Similar Questions

• Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

  Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

  It was the strangest thing, but I think I solved the problem. Use the CC version 2015.1 on a Wacom tablet using Win 8.1 and inadvertently from the same batch of photos, I had downloaded twice and it was very confusing because it did not prevent the duplication of files, but the files where not really there. I didn't know whether to remove or delete the files with question marks for fear of destroying a link or something so merged files and now everything works as it should, once chosen in the library that the photo appears in develop mode.

• Photo Viewer Windows will not start

  My windows photo viewer has recently given the error code that it wouldn't start.  I tried to solve the problem by running the sfc/scannow.  The result: protection of resources Windows found corrupt files but was unable to remedy.   The viewer still does not start.  I Systime of operating disk that accompanies it by computer, but there is a warning on the disc, saying that the resettlement will erase all data and files from the hard drive.  All of the suggestions.
  Another photo program stopped working as well as the windows photo viewer.

  We will see if there is a problem with your file system.

  Go to start / accessories / Control Panel and right click on command prompt and click Run as administrator.

  Type sfc/scannow (Note space is inmportant) and enter and let it run.  It will scan and fix some of your system files.  If all goes well it will finish without error (let us know if it ends with errors, it cannot be resolved) then try your programs and see if they work now.

  If this does not work, try a repair/upgrade to systems level by bootiing on your CD of the OS.  Here is a link to some pointers on how to do it: http://www.vistax64.com/tutorials/88236-repair-install-vista.html. If you have SP2 installed on your system, you must first uninstall it for this process to work (and then download and reinstall when it's done). It is a much more complete repair process the command sfc (and may take a few moments).  Then again your programs.  If you have still the problem is probably with the program and not with Vista - and we can work on solutions so that if it becomes necessary (or refer you to another Vista forum that specializes in installation programs).

  Good luck. I hope this helps.

• Exception of the UI by clicking provisioned resource... Houston-25003: LDAPUserForm1UD_LDAP_GRPVO object of type View object is not found

  Hi all

  Under the tab accounts for a user, whenever I click on the resource brought online, I get the following error on the user interface.

  Messages for this page are listed below.

  Houston-25003: LDAPUserForm1VO object of type View object is not found. Houston-25003: LDAPUserForm1UD_LDAP_GRPVO object of type View object is not found. oracle.jbo.NoObjException: Houston-25003: LDAPUserForm1UD_LDAP_GRPVO object of type View object is not found. Localized message is not available.  Error returned is: oracle.jbo.NoObjException: Houston-25003: LDAPUserForm1UD_LDAP_GRPVO object of type View object is not found.

  I understand that LDAPUserForm1UD_LDAP_GRPVO is the name of the child form to the resource of the LDAP user. While they inspected the child form, I find this design console.

  
  

  LDAPUserForm1VO is the form created for the LDAP instance. SDM export shows that this exists in the location "oracle\iam\ui\runtime\form\view\pages\mdssys\cust\site\site\LDAPUserForm1CreateForm.jsff.xml".

  
  

  In addition, if I try to create a new form for this Instance of the Application, it fails with the exception:

  
  

  • oracle.jbo.NoDefException: Houston-25002: definition of the type of the view definition sessiondef.oracle.iam.ui.runtime.form.model.LDAPUserVersion6.view.LDAPUserVersion6UD_LDAP_ROLVO is not found.

  
  

  
  

  While I can see the error, I'm not able to find a solution to what for what is absent and where!

  Clues from anyone, which was faced with this or at least help troubleshooting would be great.

  -Thank you,

  Def-ender

  If your sandboxes have the elements of form generation on the side of the administration of the system, then most likely you have replaced a sandbox created after the publication by a prior created sandbox which does not contain the information from the form in the file CatalogAM.xml. I think that's the name. To oracle support site, there are best practices sandbox offline that you can search. I'm restoring your mds changes and then recreate these forms and publish every sandbox in order before new forms are created.

  -Kevin

• Developer Mode error: outdated., the xxAM.xxVO1 view object contained no trace. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  Hi all

  I'm creating a Maunal search page.

  To do this, I created a view based on a custom display object.

  Page contains 2 parameters.

  If I give all settings and click the OK button.

  It gives the following error.

  Developer Mode error: outdated data

  
  

  This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.

  
  

  Cause:
  The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.

  If I don't give any parameter and click go Button.The content of the view are displayed.

  So if I pass all parameters and click Go, then the corresponding record is displayed.

  Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?

  Please help me.

  Grateful for your help!

  -Aren

  You use the object of the view for the search criteria and search results fields.

  I suggest you to remove references of VO fields of search criteria, item1 and item2.

  And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.

  String buCode = pageContext.getParameter ("item1");

  String lsiCode = pageContext.getParameter ("item2");

  Thank you

• ZeroClient and pool view selection screen

  Currently have a problem when a user selects a pool of offices, this pool may be out of jobs, they will get the message that no desktop computers are avilable and just walk to the machine.   Question could someone come behind them and try again.  Is it all the same to drive this overrun time or logoff after a failed attempt of connection to the pool

  No, this isn't one, done a bit of research and this has been added in fact to 4.6.

  Here's the Administrator's guide:

  Set a Single Sign-on time-out to show users

  By default, when a user connects to view the display Client Server connection, single-sign - on (SSO) is enabled. The user doesn't have to connect again to connect to the desktop view. During a desktop session, a user can leave the office, allow it to become inactive and return without having to authenticate again. To reduce the risk that someone else could start using the desktop session, you can set a time period after which the user SSO credentials are no longer valid.

  You configure the SSO time-out by setting a value in the view LDAP. When you change the view LDAP on a login to view server instance, the change is propagated to all instances of server connection view replicated.

  The timeout is set in minutes. The time counter starts when the user connects to the server to connect to the view. For example, if you set the value to 10 minutes, the credentials of the user SSO are struck down 10 minutes after the user connects to the server to connect to view.

  NOTE on computers desktop view that are used in local mode, a cash operations that lasts longer that the SSO time-out value causes SSO powers the user expire. For example, you can set the time-out to 10 minutes SSO. A user can connect to the view connection server and discover a desktop computer. If extraction is 20 minutes, the user must log in again to connect to the local computer, even if the user has not yet spent any time in a desktop session.

  20

  VMware, Inc..

  Prerequisites

  See the Microsoft TechNet Web site for more information on how to use the ADSI utility on your version of Windows operating system.

  Procedure

  1. 1. start the ADSI utility on your server host connection view.

  2. 2 Select or connect to DC = vdi, DC = DC = int, vmware.

  3. 3 on the object CN = common, UO Global =, OU = propriΘtΘs, attribute set the EAP-SSOCredentialCacheTimeout to the new limit of SSO time-out in minutes.

     The default value is - 1, which means that no time-out SSO is defined. A value of 0 disables SSO.

  On remote desktops, the new SSO time-out limit takes effect immediately. You don't need to restart the server to connect to view service or the client computer.

  On computers that run in local mode, the new SSO time-out limit takes effect the next time that a client computer that hosts the local office sends a message of pulse to view connection to the server.

  I hope this helps.

  Linjo

• ADF type VO View Definition is not found.

  Hi, we use SVN repository to download the code. If I use SVN commit, it works perfectly fine. However, if I use JDeveloper to load the new VO/.java in SVN and check-out to rebuild and load I get error (oracle.jbo.NoDefException) Houston-25002 below: definition of the type of the view definition xx.model.views.EmpVO is not found. I have compile to manually each object to make it work. Unable to build/make project model. Let me know how to fix these objects or a project to rebuild all the object beneath it. Thanks, Abhijit

  Hello

  According to your description I don't see how I can reproduce the behavior. Make sure that you use a recent version of JDeveloper and next time you post, share this information with us. My assumption is that you use tools 3rd party like turtle in combination with JDeveloper SVN checkin. This can cause the problem you are experiencing

  Frank

• Permission to access the dynamic views v$ users not sysdb

  Hello

  I am a beginner in Oracle and this is my first post in this forum, so please be gentle

  I am trying to give some capacity on certain points of view a user not sysdba like this:

  What worked well:

  create view V_SYS_SESSION_LONGOPS as (select * from v$ session_longops);

  GRANT SELECT ON V_SYS_SESSION_LONGOPS TO myuser.

  What has not worked:

  create view V_SYS_SQL as (select * from v$ sql);

  GRANT SELECT ON V_$ SQL to myuser.

  GRANT SELECT ON V_SYS_SQL TO myuser.

  The problem is that these SQL commands are accepted by oracle, but my user does not see this second view (while the first works very well).

  I did something in a wrong way?

  Thank you

  What is the error?

  Having the MYUSER account run select * from SYS. V_SYS_SQL

  Hemant K Collette

• Why Ai CC 2014, when I use a pathfinder on two objects tool, their anchor points break a bit from where they were? I search in all the nod to under VIEW options & could not find the culprit. Help, please!

  Why Ai CC 2014, when I use a pathfinder on two objects tool, their anchor points break a bit from where they were? I search in all the nod to under VIEW options & could not find the culprit. Help, please!

  It looks like "snap to grid of pixels" just once more.

  Uncheck the box "align new objects to the pixel grid" in the menu of the transformation Panel.

  Select the objects and uncheck "snap to grid of pixels" in the transformation Panel.

• Login to view server does not accept connections from Microsoft RDP

  Hello everyone and thank you for taking the time to help me in my attempt to jump into the world of the VM.

  I managed to get everything up and running with little trouble, but I'm a bit confused on the subject of clients.

  I understand that the PCoIP connection method is preferred... but I want to better understand the methods of connection and keep soft things as possible.  Being as I'd like to be able to connect to the pool by using the customer view and Microsoft's RDP client provided with windows, but I meet an obstacle.

  My office pool was initially set PCoIP preferred, but allowing users to substitute... I could not connect via the view client no problem for my pool of offices not persistent, but not with the Microsoft RDP client using the address of the connection manager.  If I put the IP address of one of the XP VM in the pool I can connect via RDP, but not via the connection manager.

  I get the pool to be favorite RDP that allows the user override... no change.

  So I'm confused as to how it works... is the connection broker/manager only work with the client of the view, or I would be able to connect anyway?

  Am I missing some setting?  I did my setup based on the 'evaluation' guide, then maybe there's a checkbox miss me.

  The pool works seamlessly with VMware view client but not MS RDP. Pointers on where to find would be greatly appreciated.

  Here is my config of pools:

  Number of workstations (at a minimum): 10

  Number of workstations (maximum): 10

  Number of workstations (available): 2

  Stop commissioning error: Yes

  VM naming pattern: NPVM

  Tags: all the

  What VM is not in use: do nothing

  Turn off and remove the virtual machine after the first use: No.

  Automatic disconnection after disconnection: never

  Allow users to reset their desktop: false

  Allow multiple sessions per user: No.

  By default the display protocol: Microsoft RDP

  Allow users to override the default protocol: True

  Quality of Adobe Flash: do not control

  Adobe Flash limitation: disabled

  Josh

  Chicagojsh001 wrote:

  ITTech2002, in your response you said

  «No need to use the MS RDP Client directly, but it is a good work-around if necessary.»

  You say that you cannot connect to the pool of offices with the help of MS RDP, rather you need to connect to PCs by IP address rather than the broker for connections are so?

  View client appealed to RDP and PCOIP according to which selected protocol.  The display client uses the broker for connections to allocate your session, provide the usb redirection and map printers.   So in a sense, you can use RDP with the broker for connections with no problems, but there must be through the client view.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Look an OSX 'point of view to portrait"not"view of landscape ".

  My Air 11 '' has a screen that is up 5 5/8 "and 10" wide.

  This is not a screen ideal for reading a document, if you are looking to him normally, but if I had to rotate and read the book with the WIDTH being 5 5/8 "and 10" HEIGHT, would be perfect. of course, I have to hold the computer in this way while I was reading, but I would try this.

  is there such a feature that would allow me to test this out. interested in native or third-party options.

  Thank you

  Look an OSX 'point of view to portrait"not"view of landscape ".

  If you use only the MacBook Air screen it's doable, but it's hard to return to the normal display.

  Try this (works) in El Capitan:

  1. Launch of system in the Apple  menu preferences.
  2. Command-Option-click on the "View" icon
  3. On the right side of the display preferences, search for the "Rotation" menu dropdown visible again.

  

• RES://C:\Windows\system32\mmcndmgr.dll/views.htm (error not found)

  HI, I am unable to solve this help please me...

  RES://C:\Windows\system32\mmcndmgr.dll/views.htm (error not found)
  By these Services on the server are not begin in 2008r2

  
  (1) group policy

  (2) Service Control Manager

  (3) the Client DNS events

  (4) browser

  (5) Kerberos security

  All the above services do not solve & due to this FSMO roles are
  not work & unable repeated files.

  Please help me on this point, it's to create a big problem for me here.

  Hi Varun,

  I suggest that you post this question in the Windows Server 2008 support TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.

• < f: view > tag is not set by default under the < jsp:root > tag of the root while creating .jspx in jDeveloper 11 g Release 1

  Hi all

  I am a beginner for Jdeveloper and ADF, I installed Oracle XE and Jdeveloper11g R1 in practice.

  I created the application, under the model, project Viewcontroler, created components BC and made mapping.

  Now created new page and tried to expose VO (from data control) on the page, immediately it's end with the error message saying "invalid parent for the element af:document element.

  I found that the problem with the tag < f: view > isn't there (not defaulted) under the tag root, by go - ogle.

  My question is why < f: view > tag is not set by default when creating the .jspx page.

  is there any work around to avoid this problem, because every time I can't add this tag manually to the new page?

  Thank you

  Aurore

  You are created JSP, not the a jsf page.

  Here's what you'll need:

  

• Is there any photo reliable consultation programs, Photo Viewer Windows will not show photos

  IS THERE A FREE UPDATE OF THE WINDOWS PHOTO VIEWER, IT DOES NOT SHOW MY DIGITAL PHOTOS. ARE THERE OTHER PROGRAMS TO LOOK AT A PICTURE WHICH WILL RECOGNIZE ALL FORMATS OF PICTURES? ANY HELP WOULD BE APPRECIATED. IT IS A PERSISTENT PROBLEM. Thank you.

  Did you installed Windows Live Photo Gallery?

  It supports several formats, including RAW files.

  Windows Photo Gallery has native metadata management and tagging support and the Windows Imaging Component being extensible, it can organize and see any image format for which a third party WIC codec is installed. By default, it can view the images JPEG, BMP, PNG, TIFF and HD Photo , so that video

  http://Windows.Microsoft.com/en-us/Windows-Live/Photo-Gallery-get-started

• Folio showing in viewer content, but not when published in Custom Content Viewer... Please help...!

  I shared a portfolio for review in the content viewer and everything seems ok, but when published (public / free) custom Viewer (v24) does not show it. What could be the problem?

  Thank you and excuse my English...

  Check your PM, I'll try and help you directly.