VIDEO TUNER Hauppauge HVR2250 on my Aspire3100-U3072 INSTALLATION PROBLEMS?

Similar Questions

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

• Where are the video tutorials I have seen generated from the Installation of PhotoShop SC.5 disc?

  Where are the video tutorials I have seen generated from the Installation of PhotoShop SC.5 disc? How to work on a face, New CS5, how to undress in a background? etc. Very useful. You want to start here.

  Must be in the defined drive.  Probably not loaded on the computer during the installation.

• Why vista Media Center does not recognize my card tuner Hauppauge 1850

  I just install WinTV-HVR-1850, Manager of device States work properly, yet Media Center does not recognize the tuner... Keep received message "no tuner found" not could someone explain what I need to do.

  Hello

  I suggest that you install the latest driver and software from the Web site below and check if it works:

  http://www.Hauppauge.com/site/support/support_hvr1800.html

  Try to contact the hardware manufacturer for assistance.

  Hope this helps,

• update of kb2249857, diasables my TV tuner (hauppauge)

  update refers to the size of the HARD drive. Why this effect tuner s/w? TV window says no. Tuner.

  Hi Futboldon1,

  Have you tried to remove the update yet?   Please see how to makehere.

  In addition, once removed you can then try to manually install the update again to see if that helps.  This link ishere.

  Finally, if you can't do it anymore, you can try to do a system restore to before the updates were installed:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I use firefox (37.0.1). Since last week, I am unable to play any kind of videos youtube esp. I'm in a big problem. Please help me.

  I use firefox (37.0.1). Since last week, I am unable to play any kind of videos youtube esp. NO change in system or the installation has been made. Please help me

  Please try first: difficulty common audio and video questions

  Second: try to reinstall https://www.adobe.com/support/flashpl.../downloads.html Flash

  Third: To ensure that all drivers are up to date: update your drivers graphics to use hardware acceleration and WebGL

  What were the results?

• What is the reason for the slowdown of my computer when I open the heavy software or video game HD? (read the details of this problem)

  IM using windows xp service pack 3.  whenever I open a heavy software on xp, which crisscross the movie hd, game play as nfs most wanted, slow down the computer starts. every time that I discovered the video that is larger than 2 min on youtube on 360 or more depth, it slows down my computer.
  I have to ride every time, I have to put on the stand mode every time and again, I have to come to the screen where worked. I have been on the computer for 2 hours I have market and shut down my pc every time what pc slows down.
  There was no this problem, I was faced with when I buy a pc. but this problem starts from June 2012, im facing this problem every day.
  When I ask the local store (computer scientist), he told me to format the xp and install it again.
  I know that the formatting every time is not the solution to the problem. because I had formatted my pc several times, but this dosent problem solved. And there is no chance of virus in the pc, because I invested my money in total security from bitdefender which is updated each time software.
  so, my question is what is the problem to my pc? is this hardware or software problem?  What will be a solution to this issue?
  my pc config:
  ---------------
  Processor Processor amd athlon 64 * 2 dual core 6000 + 3.2 GHz

  RAM 2 GB

  motherboard asus m2n68-am

  temprature
  --------------------
  kernel 1.44v
  + 3, 3V 3.28v
  5V 5.02v
  + 12v 12.28v
  CPU 62
  RAM 46C
  CPU 3360 RPM

  Internet browser firefox 10.0.1

  Syatem summary:

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  Name of the System x
  System manufacturer system manufacturer
  System product name model system
  System Type X 86-based PC
  Processor x 86 family 15 model 67 Stepping 3 Mhz-AuthenticAMD ~ 3013
  BIOS Version/Date American Megatrends Inc. 1804, 23/08/2010
  SMBIOS 2.5 version
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  Name of the user x
  Zone x
  Total physical memory 048,00 MB 2
  1.08 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 3.35 GB
  Paging file C:\pagefile.sys

  view summary

  Name of the NVIDIA GeForce 7025 / NVIDIA nForce 630A
  PCI\VEN_10DE & DEV_03D6 & SUBSYS_83A41043 & REV_A2\3 PNP device ID & 267A616A & 0 & 68
  Adapter Type GeForce 7025 / nForce 630A, NVIDIA compatible
  Adapter Description NVIDIA GeForce 7025 / NVIDIA nForce 630A
  Adapter RAM 512.00 MB (536,870,912 bytes)
  Installed Drivers nv4_disp.dll
  6.14.11.8634 driver version
  File INF oem5.inf (section Section001)
  Color plans 1
  4294967296 colors Table entries
  Resolution 1024 x 768 x 75 hertz
  32 bits/Pixel
  X memory address
  X memory address
  X memory address
  IRQ channel, IRQ 20
  Port of e/s-0x000003B0-0x000003BB
  Port of e/s-0x000003C0-0x000003DF
  X memory address
  Pilot c:\windows\system32\drivers\nv4_mini.sys (6.14.11.8634, 7,60 MB,

  No, im not using bitdefender, or 2 firewall at a time, I im using ms security essential.
  but still runnig pc very slow

  Please, read carefully and then provide the right solution...

  Do you have the Windows Desktop Search installed issue?

  Your Firefox is way outdated, then you need to update Firefox (help on Firefox).

  My version is 16.0.1

  Your msinfo32 says your NVIDIA card:

  6.14.11.8634 driver version

  To translate for the NVIDIA speak, you shift the decimal point so that it becomes:

  186.34 (your is out-of-date)

  NVIDIA says that your version of the driver should be 308.61

  I visit the page of NVIDIA GeForce Driver and let scan them driver online take a look at your system and if they offer you a update, take it, install it, reboot and recheck your video diver version and it should look like this:

  6.14.13.0861 driver version    (that's what mine said too)

  Download the NVIDIA site here:

  http://www.GeForce.com/drivers

  Reboot and double check the versions and see what things look like.

• I can not watch videos on my pc, how can I solve the problem.

  When I go to You Tube any of the videos will show, it is a black space.

  Hello

  1 is this number reserved only to online videos?
  2. what internet browser do you use?

  Method 1.
  Try to play another video on youtube and check.

   
  Method 2.
  Given that most online videos require Adobe flash to work I suggest you install Adobe Flash player in Internet Explorer.
  I recommend you update Adobe flash player on the website below:
  http://get.Adobe.com/flashplayer/
   
  Method 3.
  a. If the problem persists, you can optimize Internet Explorer.
  See the link below for more information.
  How to optimize Internet Explorer?
  http://support.Microsoft.com/kb/936213
   
  b. If nothing works to solve the issue try reset Internet Explorer.
  How to reset Internet explorer:
  http://support.Microsoft.com/kb/923737
  Note: After resetting Internet explorer you will need to install the Adobe flash again.
  WARNING:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.
   
   
  I hope this helps.

• Whenever I want to connect to video call on Skype - I get this msg "a problem of breaking this program to stop working correctly, Windows will close the pragram and inform you is a solution available." pls help

  My problem is with SKype - I can connect just fine without webcam vidoe - but every time that I conect with video call - I am disconnected without any reason
  

  I tried to install the latest version of windows and Skype - check the status of my camera - it works and I was able to capture images.
  

  I don't know what I can do
  

  Please help - I live far from my family and it's the only way to communicate and see!

  Thank you

  
  

  
  

  
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi rozhanna,

  Try the steps mentioned in the link below and check if it works.
  https://support.Skype.com/FAQ/FA1267/I-set-up-video-but-it-doesn-t-work-what-s-wrong;JSESSIONID=E310AA4573FA528DA93B9439C47A1799? FromPage = Category

  It is also possible that some third party software installed on the computer are in conflict with the video call in Skype software.
  You can check if it works very well in a clean boot state.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click restart.

  If the previous step fails, you can try posting your question in the forums of Skype and check.
  http://Forum.Skype.com/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hauppauge TV tuner?

  How to configure the tuner Hauppauge TV's S-video input?   I connected to a DVD player, but there is no parameter input in Windows Media Player.

  Desktop HP Pavilion HPE h8-1141

  Hello

  Looks like you are trying to copy a DVD in the DVD player. The system does not work like that. You can use the capture feature to import/capture video through the S-Video input. Windows Movie Maker may be able to do it for you. Please follow this tutorial:

  http://support.Microsoft.com/kb/314575

  Kind regards.

• Problems to connect a HP dual TV Tuner digital video recorder

  I have a HP Pavilion dv6700 notebook PC (product # KC313UA #ABA) & s been with windows 7. At home, I have dish network (hopper w / a joey). I have a HP Dual TV Tuner / Digital Video Recorder that I'm trying to connect it to my laptop. I understand to make the cable plug. But nothing comes up on the screen of the laptop. The orange light of TV Tuners. I looked up in the PDF file for the tuner, that means that some software is not installed. I bought the Tuner second hand, so if it came with the software in the area of the orginal, I don't have it. I don't know if this the reason that my lapto is no TV Tuner or that I went step by step what says the PDF for HP TV Tuner, so I think it's a software problem. Maybe a download for usb. But Windows Media does not receive a sygnal of the tuner. Could you tell me where to find the downloads that I need. As long as it free I can get them. Thank you for your help.

  Hello

  Thanks for posting your query in Microsoft Community.

  a. What is the edition of Windows 7 installed in your system?

  have b. you been able to connect to the TV Tuner using before WMC ever?

  To receive a TV signal to your computer, the signal type must be supported by your TV and Media Center tuner hardware. After you have connected a compatible TV signal to your computer, you can set up the signal in Media Center to watch and record TV shows and movies. I suggest you refer to the following article for more information about TV tuners prior to use with Windows Media Center:

  What should I know before adding TV tuners to use with Windows Media Center?

  Also, see TV signals that are supported by Windows Media Center:

  TV signals that are supported by Windows Media Center

  Finally, check out the following link on how to set up a TV Signal in Windows Media Center:

  Set up a TV signal in Windows Media Center

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Hauppauge Tv Tuner does not

  Hi all

  I just got a new p6180 of HP (Vista 64-bit) with Tv Tuner Hauppauge 1800.  After fighting with the IR taken in the back (had to jiggle just to establish a connection) I started working on the DTV tuner.  I spent so many days to update drivers, re-installing windows media center (6.1.1000.18304) and so on with highly volatile results.  Here's the problem:

  Every once and awhile I am able to boot the computer and television live works in windows media center.  Then after the computer goes to sleep, or I close the victory Media Center and do any other job and then reopen WMC or restart the computer WMC says "Tv Signal No."  Then I spend another 4 + hours messing around with drivers, re install WMC, playing with the installation program, etc., before entering TV again.   Once I get the TV it works fine for a session or two and then it dies and it takes me hours to get it working again.   I can't understand why he died, and then I can't pin point what I did different for this work or why it stopped working.  I have not installed anything simply surfs the web or the computer went to sleep, and then he died.    I'm so frustrated.  I received via the digital signal from the air (OTA) for a few years now and never had any problems of signal (signal 80 strength +).  I also connected the cable to my tv to check a signal when WMC said there is no TV signal and he was always very well.

  Ideas before you go try and return the card or your computer?

  Thank you

  David

  Thanks for all the ideas.  I actually thought out if I turnned on the computer and then unplugged the card and plug it back it will work.  Which is until the computer could stop or go to sleep.  Then I would repeat the process to make it work again.  So I talked with HP after doing a bunch of diagnostics (motherboard and like) they decided to send me a new card tuner (same version Hauppage 1800).  I plugged a week ago and have not had a single problem since.

  All for a faulty card.

  Oh the connection works better now too.

  Thanks again for your ideas.

  David

• Guide for the installation of an HP ENVY 700-230qe CTO Desktop TV tuner card

  Hello

  I am trying to install a TV tuner (Hauppauge WinTV-HVR-2250 1213) to my HP ENVY 700-230qe CTO desktop PC. Can you please give me the guide installation and procedure for the TV tuner card? Thank you.

  Here's a guide to help you with the installation of an expansion card or of the video card in the computer.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• Media Center crashes during video playback of need to hard reboot.

  Hi, any help would be greatly appreciated as this has been driving me crazy for several days of attempted troubleshooting, Googling, try many things to fix it... first of all let me apologize in advance for the length of my post but I wanted to give as much information as possible to help anyone trying to rule out things...!

  OK, so the problem...

  I installed Windows 7 Ultimate 32 bit as a clean install on my HTPC, after the first do a complete 1 & 0 format of the hard drive that had previously installed Vista Home Premium, installation went well and I proceeded to install all updates to Windows, and then update drivers for all my hardware.

  The system is used only as a HTPC, it's my only TV and video playback device, (so reliability is essential for me) and it is connected to a defintion of Sony, 44 "Widescreen Rear Projection TV Standard, via S-video, with audio goes to a system DD/DTS 5.1 Surround Sound Speaker Logitech z5500, via a sound card by using the optical cable (specifications of the complete system below).  The system worked flawlessly more of one year using Vista SP1 32 - bit, until I upgraded to Windows 7 Ultimate on the hardware configuration identical.

  Since installing Windows 7, it worked fine for the first week, not a single problem, I am housebound are disabled so that the system is in continuous service 24/7 and he had no problems in the first 10 days, however all of a sudden I'm getting now random freezes requiring a hard reset , but it occurs during video playback of any of my 3 hard disks, or when you try to play a DVD in Media Center. Which led me to think it is associated video (problem of driver or hardware fault) card, disc or HARD associated.

  Frost can occur sometimes, after a few minutes of reading, or sometimes after a few hours, requiring a restart of the hard to get the sytem to answer.

  Reading of the TV via the TV Tuner card is not affected, its only when playing of stored content (MPEG2, h264 .mkv .avi files or DVD) are all media SD HD and all played fine for the first few days.

  Intermittent freezes occurring could block the system completely freeze the image and audio and all activities, nothing would work at all, I tried windwos keyboard, ctrl alt del, nothing at all, to do a reboot hard to recover the system, it can then be either minutes or sometimes an hour before the same thing happens again. I tried to use different video files in the case of the corruption of files, different DVD to exclude damaged disks, same result.

  System includes:

  1. Map - mother ASUS M3A32 - MVP Dlx, Socket AM2 +, 790FX/SB600 chipset, BIOS v.2003
  2. Operating system - Windows 7 complete edition 32-bit Retail (clean install, all the Windows installed updates)
  3. CPU : AMD Phenom 9950 Quad Core @ 2.6 Ghz (stock)
  4. RAM - 4 GB Patriot Extreme Performance DDR2-800 5-5-5-15 2T
  5. Graphics card - ASUS Nvidia 8800GTS @ settings inventory 320Mo
  6. Sound card - card of ASUS Xonar D2X PCI-E
  7. Card TV Tuner - Hauppauge PCI-E WIN - TV Nova S more DVB - S directly connected to the flat outer of satellite, with remote control IR IRBlaster
  8. Player - optics Sony/NEC Optiarc DVD - RW Labelflash
  9. HARD drive 1 - (Startup disk) Samsung Spinpoint 160 GB SATA II
  10. HARD drive 2 - (Only for TV recordings) Hitachi 160 GB SATA II
  11. HARD drive 3 - (Storage media) Maxtor 1 TB SATA II
  12. Netwrok adapter- EDIMAX PCI 54 g Wireless Adapter - uses a RALINK driver
  13. Keyboard1 - Logitech Dinovo Mini Bluetooth wireless keyboard
  14. Keyboard & mouse 2 - Logitech MX3200 wireless mouse/keyboard combo
  15. Speakers - Logitech Z5500 5.1 Digital Surround Sound via Toslink optical cable connected to the ASUS Xonar Sound Card S/PDIF optical

  All the material above has had pilots upated since the sites of respective manufacturers, including BIOS of motherboard, chipset, graphics card, network card, sound card, card TV, keyboard (Logitech Setpoint) etc... etc...

  Initial added after Clean install software:

  1. Internet Security - Comodo Firewall v.3.13.126709.581 (updated daily since installed)
  2. Antivirus - Alwil Avast Professional 4.8 v (update daily & daily analysis of all local drives)
  3. Browsers: Firefox v. 3.5, Google Chrome
  4. MCEBuddy v.1.1 - for automated video Conversion of MCE .wtv smaller file size .avi TV recordings

  All of the above software has been installed by using the latest available versions downloaded from the manufactuer sites, which claim to support Windows 7 and all have been updated regularly since its installation.

  I have tried many of the suggestions I've seen posted to try to solve this problem, including:

  1. Uninstalling and reinstalling Media Center and WMP
  2. Disabling subtitles in Media Center
  3. Disable unused mobo onboard devices in the BIOS
  4. Update BIOS
  5. Updated all drivers
  6. Disabling Control Panel Nvidia PhysX
  7. Disabling the Enhanced Sound features for reading devices
  8. Run CCRegistry cleaner
  9. Run many Virus scans nomral mode and safe - no problems found
  10. Don't run the Checkdisk on all HARD drives - no problems found
  11. Run the SeaTools Diagnostic tools for HARD drives - all disks HARD discover OK
  12. Tried playing files AVI of HDD separated to avoid a HARD drive problem - same problem occurs on all readers
  13. I tried change graphics card for an ATI HD4850 with the latest ATI drivers - same problem.
  14. Tried to change the audio output S/PDIF instead of Xonar Soundcard onboard - same problem occurs
  15. Tried the Windows 7 repair facility - problem persists.
  16. Tried to uninstall all updates of Windows -same problem
  17. I tried the system restore to before the occurrence of the problem started - no help
  18. tried to re-downlaoding all hardware drivers updated and re - install in the case of a corrupt driver download - no chance even problem

  Essentially none of the abvoe helped to solve this problem, and it becomes really frustrating to have to restart the PC again and again trying to watch a recorded video file or DVD.

  After remove all the above I can only assume that it is a problem with Windows 7, needing a fix of the millisecond.  At least I think that I've exhausted everything I can try... ???

  With what is my HTPC, if I can't perform reliably, I have to reinstall Vista, Vista was not the best OS, but at least it was reliable for me in terms of my HTPC.

  I was really eager to get Windows 7, I used the RTM version on my netbook for some time before I made the decision to purchase the full retail version for my HTPC, and never had any of these problems with my installation of netbook that I used for playback of media files from an external USB HDD.  So I'm really disappointed to have these problems after doing all that I could to make sure that Windows 7 would work OK.

  If anyone can give me any suggestions of what I can try, anythign I can too watching, or if someone has hada similar problem and found a solution for him... Please, please, post more details, because I am really at my wits end now and have to resort to watch the recordings on a 10.2 "screen of my netbook with some speakers of the small laptop usb, after spending so much money on my system and surround sound Setup HTPC, its devastating to think that I'll have to go back to Vista...

  Absoultely ANY suggestions would be appreciated...

  Thanks in advance for any help and once again, I'm sorry for the length of the post, if there is more information needed I've not provided above, please let me know and I will try to publish as soon as POSSIBLE...

  After the forum of scouring and reding of countless discussions, it seems, there is some sort of problem with Media Network Sharing tha could be the cause of this problem, as many people have reported that disabling wmpnetwk.exe in the Services.msc solves the problem.

  It's not an ideal solution for me, as I have a HTPC in the room that I play media from the main HTPC downstairs and all the hype MS seemed to suggest that Win 7 is it is much easier to achieve, and has been one of the main points of sale used in one of their commercials for the operating system.

  This my MS you need to pay attention to this problem and work towards a solution and allow users to know when the solution has been provided, probably have a service that must be disabled to let the operating system work reliably is quite counterproductive.

  Nobody seems to answer my post above with other suggestions and wmpnetwork.exe disable workaround was published last November, all the while still there is no permanent solution...?

  EDIT: Just to confirm this wmnetwork.exe Netwrok disabling media sharing in the services, as well as disabling the media streaming in the Netwrok Sharing Center > advanced sharing Options, solved the constant crashes for me.

  So all the MS speak of 3rd party drivers for the cards video and other material or material defects are to blame, it's total BS, the only problem is to do with Windows and Windows Media Sharing, lets hope, they decide to do something to fight it... !!