Video open in the extension Source monitor / ExtendScript?

Similar Questions

• How to play video files with the extension "rar".

  When I download video files with the extension 'rar', I can't play them with Windows Media Player or QuickTime.

  Could someone please advise what I can do to fix this problem?

  Thank you

  Rar is a compressed, identical to zip file. You must decompress, using an application like winzip or winrar, then according to what file type it is you should be able to play. If you cannot, you will find the codec that makes the Elf, install it, and then everything should be fine, but if you have problems, go back with the extension on the end of the file, as you have with the .rar and ask again.

• Cannot paste, insert a clip to the timeline Source monitor in CC2015.3

  Someone at - it a solution or a fix for this problem? I am currently using, to make a paste insert and am getting an error.

  - The hotkey to make a paste insert does not work in the source Panel to place a clip on my calendar. I get a pop up Clip Fit I've ever seen before, all the boxes are shaded & the only option is the sequence ignore exit point. Then we glue the clip at the beginning of the timeline, regardless of where the playhead is.

  It also States that the source is longer than the destination, regardless of trim (I & O) points I made in the source monitor. The source element is only 3 seconds with my points of toppings, so it makes no sense.

  Is this another bug 2015.3? How can I fix this please. Would like to make a paste simple insertion of the source monitor

  Check that you don't have to points together on the timeline, if the playhead is not parked at the point of in.

  Timeline to points will take precedence.

  MtD

• Windows 8.1 / no video preview in the timeline, source or timeline pane.

  I recently had to move to a PC... Coming from Mac.   It has been more than 7 years for me and it's my first PC without windows XP.   Then... I have an Asus laptop with an I7 2.5Gz, 8 GB of Ram, 2 GB onboard video.  Windows 8.1.

  Brand new.  Just installed first CC and I can't get videos to see a preview.  Either in the timeline, the source pane, or in the main pane.  Nothing.  Installed QuickTime.  Still nothing.  No format, MOV, MP4... Nada.

  What gives?  Am I missing something?   Went as far as the dumping and re install.  Classic Windows, its broken, out and back into the thing.

  Not the files I am importing, because they work fine on my Macbook Air.

  In graphics cards under Device Manager, disable the Intel card, then check.

  Thank you

  Regalo

• Mark button in the CS6 source monitor

  In the first CS6, I noticed he doesn't have a button brand (I) only the Mark Out (O) in the monitor source.  Am I missing something?  CS5 if she had...

  

  On the button + lower right to add them if they are not there.

• Cannot read sequences in the Source monitor

  Hi all, this morning I met a problem that I've never seen before, and I can't find discussions about this anywhere. I use CS6 first to edit a feature-length documentary, and the images amounts to approximately 715 concerts, I'm storing them on a disc of RAIDed 3TO. I worked on the project for the last week or so with no problems, but today whenever I try to open the clips in the source monitor interview, I get the yellow screen "Media pending". Timecode was audio parts sometimes independent, sometimes it just runs silently. Sometimes the images begin to play, sometimes the right source monitor panel turns green and is sitting there during the execution of the timecode. I opened another project to see if the question was to the system-wide, and reading worked very well there. THEN, when I came back in the doc project, opening clips in the source monitor opens the wrong clips, and then it started to open the clips of the other project, I had just tested. I'm supposed to have a meeting with the client tomorrow, and I am at a total loss. I tried to clean the media cache, I reloaded the program, I rebooted the computer, nothing did. Sometimes, video clips start to play and work for about 30 seconds and then I move the partition and everything freezes again. In addition, the program stops to respond at the slightest provocation, just right click on a clip to get its properties caused the program stops responding.

  I'm under Premiere Pro CS6, windows 7 x 64

  16 GB of RAM

  HDD SEARCHED with 655 GB free of 1.81 to

  NVIDIA GeForce GTX Graphics Card 680

  The images vary. It's all 1920 x 1080 @ 23.976 fps, some is videos .mp4 mpeg with an aspect ratio of 1.0 and the rest is files .mov mpeg digital SLR with an aspect ratio of 1.0.

  If I am not to provide certain information, please let me know, and any help is greatly appreciated!

  Will be

  UPDATE: now any read's wobbling or slow. I tried dragging the clips in the timeline to extract only the bits that I need right now, and my the program monitor just turned black while the audio ran under

  UPDATE 2: I thought I might have a problem of memory, so I bought more RAM, up to 32 GB now, does not resolve the issue. A user of CreativeCow recommended to save my files to preview on my desk. Did this, no help. I pulled a few clips (about 40 minutes) on the timeline to see if I can make it out and extract of what I need. No luck, the rendering is running quickly for a minute or two and then slows down to an image every 5 to 30 seconds. Rendering of images in the same timeline plays very well, but nothing works in my source monitor, nothing is non-rendus works in my calendar. I'm at a total loss and 4 days late now. Any help would be massively appreciated

  Hey Kevin, thanks for getting back to me. Unfortunately, none of these solutions worked for more than a few minutes. Honestly, I could just be overloading my system. I need to make the updates anyway. I migrated the project of a new super workstation to which I have access, and it seems to work well so far. It is unfortunate that I can't work from home, but the project is on track, that's all that matters.

  Will be

• Why the source monitor keeps a history of the clips?

  I can first coming from a background in FCP7.  I find it strange that the first source monitor keeps a history of all the clips that you have previously loaded.  Why does do this, and is it possible to turn it off?  I'm used to FCP, where a new clip from loading completely destroys everything that was in the front source monitor.

  The reason why I noticed, it is when working with sequences multi-cames.  Example: I'm playing a multi-clip sequence in the source monitor.  Later, I add a new angle.  The next time I play it in the source monitor, the angle is not there.  I have to 'close' and re - open in the source monitor to see the change.  This is disturbing, particularly because it does not even give a warning that "what you look reflects exactly the timeline."

  In fact, in FCP, recent clips are listed in a menu pop up, they can be charged in all at once. Avid has a similar function. Premiere Pro's better allowing you to scrolls with the next and previous command or go directly to the first and last clips. You can close all clips, but probably not exactly as you wish.

  Feel free to make a feature request: http://www.adobe.com/go/wish

  Here is a screenshot of the options so that you can create keyboard shortcuts:

  

• Time-video playback after the clip of transfer from Windows XP to Windows 7

  Original title: Windows XP movies play well on windows 7

  Windows XP movies plays not on windows 7

  Windows XP movies plays not on windows 7

  Hello

  What I mean with my question is I have movies or videos running on windows xp in .wmv format, wma. I migrated this clip for Windows 7 and there is a delay with a black window instead the videos before the video can show. Therefore, do not work well.

  Thank you

  =======================================
  Just a guess but maybe your video driver would need
  an update.

  Reduce the graphics hardware acceleration is a
  a simple way to test the video driver.  If there is one
  improvement... is a strong indication that your video
  driver requires an update.

  Proceed at your own risk *.

  (The basic steps for Windows 7 should be...
  Start button.
  Control Panel.
  Appearance and personalization.
  Display settings. /
  Advanced Settings.button.
  Troubleshoot tab.
  Change settings button...
  Click left/drag the acceleration hardware cursor for
  the left, one notch to the right of None / OK.)

  Now... try to play one of the video clips of problem and
  see if the problem is improved. After the test, return the
  slider to full.

  (Note: If you can't adjust the graphics hardware)
  Acceleration... that means you've got integrated
  Graphics and do not have a separate graphics card.

  In this case, you can always try to update video
  driver, but the best source would be the computer
  manufacturer or the manufacturer of the motherboard.)

  (For a real kick in graphics performance, installation)
  a separate video card may be something to consider.)

  To find an updated video driver, search support
  your manufacturer of computers and video sites
  card manufacturer for an updated video driver...

  The following article is maybe worth a visit:

  Update the graphic driver - Windows 7, Vista
  http://helpx.Adobe.com/Creative-Suite/KB/update-graphics-driver-Windows-7.html

  If you find a video updated driver... it would be a
  good idea to create a system before Restore Point
  install. Also be sure to follow any installation
  instructions which may be available on the download site.

  Good luck...

• Open the file in the source via the extension monitor

  I want to be able to locate some files in an external window (could be browser or application) from the list. The files are already imported into the project. When I click on a file, I want to open it in the source monitor. Is this possible?

  Hi, Jostein, I contact you directly to discuss further.

• Audio waveform disappears from the Source monitor after opening another audio clip

  I use Premiere Pro CC 2015 on an iMac (late 2014) of new 27-inch Retina 5 k with 8 GB of RAM.

  I've got 5 takes of the same voice that I'm editing into a simple video "How-to" recorded at the screen. I'm pass between the clamps and picking at the take, that I prefer and move it into the timeline.

  Problem is, once I open an audio file and then pass away from him to another audio file in the monitor Source Panel, the waveforms on this clip will not appear when I open it in the Source monitor. See waveforms is a unique case, unless I restart Premiere Pro. I can still hear everything and I still see the playhead moving across a green screen, but the waveforms are gone. It works fine the first time I open the clip.

  I waited about 10-15 minutes to see if it's just to take a second to reload the waveforms, but none of the clips appear in their new waveforms unless I restart the first. I tried to open a video and then come back to an audio clip. I have actually managed to do come back simply by moving the source monitor Panel in its own window separate from the table of mixing, effects, etc. but it happened again the next time I went to another audio clip and no amount of monitor source is fluttering it don't come back.

  Is there something that I am missing? I can still change course by listening to each piece of the voice-over begins, but without seeing it, it's a real pain.

  I think that this has been fixed with the latest update. No more problems!

• Get information for clip loaded in the source using ExtendScript monitor

  Hello

  So, the short version: I was wondering if there is a way to get information about the clip currently loaded in the source, using ExtendScript monitor. Specifically, I am interested in the name, from timecode and in/out points. I don't see anything obvious in the ExtendScript Toolkit data browser, but I thought I'd ask.

  The long version of what I'm trying to do: I have a clip in the source monitor Panel that I know is in the active sequence. I would take the points of entry/exit from the source element and those like entry/exit points in the sequence. It's kind of a hack to get around the fact that you can't associate speech analysis with a multicam clip so I cut with one of the audio clips in the multicam clip and then I am translating those points to the multicam editing sequence. I have a way to do it with an AppleScript macro, but I would find a more robust solution (and cross-platform).

  Thank you!

  There is no possibility of returning to an element of the Source monitor to real projectItem in Agency CC 2015.

  However, you are not the first to ask such a feature, and (ahem) I can neither confirm nor deny that it can be added in the near future.

• Source monitor displays the desktop scrambled instead of video

  When I run PP CS6 and try to play the film screen in the source monitor displays a blurred my office instead (attached image) version. Audio works, the read head movements and changes in power button, but it is not any video.

  This problem started recently, after about 7-8 months of first flawless performance.

  Some system information and software:

  Premiere Pro CS6 version 6.0.5

  Running on a MacBook Pro

  OS X 10.8.5

  Processor Intel Core i7 2.6GHz

  16GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  

  If you need / want additional information just ask.

  Thanks in advance.

  Hi Sportz007,

  Have you tried trashing prefs?

  Thank you

  Kevin

• How open only a single clip in the source monitor Panel?

  OK, the answer to this question may be simple... If all goes well...

  Right now whenever I open a clip in the source monitor Panel it adds to the drop-down list.

  Well... but I'm opening and closing hundreds of clips per day, and after a while I noticed that it seemed to slow down the entire system PPCS5.5.

  It seems that the PP seems to keep each clip I open... active.

  

  Is it possible not to allow only a single clip to be open at a time in the source monitor... other than having to close their first? (would be ideal if there was some sort of shortcut as shift-doubleclick)

  No, nothing like this. I do not think that this opening up of dozens or several clips in the Panel Monitor Source would lead to slowing down the system important (at least, I never noticed this). I suppose there might be some kind of memory leak, but I'm not sure.

  What is your source footage? The system seems more sensitive after you close the clips in the Source monitor?

• link to the sound and the video in the source monitor

  Hello

  I use CS3. I have a clip mpeg video and a file audio wav on the timeline. The video / audio is not multiplexed. They are connected on the timeline. What I have is the video and audio link and go in the source with the hardware monitor...   I can change the subitems etc. of the source monitor and put in a new video layer on the timeline.

  When I put the video and the sound file in the source Panel, edit the video and slide on the timeline that this video goes to the timeline.

  Is there a way to link in the source, so the video monitor and sound can be edited to timeiline?

  Thank you

  Stem

  Rod,

  I'm not aware of a direct way, one click to do this, but you could put your Audio & video on the rails of the good in a sequence, sync them, and then export a multiplex. Import into a new sequence, and everything will be content, as you wish.

  Maybe someone will point out this method in one click. You have CS3, right?

  Good luck

  Hunt

• U2414H DisplayPort 1.2 STD Set Up - monitors will not get video Signal from the graphics card during start or restart

  * What specific Dell monitor? 2 two U2414h monitors with MD214 - package of multi-monitor support
  * What specific model of computer, desktop/laptop? Workstation HP xw8400, Intel Quad Core Xeon CPU E 5335 @ 2.00 GHz, 4.00 GB of memory
  * What operating system? Windows 7 Professional 32-bit
  * Which video card? AMD over-pants V3900
  * Which ports are available for the video card? DisplayPort 1.2 STD, Dual-link DVI
  * Which video output from the video card port video on the port monitor do you use? Output Mini DisplayPort Display port in
  * What cable are you using to set the video card to the monitor? Adapter DisplayPort to MiniDispayPort - we came with every Dell monitor
  * You use the Dell supplied cable? Yes - two monitors

  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. This resolution should match the resolution of the default monitor. The two monitors: 1920 x 1080, 60 Hz

  * Brief description of the problem monitor? Monitors have been implemented following the instructions on page 25 of the Dell online manual to connect the monitor to function DP multi-flow (MST). DisplayPort cable is connected to V3900 output MiniDisplay port DisplayPort graphics card in the 1st U2414H; second DisplayPort cable is connected to the DisplayPort on 1 U2414H monitor output and MiniDisplayPort in the 2nd monitor U2414H. Dell U2414H drivers have been installed from the CD provided and both recognized by Windows. V3900 graphics card Driver is up to date with the EyeInfinity software. Source of input on both monitors the Mini Display Port value. Display settings on both monitors Display Port 1.2 value activate. Resolution of the screen on Windows 7 shows: (a) two separate Dell U2414H (mini Display Port) screens, with each resolution 1920 x 1080, multi (b) displays the value "to extend these displays. The two views work with Setup leading up to and acknowledged by the graphics card.

  Problem 1 - all the time - monitor power buttons are lit, the computer is turned on, then monitors lights don't - they show 'Power save mode' and then turns off. To hit the power button on the computer to shut down Windows. Only way to get these on monitors is unplug cords from the back of each monitor, wait a few minutes, plug in the power cord, start computer and then both monitors will start up and sign of windows to the screen will appear and monitors will work. Normal operations for a full day of work if you do not restart. If you need to restart during the day (like when you get a software update), the same thing happens. Start the computer to restart, but the monitors come back on not and remain dark. There is nothing wrong with the graphics card V3900. He is certified by AMD and DisplayPort.org to work in an environment of STD DisplayPort 1.2. I had previously two 215tws Samsung SyncMasters connected to each output V3900 Grahics card and they work very well in extended mode for years until a SyncMaster 215tw started shaking like crazy. A SyncMaster has been connected to the out display with a dongle and a DVI cable Port. The other SyncMaster was connected to the DVI output on the graphics card. So I decided to buy these two U2414Hs. Technical support Dell after many phone calls and e-mails finally advised me that there is a problem of "compatibility" between my computer and the U2414Hs and recommended that I return the monitors. On the web site of the U2414H AMD has not been certified by AMD to work in a DisplayPort 1.2 STD Set Up. Other former Dell monitors are certified by AMD to work in the Display Port 1.2 Setup. DisplayPort.org lists the U2414H to work with Display Port (it does not say that it will work in a DisplayPort 1.2 Set Up).

  Problem 2 - shift perceptible in the entrance of Microsoft Blue Tooth keyboard and mouse and PS2 Keyboard and mouse. All the drivers are up to date. When you type a phrase, it takes a few moments for the text displayed on the screen using a keyboard. Both the mouse connected and the Bluetooth mouse are unresponsive sporadically for a few moments until they finally react. It happens regularly during the day. The monitors provide excellent clarity when you work. The stand is ideal for office property. Before these monitors are returned if no one knows what causes these two problems and does anyone have a solution? Should I stop using the Display Port 1.2 and hang them using HDMI with active dongles? If I have to return these two U2414Hs, I considered the 2 two U2413s. Someone at - it all opinions on the last U2413s from Dell? I have read some real problems with ghosting that I just haven't the time for more. The remanence correction in the models of U2413 sold in 2014? There are very few monitors on the market with Display Port in and out to the back to support DisplayPort 1.2 STD Transport.

  Thanks for any input.

  I had to remove my VGA HDMI DV card and now the DP (display port) works very well. Don't need to use a HDMI cable. Display Port 1.1 is reported as the problem in order to remove the card solves this problem.