Video display stops - first CC 2015

Similar Questions

• Display the first CC 2015 work area bar

  I just downloaded Adobe first CC 2015 and I can't find the setting to "Show work area Bar. What's in this version?

  Hi Bryan,.

  See the menu in the timeline panel.

  Thank you
  Kevin

• Correspondence of time remapping with ramps for video editing of first CC 2015/output

  I would like to ask experts, which will be the best workflow...

  Location:

  I have the project with 50 + video segments where I have to slow down part of the clip to highlight some details (in my case - CIRC. enduro motorcycle - need to slow down the part where is visible some technical riding etc.).

  I use bulit Premiere Pro CC 2015 in the tools of the keyframe to select two points between where I change the speed for example at 50%. First has nice handles around the keyframes where I can create smooth ramp, so the change in speed is graduated.

  Insofar as simple here s

  But the first will not do the same with audio track associated with each clip. In the audio is for his example of the motorcycle.

  I need to have his original when the video is playing at 100% speed and its different from "lower pitch" when is slowed down and once again normal sound when is 100% video speed on the end.

  So I edited each audio segment to the points of the time remap keyframes, manually set the speed of the middle section and - it s horrible. Video slows gently while it is quite annoying audio changes.

  I need to make the same effect as what we were doing with Ribbon old VCRs in television production - smooth audio ramp corresponding to the video and return to full speed.

  As my knowledge about hearing is close to zero - I would like to ask at the front to start learning - I can do up in the hearing? What I have to do it every time from scratch or can I use existing keys from first images? Anyway how above 'automatic '? What workflow you have advice when I need to do it quite often many of these clips?

  Thank you much for the help.

  P. S. tried to find out, after a while with the help chat online too...

  Most of the discussions and tutorials is very old - there may be some new features in CC 2015 in order to do compare with 2011 toolset or almost. And in many video tutorials only covered - they talk about audio at all. But for audio track that I use, is the audio very good.

  Here is an example of a part of the timeline. I needed this project to do quickly, I decided to stretch the entire audio segments to match the new length of the video. It s not correct but it sounds better then it divides in three parts with a slow speed in the middle. Just to match audio speed changes in the Panel of video editing

  

  Not sure about the exchange of workflow with first for this type of effect.

  However the hearing can make the effect of change of speed/not very well using effects/time and Pitch/Pitch Bender. This uses a waveform envelope on with keyframes to vary the height must therefore ideal for your needs. In order to see where on the waveform, you need to place keyframes without doubt the best way is to place markers on audio in first at beginning and end of each ramp. These should be done through when you export audio in Audition where you should be able to match Pitch Bend keyframes to markers.

• Mac user: First Pro CC 2015 "can't find compatible video display modules" at startup?

  Premiere Pro CC 2015 "can't find compatible video display modules" at startup? I'm on a 27 "iMac, end of 2013, OS X 10.11.3, NVIDIA GeForce GTX 780 M 4096 MB. More info in the forum seems to deal with Windows solutions to this problem. Can someone help a Mac user? Thank you!

  Hi Douglask,

  Premiere Pro CC 2015 "can't find compatible video display modules" at startup? I'm on a 27 "iMac, end of 2013, OS X 10.11.3, NVIDIA GeForce GTX 780 M 4096 MB. More info in the forum seems to deal with Windows solutions to this problem. Can someone help a Mac user? Thank you!

  Please check, if you provision for video drivers:

  CUDA for MAC drivers Archive | NVIDIA

  Try this:

  Go to the following locations:

  1 location: In the Finder, click go > go to folder > ~/Library/Application Support/Adobe

  Situation 2: Go > go to folder > ~/Library/Preferences/Adobe

  Location 3: Documents > Adobe

  Everywhere, rename the folders 'Adobe' to 'OldAdobe '.

  Launch the first, accept the license agreement and see if it works.

  Note: You will lose your customized workspaces and keyboard shortcuts.

  Thank you

  Ilyes Singh

• Full screen toggle in first Pro 2015 stop built 174?

  I've just updated Premiere Pro earlier today and now when I use the "tilde" (~) key with the selected program monitor to read my video full-screen, only a part of my video is displayed in the top left area of the window/quadrant.  The rest of the window/quadrants appear black.  Full screen toggle in first Pro 2015 stop built 174?  My version is 9.1.0 (174).  Under help-> about, he says 2015.1 release.

  Thank you.

  UPDATE: I just tried CTRL + ~ and toggle full screen works very well.  So it seems that in previous versions, I was able to press just the tilde ~ (without pressing CTRL) and then she could go full screen while now I have to press CTRL.  Is this correct?

• First CC 2015! Help cut video

  First CC 2015! When the video cuts by dragging the edge of the video in the "Monitor the program" window displays two images at the time of the Cup and for some, what to choose to save an image that displays the last image at the time of the Cup as the "first CC 2014"thanks!

  

  Not quite sure what you are asking but uncheck...

  

• in what format can I I save the video in the first cc pro trial version adobe 2015?

  in what format can I I save the video in the first cc pro trial version adobe 2015?

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  Save and SaveAs functions are only for project files

  You EXPORT in order to create new video files

  A little dated now, but still lots of good information

  CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 has many links tutorial to help learn

• First cc 2015 reading stops after a couple of seconds.

  System: El Capitan 10.11.2

  Round 12 core

  Mac Pro (mid-2010)

  6 core Intel Xeon 2 x 2.66 GHz

  24 GB 1333 MHz DDR3 ECC

  ATI Radeon HD 5770 1024 MB

  Barracuda SATA drive 7200 RPM

  Software:

  Adobe first CC 2015 v.9.1.0 (174) build

  Adobe first stops playback after all few seconds regardless of the codec - Mv4, ProRes, H264...

  Have not yet implemented the effects or changes again. Even after complete Assembly made it cannot stop playing the whole clips.

  Past back to the software mercury vs. Open GL and the preview files deleted without result.

  Help.

  Viet

  Viet salvation,

  I think it's more a problem with the Audio hardware.

  Follow the steps below to set up a comprehensive mechanism:

  1 start the Audio configuration and noon, which is located here: Macintosh HD > Applications > utilities.

  2. click window in the menu bar and choose show the Audio pane.

  3. in the Audio configuration Audio and MIDI devices window, click the Add button.

  Create Aggregate Device and change the audio again overall device in Premiere Pro Audio hardware preferences.

  Try to do the reading after that and check if it works.

  Kind regards

  Navdeep Pandey

• 20 Nov-"first cc 2015.00 has stopped working"

  HOW DO I UPDATE FIRST CC 2015? MANUALLY OR AUTOMATICALLY?
  Running Windows 10, updated Intel drivers. I just 'installed' first CC 2015 via the Cloud for Windows.
  When I try to open the program I get her "... has stopped working" message pop up.
  I'm unable to locate "updater". Update files were located to ProDesignTools Web 'fail to extract' - and seems very suspicious to me.
  I disconnected and logged in Creative Suite. Now, I spent 3 days trying to install and use the product without any results.

  I would have taken the new clean install would have been the last and largest.

  Hi David,

  Follow the steps below:

  ' 1. go to Menu start and open the Device Manager.

  2. click on the drop down for "graphics cards".

  3. right click on the AMD graphics driver and select "disable."

  4. try launches the first after you turn off the AMD driver.

  Kind regards

  Navdeep Pandey

• When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!

  When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!

  Please make sure that the audio and video tracks are highlighted.

• First cc 2014 crash with the message "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

  I've updated for Premiere Pro CC 2014, all other Adobe CC 2014 software works very well, but the first does not load again. The start page (frame) happens - my computer everything slows down and after a minute or two, it freezes completely and comes up with the message: "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

  I use a macbook Pro 15 '' (2014) with 16 GB of RAM and 760 GB SSDS. "

  Help, please!

  Hi Brigitte,.

  Go to the following location and rename the folder in the name of old_folder

  User/user/library/Application Support and rename the Adobe folder

  User/Library/Preferences and rename the Adobe folder

  Then, go to the folder Documents and go to Adobe/Premiere pro/8.0 and rename the 8.0 folder

  Make sure that you are in the library of the user if you are not sure to check out the link below.

  Access the hidden user library files. Mac OS 10.7 and later versions

  Kind regards

  Vinay

• Video of C100 AVCHD Canon 60i stands as 29.97i when they are imported into first CC 2015

  When I import an AVCHD file shot at 60i with Canon C100 MK1, it will come in first CC 2015 as 29.97i . (exactly like the images shot using the parameter PF30p of Canon).  Everyone knows this?  Maybe this related to the strangeness of the Canon PF30p we all know files must be "modified" inside the first change in progressive?  Is there a similar work-around for 60i?

  60i is the wrong way to say 30i.  They mean the same thing, well that - 30 interlaced images per second.

• Adobe first CC 2015 reset the Audio hardware settings

  Hello

  I have a curious scenario; I think that it is related to all these discussions about audio problems in first CC 2015. I have a client running a new Mac Pro with CC 2015. It worked fine for several months until last week. First began to change the audio settings in Control Panel preferably on its own. The symptoms are that audio stops completely and video playback stops working as well. You see just a still image from the video. This happens on after 10-15 minutes of editing. We have been able to temporarily fix things in going in the Audio hardware preferences and changing output and input built-in by default. Which only solves the problem for 10-15 minutes well. After that, we need to restart the machine in order to restore playback. This happens with any project.

  My client is running first for 2015 CC version 9.0.0. (247) here's a screenshot of its audio hardware settings and OSX sound control panel.

  

  I think that things should be set to audio built-in by default. But what happens is first keeps changing the default entry, the default output and Master Clock to tell the Audio display fields. Sometimes it shows as DisplayPort as well. Notice that this is different from the output that we defined in the acoustic Panel. We have removed our media Cache files and this always seems to happen.

  Any advice on what is happening?

  Hi André,.

  The 9.0.2 patch for Premiere Pro CC 2015 comes out that has a fix for the Multicam. Please update and verify.

  Premiere Pro CC 2015 update (9.0.2) | First work Pro area

  Vinay

• iOS 10 video playback stops working until you restart

  I have an iPad Mini retina, and since the upgrade to iOS 10.0.01, a short period of use causes videos to stop working.

  Videos in Safari, Chrome, YouTube etc. appear in the cache (saturated with progress on the top bar), but no response to play. The first image of a video appears, but only in the form of static image. I am able to change the static image displayed by rubbing them at any point in the video, but playback will not occur.

  The only thing that allows video playback is again restart the device (apps force closing, locking and unlocking etc. doesn't help).

  Hello, Sunkai!

  Thank you for using communities Support from Apple. I understand from your post that you're having trouble playing videos on your iPad mini; the video will start but will be stuck as a single image, as if the buffering and never take back (at least until you restart). I mainly use my iPad for watching videos, so I know it's important that they play in fact; I'm happy to help you!

  I have some troubleshooting I can offer to you. Before you begin, create a backup of your iPad using iCloud or iTunes, following the instructions here: How to back up your iPad, iPhone or iPod touch

  Once you have your backup, try the following steps, in order. A video test after each step and will stop when the problem is resolved.

  1. Make sure your iOS software is up-to-date. In the last week, iOS 10.0.2 came out. Use the following article to get help update: update the iOS on iPhone, iPad, or iPod touch software
  2. If this happens on a Wi - Fi connection, try restarting the network you are using from the router or the modem (if possible). If it is a private (for example, your home network) WiFi network, try to remove all the devices on the network, then by simply adding your iPad in return.
  3. Try a different network.
  4. Reset the network settings on your iPad under settings > general > reset > reset network settings. This will affect all personal data (like your photos, contacts, calendar of events, etc.) but it will remove saved passwords, and Wi - Fi networks one previously used settings APN or VPN and all paired Bluetooth device.
  5. Restore your iPad settings, following the steps described here: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure the iPad as a new device (i.e. without using the backup that you created earlier, at least temporarily). You can sign in iCloud, iTunes and App Store, iMessage and FaceTime with your Apple ID test then a video.

     If the problem is resolved, you can restore your backup by the information here: restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• problem with first cc 2015 & sequels 2015

  Hello

  I have a probem with first cc 2015 and 2015 sequelae (mode of trial for now)

  I start the first, new sequences, matter a video, add a title, the transition between the title and the dip-> video black

  OK, this is just an example, tool selection, select all in the time line, replace with after effects composition

  the titile disappeared, the transition went, I only have the video in effect after 2015 why?

  
  

  
  

  and another question please?

  I have this problem

  (1) I have create a new sequence

  (2) I import video

  Now if I drag and drop the video in the timeline panel, I received a warning because the offset of the clamp with the sequence, it's ok

  

  But if I click in my project of the video source-> starting point and and point final-> insert or replace I have no warning

  Thank you

  (1) transitions and titles are not part of the "Dynamic Link" between Premiere and After Effects-, they will therefore be included in the After Effects project when you click on ' replace it with after Composition Effects. You will have to re-create them in After Effects.

  (2) you get only Clip Mismatch warning when you insert a clip into an empty timeline. If you already have one or the clips in the timeline, then the warning appears.