video in fullscreen makes computer freeze from time to time
Recently, my computer started to glitch during playback of videos and sometimes even in music. When the video is full-screen every minute half-minute or so it will freeze for a few seconds, causing the audio quickly repeating sound like a 'd.d.d.d.d.d.d' that lasts a few seconds and then play the movie as usual. When I reduce the video so it does not have the full screen it time very well provided that this is under a certain size. When this product problem however it freezes the computer as even the mouse still motionless and then jump to a new location once the computer resumes. I don't think that this is a problem with the CPU or everything that I tried to run several large programs and max on the CPU and it won't. Sometimes, it will however while that a video youtube as well. I checked my card graph and other drivers and they are all up to date, the only thing I found which could be the cause is Health Center says Windows "Intel Graphics Driver has stopped working" I tried using the problem solver is but there is not a solution for this and I reinstalled the drivers anyway and he's always done. I don't know if this is the problem or not, however, like the date, he says that this problem has occurred does not correspond with me trying it to watch videos. I would also like to add that this problem happens more frequently when I watch the movie then using VLC with windows media player. A movie on VLC, I played was actually almost constantly, while Windows Media Player played the film very well. Although, as I said, Windows Media Player still does from time to time as well and I tried reinstalling VLC and loaded a completely new player to see if it was her and she is always natural. I have not downloaded programs that I could create a conflict either. In any case, I'm at a loss and if this problem is not indeed my computer use normal it doesn't stop me from watching movies I really love so any help would be greatly appreciated thanks.
Hello
1. may I know the version of the Windows operating system you have? It's windows XP, Vista, Windows 7?
2. you receive an error message?
3. What is the RAM in your computer?
4 is limited to a particular video format?
I suggest the following methods and check if it helps.
Method 1: I suggest you to put the computer in a clean boot state.
To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below for more details:
How to troubleshoot a problem by performing a clean boot in Windows 7:
http://support.Microsoft.com/kb/929135
Note: When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.
Method 2: the System File Checker (SFC) utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.
To run a scan suite SFC as follows:
How to use the System File Checker (SFC) to search for missing or damaged system files in Windows 7
http://support.Microsoft.com/kb/929833
Method 3: contact your factory of the computer to update the graphics drivers.
For your reference:
Slow PC? Optimize your computer for peak performance
http://www.Microsoft.com/athome/Setup/optimize.aspx
Tags: Windows
Similar Questions
-
iPhone 5 screen freezes from time to time after updating to ios 10.
iPhone 5 screen freezes from time to time after updating to ios 10. Then, should I block the screen again and unlock it to make the iphone work again.
Hey Nilay182,
Thank you for using communities Support from Apple. I can see from your post that you are having problems with your iPhone freeze or does not. Having a reliable phone is important and I would help him get yours working normally again. I have provided a link that explains how to troubleshoot a few things with your phone when it does not.
If the screen of your iPhone, iPad or iPod touch does not respond to touch
If you still have problems with your screen after you follow these steps, let know us and we can continue to troubleshoot from there.
Kind regards.
-
Satellite L855-123 freezes from time to time
Hello
My laptop freezes from time to time, especially just after that is (re) starts. Most of the time the audio or the video freezes for a few seconds (any program I use), it affects everything else too (for example, when music freezes, google chrome will act weird as well), but I am able to move as much as I please.
In Event Viewer, there is a lot of "iastor, id: 9" since the 20th of this month (the day all gel started to happen). But as of yesterday, it seems to be have been replaced by "atapi, id: 11» I don't have any new software before all this happened?
I looked around and tried a couple things that have helped others: off Link State Power Management; made sure all drivers have been updated; Uninstall Intel Rapid Storage Technology. Nothing seems to work here however.
If all goes well, there is something else I could try before I have to go through the hassle of reinstalling windows 7 or get new hardware.
Thank you.
I guess you do not reproduce this problem of gel.
It very difficult to talk about issues that cannot be reproduced or occur occasionally.But you mentioned the 'file iastor in your ad.
Iastor belongs to the Intel AHCI / RAID or SATA driver package.So I think that the problem is related to the HARD drive or the HARD disk controller.
I recommend you update Intel® Matrix Storage Manager and Intel Rapid Storage Technology driver to the latest version (check page Intel).If this is insufficient, recover laptop using Toshiba recovery disc.
In case this is not enough, you should check if the internal HARD drive might be the occasional reason for this system of freezing. -
My windows 8.1 is running very slow and freezes from time to time.
My windows 8.1 is running very slow and freezes from time to time. So I ran sfc/scannow. It finds corrupted files, but could not correct. So I ran "dism / online/cleanup-image /restorehealth ' but there as well. Please help as soon as possible. Thank you!!!
Original title: find files corrupt after sfc/scannow and could not repair
Hello Akash,
Thanks for the reply.
As you said, after completing the scan found SFC, you get an error message indicating that there is corruption but was not repaired. Then, please follow the following suggestions to solve the problem.
Use the System File Checker tool to repair missing or corrupted system files
(Refer to: manually replace the corrupted file with a good copy of the file)
http://support.Microsoft.com/kb/929833/en-us
I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.
-
I like to play a lot of music on my laptop, but lately this strange keeps randomly which occur. It almosts seems the track froze upwards, but this isn't because he continues to play (like a disk scratched in a cd drive freeze?).
It's just from time to time, but it is very visible, especially when we played through my good external speakes. It occurs through the built-in speakers, standard headphones and external speakers.
I was wondering if one has ideas of what is and how can I solve this problem, because it's really annoying me.
Thank youYour ad is quite general and there is not a single relevant info that can help us understand the problem described.
Music can be sound you hear while you watch movies, audio CDs, MP3s, internet radio, and so on.This happens in the case or how to understand this?
-
Satellite A300-1MT freezes from time to time
Hello.
My lay is old and only 3 days and the only problem is that it freezes every time.
I use it on AC/high performance. I just work on it, and when I run the installation of a game it freezes usually, when sometimes I'm working on it, just browse the internet or write in word, it just freezes, did some stupid lines on the screen and that's it.
I have to stop it by pressing the button for 6 seconds.I watched the temperatures. CPU is the GU of 60-65, 50-55 and HDD on 40-45 degrees. and when it's freezing, HDD Led goes off, all the others are bright white.
Can someone tell me what to do? What is the problem?
Should I take it back and get a new one?TNX
Hello!
It is not easy to say what is the reason for this problem, but I think this could be a problem of the RAM or the motherboard.
In your case, I would check the RAM with Memtest86:
[www.memtest86.com]Did you install the laptop with the Toshiba recovery disc or disc of Microsoft?
Maybe reinstall Windows might also solve the problem. Try it.Good bye
-
My task bar freezes from time to time.
My taskbar freezes, especially when I try to change the volume.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important. Eventually the
driver Sound, although the video/display driver and others may be part of the question, as well as the
BIOS.This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
HP 15-5020ca omen: Omen HP 15-5020ca freezes from time to time
Hello
I have a problem with the gel for laptop. It happens every 15-60 minutes and it hangs for 10-15 seconds. During this time the computer does not respond. After this, he worked as usual until it happens again. In the system event log, there are still two events added after each move:Storahci, ID 129
\Device\RaidPort0, restore the device, has been published.Disc ID 153
The operation of e/s to the logical block address * for disk 0 (the PDO name: \Device\00000035) was retried.This occurs during normal use of the computer, which means opening some applications, watch movies etc.
My laptop is guaranteed, so I contacted the service the customer of HP in Poland. After spending 2-3 hours on the phone trying to get help from consultants and to perform various actions such as reinstalling operating system, updating drivers, hardware tests, they decided to send mail and fix it by themselves. The first time, it took a week and the only thing they did was reinstall operating system... The second time they replaced the motherboard (at least they say, it has been replaced) and reinstalled the operating system. The problem still exists, and in my opinion they don't know what they are doing. After 4 months, faced with the question, I lost $2300, my patience and lots of time. Quo vadis HP?
Help much appreciated.
rach_clach
Finally
Do you have
The new Bios F.32 REV: A SWITCH: 1
http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72564.exe
and UEFI
http://ftp.HP.com/pub/SoftPaq/sp70501-71000/sp70869.exe
installed?
-
W4 - 820 freezes from time to time
Hello
I just noticed that my Tablet Windows 8.1 W4-820 "freeze" sometimes: for example, the Metro UI maintains the response, but the rest of the applications take ages to open (email client, Internet explorer, the settings even). Meanwhile, it is hardly possible to start Task Manager to see is there any 'bad' running process.
Anyone have similar problems?
Hello
Thanks for the point! I downloaded 1.16 drivers and installed. Setup noticed that drivers in a system "newer or the same ', but I decided to go ahead.
Installation took literally about 40 minutes (very slowly - it was like PC becomes 100 times slower), but ended up with a few mistakes.
Finally, I gave up and launched a full factory by Acer Recovery Management reset. Have no idea what has been a problem. Lets see how it will be after the reset.
-
FreeCell started to freeze from time to time
FreeCell started to freeze occasionally on our HP desktop computer. I ran anti spyware and virus scans, and I ran the disk check. Is there a Microsoft Freecell download to fix this?
Thank you, John
Original legislative: Freecell Windows 7 6.1
Hello and welcome!
The game has a save file? If so, it may be too much loading.
See if doing a game reset, then save file help to fix the problem.
-
My computer crashes from time to time, and sometimes I have the blue screen errors.
I am running Win 7 on a 2 years old HP Pavilion. I started having occasional blue screen errors, and some applications are a little weird. I haven't added anything recently except the recommended Windows updates. Now when I try to stop, it just display the closing, and I pressed the power switch. I tried to restore to an earlier time a few times in the last 90 days. Suggestions, or I need to reload Windows? If a reload is correct, can I charge for the recovery through my recovery cd partition? My processor is an AMD Phenom 2.90 GB with 4 GB of ram, Win Home Premium software. Thank you... JoeI think that your problem is related to your wireless network connection.
Send a copy of your dumpfile as a shared folder on your drive of sky with a link here.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65To get tips on how to configure your system to create dump files please read:
http://support.Microsoft.com/kb/254649The dumpfile will be created in c:\windows\minidump. You may need to change your settings in Windows to be able to view the file. To show hidden files type Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.
Please download and run the display driver and download a copy of the report he produced on your sky player
http://www.NirSoft.NET/utils/DriverView.htmlPlease download copies of your system logs and Application of your event viewer on your sky drive and post a link here.
To access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, select the Action in the Menu and record all events as and give the file a name. Do the same for the application log.
-
Equalizer waves Audi, video freezes several times after that rendering is done
I'm having this problem and I don't know how to get rid of it.
Try to put an audio equalizer on my video.
I'm following the correct steps but when Render ends without error I play my video has resulted. It freezes several times and continues.
Where is the problem and how to fix it please?
Take the resulting after AVI and load it into Adobe Media Encoder. Choose the H.264 option and use the YouTube preset for it. It will be watchable.
More info here: FAQ: why my output file is huge, and why didn't he play back smoothly?
That's what Rick was trying to participate in his first post.
-
computer freeze when you try to watch a video stream (only) from any Web site
When I try to watch streaming video, my computer freezes, the screen goes black. It will start to play the video to say about... maybe 30 seconds. The computer screen will sweep for a fraction of a second and that's it. It crashes, the screen goes black, it makes that sound you get when the computer crashes. So I have to do a hard reboot to take control of the computer again. I've only had this computer for about 120 days, did not buy good warranty for the software and now I'm stuck.
I got a warning of "problem-solution" and he mentioned a question with the ATI card. I have ATI Mobility Radeon HD 5470 on an Inspiron7010. I tried to reload the OS. did not work.
What can I do to fix this?Hello
If you have tried the steps listed in this thread but still have a problem, please repost this as a new question to the address provided below. Provide any other information system and errors.
Microsoft Answers:
-
Every time I play a video game on my computer crashes. How to solve this problem or better to diagnose the problem? Sometimes when I play a video game in the steam.
Windows 7
64 bitHP e9300zProcessor: AMD Athlon II processor 4 620 X 2.60 GhzRAM: 4 GBGraphics card: NVIDIA GeForce GT 220It does not give me an error message simply stops and restarts auto.When it reboots it just tells me that Windows has stopped unexpectedly.First - check that you have the latest drivers for your motherboard chipset, your video device, your audio device and your network devices. The first place to look for those who are on the Web site for your computer model & specific brand:
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4148392&LC=en&cc=us&DLC=en&lang=en&cc=us
When you select your operating system (Windows 7 64-bit) I see that HP ony supplies those who they provided with the system originally. It's practically worthless.
Yes, where to from here? I would say that you should at least install the latest video card driver - as more modern games can use those strongly...
http://www.nvidia.com/object/Win7-WinVista-64bit-301.42-WHQL-driver.html
Download and install it. If possible, you still have the original driver installed - this is more recent than most 30 months.
It's an AMD 785 G chipset card mother configuration, if their site is correct. Looks like you can download and install latest drivers from AMD for this also:
http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx
I'd say it's a good start.
What else? It could very well be a heat problem. Since it is a desktop - I suggest she get everything, buy some canned air for cleaning electronices and opening of this case and blow off any dust. It can be quite the accumulation. After blowing out, make sure that all the components that look like they 'plug' firmly/well connected. Carefully. Then, put the cover on and connect.
Make sure that there is enough air around the case - put a fan in front of him if you have to.
-
My Windows 7 computer, freeze so many times.
my system freeze several times when operation.and due force to stop system computer, also to the when starting the computer get animated browser due to
Cannot use computer also some time it restarts automatically. Please help & suggest to improve this problem.HelloUse the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Maybe you are looking for
-
Satellite C660-cannot boot from ODD
Hi all hope someone can help me with this. I'm trying to put a new hard drive in a C660 but can't the 'boot from cd' option no matter what I do. If I press F2, I get the windows boot manager with an option.Windows 7 If I go to F8, I get the advanced
-
WLMM hang up when you try to save it as a movie - not responding
Hello! I've been using WLMM for awhile now and just recently started experiencing this problem. When I finish my film and try to save his reach 8% then stops. When I touch it, it tells me its not responding do not and then gives me an error code on f
-
Alienware 17 R2 compatible ssd chips m.2
I bought an Alienware 17 R2 with 256 GB + 1 TB and want to upgrade to 512 GB + 1 TB. There are 4 m2 and right now, there is 1 chip of 256 GB in slot 1. Since there are 4 slots, I think I can add up to 3 256 GB more than chips for a total of 1 TB SSD
-
How to split the PHONE NUMBER in the column of database?
Hello - how to split the telephone within the same column number?Existing column PHONE data3711943874472384879283349262I want to split the data in the same371-1943874-4723etc...Is this possible? I need to do this only through SQL query not PL/SQL.
-
Essbase credential window greyeout
Hi Experts,Greetings!I installed EPMA 11.1.2.3.0.26 yesterday and completed successfully. I can open HSS and workspace. But, when I try to open the EAS, it's not prompting the credentials window.He completely gray and not get anything. Please suggest