Video pre and Post 4.3.0

Similar Questions

• How to read digital signals with pre-and post-trigger on a card PCI-6251

  I have 22-bit parallel position of data entering TTL lines to 16 kHz with a pulse of marker that says when the data is valid. I also have a fault line which gives an impulse when an error condition is met. I want to read in the 22 lines of position with 500 positions of pre-event and post-event 500 data when the fault line says. How do I pre and post-déclencher lines digital input on a card PCI-6251?

  If this is not possible on this map, which maps PCI would be possible?

  
  

• Pre and Post build screws

  When generating pre and post screws we have the possibility of running, is possible to get that build spec, they were launched since (that is if you have multiple versions of a project)? Also, is there a way to pull the output through nodes of property directory, or what I need to parse the XML project?

  I did a quick test with a selection of pre-designed programmes VI and the model that is already created by the build specification provides two points you requested by nature.  I'm just wired to the top of some indicators and forced the FP to show test, but I guess you could save in a file or put her in something else needed.

  

  

  It comes with LV 2013 (32 bit).

• SRM controls (pre and Post turn on)

  I'm looking to what hooks are available under SRM to run scripts.

  Ideally, I would like to be able to run scripts Powershell VI Toolkit (which would be pre power on for orders of type VM and post-puissance on orders of type guest VM) and Windows Scripts (post-tensioning).

  I first thought that these scripts (as configured by the VM in the cable group) would run on the virtual machine in question.  I realize that they both run on the host SRM (the manual is not explicitly said, that could be useful!).   To get to the point, what I have to do is to identify the virtual machine that will be started so that I can script events to occur for this virtual machine.  I was looking for variables (i.e. something like VMName and GuestName %) that would allow me to execute commands to reconfigure the computer in question.  Does anything like this exist, or there at - it another way to do this?  If there is not, I consider something of a gap, I spend the VMname as a parameter to the scriot for each virtual computer.

  Thank you

  AX

  Here is an excerpt of an article that I'm working on. I think that table 6 includes the types of

  the variables you are looking for.

  Order steps run with the identity of the local system account on the SRM

  on the recovering site server host. When a step of the command runs, a number of

  environment variables are defined in the runtime environment. Table 5 lists the environment variables that are available for all stages of order.

  Table 5. Environment variables available to all stages of order

  Name	Value	Example of
  VMware_RecoveryName	The name of the recovery plan that runs	"Plan A".
  VMware_RecoveryMode	The recovery mode	'test' or 'recovery '.
  VMware_VC_Host	The host name of the host to vCenter site recovery	'vc_hostname.example.com '.
  VMware_VC_Port	The network port used to communicate with the host to vCenter	'443 '.

  Additional environment variables listed in table 6, are affected if the step of the order runs on a virtual machine that is recovered.

  Table 6. Environment variables available to the ordering steps running on virtual machines recovered

  Name	Value
  VMware_VM_Uuid	UUID used by vCenter to uniquely identify this virtual machine
  VMware_VM_Name	The name of this virtual machine, as shown on the protected site
  VMware_VM_Ref	The managed virtual machine object ID
  VMware_VM_GuestName	The name of the guest OS as defined by the API of VIM.
  VMware_VM_GuestIp	The IP address of the virtual machine if it is known.

• quadrant ICS pre and post scores

  I would be interested in your pre - ICS and ICS-post on Quadrant Standard scores. I get between 2800 and 3000 on the MAXX, I think that you guys will get even, maybe even better. Also I was wondering if anyone of you has moved to 1 .2GHz now on ICS. Thank you and hope you enjoy your 'new' Bionic! You can even use the new screen capture feature to post.

  
  

• I need assistance with video editing and post production building

  Hello

  I decided after a long time to invest in a PC for me to use the video publishing house (at work, I have dual Xeon based build). After a long search I opted for this configuration and I am interested in your opinion and maybe a few suggestions for improvement. I chose X 99 platform for future compatibility upgrade and the CPU I chose now, I can replace later down the road if/when Intel realeases the 10 new core CPU i7 LGA2011-3. So I didn't want to spend more money on the K 5930 or 5960 X at this time, and I feel the 5820K with a stable overclock will give me the results I want for now, as I edit 1080 p videos for now.

  I turn mainly on SONY PMW - EX1 and NIKON D800, with sometimes images of k 4 from DRONES. I use PP to publishing, AE for the post production and motion graphics, SOUL of renders, Lightroom and PS for RAW photo editing.

  Case: Fractal Design R5 Blackout edition

  PSU: CORSAIR 750W 80 + modular Platinum HX750i (I hope that it will be enough even with overclocking)
  

  MB: ASUS X 99 PRO / USB 3.1

  CPU: INTEL Core i7 5820 K 3.3 GHz 15 MB BOX LGA2011-3

  CPU cooler: NOCTUA NH-D15S

  RAM: CORSAIR Vengeance LPX CMK32GX4M4A2666C16 32 GB (4 sticks of leave options to upgrade to 64 and take advantage of the quad channel)

  GPU: ASUS STRIX-GTX970-DC2OC-4GD5 4 GB PCIe (is it useful to the 980 for these given additional CUDA cores it is $ 200 more?)

  SSD1: Cache files SAMSUNG 850 series 250 GB 25/S600 EVO - OS, PROGRAMS and PP

  SSD2: SAMSUNG 950 PRO 512 GB SSD PCIe 3.0x4 m2 - MEDIA PROJECT, FILES PREVIEW and OUTPUT of RENDERING

  HDD1: WD WD40EFRX 4 TB 64 M/S600 Red Edition -j' I may be obtained with two drives in RAID1 to memorize everything, after I'm done with the project and copy everything SSD2 to HDD1, but for now, I'm going with a single, and modernize if more space and backup is necessary.

  I intend running 64-bit PRO 10 Windows.

  Let me know what you think and suggestions and opinions are welcome.

  THX

  good deal and CPU cooler, x 10 core i7-6950 is widespread about 6 months out and compatible with x 99. You wouldn't have to upgrade right then, but every time you felt the need.

  If you are looking for max overclock stable and expansion as a new video card, a quality 1 k watt will be a better option. for a little more, the SuperNOVA 1300 G2 evga and XFX P1-1250-BEFX are on sale at a discount, if you don't mind discounts. the hx850i corsair is also a little more with his rebate, the hx1000i jumps a bit with no refund.

  GPU - core count, the gtx 980 would be worth $400 vs gtx 970 price. the 980 gtx has more than just a difference of base number, but it still makes the $500 + unattractive price tag. If you think you need more power now, take a look at the gtx 980ti. If not, go with the gtx 970 and if / when you do not need an update, add another to the creation or upgrade to pascal or later, when nvidia releases.

  If possible, I would avoid mirror or any what raid for backup. RAID (same mirror) can add an additional point of readers isolated data and data corruption or failure. three separate copies is good for critical data, two if not so important. using a Cloud Computing service may be a good option for one backup copies.

• What is the correct format for a single. File ALX for pre and Post 5.0?

  Hello

  We have an application which works fine on the pre 5.0 BlackBerry OS.  We have one ALX file that uses the _blackberryVersion designation to determine what COD files must be installed to which devices.  We do this because we build separate sets based on the device, for example, the version of the storm is more optimized for the storm devices.  It was all working well, but with the release of BlackBerry OS 5.0 OS versions seem to have changed.  Previously, the storm was 4.7.0.x and when the tour came out it was 4.7.1.x.  Now, however, so the Bold 9700 and Storm 2 are the two 5.0.0.x to the less based on the OS versions for the two simulators available right now.  It is therefore impossible to use the name of _blackberryVersion in the ALX file, at least for us, since we have different files COD for the storm, with touchscreen and other devices without touchscreen.

  So, I try to understand what the appropriate method for the use of a single file ALX is in this case.  From what I can tell the _blackberryVersion element uses only the three first sections of the version, for example 4.7.0 or 5.0.0 so even trying to make it more specific would not work and would also not practice for all minor versions that will be potentially different carriers.

  I did try to use the name of the series, for example , and even that would not work.  I also tried with 9500 | 9530 | 9550 and always had an error in the Application Loader saying there is no compatible software.  At first I thought it was due to some sections of with _blackberryVersion and then some with the series.  But I tried a new ALX file with just the designation of series and still no luck.

  Has anyone found how to do this properly yet?  Are there examples of ALX files which series =? Someone at - it examples of work from ALX files that use the _blackberryVersion and the series?

  Before everyone jumps on me, I'm not the real Director of enforcement, I only update the ALX file.  So I don't think it's possible to have a single file of COD to build, but at that time, that never would have happened so I need to find the best solution with different files of COD, that shouldn't be a problem because she supported and described in the documentation.

  If I need to display the ALX file please let me know.

  Kind regards

  David Dewaele, Jr.

  The correct series attribute for 9500 is "Thunder".

  You can find that where she attributes to all here-(for normal installations)

  C:\Program Files\Common Motion\AppLoader\Device.xml search

• Removing unused columns - pre and post checks

  Friends...

  DB: 11.2.0.3

  OS: Linux

  I have a few quick questions in relation to removing unused columns which I intend to do on the production database (5 tables 20 GB each)

  The columns are already defined as unused tables, but I'm trying to get a backup plan for this tables if something goes wrong, while editing the table.

  Could some experts share their experience with me?

  1. What backup plan, I can have 5 tables to retrieve them in case something goes wrong?

  (I thought about import export, but I think import will fail if I try to import after that "alter table drop unused column" did not order)

  Also some tables have 500 lines and taking the export compliance will be problematic.

  2. any request to know in advance which package could be invalid after the fall of the column?

  3. statistical does is invalid?

  (According to my knowledge, I think that it won't affect his stats and also tested this and stale_stats column was not after a column.)

  4. do I need to scan the table or rebuild indexes to ensure that this drop column does not affect the performance of the application?

  5. any other minor/major that keep them in check after a fall unused column?

  Thank you

  Mike

  @rp0428... I understand your doubts and yes it's true, there were 5 tables of 20 GB each and additionally 5 tables, there are a few smaller tables I thought won't create a problem. For large tables, I did used control point.

  As always, I have tested plan in dev environment with the same size/data lines but a unused fall was quick and no problem with cancellations is why during production, it took me surprise.

  I had cancellation of 32 GB, so obviously, I was confident of small tables)<5 gb)="" should="" definitely="" fit="" in="" 32gb="" (but="" it="" wasn't="" the="">

  OK - but we can only go through the information you post and you don't post anything of this.

  If you had my question would be why you do not use "checkpoint" when you tested and why you didn't used it for this 5 GB table in production that generated 100 GB of REMAKING?

  My next question would be: what PROBLEM have you tried to solve by dropping the unused columns? Your application was working fine so why was the decision taken?

  And the reason for this question is that ANY significant changes to a table (standard partitions, add virtual columns, split partition, etc.) is ONLY suitable for technical purposes.

  There are almost always other changes that could / should be made and it is usually beneficial to make all these changes as a whole. Common examples include 1) get rid of the old data (dilation), 2) addition of such constraints as NOT NULL, 3) a table partitioning, 4) adding new columns - perhaps with NOT NULL value and/or default values constraints.

  Since 'other' someof these changes can be problematic if done online, it is generally advised to do a thorough analysis to make sure that you have identified ALL the changes you want, you can then do all at once. Often the best solution is to re-create the table and data using the DEC.

  1. a normal 'drop unused' rewrites all the blocks. It's not moving lines to other blocks - it essentially tightens just online content in order to remove all the content of the unused column.

  2. a normal 'drop unused', even if you use control points, leaving the "unusable" table until the WHOLE picture was treated. This means you NEED to perform the operation before normal re-use of this table, you can resume

  3. a normal life 'unused drop' will NOT free space which can be used by other objects - the same lines occupy the same blocks - the lines are just "small". Therefore, there is NO space to release.

  Creating a table (e.g. DEC) you can use a bulk loading and parallel operations and move lines of new blocks. It can also if take care of these 'other' I mentioned with little or no extra charge of the changes.

• pre-and post loading maxl script in ODI

  I try to call a maxl script in the ODI interface.
  
  I did the following chages in the properties of the target:
  
  PRE_LOAD_MAXL_SCRIPT D:\PLAN\Results\Scripts\ODIpreMaxl.mxl
  
  I got the folloing error message:
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (most recent call changed):
  File "< string >", line 89, < module >
  at com.hyperion.odi.essbase.ODIEssbaseConnection.executeMaxl (unknown Source)
  
  at com.hyperion.odi.essbase.AbstractEssbaseWriter.beginLoad (unknown Source)
  
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  
  at java.lang.reflect.Method.invoke(Method.java:597)
  
  
  com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: cannot run the program "essmsh": CreateProcess = 2 error, the system cannot find the file specified
  
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2457)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
  at java.lang.Thread.run(Thread.java:662)
  
  
  -Raj

  I think I know what the problem is, he's trying to start a Maxl session by running essmsh and he can't find it.
  If you go to the command line and type essmsh what happens?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• can anyone hack Skype video calls or save and post in all sites

  Please answer me soon anyone can hack and post video Skype in all sites...

  Please tell me the right thing

• When I visited video pre elements 12 or 13 and save work later. When I bring it to the top the rendered file is not registered. I have to make it again. He can be saved. 1 pre Ele would save.

  When I visited video pre elements 12 or 13 and save work later. When I bring it to the top the rendered file is not registered. I have to make it again. He can be saved. 1 pre Ele would save.

  [transferred to Photoshop Elements discussion forum]

• Organizers shared, PRE and PSE?

  Hello

  I recently bought a combined package of two applications: Photoshop elements 8.0 (PSE) and elements of first 8.0 (GER). For me, and very practical, because I have a lot of photo and video. Marketing, I imported a directory and a subdirectory in EPS, but I also saw a lot of. MTS files, I don't want to post-secondary studies, but FORWARD!

  I discovered that PRE and PSE aren't really separate applications, but share the Organizer; is that correct, is that convenient (it takes tim to the trial initially the.) MTS files!)

  I prefer separate organizers in PSE and PRE, but maybe I'm forgetting something?

  Thank you for the tips and tricks!

  Harry.

  Harpri,

  You are right. PSE 8 and 8 PRE share the Organizer even.

  Thank you

  Vaishali

• Problems with the video card and sound card on Toshiba model #PSLCOU - 02701G

  I bought a new laptop in 2009, and it is a Toshiba, model #PSLCOU - 02701G. After about three months the video card and the sound began to spoil. It's what he does, I can go on U-tube or any web site that has a video to watch like CNN news, etc. What it does is it starts to play and the video and the sound is good and he paused for a few seconds and starts again, new breaks and pauses, starts, pauses, starts. He does it all the time, and I was wondering if you all have any idea whats going on? Help? Help?

  It really sucks when you try to watch the news. Also, I put a CD or DVD into the laptop and it works perfectly. I can watch any DVD or listen to a GREAT Cd.

  How is your network connection?  Sometimes, the system needs to create a cache to store the downloaded information and if the download is not pass quickly enough the system will freeze while wiaiting for download to catch up - not a problem with your sound cards and video, but with the speed of Connection on the website or on the network itself (or your network equipment).  This looks like the case if the DVD and the CD's works fine.  Check your internet connection and try to download the video pages to see if the problem is with all the downloads, or only those on a site.  You can contact your ISP and have them help check you connection and settings and the modem for problems or changes, you can do to improve things. Sometimes happens to me as well in the internet connection runs slower than normal and there is nothing that I can do but wait to accelerate - and it's frustrating.

  You can get in trouble with your device drivers.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you need you to do all you have time to do, but at least the network card, sound card and video card - they can help way beyond simply solve this problem), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Flash player crashes. Video stops and goes. Will not play consistently. Is there a way to update flash player? What are the steps to do it?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I can't watch the videos on my laptop. Videos stop and go without running consistantly unless I wait long for it to download. Is this a problem with my Flash Player. If so, how do I update to solve this problem? You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Uninstall Flash by using the uninstall program Flash Adobe link above.

  Flash is sometimes corrupted.

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  Reinstall Flash, after 1st unchecking / uncheck the toolbar Google download option there.

  If this does not work, try here:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.
  Mick Murphy - Microsoft partner

• Would like a recommendation on a video card and Psu - Hp Pavilion a6827c

  I'm willing to spend about $ 150-200 on a video card and power supply (if I need it). I could get a few recommendations.  Would appreciate any advice!

  RJ, here is a link to the pages "Product card" for your computer:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=16113&tmp_task=prodinfoCategory&LC=en&DLC=en&cc=us&lang=en&product=3942022

  Your power supply unit (PSU) is 300W.  A 400W 600W PSU in would you buy a much better card.

  Here are two links to the PSU that I recommend:

  http://www.Newegg.com/product/product.aspx?item=N82E16817139008

  http://www.Newegg.com/product/product.aspx?item=N82E16817341001

  I actually had the GXS OCZ 600W.  The Corsair is also highly recommended in the forum.

  Now for a video card.  The location on your motherboard is PCIEX16.  You can use PCIEX6 2.0 as well.  It is backward compatible.  However, you will pay a little more and will not actually benefit from improvements.

  The brands I recommend are XFX, BFG, EVGA, Sapphire, PNY and Diamond, in that order.  I actually have two XFX cards; GeForce 7900GTX 512 MB (do not use) and ATI 4870 XXX 1 GB.

  Here is a link to the Web of Newegg site:

  http://www.Newegg.com/store/subcategory.aspx?subcategory=48&name=desktop-graphics-video-cards

  To the left of the page, there is a list of manufacturers.  By clicking on "More" will extend from the list.  See the section 'Customer reviews' and 'Technical data' to find one that meets your needs.  Then, post the link to the card/s that you like and we'll help you choose a.  It is the best way to learn what you need to know.  Much better that we choose one for you and post the link.