View client authentication failed

Similar Questions

• Content Viewer Login authentication failed

  Hello

  Anyone know how to fix this?  I'm registered a new Adobe ID and tried to connect through the viewer of clouds but got the authentication error message.

  Hi Xibist71996702,

  I see that you have an adobe under the same email account as with the forums.

  Using this Adobe ID, you can connect to Adobe: Creative, marketing management solutions and document and access your adobe account.

  Let us know if you are looking for other information!

• view client authentication

  Hi all

  We have completed the Security server publishing, but the authentication page he stops, joined the screenshot. Any idea, please help

  Everything from the inside of the network works fine. We have opened the ports 443 and 4172

  

  Hello Pradeep,

  Are you talking about these settings? http://KB.VMware.com/kb/1036208

• Authentication failed in the content viewer

  I have a client who cannot log in to the display of the content with its Adobe I.D. so he can't see the project that I have developed for him. When you connect, it gets the message "Authentication failed" dreaded. He used the viewer of content in the past without problem, can connect to Adobe.com, is connected to the Internet, and his account is verified. I even changed his account email address so it would be re - check, but nothing helped. I know that this subject has been discussed here with varying results, but nothing has solved the problem. I tried his account information on my iPad with the same results, but my account works fine. I chatted online and on the phone with technical support, but it was absolutely worthless. He tried not to make a new account, but really, that is not acceptable and does not bode well for a lot of confidence in the product. Thank you.

  Bil

  There is a known problem affecting some customers. Can you send me a private message with the Adobe ID of the person having this problem and I will have a product support person to investigate and solve the problem (there is no they can do I can't for this problem)

  Neil

• How is the View Client to connect to the server has failed?

  Hello

  I have already set up the laboratory of Horizon view. But when I was about to connect to VM via View Client, an error message appeared.

  Pls check the photos attached. It seems that view Client connected to the server, but the recovery failed sources to the broker. And the average while servers introduced a healthy state in administrator mode.

  Step:

  1. launch View Client and login entry server IP address.

  2. a box will appear that him want to make sure that the server cannot be trusted. Then click on "continue".

  3. Enter the credentials, and then click "connect" button

  4. the error: "error: invalid server URL.

  What happened there? I have worked all day, still can not understand.

  No matter which help out me? Thank you.

  Step 1:

  

  Step 2:

  

  Step 3:

  

  Don't know if "_" is valid in a FULL domain name, try something else which corresponds to the period of investigation.

  Linjo

• Windows XP SP3 with view Client 5.1: unable to connect: discovers the connection connection to the server has failed

  Hi guys,.

  I need help.  I have a problem with my opinion of Client on a Windows XP SP3 computer.  When I click on connect, I get the following message immediately:

  "Failed to connect to the view connection server. Verify that the server connection mode address and network settings are correct. »

  A few details:

  My client's IP address is on the same subnet as the view connection server

  There is no firewall and DNS solves the login server see very well.  Here is the output of my customer's orders

  C:\ > nslookup X.X.X.172

  < resolves very well >

  C:\ > nslookup dd - view.viewdomain.com

  < resolves very well >

  C:\ > nslookup dd-notice

  < resolves very well >

  C:\ > tracert X.X.X.172

  < works great >

  If I open a browser on the XP workstation which is a failure, I can go to https://dd-view.viewdomain.com.  It displays the page that I need to connect with View Client. What do I think, so this should check the connectivity between the two.

  I've seen customer 5.1.0 build-704644 installed on my Windows XP SP3 client computer

  My connection to the server is running 5.1.1 build-799444 and is configured with a pool of offices 25 clone related with SSL active

  LAST IMPORTANT NOTE: I have the same version of the Client view (5.1.0 build-704644) installed on another Windows 7 workstation on the same subnet and it connects to my view connection server office pool very well.

  I tried to install the three versions of the customer view of this system of XP SP3 including the latest version, when the connection after installation, they all fail the same way. My body needs to function. The client machines can not move to something more recent to Windows XP SP3 because I am not the administrator for them.

  Any ideas?  Is this a bug or is Windows XP SP3 just not supported with view 5.1?

  VR,

  Brian Whyte

  Political of McAffee HBSS blocked 443 attempts out of the customer to view.

  The difference is that the Windows 7 machine that worked was becoming another policy HBSS applied to what was not blocking attempts.

• Adobe content viewer authentication fails. Help, please!

  my content adobe Viewer authentication fails. I can access acrobat.com. I tried to reinstall the program and create a new account but still not in the same way. I m using ipad. What wrong?

  
  

  Help, please
  

  Go to http://digitalpublishing.acrobat.com and sign in with your credentials, and then agree to the terms of use.

  Neil

• SafeNet Web App using stored on Rainbow iKey 2032 PKI authentication fails

  ESX 5.1

  5.2 horizon view

  Client OS is Stratodesk NoTouch Ubuntu Linux

  Connected to the virtual desktop using PCoIP using Linux Horizon View Client 2.3.0 with USB redirection

  Virtual desktop is Windows 7 Enterprise 64-bit with SafeNet 8.0 SP2 (8.0.186.0) Client authentication and Rainbow iKey 2032 64-bit version of the driver 1.21.0.5

  The key turns in the windows device manager and SafeNet client can read the info/certificate on the key, but when you use Internet Explorer to visit a Web site that requires authentication PKI, you are prompted to choose the certificate from the key but you're not invited to the spindle and site authentication fails.

  Anyone have any ideas on how to get this working?

  After the announcement, I had the idea to try the 64-bit version of Internet Explorer, and that's the ticket!

• Authentication Failed: the Proxy to fail

  What's the matter, authentication fails and the message is this:

  Authentication Failed: the Proxy to fail

  Thank you

  Go to network settings > under 'Groups of network devices' click "(non attribué)" "

  Under servers "(Not Assigned) AAA", note the name of the IP address of your machine, which can be confirmed from the DOS command prompt "

  using the command "ipconfig/all".

  Then, return to the Network Configuration > under "Distribution of Proxy table", click on "(default)".

  And make sure you name server entry AAA for your machine is in the column 'Forward To '. If it isn't, then move your entry of the column machines and ensure that all other entry is under "AAA servers. Press 'submit + Restart.

  Finally, try authenticate a client bit against this ACS server.

  Kind regards

  Prem

• Authentication failed-2008 NPS of VPN from Cisco IOS

  I'm trying to authenticate VPN connections to a Windows 2008 Server NPS Radius server.

  Local authentication works very well.

  This is the cisco configs:

  AAA new-model
  AAA authentication login default local
  AAA authentication login VPNauth local radius group
  local AAA VPNgroup authorization network
  AAA - the id of the joint session

  radius of the IP source-interface Loopback0
  RADIUS-server host x.x.x.x auth-port 1645 acct-port 1646 button 7 xxxx

  list of authentication of card crypto VPNMAP customer VPNauth
  card crypto VPNMAP VPNgroup isakmp authorization list
  crypto card for the VPNMAP client configuration address respond
  map VPNMAP 10-isakmp ipsec crypto dynamic dynmap
  ...

  ... other cryptographic controls

  This is the section of the NPS logs:

  Information about authentication:
  Connection request policy name: VPN
  The network policy name: -.
  Authentication provider: Windows
  Authentication server: x.x.x.x
  Authentication type: PAP
  EAP type: -.
  Identifier for account: -.
  Results of logging: Accounting Information was written in the local log file.
  Reason code: 16
  Reason: Authentication failed due to incompatibility of user credentials. The provided username is not mapped to an existing user account or the password is incorrect.

  I have PAP enabled on network connection request policies /...

  I'm stuck

  Help, please

  You can run a "nipple aaa"command to see if the user can be authenticated successfully?"

  I think this might be a configuration problem on the NPS server. You can google it. Here is one that I have found, refer to the position of "irishHam".

  http://social.technet.Microsoft.com/forums/en-us/winserverNIS/thread/bfbbbae4-A280-4b3f-B214-02867b7d33e3

• Need to implement the alternative login if Kerberos authentication fails.

  Need to implement the alternative login if Kerberos authentication fails.

  In our case, we are sure that Kerberos will fail because we allow agencies 'B' to access this application of reliable source.

  Kerberos fails and the application should display the name of user and password page and then authenticate.

  In the web.xml file changed auth method basic with Kerberos, set up successfully.

  'A' agency users can make successful Kerberos SSO. But when an agency "B" SSO access will fail with 401 and the application appears pop base with the name of user and password fields.

  When the user provides the details and present application returns 401 again. not able to go beyond these steps.

  Please provide your inputs.

  can you please enable security ATN debug and share the newspapers?

  Who will be telll us why the authentication will fail.

  Replace the CLIENT-CERT, BASIC authentication method in the web.xml and try.

  What is the default authenticator control indicator? I think that its just / optional.

  -Faisal

• Problem with USB Redirection on Horizon View Client v2.3.0 for Linux

  I had a problem on the USB Redirection when connecting to the Server of VMware View by Horizon View Client v2.3.0.

  1. Here is our configuration:
     1. Server:
        1. Horizon View Server 5.5 + Windows 7 Enterprise VDI
     2. Client:
        1. Thin client (TI ARM platform - 8148)
        2. Horizon View Client v2. 3 for Linux
        3. USB Flash: Kingston 8 GB USB 2.0, FAT32
  2. The issue: USB flash can not redirect to VDI successfully.
  3. Some status on our test:
  • The USB is plugged USB port on workstation before connecting to Horizon view Server 5.5
  • Light client can recognize and use USB flash to the local site.
  • When we connect to VDI, we can see the USB driver is responsible for research and installation, but windows VDI() reports fail to install the USB driver finally. It seems that VDI trying to acknowledge the failure of USB flash but finally.
  • It is held even Let's restart the workstation and VDI.
  • Attached file is the log of the Horizon of the VMware View Client.

  
  All welcomed to this topic?

  Unfortunately the newspapers show much... (note: they do not contain client-side logs)

  one thing I thought well... since he is a computer thinClient - we have seen the questions that manufacturers computer thinClient some of their own 'management' software install on the client. He often tries to do things with usb devices (maybe try to share them between a receiver client citrix application and view client app or maybe just there is a citrix receiver application installed too). In our experience, we've seen these apps interfere between them as they try to hang the bottom of usb devices down into the kernel.

  as such, could you try stop any 3rd party services - either citrix or your provider of thin client and then try again.

  If the problem persists, can you be sure to also collect these log files from the computer thinclient:

  Windows client

  • %ProgramData%\VMware\VDM\logs\debug-*.txt
    AND
  • C:\Windows\Temp\vmware-SYSTEM\vmware-usbarb-*.log

  Linux client

  • default /tmp/vmware-root/VMware-view-Usbd-*.log
    AND
  • / Library/Logs/VMware/vmware-usbarbitrator -.log

  for reference, the Agent-side usb connects:

  • %ProgramData%\VMware\VDM\logs\debug-*.txt

  see you soon

  peterB

• PCoIP View Client and built-in customer Teradici

  Just a quick question.

  Is the client for Windows (which contains an option PCoIP) identical using the built-in Teradici PCoIP customer?

  Specifically, if I conducted tests using view Client on Windows XP, I can be reasonably certain that if I went with a TC5 DevonIT or Dell FX100 the embedded Teradici PCoIP would operate the same?

  Thank you

  There are two ways to render the elements of a composition of the bureau. On the host side and rendered client-side rendering. We can say that those, Flash, WMV, H.264, MPEG etc are more demanding and difficult to make and deliver across a network components. On a PC, when you play this type of content, you will notice the CPU or spikes runs at high usage during playback that is working to decode and display the video.

  With the rendering side host you must have a VERY good encoder to manage videos and do it as efficiently as possible through a network. Historically, this has been a problem for server based computing solutions.

  Rendered on the client side or ROR then renders the native content on the client side. Graphics commands or content are sent between the host and the client, and the client is rendering and the display of the content. With video overlays use then... think of it as your weather man standing in front of a green screen.

  He has pro on and con everyone.

  ROR requires customer support capacity, has CODECS on the client. It also requires that the drive supports the media type. The advantage is that it requires less host resources, because the client is used. The disadvantages are the limited player support, management more on the client and the limited media are supported.

  Made on the host side just works. Any CODEC will work, any player will work and any client can be used. The benefits are, any client can be used, less complexity, media format more broad support, assistance to larger players, less management on the client endpoint. The downside is that it requires more resources on the side of the host which can lead to the consolidation of weak reports how often media is used.

  VMware View with PCoIP supports rendering both MMR and accelerate

  Customer discovered with PCoIP and RDP for windows supports ROR

  Customer discovered with PCoIP and RDP for Linux supports the ROR with RDP and support for ROR with PCoIP is coming

  The two clients support rendering with PCoIP host-side. If the right player, media, client and guest OS combination serves ROR is tried in the first place, if this fails host-side rendering is used.

  Client PCoIP zero do not support ROR so rendering on the host side is used.

  A list of the types of media supported and players are in the view Administrator Guide.

  WP

• OSB: [Security: 090302] authentication failed: user... Jim

  Hi all
  
  I'm trying to set up my OSB so I can protect a Web service by using certificates.
  
  The problem is that when I add the security policies at the service of my proxy, I get the following error when you test the service proxy (although the sbconsole):
  
  Impossible to derive the token.javax.security.auth.login.FailedLoginException topic: [Security: 090304] authentication failed: user - Cert Test javax.security.auth.login.FailedLoginException company: [Security: 090302] authentication failed: user - Cert denied test company
  
  I used a few other posts in this forum to implement my wls and osb. For example How to call the service https OSB and how the CERT CN to the principal of ejb SessionContext?
  
  This means that I put the keys, ssl, defaultAuthenticator, defaultIdentityAsserter, enabled X.509 file, set suppliers etc.
  
  My key file contains 2 sets of key public and private keys and therefore should also be ok.
  
  Has anyone else had the same error after configuring their servers of wls and osb?
  
  Thank you
  
  William

  You have configured the default user name Mapper in the affirmation of identity by default to use the certificate CN as the mapped user, [Company - Cert Test is the CN name in the certificate] you will also need to create a user weblogic with the same name as the attribute certificate mapped... Check if you have done the steps as shown here:
  Re: How the proxy service can get the client certificate in Oracle Service Bus

• MAc OS 10.8.3 proxy authentication failed

  I use firefox 21.0 in Mac os 10.8.3.We use the proxy server for the navigation. While browsing the internet firefox invites proxy username and password, after entering the user name and password it shows the proxy authentication failed, a new series of required authentication. The same username and pssword in works well in safari in the same book of mac.

  Help, please

  Dear Dawid,

  Thanks for your valuable response.

  Thank you very much