Connection of two screens on the PA3508E-1PRP Port Replicator

Similar Questions

• The PA3508E-1PRP Port Replicator supports wide screen resolutions?

  Hi all

  I think to buy a Tecra M9 - 14 FT 7800 (with the NVIDIA Quadro NVS 130 M - 128 MB graphics card) - will, in combination with the Replicator to ports Express PA3508E-1PRP let me fully to use an external monitor with a resolution widescreen native 1680 x 1050 over DVI?

  Thanks in advance,

  Ben.

  Hello Ben

  Unfortunately I can't give you the exact answer, but I'm a bit skeptical about it. As much as I know Port Replicatior has no influence on the signal because the signal from the laptop will just looped through. The question is what resolutions on external screen will be supported by the graphics card for s laptop.

  IN the document s user Tecra M9 manuals I found track information: as the operation of the port of all monitors DVI (Digital Video Interface) could not be confirmed, some matte DVI monitors will not work correctly.

  In any case, as far as I know as Tecra M9 comes with Intel 965 GM graphics card and we're working on how to get the resolution widescreen 1680 x 1050 on external display.

  If you need help with this please write again.

  Good bye

• Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator

  Dear all,

  I have a Portege R700 series (PT311E) and a high speed P/N PA3838E-1PRP port replicator.

  Today, I tried to connect two external monitors on the VGA port and the second HDMI port replicator port.
  Unfortunately, I was not able to configure the laptop / duplicator to * work with external monitors stand *.

  Do not work in this way portable stand and port replicator becomes useless.
  Although it is a default installation on other products manufactured without drivers and special parameters will be needed, I hope that in our case a key combination or a driver may resolve this problem.

  To be even more precise, I don't want to also use the laptop screen. I want to just connect laptop closed and turned off in the duplicator, to turn on the laptop the power button of the port replicator and to have the image on two external monitors.

  Thank you for your quick responses,

  Best regards

  Cristian

  Hello

  What R700-xxx you have exactly?

  How to connect two monitors? Are the two monitors connected only to the Port Replicator or is one of the monitor connected to the laptop and the other monitor is connected to the duplicator?

  Could you please post this?

  I'm not quite sure of HDMI and Port Replicator (PA3838E-1PRP) but many laptops equipped with support DVI dual video output (VGA and DVI) port using Advanced Port Replicator III (PA3314E-1PRP) or Advanced Port Replicator III more (PA3474E-1PRP).
  But this is only possible if the laptop itself supports the simultaneous use of RGB & DVI too.

• Color variation of Windows 7 on two screens despite the correspondence of the monitors, model, connection & settings

  I'm managing about 20 machines to windows 7 64 bit, but have noticed that, in each of them with two screens, there is a slight color variation (right monitor being darker and more colorful) between the two monitors despite the monitors of the same brand and model (workstation make & models vary).

  As a test I switched monitors and the problem remains.
  I also tested the type of connection cable / in case the fault is due to the difference between VGA/DVI but the prob persists indicating is not the screen, indicating that it is to the BONE (the denominator) as graphics cards vary also in the brand/model.
  would be very happy for any help you can offer
  Thank you

  Hello

  The question you have posted is better suited for the TechNet forums. You can post the question on the link below.
  http://social.technet.Microsoft.com/forums/en-us/categories/

  I hope this helps!

• Through router remote desktop connection gets login screen, but the administrator is the only option (windows 7 pro)

  I have a new windows 7 pro system which has been configured to host a remote desktop connection.  There are 1 user account (active admin), the port number was changed from 3389 and I think that the firewall is disabled (it's Norton Internet Security and I tried to completely disable the firewall).

  When I established a remote connection from another computer on the same subnet, the client asks for login/password and the connection ends and goes directly to the screen of the user.

  This subnet has an internet connection via a firewall or router.  It has been configured to redirect incoming connections for the custom to the host port number.

  When I establish a remote connection from outside through the firewall I am invited to login/password, but the Welcome screen appears and the only options are administrator and other users.  Administrator is blocked for the account restrictions and using other users to type the login and the password does not work - it still fails on bad login/password.

  I've seen this problem described in other forums, but have not seen a solution - anyone got one?

  Thank you

  Hello
  I guess that its due to the settings.
  Check out this link. you might get a few steps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  Kind regards.

• Bluetooth connection with two devices at the same time? (on TX)

  I have a Palm TX and am trying to connect to the Palm Bluetooth keyboard wireless AND my cell phone of Nokia (Internet, etc.) at the same time.  The TX works very well with each device individually.  However, when I try to use them together, it won't work.  If I connect the keyboard first, then try to connect to the phone for internet access, it automatically CUTS the keyboard; and vice versa - any order of connection, it will cut the previous when it is connected.  (If the keyboard is connected and I use a fast connection button to go directly to the internet, when he tries to connect it will say that the port/cable is bad and can not connect.)

  (I know generally that a bluetooth device can support up to 7 other devices in its network and I've read where people supposed to logged keyboards and phones to the TX before I bought the keyboard).

  Any help is appreciated!

  fitnessdr wrote:

  Thank you for the information.  So if I had to return the new bluetooth keyboard, should I get the 'Palm 3169WWZ Wireless Keyboard", or y at - it another model I should look for?  (From what I can tell, I think he will use IR)

  Thank you!

  Well, that's the one I use.

  Don't forget to download the driver for the more recent (1.13) for the keyboard in the Palm Support pages for the keyboard:

  http://KB.Palm.com/wps/portal/KB/na/keyboards/palmuniversalwirelesskeyboard/unlocked/downloads/page_en.html

  Do not install the driver provided with the device on the disc - 1.13 is designed for the TX and fixes a bug that existed in the original pilot.

  WyreNut

• Portage Z30-A-13W connected to the high speed Port Replicator III - USB problems

  Hi all.

  We recently bought a new Portage Z30-A-13W and Hi-Speed Port Replicator III.
  Setting network and graphics work correctly with port replicator, but the USB ports don't work at all.

  I tried the port replicator USB 2.0 and USB 3.0 and I can't seem to work with a keyboard, mouse, USB key or a mobile phone.

  In the case of mobile phones, it is also no output power of the ports that the mobile does not start to load.

  At any one another experianced this problem and what was the resolution.

  Thank you very much

  Jonathan Davies

  Hello

  As far as I know additional drivers are not really needed to use the USB ports.
  This is why I m wondering why don t USB ports work.

  It might be possible that ports high speed Port Replicator III USB are faulty, but to be honest, I can't imagine that all 6 USB ports may bad work at the same time.

  So maybe it s a software problem.
  First of all, I would recommend the default BIOS and check the USB legacy support for keyboard and mouse could be activated.
  After access to the Device Manager and remove / delete the USB hubs and controllers in the list of devices.

  Keep high speed Port Replicator III connected to the computer and restart the device.
  Usually, the system should recognize automatically deleted USB ports and must update the drivers of USB ports.

  I hope that the USB ports don't work after this short workaround solution.
  Keep your fingers crossed.

• Random BSOD after installing the drivers of port replicator.

  Hi, my boss has just got a new laptop (TP T400s running Windows 7) and after setting up the it, it worked great. But then I installed the drivers for the port replicator with digital video and after the reboot, just after the login screen, USB ports it BSOD, complain igdkmd64.sys. Restarted again, he has not crushed during his connection this time, just a little while later, when clicking on the start menu. After several tests, the Replicator seemed to work, but not the digital video port. The DVI connector did not work correctly, just the mouse pointer has been posted. Try setting the resolution did nothing and switching output source through Win - P causes a strange flicker for a minute or two and then the machine automatically rebooted. Tried the driver found on the CD (1.0) and also those that are available via the Lenovo Web site of (1.5.6.8), always the same thing. Now, I uninstalled the drivers and the random BSOD keep reappearing.

  This problem is common? The duplicator is defective or is it the ThinkPad? The windows installation is screwed, peut it be repaired? What is the Lenovo return policy?

  I saw many complaints on this forum about random stop, it would be unacceptable to us that the current BSOD we meet a few. This is common?

  P.S.: We try to get the job done, not beta-test of Lenovo products!

  Thank you

  nbuduroi wrote:

  Hi, my boss has just got a new laptop (TP T400s running Windows 7) and after setting up the it, it worked great. But then I installed the drivers for the port replicator with digital video and after the reboot, just after the login screen, USB ports it BSOD, complain igdkmd64.sys. Restarted again, he has not crushed during his connection this time, just a little while later, when clicking on the start menu. After several tests, the Replicator seemed to work, but not the digital video port. The DVI connector did not work correctly, just the mouse pointer has been posted. Try setting the resolution did nothing and switching output source through Win - P causes a strange flicker for a minute or two and then the machine automatically rebooted. Tried the driver found on the CD (1.0) and also those that are available via the Lenovo Web site of (1.5.6.8), always the same thing. Now, I uninstalled the drivers and the random BSOD keep reappearing.

  This problem is common? The duplicator is defective or is it the ThinkPad? The windows installation is screwed, peut it be repaired? What is the Lenovo return policy?

  I saw many complaints on this forum about random stop, it would be unacceptable to us that the current BSOD we meet a few. This is common?

  P.S.: We try to get the job done, not beta-test of Lenovo products!

  Thank you

  The driver win7 for Replicator usb with digital output is not released yet. So, you can not get it work under win7. I remember seeing an official brochure of the product, in which there is a line indicating that a win7 driver will be released in December.

• Tecra M7 & express II PA3680E-1PRP port replicator do not work together

  Hello

  I ve a Toshiba tecra M7 in recent years and have just bought a brand new sealed express duplicator II model PA3680E (docking station) but unfortunately it does not work and a new replacement, sent by the provider does not work.

  What's happening:
  With docking station connected to the start; nothing happens, and the Green dock light stays off.

  Windows when I put the tecra m7 on the dock it connects and disconnects immediately then will not reconnect. The power of power port, the lan port and the power switch work on the dock, but I understand that these are just happening through connections. The Green led power lights up also for less than a second.

  For example, when I do a connection hot, windows is connection chime followed immediately by a chime of disconnection and restores, also all USB connected devices flick-on and immediately off the coast.

  I ve tried under the original Toshiba windows XP install (with the latest Toshiba) and a fresh install of windows 7 (fully updated with all the update from Toshiba). BIOS is the latest available 3.50 (also tried 1.70 & 3.20 bios). tried bios USB legacy on and outside.

  Can someone please help

  Hello

  > With docking station, connected to the start; nothing happens, and the Green dock light stays off.

  The green light that is placed near the eject button it lights up green during normal operation and must be extinguished if the phone has been disconnected.

  If the led does not light green, so I guess that the laptop is not connected correctly.

  If you connect the laptop for the first time to the port replicator, a message should appear stating the device connected to the port replicator are ready to use.

  In my opinion, there could be a problem with the pins or connectors, but the question is what may be touched connector: on the side of Tecra or port replicator

  However, I think that go you to your dealer and need to test another.

• Tecra A4 and the docking station Port Replicator III

  HI, I would buy a Tecra A4 with the staition of home, but I see that the docking POrt Replicator III has no s-video, bur the pc Yes. Anyone knows if I can use the s-video on the oc when I put the pc on dockin station?

  Hello

  Sorry, but it is not possible. You can only use the S-video port on the device directly.

  Good bye

• External keyboard works only after the restart with Port Replicator III Plus

  The problem is that when I start the laptop, the external PS/2 keyboard does not work. When I reboot keyboard this one turns around and then I can use it.

  This problem occurs on a laptop Toshiba Tecra with an Advanced Port Replicator III Plus. I used several keyboards, so this isn't the problem. I changed a value in the bios which is used for devices USB (mouse/keyboard). I disabled the option, because I use a keyboard and a PS/2 mouse, but the problem is not resolved. I hope someone has an answer to this problem.

  Hello

  It will be interesting to know what model Tecra you use. Is it perhaps Tecra A6?

• Can I safely lance two screens on the K450?

  Im running a 21 "monitor could I add a second monitor safely with 280 watt power there?

  Plug

  I7-4770

  2 TB hard drive

  GTX 650 2 GB

  12 GB of ram

  DVD - rw

  280 Watt power supply.

  To the best of my knowledge of the connection of the second monitor (as well as the first unless your device is an all in one) is the right signal and there is no transfer of power involved as well as the size of your PSU only comes into play.

• When Firfox is open I have two screens / window, so a thiner screen upward and the main screen downstairs, the cursor and follows him into two screens, so the top it scrolls, how do I get rid ot the zipper extra screen?

  Windows 7, on the top of the Tower, problem as stated above.

  Try Firefox Safe mode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• The smartwatch can connect with two phones

  I am looking to buy Sony smartwatch, and since I have two android phones, I was wondering if it would be able to view the notifications from two phones?

  See you soon,.

  Dimitar

  Smart Watch can not be connected to two phones at the same time. So it will not be able to view notifications from two phones.

  What are your thoughts on this forum? Let us know by making this short film survey.

• Two screens DVI on Port Replicator II with Tecra S10-160

  Hello to all 2!

  Right now I'm working with two external 19 "TFT screens connected to the Port Replicator II (Tecra S10-160 inside with closed screen). A display is connected to the DVI port available, the other is connected on the available on the Port Replicator II VGA port.
  A single display (DVI) is used as the main office, the other (VGA) is used as office improved (both show different content).

  My problem is the poor quality of the VGA signal and the problem, my two new screens are only supported DVI.

  Is it possible to connect two DVI displays to the DVI - D Port Replicator II? I already checked several DVI-Y-cables, but I'm still looking for a solution connect two displays via DVI with the function to get two split screens and not the same content on both screens.

  Hope you got my point and have information or ideas for products for me.
  Thanks in advance.

  Hello

  Have you already tested a VGA to DVI? So, you can use the VGA connector on the port replicator and your monitor's DVI port.

  I mean such a cable like this

  Such an adapter you can always use the function to get two split screens and not the same content on both screens. :)