Video Clips video clips

Similar Questions

• removal of clips video iOS iMovie

  I import video into iMovie on my iPad air 2 on USB. I edit the project, and then export it back.

  I delete the project, to make room for the next project, but none of the clips are removed.

  I must therefore delete iMovie on the iPad and then back - probably, I'm missing something - this may not be the only way to remove the clips?

  If you are using the latest version of iMovie (2.2.3) here is the instructions given in the supporting documents:

  -------------------------------------------------------------------------------- --------------

  Managing the media copied from another device

  You can change the media used in the projects that have been shared between the devices in the media section of the iMovie library. There you can download the media in your photo library, or remove the media the current device.

  Note: Media projects created in previous versions of iMovie can also be managed in this way.

  1. Tap plans to open the project Viewer, select the project with the media that you want to manage and tap on change.
  2. Press the button add media , then click on videos.
  3. Select iMovie Media.Any appear video clips that are already saved in your photo library.
  4. Tap Edit.Buttons appear on the right side of each clip.
  5. Press the gray download button to save the clip to your photo library.
  6. Press the Red Delete button remove the clip of your local device. Note: If the clip is being used in a project, you must remove it from the timeline before deleting. For more information, see remove a video clip or a picture of a project.

  -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ----------

  I think that the process is very similar to previous versions of iMovie, but names/icons may be different.  Hope that helps

• Clips of the video choppy after export to the formats .m4v.

  I created a photo slideshow with some video clips.  The clips will play in Quicktime, Photo Slideshow, etc.  But when the slideshow is exported in a .m4v format film, the clips are jerky.  Even the DVD created with the .m4v movie plays jerky clips.  Is this a problem with the picture or the format that I export?  Or maybe even my DVD Creator which is Wondershare?

  It probably comes to DVD conversion, but you do not say much on what parts of the film are jerky.

• iMovie crashes while editing video clip

  Hello

  Whenever I try to edit a video clip in the library on imovie, just put my cursor over them to view the clip causes my imovie crashing. It's a lenghy-er clip, long of only 6 min. except that everything works fine. I have imovie and the latest OS. Any suggestion would be great, thanks.

  iMovie crashes while I have it change. Any ideas on how to solve this problem?

  "If the accident happens when you change a particular clip then remove and re-import the clip. If it happens on several clips then I copy all the items in the timeline panel, create a new project and paste there the clips. If it persists in the new project try to open iMovie, hold down the command and option and delete the preferences. "(Jim Wanamaker - June 8, 2016)

• video clips will not load or play

  Video clips do not load or play

  Your list of details of the system that does not have the Shockwave Flash plugin is installed and activated.

  • Firefox/tools > Modules > Plugins

  You can find links to the latest version of Shockwave Flash player for Firefox on this page:

  • http://www.Adobe.com/special/products/flashplayer/fp_distribution3.html

  You can check on the Page of Test Adobe Flash players that the Flash plugin works and what version you have.

  • http://www.Adobe.com/software/Flash/about/

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• A project that I created is no longer works.  All video clips .mpg who ask to be reimported, and when I try to import from its original folder, all the files are slim.

  I currently have iMovie 10.1.2 and OS 10.11.6.  All except a video clip in a compilation of long hours are black with an exclamation mark.  They have the error statement, that the file is missing, re-import the original source media.  The clips are all .mpg and had imported fine when I created the film project of the month of May.  When I try to use the function "Import Media" drop, and I go in the folder on the desktop files located in, all the original .mpg files are low.  The two pictures that were in the project appear on the lower part.  Oh, and I did all that stored on the cloud.  I also wanted to start a new project, part II, but all the source files show a similar dim for all .mpg files.  Apple decided not to allow the .mpg files in iMovie?  If so, what is my next step?

  iMovie accepts more mpg files. The easiest way to work with them is in the finder do a right-click on the mpg file and select "encode the selected video files. In the dialog box that appears, choose the desired conversion. The converted file appears in the import iMovie window, and you can import it.

• Best way to add two mic clips to a video clip

  I have two microphones tie run in two different channels (not the camera).  I want to add these two audio clips to video.  I took the two clips and clip video and synchronized together... that works although I... now no control over each audio clip is what it is.  Is there a better way to do it, or where I can have control over each audio clip in the timeline?

  Have you used the function of the extent of the audio components in the timeline?

• Helps editing of video clips in imovie

  Have an imported video but trying to edit and cut the clips that I am only able to select the full video to put down in my film, not just the clip I want to choose.  Helps editing of video clips in imovie

  < re-titled by host >

  have an imported video but trying to edit and cut the clips that I am only able to select the full video to put down in my film, not just the clip I want to choose.

  This is a new and improved feature in iMovie. You must hold down the 'R' key while clicking on the part of the item you want.  By default, the full clip will be added to the time line.

  See notes to iMovie version 10.1.2:

  

• Combine all the video clips in a new clip

  Not exactly necessary for my workflow, but something I'd expect to see. In a main element with many intermittent faults, which I clean, either in the viewer or the timeline, my clips unique original becomes a series of video clips. With this master clip now cleaned, I couldn't want to change in a way that maps the changes done to eliminate imperfections. Kinda like having a $5, $4 1 s and the spare change to raise to $10 and preferring to have a single $10 bill, instead, another handful.

  The manual says no way to do it within the FCE. If I export the standalone series of clips as .mov, QT hit the resolution from 1080 to 720 (no thanks). If I export to QT conversion, the 1080 can be maintained, but the only file that results has its image reduced by 20% (?), surrounding it with black borders. When brought within the CTF, the clip is still listed as 1080. But I still have to resize it with success, as the means for it apparently do not allow borders to trim.

  TIA

  Try this:

  Re: Export in best quality

  Also, check the project properties are what you think they should be.

  Al

• With the help of blade to separate a clip causes a dumpster in video

  I'm editing a travel video and I have a few questions for the use of FCPx:

  (1) I have a clip which has varied exhibition throughout the clip segment. To resolve this problem, I used the blade to cut the clip into two parts where the exhibitions are different, so I've adjusted the colors so that they match. However, the blade causes the video to ignore in the part where it is cut. I tried cutting it in different places, but same result. I also used a compound clip that preserves settings but the body is still there. I also tried combining the two clips that eliminates the skip, but it eliminates also the two different settings.

  How can I fix the variable exposure without having to use the blade? Is there something that will balance the exposure and contrast across the video automatically?

  (2) Let's say I use several changes for the same clip such as filmconvert and just the adjustment of the base color, how fcpx treat several parameters that can correct the same thing (i.e. color)? Not detract from the quality if there is more than one? Sometimes I add some desaturation on the adjustment of the base color, then again on filmconvert.

  Help is very appreciated! I am new to the color adjustment, and it drives me crazy. In my view, that it took me about 30 hours over 3 days to get to where I am

  (1) put a cross dissolve between the two clips with various corrections. A slow dissolve usually works well.

  Don't know what 2 means, but if I understand well probably not. The application starts from the original/optimized support and built each effect top-down one after the other calculation on the available high quality media. There is no more intermediate copies to generate the final output file.

  Looks like you do too complicated. Several adjustments with similar effect can give you a slightly different effect, but you should be aware that most viewers will never see the subtleties in your correction. The subtleties in the shadow detail in dark scenes of the Game of Thrones will be lost in 99.99% of viewers whose sets see only in black.

• How iMovie organizing imported video clips

  I just imported quite a few video clips (c. 400) to a folder in my office in iMovie.  Most of the clips are pretty short - maybe less than a minute.

  I went in the screen of media project and began to watch the clips.  I noticed that it doesn't seem to be any rhyme or reason to the way they are arranged.

  Can someone tell me if iMovie organize or sort the clips imported somehow?  Thank you.

  You can sort the imported clips you want in iMovie 10.1.2. Use the "View menu > sort clips by. command.

  

• I have a video clip taken with a Go Pro.  The clip is upside.  Is it possible in Photos to reverse that?

  I have a video clip taken with a Go Pro.  The camera was upside down when the clip was taken.  I imported it in Photos, and now he is always upside down.  Is it possible to return the clip?

  Not with pictures - you can I think iMovie or QuickTime - export video back in the ouside software and then re-import

  LN

• Audio separate from a video clip to use separately

  (Via a small list of things I like to do in iMovie HD...) The best I get is that it is not possible within the FCE, you have to do it somewhere else (for example, MPEG Streamclip).

  Y/N?

  TIA

  1. Select (highlight) the clip on the Timeline.

  2. press on control L (lowercase L) to unlock the audio from the video.

  3 remove the video if it is not needed and use the audio where you want.

  -or-

  Open the clip in QuickTime Player Pro and export an AIF (audio only).

  -DH

• How to open the H.265 duplicator of Blackmagic design video clips

  How to open the H.265 duplicator of Blackmagic design video clips.

  You could try VLC.

  If you mean for editing then unfortunately Apple is very, very backward these days in terms of codec support. You will probably need to look at Adobe first place.

  Its a bit of chicken and eggs at the moment, we do not know if the reason for Final Cut Pro X is neglected is because the Mac Pro has not been upgraded, or have Apple decided to abandon the Mac Pro, because they are more interested in market Pro at all.

• Why some of my clips making go white screen in component video

  Why do some of my clips making go white screen in the video component?

  How should one know without details...?

• Clicking on a video clip selects the entire clip, rather than the range.  I did the update and it still happens.  Help!

  Problem * by clicking on a video clip selects the entire clip, instead of cuisiniere.* *.

  I restarted my computer like new.  Lost the iMovie app.  Re downloaded in the App Store.  Now I have a crappy iMovie on the App Store application.  Then I made, I got the updated version and I did.  Always update does not resolve the problem.  I'm sucking in a hole because I need to make new videos for work and I can't.  In addition, I'm too broke to buy Final Cut.  In addition, all apple stores have a waiting list of 5 days before they see you!  Thank you Apple with a 6 bites taken out of it!

  I had a similar problem and it was driving me crazy. I think you press and hold the 'R' key now to select a range, otherwise, it will select the whole clip. I think it's a goal a feature and not a bug? Hope that helps!