View on two screens without a mirror document?

Similar Questions

• How to string U2414H two screens without connector DIsplay Port

  I have a U244H screen and want to buy another to increase my overall display area.

  Currently, I connect to the U2414H using the HDMI output on my laptop. My laptop has 1 x HDMI and 1 x VGA outputs. Is it possible to set up daisy chaining with this configuration?

  I used the following Setup successfully. U2414H connected to HDMI and VGA monitor connected to the VGA output of my laptop and working well. However, I prefer two monitors of U2414H due to the smaller borders.

  The P2414H the same resolution (1920 x 1080) and the VGA port.

  The S2415H NOTE from the ADMIN: broken link has been removed from this post by Dell > the same resolution (1920 x 1080) and the VGA port.

• Two screens on x 220 & Ubuntu 12.04

  I'm runing Ubuntu 12.04 on my X 220. All fortunately working with external assistance from DELL UltraSharp U2312HM 23 ' cable DisplayPort. There were a few problems with the implementation of two screens in earlier versions of Ubuntu, but apparently 12.04 output fixed major problems (more info here).

  I thought I'd get another Dell with the same configuration screen. Laptop has two outputs DisplayPort and VGA graphics. And monitor Dell that I think supports this connection.

  My question: is it possible to use two screens without the ban?

  Thanks for the help!

  Yes, this should be no problem, but 2 simultaneous views of your limit will be - you have to pass off the portable computer LCD (LVDS) when you run the two external monitors.

  Whether you use a home or built-in ports station should make no difference.

  Intel new Ivy Bridge (in the X 230) taken care of 3 outputs simultaneous, which is nice.

• TX1300-65 presentation in two screens

  Hello!

  The customer asked me if it is possible to use two screens to share presentations on TX1300-65, but I didn t any document found on the page of cisco that explain this information.

  In TX1300-47, the document indicates, I can use a HDMI splitter and plug it into the Port of the ACU, but this information is not predefined in docs TX1300-65.

  Anyone know if I can use this separator in a TX1300-65?

  Thank you

  Emerson

  Hey Emerson,

  Yes, TX1310 has a splitter HDMI that you can use to connect additional output displays to your system. The equipment has a part called Expansion Box", which is used to extend the audio and video. In this box, you can connect up to two HDMI output displays to show the presentation on them.

  I have personally tried this feature by myself, it works very well. I connected two screens of presentation to a TX1310 without using any external video separators.

  It's the image of the Expansion area where you connect the auxiliary displays:

  

  To do this, in general, everything you need to work:

  • Correctly connect the HDMI output of the codec to the HDMI in of the Expansion area
  • Correctly connect the HDMI output of the Expansion area to your two additional screens

  Regarding the screens are supported, you can purchase auxiliary Cisco views (they are large professional screens), however, the Cisco TelePresence systems are designed to work with any Full HD monitor that connects to the system using an HDMI or DVI standard interface, you can use the HDMI-HDMI or HDMI-DVI cable.

  I hope this helps.

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• There are two screens (split screen) showing when the computer is turned on.

  There are two screens (split screen) showing when the computer is turned on. How can I delete one side to return to a view?

  Hi Ikthomas1,

  When did you start in this topic? Were there recent changes to the computer like installing new hardware, software or updates? If it is a recent issue, follow the steps in this document to perform a System Restore. This will restore your comuter up to a point located before the show.

  If you have antivirus software installed, run a scan of filling. You can also use Microsoft Security Essentials to scan your computer.

• How to choose the display by default when you use two screens on my Mac Pro?

  How to choose the display by default when you use two screens on my Mac Pro?

  The default view when you have several is made that you drag the little icon in the menu bar in this pane:

  

  .

• Connection of two screens on the PA3508E-1PRP Port Replicator

  Hello

  Anyone know if you can connect two screens on the port replicator? and use it with the option "extend my desktop" in Windows?

  Thank you

  Concerning

  It seems that you're talking about the Toshiba Express Port Replikator for Portege M400.
  In my view, the Port Replikator Express supports simultaneous use RGB & DVI only if the portable computer system unit itself also supports the simultaneous use of RGB & DVI.

• How can we operate two screen on vista - do not reproduce but to run applications separated on each screen-AT

  How can we operate two screen on vista - do not reproduce but to run applications separated on each screen-AT

  Choose the option 'Extended' instead of 'mirrored '.

  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

• Want to change my screen external external screen to the mirrored display option.

  I'm trying to connect my Acer laptop to my Sony with HDMI TV.  When I plugged the the area of the external screen HDMI cable appeared offering me 3 choices; display mirroring, extended or external only.  I took an external display only.  However, instead of showing the screen of the laptop to the TV, two screens were black. The signal wasn't going to the TV. So I thought I could at least change external display only to in reverse, so if nothing shows up on the TV, then at least the screen will become not empty for the laptop. But now when I connected the HDMI cable to the laptop monitor and the TV are empty, so I can't change the settings. I can't return the new display detected, where I could change the setting. When I unplug the HDMI cable to get my rear monitor, the external screen does not give me the 3 options because there is no HDMI cable.  How do I get external display to change the only mirrored external display option?

  http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

  Read the info on the links above.

  See if that solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• How to communicate between two screens

  hiiiiiiii refugees...

  Today, my task is a communication between two screens...

  I created a screen that I view the image and the name of the image...

  control of the screen, it is in the two screen...

  Please tell hw to switch returns it an amusement value in two screen display a...

  The best way would be something along the lines of:

  Screen1.Java

  SerializableAttribute public class Screen1 extends {}

  ...

  public void updateScreen (int value) {}

  update of the screen accordingly using setText, setBitmap, setLabel and other

  ...

  Invalidate(); Maybe not even that - the screen will be repainted once you jump Screen2

  }

  in response to the pressure of the button

  Screen 2 scr = new Screen2 (this);

  UiApplication.getUiApplication () .pushScreen (scr);

  ...

  } / / End of Screen1.java

  Screen2.Java

  SerializableAttribute public class Screen2 extends {}

  ...

  private _parent Screen1;

  public Screen2 (Screen1 parent) {}

  Super();

  _parent = parent;

  ...

  }

  In response to the button that is clicked

  _parent.updateScreen (valueAssociatedWithThisRadioButton);

  ...

  } / / End of Screen2

• The value of a field to the bottom of the screen without setStatus()

  Hello

  I want to set a field to always be at the bottom of the screen without using setStatus() as it is opaque. Most of the discussions I looked at have a complex layout on top to a field at the bottom. I have a very flexible presentation, now that I have just my fields added to the Senior Manager. Is there a good way to push a field to the bottom of the screen? Or is it only possible by substituting the functions of some manager?

  Ben

  It's not trivial.

  You must create a Manager and tell it to use all the way up and not be vertically scrollable.  So the dimensions that are placed in its sublayout will give you the height available to you.

  Now, you must add two managers to this Manager.  The first is that you'll add all you fields too - it will be a standard value, so that it scrolls.  The second will be the stuff you want at the bottom of the screen.

  In sublayout you will be setting page, the second field first, get its height and then set its position is at the bottom.  This will also give you the area that is available for your manager to scroll.  You will be then layout manager to say the things that he is restrcted to the height that you left.  As he scrolls will not worry.

  Finally, in sublayout, you will find setExtent making sure you use all the height that you were given.

  For more information:

  http://supportforums.BlackBerry.com/T5/Java-development/how-to-extend-Manager/Ta-p/446749

  http://supportforums.BlackBerry.com/T5/Java-development/create-a-custom-layout-manager-for-a-screen/...

• Problem update Listfield using two screens

  Hi there, hoping you can help me with this

  I have two screens which extends the screen. In the first, I display a listfield with some elements, and when I click it, I'm going to the second screen where I show some details about the selected item. In this screen, I can delete this element (which incidentally, is an element of a vector). How can I return to the screen first, and see the listfield "updated" (in other words, without the deleted item)?

  Thanks in advance

  You have to pop the first screen, where (just before), you push the second screen, is not in there...

  And in onClose(), push a new instance of the first screen... but make sure you save the changes in the vector before that...

• How can I run two screens side by side in Windows 7 Ultimate?

  I use Windows 7 Ultimate, 32-bit version on a Dell desktop computer.  I have two LCD screens showing identical pictures.  What I want to do is to have the two screens as one, so that I can drag a document or an image on a screen while watching another image or another document on the original screen.  I'm used to be able to do this until I had to format my C: drive to get rid of a malfunction.  I have reloaded my Windows 7 Ultimate but forgot or cannot display restore both. A single screen appears when I look at the display section in the Panel. Any help to get back to my two original screen function would be very welcome.
  banned

  1 DVI, the second connector is VGA or also known as the D - Sub. A monitor itself requires no software to run.

  What connectors you join takes him to the computer? Connectors in the same group as the USB, audio jacks and network are referred to as being on board, connectors in parallel slits separated from these ports will be a graphics card. In this photo embedded graphics connector would be where is the serial port.

  

  Not all motherboards will allow you to use both the on board graphics card ports at the same time and. Installation of the card automatically turns off the edge card.

  In this example, the graphics card has two types of port (analog video port = VGA) and in this case the two ports can be used.

  Some graphics cards have only DVI ports, but most will support VGA with the use of an adapter DVI / VGA

• I have two monitors, I need remote desktop for my computer at home and be able to see two screens on my home computer, how do I do this?

  I have a laptop with a single monitor.

  I need remote desktop for my computer at home and be able to see two screens on my computer at home.

  How do I do that?

  Original title: dual monitor question

  If you look at 'Options' remote desktop and look at the "View" tab there is a checkbox for "use all of my monitors for the remote session.  You may need to be an administrator to set this option.

  Check out these similar posts too.

  http://www.Google.com.au/search?q=remote+desktop+dual+monitor&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = WgtJUKLeH6mRiQe834DoAw

• is it possible to share the surface of lightroom on two screens?

  Is it possible to divide the surface of lightroom on two screens? Especial the two side columns?

  Yes, it is possible to display the images in Lightroom on the secondary screen.

  Please visit the following link: the help of Adobe Photoshop Lightroom | View the library on a second monitor

  Let me know if it helps.