Similar Questions

• Want to 700-311: question of video upgrade: envy 700-311

  I don't have a problem with my computer at the moment, I just want to avoid a.  I want to improve the video on my computer from the integrated Intel HD Graphics integrated 4600 video, that he arrived with a dedicated card GTX750Ti.  I have already improved the PS to a Bronze of 850W, so power should not be a problem.  I have an available PCIe X 16 slot (Gen 3.0).   I can't find a clear description (or YouTube video) upgrade process, but I think it must be pretty starightforward.   Do I have to (1) disable the existing onboard video (2) close (3) install new video card, (4) reattach connections, (5) lights up, installation drivers (6), (7) get a video signal, (8) declare victory and (9) to order a pizza?  That's what I think I've read, but it is not supposed kill my video device available, install another device, then the up... rear how to fire computer could monitor possibly get a signal?  I'm afraid that if I do this bad I won't be able to get a signal to my monitor, and no video, I have a quite expensive boat anchor.  I really don't want to take it to a tech for what should be a simple installation, but maybe I should.  Prior to that, is there any step by step clear directions for this upgrade?  Thank you very much.

  Thanks for the reply Jay fast!  Clear instructions, I can follow with confidence.

  Best regards

  Ubu216

• Windows 7 Pro upgrade Activation issue.

  Windows 7 Pro upgrade Activation issue. I bought a real upgrade of Windows 7 Pro 64 bit. In reading, there is no way I could actually update my current installation of XP and keep all the settings, I decided to just reformat my hard drive and install windows 7 as a custom install fees. Now, I can't activate Windows 7 because it claims that I do not have a version of windows installed on this hard drive. Is it possible (armed with my XP and Windows 7 product keys) I can activate my software? Or should I go through the hassle to format my drive again, stick XP on it simply to crush it with Windows 7 so I can activate it? Feels like a bit of an oversight for XP to 7 plants of valuation. Thanks for any help you can offer!

  N.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Inspiron 530 video upgrade question card

  I have a Dell Inspiron 530 has. It has all the pieces of stock right now, but I'll put a core 2 duo E7400 in there when it happens. The next issue is that I need a video card for it. What is the best card that can be put in it without an upgrade to the PSU, yet? The power supply will not be upgraded for awhile. The motherboard is the G33M02, not 03 version version. He seems to have the 1.0.15 installed BIOS version, I will update as soon as I have the chance. It has not always been connected even to install an operating system - came empty (just bought from a wholesaler of machines of companies).

  Edit - forgot the bios information.

  Forget the 8400 GS.  This card is too old and has little to offer with regard to the performance of the game.  The HD 6450 or 610 GT are the best cards. The minimum requirement to play Mechwarrior online is the HD 6450 and the GT 610 offers similar performance.  If you want something better without too much spending, I'd recommend getting the HD 6570 HERE.  This card would have much better performance of game at the expense of others.

• Capacity issue series MCU 4500

  Hello

  I need to ask for a solution for a video conference 15 of the participant.  The meeting is between the main site of customers (1 standalone codec c40) and 14 others on remote sites.  Given that the other sites have no infrastructure my plan was mainly using functionality MCU Conferenceme to invite all other participants.

  I was also counting the c40 register with access to the builtin H323 MCU controller.  Which would be ok?

  1. based on the data sheets, it seems that Conferenceme is limited to 12.  Is this correct?  15 party conference would not be reached here.  All the suggestions here

  2. I could involve some clients Movi.  Now, I have to add a starter of VCS originally C40 + MCU 4501

  Also for the 4501 with 6 to 12 HD Port Option (SD 12 to 24 Ports). What is once the Conference Expands to 12, it will be downrated from HD to SD for all participants?

  Finally what bandwidth up/down would you recommend for this conference say 15 part to the quality of the SD?

  My apologies for the bundle.

  HI Ricardo,

  Since you need 15 participants I would say ither to buy 6-12 HD functionality, in order to double the capacity or

  go for a physical upgrade to a MCU 4510 (with 20 dedicated ports of capacity for video / audio 20 / 20 content)

  The SD / HD mode is a global setting, you can configure the appliance to use only SD or ports only HD, you can not mix (for ex you can not use 3 HD and SD 6-port, you can either use 6 HD or SD 12 (or double the capacity with upgrade key))

  The Porter built in of the MCU can handle a maximum 25 points of endpoint recorded, but it has very basic functionality, I highly recommend using a VCS like dedicated GK and record the MCUS and endpoints of the VCS

  Regarding bandwidth, I'd go for at least 768 Kbps (you can use 512 however more body weight, best quality)

  I hope this helps

  Cristian

• Video upgrade - business multi-screen on Optiplex 755 MT

  People,

  Please, let me share my upgrade of success a good end of the Dell Optiplex 755 MT for multi-monitor lease.

  If you are looking to use a great system for companies, but want to add multiple monitors (which is fantastic for productivity), so this solution might be nice for you.  And do graphics multi-monitor solution that works is easy and difficult at the same time!   It's easy if all the material is known to work together!  This note is therefore, on this topic.

  * With the help of ATI over-pants 2450 in 16th housing PCI Express.

  * Four monitors (via VGA or DVI adapters included) OVER the motherboard video still works!

  * Updated the BIOS to the most recent.

  * Note that this card works PCI 2.0, and it works in what is apparently a PCIe 1 location. on the MOBO 755 0 a.  A 2.1 card may not work.

  * This is for businesses and all five monitors work fine now, even with YouTube.  This is not intended as a game environment.

  * There are a few things to try in BIOS in terms of parameters - for a while, there was a mistake of memory and the thing wouldn't start - it took a little time to understand the exact configuration of he.

  * WIndows 7 is the operating system used - and Windows Aero works.

  * I'm not long seen accidents associated with old Jaton NVidia PCI cards that we used previously.

  * The physical slot size are fine.

  * Consumption looks very good.

  * Cost of ITX Canada was about $250 more shipping, tax etc.

  * Here's the Sapphire version of the AMD ATI card, which is very good.

  * The AMD reference number is 100-505531.

  Five monitors are not identical (three different geometries and two sellers)

  * Device Manager lists the latest AMD video drivers for this card as installed and work - I am not quite clear if the drivers have been installed from the download, or later.

  Actual installation was required for their persistence and a little hairy.  When I reboot, I'll see all noting the exact BIOS settings.

  * The system crashed not once now, in a week of constant availability, including browsers open 20 tablets or more periods and use of the physical memory of 80%.

  * System 6 GB of RAM, running 64-bit and BIOS A22.

  Good luck.

  AMD 100-505531 over-pants 2450

  http://www.Newegg.com/product/product.aspx?item=N82E16814195083

  It comes with 2 connectors DUAL DMS.

  

• Video upgrade to asus geforce gt430

  Hi, I have a HP p6589es with a nvidia g210 512 MB ddr2. I'm planning on upgrading to an asus geforce gt430 1 GB ddr3 and wanted to ensure that this card is compatible with my system (slots pci and all the rest). Also if there are guides for installing the video card that could be useful. Writing of the Spain. Thank you.

  Welcome to the HP Forum!

  mreaj wrote:

  Hi, I have a HP p6589es with a nvidia g210 512 MB ddr2. I'm planning on upgrading to an asus geforce gt430 1 GB ddr3 and wanted to ensure that this card is compatible with my system (slots pci and all the rest). Also if there are guides for installing the video card that could be useful. Writing of the Spain. Thank you.

  The card cooling solution will focus on the PCIe - x 1 slot and slot Connector1 beside him. GT430 requirements 1 GB ddr3 card for power is the same as your currently installed card. If your current power supply should be sufficient.

  This document with a certain animation is for the upgrade of the processor, but it shows how to open the case.

  The following image is of the actual provision of your motherboard. I've highlighted the PCIe slot lock. Push it gently with your finger the CPU while raising the video card up to remove the card.

  

  Kind regards
  ERICO

• upgrade performance issues - see my profile

  Hello world

  I have suffered from some performance issues and would like to hear comments on my current set in place.

  USE

  I use InDesign, Photoshop and Illustrator also throughout the day.

  SETUP

  -Intel i7 - 3770K @ 3, 5 GHz

  -16 GB Crucial RAM

  -NVIDIA GeForce GTX 660

  -WDC WD1000DHTZ-04N21V0 1 to 10 k RPM 64 MB cache SATA drive at 6 GB/s (internal)

  I have not yet attributed this player for something specific

  -WDC WD5000HHTZ-04N21V1 500 GB 10 k RPM 64 MB Cache SATA drive with 6 GB/s (internal)

  It's my drive disk OS, applications, files of work and scratch

  -Software: Win7, WAA CC (not this latest version, there were issues, we had to go back to the previous version).

  WEAKNESSES

  1 RAM is small, I put at level 32 GB this week.

  2. video card is pretty low, but I rarely use first so maybe ok for now?

  3 discs: do you think that improving an SSD for OS and Adobe CC?

  I look forward to your opinions. Thanks in advance!

  Thanks for the information, Mohammad,

  What would you suggest for my existing 10 k TPM?

  I am considering a 256 GB SSD for my OS and applications. But think my scratch disk 500 GB and the 1 TB for my working files.

  Your thoughts?

• Video upgrade for a DELL Dimension 4600

  I have a Dell Dimension 4600, Pentium 4 CPU @ 2.66 GHz, 512 MB of RAM and a NVidia GeForce 5200 graphics card.  Any recommendation on whether or not I can upgrade the video card?  If so, which one should I get.

  
  

• Classroom for a course of Book 12 video make animation issues

  I was able to get through this book without a right to issue up to this point.

  I'm trying to export a keyframe, long of 3 seconds, the animation of 15 images/s of a postcard 3D revolving around 2 times 3.

  First I tried with the parameters of books:

  H.264 compression, 15 frames per second, each 24 frames, frame faster reorganization, average quality on the compressor with code set.

  The size of the image to display 700px 700px (in photoshop, it's actually 1500 x 1500).

  The video export window rises and goes from zero to 50 percent in less than a second, but it crashes then and I have not yet be pretty patient so that it completes (it went for 30 minutes with no progress).

  I thought maybe it's a problem with H.264 compression, so I tried an AVI compression with similar parameters (average size of quality 700 x 700).

  Unfortunately, it does the same thing.

  I installed from the Apple quicktime site and just installed it yesterday (after that I discovered that the PS would video rendering without him) is the latest version.

  I have a system very high-end (the six core AMD 1090 t, 16 GB of RAM, dual radeon 5830 crossfire graphics cards).

  I have looked around forums and don't see any similar questions just people do not receive the quality/results they would like to video rendering.

  I also do not get a preview in the dialog box export render, which leads me to believe I'm missing codecs or something.

  I make animation in Blender quite frequently without any problems, so it's a mystery to me why the PS has problems.

  Any help is welcome.

  EDIT:

  When I play the animation in photoshop using the timeline panel I move blue grids covering around the workspace and the animation doesn't really play.  I noticed these blue grids also when I made a cross section of a 3D object in the first part of the book.

  I can hit ESC or left-click in the workspace and the timeline will advance to the next section.

  Select the 3D layer, go to the 3D palette, set the quality of rendering in the context menu.

• VGC-LV290J/B video card driver issues

  I have a LV290J/B VGC and he likes most of the time. However I encountered a problem. The video card which is a nvidia 9600M GT has a pilot who is a few years old.

  I can't update with a newer version even if on the nvidia site, I can find an update. Whenever I try to update the driver it says that it is up-to-date and will refresh not or say update fails.

  It's frustrating because the games I want to play: starcraft 2 world of warcraft and fallout new vegas receive errors caused by the graphics being out-of-date driver.

  Is there a solution or am I stuck with a $ 2000 million computer. With no solution im afraid I'll never buy another sony computer ever.

  There is a new driver update that might work for your machine, if the hardware ID is the same, but you must have Windows 7 or Vista 64-bit.

• HP Envy: video upgrade HP Envy card

  This PC is model # 700-406, product # J4W42AA #ABA, serial No. [removed personal information]. I'm looking for a great video card for accommodation of video card that I hope is inside this machine so I can take some of the workload of the CPU, which I believe is in reality an APU. What makes exact and models of video cards are compatible and could help me do this?

  geercom wrote:
  

  According to the specs online for a HP Envy with this product #, the voltage of the power supply specifications are

  Range of nominal input voltage: 200-240 v/3A (50-60 Hz)

  What specific features do I need to see on the graphic card compatible for the power supply be able to support it?

  It should list the volts/amps for 12 volt rail, it's what is needed to feed a GPU is not enough and the GPU will have problems running. If it does not show one, you must contact the HP support for additional details on POWER supply.

• Upgrade memory issues with Satellite P200 - 10 c

  I have upgraded to 4 GB as from Toshiba Web site says it supports 4GB. In the bios, I only see 3070 MB and Windows 7 64 - bit says (3.00 GB RAM) 4.00 GB RAM usable.

  Why?
  In Task manager is also said 3070MB of memory total.

  Hello

  4 GB of RAM should be possible.
  The laptop seems to support the Mobile Intel® 945 PM Express Chipset and according to the Intel Ark page, 4 GB of RAM are supported by 945 PM
  http://Ark.Intel.com/products/chipsets/22817

  I recommend to check the advanced startup options:
  1. Click Start, in the search bar type msconfig and press to enter.
  2. System Configuration window appears on the screen.
  3. click on the tab named "boot".
  4. click on "Advanced Options" and uncheck the box 'memory Maximum.
  5. now restart again and check the available memory.

• English installed W2K and the Spanish XP upgrade compatibility issues

  Bought the package upgrade XP here in Spain. Impossible to install on the PC with installed English Windows 2000. No indication on the box or elsewhere in the package that the upgrade is specific to a Spanish version of W2K.

  Error message saying incorrect language version.

  Is there a work around? If this isn't the case, MS should make the requirement clear on the packaging.

  Hello

  ·        Which edition of Windows 2000 you are using?

  Unfortunately, you cannot upgrade from one language module to another, you may need to perform a clean system installation if you want the Spanish version of the operating system. You cannot go directly from English to Spanish.

  I suggest you to check the upgrade paths

  Taken Windows XP supported upgrade paths

  http://support.Microsoft.com/kb/292607

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows 7 upgrade advisor issue

  I recently downloaded the Windows 7 Upgrade Advisor and it tells me I need 1 question to the address which has the version of adobe shockwave player 10.2.0.023. I tried to download the new version, but it still doesn't work. What should I do?

  http://www.filehippo.com/download_shockwave/