebook directory

  Cisco EX60 is registered on the CUCM, but it does not receive the phone book. IP phones receive the directory.

  Cisco Services for user data is active and running.

  CUCM system version: 9.1.1.20000 - 5

  EX60 software version: TC6.3.1.f768649

  You must mention the URL of the directory on your EX60 in order to extract the CUCM directory.

  EX60 login go to Configuration > server directory > URL and mention of the URL in this format:

  https://: 8443/cucm-uds/users

  First, you can test by opening this URL in a browser to verify if it is correct.

• Receiving UDP does not receive messages

  Hello. I have problem with UDP receiver.

  I can receive messages from the same port you write.

  Stream: open vi--> vi--> read vi UDP UDP writing.  Transmitter and receiver usinf th test port.

  When I try to use vi UDP listen port to just read, I get all the data.

  Program flow. I use vi to send the command on the serial port to MCU. Answer MCU return by sending data to the network port using UDP.

  I start vi to listen to a port UDP (see attached), then I sent the order to MCU. I can see the response on Wireshark, but UDP vi does not receive anything.

  I checked the IP address. Lokks all the same. IP address of the PC and decice is the same as when I write and read at the same time. Any other port.

  Any help please.

  Is the port that you want to use to open? For safety that many IT services will be blocked in ports that don't think they are necessary, or don't want to use.

• I have Windows 7 and the 2007 Microsoft Office Suite Service Pack 1 (SP1) update always fails. Also Microsoft Office Outlook often does not open without having to restart the pc. ___

  I have Windows 7 and the 2007 Microsoft Office Suite Service Pack 1 (SP1) update always fails.  Also Microsoft Office Outlook often does not open without having to restart the pc.

  Hi hound3101,

  Welcome to the Microsoft Answers community.

  a. you are able to install some other updates?
  b. do you receive error messages when you start Microsoft Office Outlook?

  If you have a problem only in the Office Update installation, then I suggest you to report your problem in the Office Discussion groups. If not, try download office update from the link below and install it in clean boot mode.

  Link to the Group Discussion Board: http://www.microsoft.com/office/community/en-us/FlyoutOverview.mspx

  To enter the mode of clean boot of your computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after starting the computer, install the update.

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• DV6 quick launch button mute does not work properly. He puts the speakers muted, but does not change color.

  Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color.  It's still orange, not mater if your speakers are on or off.   His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.

  I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there.  The problem is about 2 weeks old.   Have not added any new software that I know.  But computer installs updates as received.

  Simon

  Hello

  First download the audio driver by using the links below and save the installer to your desktop.

  Audio driver - Windows 7

  Audio driver - Windows Vista

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Is it possible to access the Microsoft Money 2005 file, if it does not accept your correct connection on the credential?

  Original title: Microsoft Money 2005 file logon.

  Is it possible to have access to your Money 2005 file if if does not accept your correct connection on the credential?

  Hi ChaserUP,

  Have you made changes on thecomputer before this problem?

  (a) If you use Windows Live ID, you can follow this link & check if the problem persists.

  Errors that you receive when you try to open Money by using your Windows Live ID credentials

  (b) if the problem persists, I recommend you contact Microsoft Money support for assistance.

  Hope the helps of information.
  Please post back and we do know.

• Home phone does not receive calls since I've implemented HP 7520

  I can't receive calls since I installed the HP7520. I tried to change the settings in fax several times. The phone rings on the end of the appellant to another and they can leave me a voice message (via the phone system) but the phone does not ring on my end (in the House) and the caller ID shows either of the appellants. I tried all the different settings fax too. and a sample fax comes through when I do the "Fax Wizard.  I called my phone, and, as expected, they were no help.

  Thank you

  I'm sorry that you are experiencing this issue. I would like to ask you some questions to see if you have everything set up correctly.

  1. do you have a facility with the internet, phone and cable set (modem and everything).

  2. do you have an answering machine plugged anywhere?

  You should have the printer set in place by the following text:

  1. line 1 on the printer should go directly to the wall outlet (or LINE 1 on the modem, if you bundle).

  2. the phone should go straight into the LINE 2 of the fax machine.

  3. settings in your fax can be given to the way that you want.

  4. go to your fax advanced settings.

  5. turn your Error Correction Mode (ECM) - OFF

  6. put your FAX SPEED to SLOW

  7. your rings before answer may be what you like.

  Let me know if it helps.

• CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

  I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

  Hello

  Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
  1st in the boot order (remember to put it at the time where the fact).

  Then put in a DVD to boot Windows and see if the driver works.

  If it doesn't then it's a hardware problem.

  =======================================

  If the drive has worked in the test above, that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I got the message "the u of typed password does not meet password policy requirements, check the minimum password, the password complexity and password history requirements" when changing password

  Original title: password problem

  When I try to write a new password on my windows ultimate 7, I received this message.

  "the u of typed password does not meet password policy requirements, check the minimum password length, password complexity and password history requirements"

  What can I do? I can't change my password :(

  Hi MedoXW,

  This means that you must create a password that meets all of the requirements

  1. make sure that the password is at least 6 to 8 characters.

  2. make sure that the password includes at least 1 capital letter, 1 number and a symbol as "!" or "$".

  3. make sure that the password is not one that you have used in the past.

  Follow all these rules and it should work.

  I hope this helps.

• Ensuring that my dealer does not receive a ton of bounceback notifications

  The last email Eloqua I sent my seller has said that received hundreds of escalation notifications by e-mail. I'm 99% sure that this has happened, because I put the display address ('From') be his email address. Normally, we put the display address ('From') to be our generic Inbox that verifies the customer service.

  I want to just make sure my dealer does not receive hundreds of notifications bounceback on my next emails. I'm sure as long as I do not have his email the display address ('From') on the ground, on the right?

  If you are in E9 as indicated by the category selected for your post? If so, you must go details by e-mail and specify an e-mail address to respond to custom. There is a section called 'Headers of email sur-reponse' and this is where you can check a box to customize the address and make the change. See attached screenshot.

  If you are on the E10, you open the settings box in the menu of the machine and this is where you change e-mail rΘpondre α in E10.

  

• Rconfig fails with "DEST ARCHIVE LOG does not exist on all nodes of the cl.

  Dear Sir
  
  I am to convert a single instance database RAC
  Next Note:
  Using Oracle 10 g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12
  DOC - ID: 388577.1
  
  
  the trial seems fine until I got this error.
  This directory is only one instance and the binary FCAC did not have a configuration database, and then how do I receive this error
  < Microsoft.PowerShell.Commands.GetChildItemCommand >
  U01/Oracle/Gold/DB/apps_st/Data DEST ARCHIVE LOG does not exist on all nodes of the cluster
  
  Please give us a solution.
  Thanks in advance.
  
  
  Here is the ConvertToRAC.xml
  
  [dgold@ebs64 u01] $ ConvertToRAC.xml more
  <? XML version = "1.0" encoding = "UTF-8"? >
  < n: RConfig xmlns:n = "http://www.oracle.com/rconfig".
  xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance".
  xsi: schemaLocation = "http://www.oracle.com/rconfig" >
  < n: ConvertToRAC >
  <!-check is a precheck to ensure that all prerequisites are met, before the con
  version is attempted. The allowed values are: YES | NO. | ONLY->
  < n: Convert check 'ONLY' = >
  <!-specify current database OracleHome no cars to-> SourceDBHome
  < n: SourceDBHome > /u01/oracle/GOLD/db/tech_st/10.2.0 < / n: SourceDBHome
  >
  <!-OracleHome specify where should be configured in the rac database. It may be in Africa
  me as a SourceDBHome->
  < n: TargetDBHome > / u01/ora/GOLD/db < / n: TargetDBHome >
  <!-SID specify no rac database and credentials. User with the sysdba role is req
  receipt to achieve a conversion->
  < n: SourceDBInfo SID 'OR' = >
  < n: Credentials >
  sys < n: User > < / n: User >
  Oracle of < n: Password > < / n: Password >
  SYSDBA < n: Role > < / n: Role >
  < / Credentials: n >
  < / n: SourceDBInfo >
  <!-ASMInfo element is required only if the active non-rac database uses ASM St
  Storm->
  < n: ASMInfo SID = '+ ASM1' >
  < n: Credentials >
  sys < n: User > < / n: User >
  ASM < n: Password > < / n: Password >
  SYSDBA < n: Role > < / n: Role >
  < / Credentials: n >
  < / n: ASMInfo >
  <!-specify the list of nodes that should have instances of cars running. LocalNode
  should be the first node in the nodelist. ->
  < n: NodeList >
  < name n: Node = "ebs64" / >
  < name n: Node = "ebs641" / >
  < / n: NodeList >
  <!-specifies the prefix for the rac instances. It may be same as instance name for no
  database n - cars or different. The instance number will be attached to this prefix
  . ->
  < n: InstancePrefix > RAC < / n: InstancePrefix >
  <!-specify the port for the listener is configured for the rac database. If ports ="",
  alistener existing on the local host will be used for the rac database. The listener will be
  be extended to all the nodes in the nodelist->
  < n: Listener port = "" / >
  <!-specify the type of storage to serve as rac database. The allowed values are
  CFS | ASM. The non-rac database must have the same type of storage. ->
  < n: SharedStorage type = "ASM" >
  <!-location of database field specify is configured for the rac database. If this fie
  LD is left blank, current storage will be used for the rac database. For CFS, this f
  ield will be the directory path. ->
  < n: TargetDatabaseArea > + DATA < / n: TargetDatabaseArea >
  <!-specify the Flash recovery area is set up for the rac database. If this field
  is left empty, current data base retrieval area no cars will be set to
  RAC database. If current database uses no recovery area, FCAC resulting
  database will not be a recovery zone. ->
  < n: TargetFlashRecoveryArea > + DATA < / n: TargetFlashRecoveryArea >
  < / n: SharedStorage >
  < / n: Convert >
  < / n: ConvertToRAC >
  < / n: RConfig >

  Hello

  Do you mean that it is no longer a problem?

  Kind regards
  Hussein