View Dell's Intelligent turn off on Inspiron 3137

Similar Questions

• Keyboard Dell place 11 turns off the shelf?

  Hello, I had some problems with the keyboard travel with built-in battery, that I bought for my Dell place 11. I noticed that when I connect it to my tablet, it will stop just my Tablet and I will lose everything I was working on. I also noticed that when the keyboard is connected, it will be to randomly in the middle of me using my Tablet close.

  is it just a faulty keyboard or is it a problem that I can fix it? Help would be greatly appreciated.

  kcwilsonii

  It was the keyboard docking station in my case

  The pins seem to all be at the same altitude and if the connection of mooring to the keyboard is not enough tightened, then the Tablet shorts on. I went through 2 replacement keyboards (like backup battery) until I got one that worked.

  They need to make these keyboards with pins together at the same altitude to avoid the problem and should run on the tightening of the connection of mooring as it also seems a little on the loose side

  The pins of must not all be the same height - this is normal.

• Computer Dell laptop XPS L421x turns off randomly

  My battery is fully charged, the laptop rather new stops just at random.  I don't receive any message until the computer turns off.  When I turn on the back, he asks if I boot safe mode or start the computer normally. (still no error message)

  I did not bring any changes on the computer, I mainly use Word, Excel, PowerPoint, Outlook and Internet Explorer.

  Any ideas?  I think it's because an update has not been successful, but if so, don't know how check/repair.

  Hello, Bernadette.

  Thanks for posting your query in Microsoft Community.

  From the description of the problem, your laptop Dell XPS L421x turns off randomly after that Windows Update has failed. I understand the inconvenience for you.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error message or error code?

  2 did you do changes on the computer before the show?

  You can check the updates recently installed that caused the problem:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  I also suggest you to check the error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

   

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

   

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  In the meantime, I suggest you perform the clean boot and check if the problem persists.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 3 of the article mentioned above.

  I hope this helps. Reply with more information about the issue so that we can help you better.

• Can I turn off fieldpoint devices if the pc crashes?

  I am running a labview 8.6 application that manages multiple fieldpoint devices, these units are used among others to power phase 3 drive motor. If windows or the application crashes or fails or if the user for some reason any hit CTRL > ALT > DEL or just turns off the PC fieldpoint devices remain under tension, thus leaving the 3 phase power on! How can I make sure that if one of the following situations occur fieldpoint devices are turned off and 3 phases is turned off?

  Configure the watchdog.

  Ben

• Turn off the tap to click on Dell Inspiron 1525 with Windows Vista

  Can someone tell me how to disable "tap to click" on the touchpad of my laptop?

  I have a Dell Inspiron 1525, running Windows Vista.  It's the standard touchpad I mind, it has not been upgraded.

  Other forums have suggested to go to the control panel > hardware and sound > mouse, but once I'm there, I only "buttons," "Pointers," "Pointer Options" and "hardware".  There is no option to disable "Tap to click" referred to one of them.

  I've updated all the drivers - Windows tells me I have the latest version, if this doesn't fix the problem.

  My hands are too big to type without hitting the touchpad!  So frustrating.  I accidentally moved my slider three times during the composition of this post.  Someone help me please!  That's four times now.

  I thought about it!

  Under computer > C: > drivers > entry > R176423, I ran DPInst.  He installed the Dell Touchpad option in my taskbar to bottom left.  After the reboot, I was able to open a more in-depth version of my touchpad, where I could uncheck "Tap to click".  _ Yes!

  Thanks for all your help, man.  I really appreciate it.  It's really a positive manifestation of the human condition when the volunteers their expertise selflessly to help others.  Keep up the good work, and I hope that this thread will stay up to help someone else in the future.

  Dell Inspiron 1525

  Touchpad

  Turn off the tap to click

  Windows Vista

  R176423

• I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off.

  I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off when the charger is plugged after about 10 to 15 minutes. If I shine a torch on the screen, I see about the display is always. If I select change user from the menu start or stop / restart the machine, the backlight turns on and will last for another 10 to 15 minutes. I tried in safe mode and the same thing happens. Can someone help me with this problem?

  It could be the inverter Board or the backlight itself on the way to the outside. Whatever it is, it is definitely a hardware problem and it will take a good repairman to fix. You can contact Dell and see what they would charge to fix this, just to see if it would be more cost-effective to buy a new laptop or have it repaired. Because it is 5 years since it is manufacturing, you can be better to save your pennies for a new :-(

  SC Tom

• How do you turn off the coast of the touchpad mouse on an inspiron 1545 Dell laptop?

  My touch pad is so sensative, sometimes I touch again and she mobilizes. I VERY rarely use it. I don't want to turn it off completely, I just turn it off. My last laptop is an HP and it had a button to push at the top to turn on and off, but this one isn't. If someone could tell me how turn off when I don't want to use it and turn it back on when I please? Or should I contact Dell and ask them?

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Dell - disable or enable the touchpad by using the access key
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&docid=424135&doclang=en&l=en&s=Gen&cs

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right. He
  "" Maybe sensitivity adjustment to these (check with Dell Support and Forums).

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I need assistance with turning off tension or turning off the video card integrated on my inspiron 530!

  I need help to turn off the power or turn off the video card integrated on my inspiron 530, I had the drivers of the 8600gt installed and ready, but whenever I put the DVI in I get a black pic, so I did research online and I found the way, and that is to disable the video card intel which is located on the motherboard then how?

  I learned that I have to press F2 on the screen of the BIOS and go somewhere.

  so please help me!

  Thanks in advance

  Here's my card, if you need em

  Amount Total of Dell Inc. manufacturer of model system Inspiron 530 system memory 2,00 GB RAM System 32-bit operating system to type number of processor cores 2 64-bit capable Yes storage Total size 298 GB hard drives (C :) disk partition 162 GB free (288 Total GB) disk partition (d :)) 6 GB free (Total of 10 GB) Media Player (e :)) disc of CD/DVD media (g) adapter DVDCD/disc display of graphs of type Intel (r) G33/G31 Express Chipset Family graphics Total available 286 MB dedicated graphics memory 0 MB system memory dedicated memory 128 MB shared system memory 158 MB display adapter driver version 7.14.10.1437 monitor main resolution 1440 x 900 version DirectX DirectX 9.0 or better)) network card Intel (r) 82562V-2 10/100 Network Connection Network Microsoft Tun Miniport Adapter

  
  

• Inspiron 9300 screen turns off after the Windows Logo screen

  Inspiron 9300 my wife became severely infected.  I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over.  Unfortunately, I don't have to restore disks when I bought the computer.  I install windows xp pro service pack 2 full retail version.

  Installation was not a problem until I installed the driver ATI Mobility x 300.  I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver.  After that whenever I put on, the screen turns off after the Windows Logo.  The computer is still running and if I plug an external monitor everythng is fine.

  I tried all the troubleshooting tips I've seen in this forum.  I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls.  I'm sure it's a software problem, but have been unable to solve.  I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.

  I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card.  Any help would be appreciated.

  
  

• Why can't I turn off my touchpad dell? I've tried everything!

  It isn't even a touchpad icon in Control Panel to disable this 'thing'!  And in 'mouse', he is not a touchpad to even click on disable.  What can I do?
  I was told that I don't have this feature, but I managed to activate the touchpad and turns off when I got to my computer in August.

  Hello

  Orders of hardware and software of the TouchPad are dependants ot system OEM manufacturer.
  who is also responsible for the proper functioning of Windows.

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Dell - disable or enable the touchpad by using the access key
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&docid=424135&doclang=en&l=en&s=Gen&cs

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  It is possible that Dell may have changed the functions of control on some models so he better check directly with
  Dell and Forums support.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I can't turn off my dell xp computer. I have to do in unpluging it

  I can't turn off my dell xp computer. I have to do in unpluging it. Why what I can do...

  Try, next time, now just the power button down for 10 seconds.  Unpluggiung can cause overvoltages - damage your hardware.

  As for the issue of the software...

  Try these web pages:
  http://support.Microsoft.com/kb/308029
  http://aumha.org/win5/a/shtdwnxp.php

• I have a dell laptop with windows XP I want to use a wireless mouse but cannot figure out how to turn off the pc mouse

  I have a dell laptop with windows xp I want to use a wireless mouse but cannot understand how to turn off the pc mouse

  Thank you for your help, I saved it for future use. My computer it turns out that's very smart after all the fourth test of every thing, I turned it on and the mouse remotely worked, thanks again

• turn off the "allow for remote assistance" setting prevents someone view my computer remotely?

  original title: Hi, I wonder, if someone has access to my ip address and I want to prevent them from view remotely or even control my activities, turn off the "allow for remote assistance" setting prevent from coming into my computer?

  Hi Dom.A

  
  Yes, if you have given access or invited a person to have access remotely from your computer, then definitely disabled this option helps you. Refer to the following links for assistance on the question and check.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-remote-assistance-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happens-when-I-enable-Windows-remote-assistance

   

  I hope this helps.

• Monitor Dell [E2310H] turns off!

  My monitor Dell [E2310H] disables specific Pic or a Site.

  Ex: When I opened this pic or this site goes off:

  https://goo.GL/UnJAeV

  https://www.rossmanngroup.com/

  and I have to unplug the power cable and back again to work, if I opened this website or this pic to minimize the screen it's OK, but if I open screen full size, it turns off.

  This is a pic of many others like this and I don't know why, if the monitor can work very well most of the time and open this own photos minimize mode just do not touch the edge of the screen

  Once it not closed, that's what's going on cause the problem.

  What's causing this problem?

  (function (id) {var v = document.getElementById (id), isSafari = navigator.userAgent.indexOf ('Safari')! = - 1 & navigator.userAgent.indexOf ('Chrome') ==-1; var op = v.style.position, ol = v.style.left, or = v.style.right, fe = []; var nodeLimit = 50; checkVideo = function() {if (! v.canPlayType | v.error) {var bound = 0; while (v.childNodes.length > 0 & bound 0 & linked A.parentnode.removechild (fe) ;}} else {window.setTimeout (checkVideoRendered, 249) ;}} if (navigator.userAgent.indexOf ('iPad') ==-1 & navigator.userAgent.indexOf ('iPhone') ==-1 & navigator.userAgent.indexOf ('iPod') ==-1) {window.setTimeout (checkVideo, 249) ;}})}})}}}) ("v_5a7bac2671f94699a46e104042386e5f");

  I opened the monitor to fix it and I found this, the screen is lg but the monitor Board and frame is dell, is this normal? (used monitor)

  

  

  [using DVI, 740, ram 8 GT, 8300 FX] is all this work very well I test [I'm sure the screen itself]

  Thanks anyway I fix it myself, it was 4 capacitors?  It launched my 50 cent like :)

  

• Turning off Dell XPS SubWoofer

  Hello

  Is there a way to disable Dell XPS Sub Woofer, sometimes, when the sound is high, the woofer starts popping up, so I just wanted know if there is way to temporarily disable?

  Thank you

  Shubham

  Hi guptashubham123,.

  There is no option to turn off the subwoofer in XPS system.

  You can modify the equalizer settings audio application in the system tray.

  Here are the steps on how to change the audio settings.

  1: on Windows 7 systems, click Start --> Audio Dell--> Dell Audio in Windows 8 systems, type Dell Audio from the splash screen and select Audio Dell utility.
  Reference Dell Audio from Realtek utility is launched.

  2: you can change the settings you want in the different tabs on the utility.