Video AVCHD, the chronology is yellow and will not make beyond a certain point?

Hello

I'm using Cs5, and images are Sony NXCAM, AVCHD, 1920x1080i.  In any case, all the images are the same, about 60 minutes.

I have a good video card, the 3800 so I am TSE able to use the Mercury engine. And I started this project twice now from scratch, with the same results each time.

Early on, the clips that I put on the timeline create bar 'yellow', even if the parameters I use correspond exactly to my images. (Strange)

Some of the transitions that I use transform the area yellow to red, and it does not play back well unless I make the entire work area. All is well until about 12 to 15 minutes, then when I ask the software to make the whole work area it is no longer made.  It starts just playiong the timeline as it has already done.  But the small red and yellow portions are still there.

So why she don't render surrounding a point very is neurodiversity!

I took about 40 minutes of film directly in again and managed to put the entire timeline, red and all parts the on a Blue Ray disc.

I then exported the timeline mixed color to media encoder, I wanted to create a small file for DVD SD and "encode" coded only the green area of the timeline, about 12 minutes.

Anyway, I can't the timeline to return after about 12 to 15 minutes of film.  The weather was slightly different on the two projects.

Any help would be appreciated!

When the timeline will make only a certain section, it is often that the WAB (work area bar) lower to the timeline become full. If this is the case, click on the \ (backslash key), then Dbl - Click the block in the middle of the WAB to restore the full timeline.

Good luck

Hunt

Tags: Premiere

Similar Questions

  • I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play.

    Windows XP DVD with Windows Media Player problem

    I have a Dell dimension3000 running Windows XP. I have an upgrade video card NVIDIA 8400 GS with memorey upgrade 2 g. I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play. Is there a better plug-in or a solution to this problem?

    Try to download the utility "Windows XP video decoder check utility.

    It checks the ability of DVD to WMP encoder

  • I'm trying to import my IE Favorites and have read the instructions on how to do it, but the import button in the file in gray and will not let me import. Any ideas?

    I'm trying to import my IE Favorites and have read the instructions, but the import button in the file in gray and will not let me import. Any ideas?

    Try using the import option in the Bookmark Manager (also known as the name of the library)

    1. In Firefox, select the bookmarks menu, then "organize bookmarks" open library
    2. In the library, select "Import and backup" then "Import HTML.
    3. You should get I hope that the ability to import from Internet Explorer.
  • I had to change my Apple ID because of accusations of fraud but my iPhone 6s 9.2 still has the old Apple ID and will not accept old or new passwords. How can I update the iPhone with the new Apple ID 9.2 6s?

    I had to change my Apple ID due to fraudulent charges but my iPhone 6s 9.2 still has the old Apple ID and will not accept old or new passwords. How can I update the iPhone 6s 9.2 with the new Apple ID and password? I tried to perform a complete reset, but which requires the Apple ID and password that doesn't work not... pretty frustrated here.

    YYou have unlink the old iphone you as find my iphone the reset all devices on this subject from your account then plug it to your iTunes then restore a new one after that reset password that under the new phone then connect

  • When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8.

    Acer E5-471

    When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8. Only a black screen and mouse pointer appear. How can I solve this problem?

    Hello

    1 power off the device
    2. power on and immediately keep taping Alt + F10, unit will start to recovery, choose Exit & continue to windows. Post back if I helped

  • last name in my contact list is not displayed. It's as if the list is long and will not display the last of them.

    Last name in my contact list is not displayed. It's as if the list is long and will not display the last of them. Is there anyway to fix this?

    Hello

    1. are you referring to e-mail contacts or Windows contacts?
    2. who is your provider of mail service?
    3. using any e-mail client?
    4. don't you make changes to the computer before the show?

    Suggestions for a question on the help forums
    http://support.Microsoft.com/kb/555375

    The information is not sufficient to answer your question. Please provide us with more information to answer your question better.

  • The cursor flashes constantly and will not stop.

    Separated from this thread.

    It does not work. I'm not using Chrome. I use Firefox. The cursor flashes constantly and will not stop. Now, as I type, everything works fine. But in the contrary case, the cursor flicker with the small guard wheel busy with her.

    I had this problem as well - but it has happened when I loaded to the top of Chrome; I tried a lot of different things, but could not solve the problem.

    Then, I saw the post from TonyBrownCloudCo, and I knew he was on the right track here.
    Go to the Google Chrome settings > advanced settings
    Disable Google Cloud Printing - it is a used questionable spooler built-in Chrome browser, it must come from the recent update, because I've never had a problem with it before.
    I hope this works for everyone.
    "If you have explored all the possibilities and tried every permutation, everything that you have, no matter how irrational it seems, it is the truth." Quinn, 2012

    Hello Willie,

    Thanks for posting your query on the Microsoft Community.

    I imagine the inconvenience you encounter and I will definitely help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

    1 are you having this problem with Internet Explorer as well?

    2. you remember changes to the system before this problem?

    In the meantime, I suggest you return the form as follows article below and check if this can help:

    How to stop a blinking cursor?

    https://support.Mozilla.org/en-us/questions/943469

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Thank you

  • I am trying system restore and it says I have no restore points and will not let me create restore points

    help I am trying system restore and it says I have no restore points and will not let me create restore points
    * original title - find search indexing index reindex re-indexing research research research service troubleshooting troubleshooting *.

    Hello

    1. what exactly happens when you try to create a system restore point?

    2. you receive an error message when you create system restore point?

    3. what operating system is installed on the computer?

    In the event that you use the Windows 7 operating system you can follow the steps below and check if the problem persists.

    Method 1:

    Step 1:

    Locate the service associated with the restoration of the system or Volume Shadow Copy Service is started after the computer is restarted. This service can be stopped by some viruses as well, so you can try to run a scan of your computer.

    To check the service

    (a) click Start

    (b) in the start search box type Services

    (c) click on - RUN as ADMINISTRATOR

    Check if the below mentioned services has mentioned State and type start.

    Shadow copy volume started Automatic\Manual

    Step 2:

    Also check the dependency services that are required for the System Restore Service run.

    To verify that double-click the service, and click the Dependencies tab.

    This service must be started before the restore point is created automatically or manually.

     

    Method 2:

    Try disabling the firewall and windows temporarily on the computer security software and then try to create a system restore point and check if that helps.

    Follow the articles given below to change the settings for the firewall and security software settings

    Understanding Windows Firewall settings

    http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

    Firewall: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note:

    If you are able to perform the system restore after you disable the security software then you may have to contact the software publisher for the security software by disabling the firewall and security software is a potential threat to the security of the system.

     

  • whenever I connect to the web, windows setup will light up. He continues to ask the companies to office and will not stop. He interrupts everyone and everything that I do everything online

    I can't windows to stop coming on and asks me to install the desktop business drive. It starts as soon as I connect and will not stop, interupting everything what I do online

    Hi marcus,

    1. What is the full error message that you receive?

    2. have you recently trying to install a program on the computer?

    Method 1

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you perform a clean boot and check.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    Method 2

    If the previous step fails, then repair Microsoft office on the computer and check if it works.

     

    How to understand the repair feature in Office 2003 and Office XP

    http://support.Microsoft.com/kb/822238

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Try to download Bing Bar 7.0. Received the error code 61BO and will not download. What should I do

    Windows Update has tried to install the update of Bing Bar 7.0 since 16/01/2012.  Have tried many times update me.  Display shows error code 61BO.

    and will not be installed.  I installed Miscroft difficulty and tried again, but still get same error message.  What should I do?

    Hey chick from Mississippi,

    If you are unable to install Bing Bar 7.0 and receiver error code 61BO, create a new thread in the Community of Bing. Experts are better able to help you.

  • How can I transfer windows license to another PC if the first broke down and will not start?

    My office with detail Win7HP broke down and will not start. I intend to buy another PC and want to use the Win7HP license on it.

    If this computer came preinstalled with Windows 8.1 or Windows 10, you may not be able to install Windows 7.

    If she can't, then you should be installing that it as you did on the first computer.

  • Video HD imported on MAC CF and will not play on the side PC or import of AE

    I have problems to import video files captured with final cut Pro HD. When I'm on the side of the PC and use after effects CS 5.1. And when I try to import the files into the project area I get this error. After that error effects five impossible to import the movie file is damaged or not supported.

    However when I played these video files on Mac with QuickTime it works perfectly. But also when I play these QuickTime movies on the side of the PC I am getting just a black screen. Also when I play these video files with VLC player, it works perfectly on the side PC.

    Is there someone who could help me solve this problem. I searched the Internet for answers and there is no solution to this yet. Thanks for any help.

    TimeRemapper said. Many of the CoDecs of the FCP do not exist in native mode for PC and these files cannot be used on PC at all or only with restrictions. You will need to know exactly which CoDec and then go hunting for a conversion on PC side tool or a converted clip of someone with a Mac and FCP...

    Mylenium

  • TB stops the downloading of emails and will not again until the computer is restarted

    This started happening about a month or two it is a. TB will be fine and download my email. Then he no longer do. It will act like it is tempting, but nothing happens. If I close and reopen, it will not download. When this happens, the only way he'll do it again if I restart my computer. Sometimes daily, sometimes what happens every 2-3 days.

    It has nothing to do with my mail server, that I am downloading. My HDD is running less on space (a still near 60 GB free), but I don't see how that's the problem because it works great even on reboot. It happened after compaction, but not all the time. I regularly delete files from the Recycle Bin.

    Everyone knows this, or have thoughts about what can be the cause of this? He could have something in one of the improvements?

    It has no impact emails, just empty the cache part then you feel safer. I guess the chat conversation may be deleted. I do not use cat myself.

  • R15 reformatted with XP, now the drivers are missing and will not connect Internet

    Hello!

    I got a Satellite R15 without recovery disks. I was thinking that I would do a set but never had him. Recently, I started having problems with my MSOffice 2007 software. I tried uninstalling and reinstalling, but files were corrupted and it did not work. My next step was to buy Windows XP tablet edition operating system. I reformatted and installed the software. However, I had to reinstall 3 times before I was able to get actually reformat my hard drive. The new system is missing the Center help for a reason any and was also the drivers missing. I went to the Toshiba Download Center and I have downloaded every driver/program as possible I might need for an XP operating system and install them all. Some of them would not work because they wanted to connect to the internet. Some of them did not work because miss me a "PRC driver." I also installed service pack 2 for Windows XP, but not service pack 3 because I do not have an internet connection. Initially, the modem, ethernet, sound, video and a few things were not pilots. Now I have drivers for all except one - seems to be to shock absorption software and I can not find anywhere. I need help.

    1. I can not always connect to the internet via ethernet or wireless
    2. I would like to have a center to help once again - I use it once a year or more, but it's good to know that it is there
    3. I'm still not able to install MS Office 2007
    4. I would like to get this software for shock absorption.

    Any advice would be much appreciated!

    The HARD drive works? I ran the test Advanced in Hitachi DFT to ensure is has no bad sectors.

    Install the driver 'Toshiba HDD Protection System' on the Toshiba site. Needs to be installed first, its very important common Modules.

    The Office CD is scratched? It works in the other PC?

    Ultimately, you want a Toshiba Recovery Disc, this way you can be sure that all drivers are installed correctly. I believe you can get replacement of Toshiba drives.

  • Language bar disappeared (the taskbar toolbars too) and will not be restored

    I installed the Greek keyboard with success.
    (Sometimes, during loading, - when the desktop-, I can see a bar with top English of the screen, but despite this I can't go between with alt + shift...)

    Hi Ioannis konstantinou,.

    Welcome to Microsoft Vista Forum community!

    You can try the following steps to resolve the problem:

    1. click on Start, type regional and Language Options in start search and press ENTER.

    2. click on languages and keyboards; Click Change keyboards, a new window will open.

    3. in the Text Services and input window a language, click Language bar, here if the language bar, the button is hidden, change it docking in the taskbar, click OK in the remaining windows.

    Note: You can click on the key parameters Advance that will allow you to use a keyboard shortcut to switch your languages.

    Another user had a similar problem, please visit the following link and try the suggestions to see if it will solve your problem:

    http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/c77fc94d-dfa4-4fe5-9d79-15e3cdaee35f

    Hope this information is useful.
    Let me know if it worked.

    Concerning
    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for