View search server connection what customer display is connected

Similar Questions

• Replica view 5 server connection

  Quick question for a validation test. I add a broker for the secondary connections to our environment from view as well as the documents that I read seem to indicate the replication server does not require its own SSL certificate, but this seems contrary to the purpose to have SSL certificates. The replication server has its own cert? Here is the doc that I am following.

  VMware View 5.0 Documentation Centre

  See you soon.

  The broker for the replica will need a certficiate SSL connections.   In our environment, we use SAN certs with the name of loadbalanced as well as the local host name.

• View replica server connection

  Hello

  I'm dealing with an existing VIEW 4 environment, I would like to add a replication connection server, installation of the replica server disrupt operations on the main server?

  Thank you

  It is a process without interruption of service.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Customer display 5.0.0 and compatibility view connection server 5.1

  Curently we run see 5.0.0 eviorment but we are planing an upgrade in 5.1 mode and I'm a little confused abut compatibility view 5.1 server connection and view customer 5.0.0.

  Here in this compatibility matrix, it seems that customer 5.0.0 and 5.1 server are compatible.

  
  And here, in this compatibility matrix, it looks like this only 5.01 client is compatible with Server 5.1

  

  So if I upgrade the servers to connect to 5.1 will be users with 5.0.0 customers still able to connect to their desktop?

  Best regards, Primoz

  Customer display 5.0 is compatible with the 5.1 server connection; However, the 4.x clients are not. That's what you see above.

• The upgrade of view 4.6 32 bits to display 5.1 64 bit on a new server

  Should I monitor when it comes to upgrading of view 4.6 on a Windows 2003 32 bit 5.1 server on a Windows 2008 R2 64-bit server? IM reading the guide upgrading, but shaped, I'd get an overview on the forum as well.

  What is involved in the transfer virtual machines and security\certificate to the new server information? We do not use composer or something like that.

  There will be no problems in the transition from 32-bit to 64-bit for an update here.

  My best recommendation would be simply to create a Server 2008 R2 64 bit and install a replica 4.6 Server connection pointing there on one of the servers of 32-bit connection. Then uninstall the login Server 4.6 on the 32-bit server. Once you have only left 64 bit server you can improve it to view 5.1. Then, you must have the old host names or if you want additional servers, you can run 64-bit with the correct host name versions and install them as replicas of the server upgrade.

  Backup of all components involved in a cluster of the view is always a good idea in case you need to restore at any time. With backups performed at the same time, you know that you will be restore on a consistent data set.

  Automatic backups of login to view server information should occur automatically every day at 12: 00 if you have not changed the default settings. You can check this under the display Configuration > servers in the servers connection. It must be a backup field, which should show the time stamp of the last successful backup. I believe that you can change these settings by selecting the login server to change, and then clicking on the button change.

  -Mike

• My adobe program tells me that it cannot connect to the DDE server?  What is my ISP or what?

  I try to open a PDF doc and my adobe program tells me that it cannot connect to a DDE server?  What is c?  I tried to download Acrobat Reader again and still get the same message.

  Arlene, isn't Adobe Customer Service, but a user to user forum. What you received was for free assistance from another user.

  And if your question has been answered, could you please mark as answer?

• I want to know what I need to look at when buying a router for 50 concurrent users, 1 server connection information

  Original title: router Question.

  Hi all

  not sure if this is the right place to post but I was looking for some information about routers. specifically, I want to know what I need to look at when buying a router for 50 concurrent users, 1 server connection information. specifications, etc.

  Thanks :)

  Some routers will define a limited number of simultaneous connections. Domestic routers rarely do because the assumption is that the environment will not include such a high number.

  Ideally in a commercial environment you would separate on the hardware connection since the hardware firewall. It depends on the type of connection (ADSL?).

• CC so that he was trying to install updates is unable to connect to the server.  What should I do?

  CC so that he was trying to install updates is unable to connect to the server.  What should I do?   This is what it looks like.

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• I need some help please (Horizon View Client can) do not connect to the server of connection, invalid key license server connection

  Dear professionals

  I am trying to connect to connect to the server via the Client view Horizon but when I enter the IP of the server connection I got the error message indicating that

  connection to the server was not a valid license key (see attached photo)

  everything has been installed and configured correctly, I added the vcenter Server view Portal administrator and I also added new swimming pool inside

  See administrator portal, but I don't have the login server license key.

  should I really buy the connection to the license key server? is there any version of the elevation of the connection to the server?

  Please help me

  Thank you

  naoufl

  Yes you need a license key to use the view of the Horizon, there is a 60-day evaluation license if you register here:

  Try VMware view Horizon: Access virtual office

• Unable to connect to view Security Server 5.0

  Use vmware view client build horizon 2.1.0 1213173 (ubuntu 12.04 64-bit), when I tried to login (local network), I got timeout message

  I can connect if server connection hollow instead of security server connection

  one mistake that I find on security server is 33, SideBySide error

  no errors not found on the page of the web interface of the login server events

  Here is the output of scan nmap from client to server security

  from Nmap 5.21 ( http://nmap.org ) 2013-11-06 15:13 MYT

  Scan nmap for view.cnc.net.my (10.1.1.20) report

  Host is (0.00017 s latency).

  Not shown: 988 closed ports

  SERVICE OF THE PORT STATE

  53/tcp open domain

  80/tcp open http

  135/tcp open msrpc

  139/tcp open netbios-ssn

  443/tcp open https

  445/tcp open microsoft-ds

  3389/tcp open ms-word-serv

  49152/tcp open unknown

  49153/tcp open unknown

  49154/tcp open unknown

  49155/tcp open unknown

  49167/tcp open unknown

  MAC address: 00:50:56:87:35:FF (VMware)

  Do not check everything again: you cannot log in because you can't solve. It can be solved, either replace the connection URL in the configuration of the IP address instead of FULL domain name, which I do not recommend since the certificate cannot be based on IP addresses...

  When you receive a message "Server (null)", it is because the server name cannot be resolved by the client. The reason why you configure server security <->Server with IP addresses tunnel connection is because they may not be able to resolve the FULL of the other domain name.

  The PCoIP gateway feature is enabled on the servers of your connection? It may be useful if you send us pictures of your configuration (security servers and connection)

• Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Hello.

  Today, I had the opportunity to work with a user of Muse with the same problem after you perform the troubleshooting steps in the post above we decided to communicate with the host.

  Later, I learned to know that host IP of the user of Muse and they managed to unlock and muse began to connect to the FTP host.

  I have another host scenario suggests Muse to add user : 21 to the FTP address and then Muse was able to connect.

  For example ftp.domain.com:21

  Please try the suggestion 2 above and let me know if it works.

  Concerning

  Vivek

• I'm a little confused on what view "Security Server" is...

  I configured a test of internal company environment VMware View 5.1 to access pooled VMs dedicated and linked clone of iPads.

  Now, one of the users involved in the test environment wants to access his VM dedicated outside of the office... But I want to be sure to provide a secure connection.

  I was a little confused with the VMware documentation, because I understand that VMware View 4 had another product/device to view security server to act as a gateway, secure to operate into DMZ network and enable access to the view connection server... I think so... But I find no such beast in VMware not downloads section called 'VMware View Security Server 5.1.'

  I'm in a bit of mess. My understanding on Internet clients see how external access to the server of company internal connection through the DMZ must be leaves much to be desired unless 5.1 view connection server itself has absorbed the activities of the Server VMware View 4 security and he is riding on the area demilitarized or well... Oh hell... I'm just confused

  Little help or a point in the right direction would be greatly appreciated!

  See you soon!

  Keegan

  To install the Security server that you use the same installer regarding the Connection Broker, its an option during the installation process.

  Linjo

• View domain for the server connection help please

  OK, I don't know where to put this so I hope it's a good place. I tried to install view connection server on my last windows 2003 server. I built a laboratory at home with a dedicated server for vCenter, AD and view connection. When trying to install view connection Server 4.5 sound telling me:

  "This computer is a member of a domain, but no server connection can be found. Please make sure that this computer is properly connected to a domain and that a domain controller is available before to perform this installation again'

  OK, so I logged on windows Server 2003 view connection using active directory so why it gives me this error?

  Thank you.

  Start by pingging your AD server's DNS server.  Also, try ping the DNS server of the virtual machine that you are trying to install the view on.  You can try it joined to the domain by using the command NET DOM.  We do in our environment at all correct control but can not quite understand our this is the problem.  You can also check the event viewer on the virtual computer to see if he throws all Kerberos events associated with the certificate expiring this testimony of course that the server may need to be joined to the domain.  The virtual machine was interrupted for a while?

  See you soon,.

  Chad King

  VCP-410. Server +.

  Twitter: http://twitter.com/cwjking

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Problem in installing VMware View Server connection

  Hello

  As the first step to install the VMware View Manager, I tried to install the connection to the VMware View server on a virtual machine to Windows 2003 Server SP2. This machine is added to a domain under our Windows Active Directory. I can connect to the machine using user accounts that are on the directory to active directory. My problem is that when I try to install the view connection server, I get an error message indicating

  "The computer is a member of a domain, but no server connection was found. Please make sure that the computer is properly connected to a domain and that a domain controller is available before to perform this installation again'.

  Because I can log into the machine using accounts in active directory, I assume that the computer is properly connected in the field. I also confirmed that there is a domain controller in active directory. I tried to do the installation under an account that has administrative privileges for the object active directory, but also a local administrator account. Could someone suggest where I could go wrong?

  Thanks in advance

  Concerning

  Varun

  You have validated that DNS and WINS are configured correctly on the server you are trying to intall the broker for connections on?

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• What customer VDM supports the CAC cards?

  I have the latest ESX and VMware View and vCenter installed as well.

  He is everything is configured such that I can present through the client discovers a couple

  Windows desktop computers and connect to them.

  However after creating a keystore and certificates required for the VDM server.

  and allowing chip card (even forcing him), I find that I can connect is no longer

  with the Client to display at all.   We're supposed to to bring up a dialog box PIN code when

  He sees a drive and a valid card, when the view is installed on ActivClient

  MiddleWare (as I have), but instead mine always just says: it can not

  connect to the VDM, because a smart card is necessary.

  I saw that in some document referring to having to use a VDM

  client which is not supported "Online desktop".   However, I do not know

  How called, what version, what it has packaged with or where to download

  he leave.  I would like to try it and see if the problem I have is with that,

  or something configuration, but I have no idea where to look.

  Someone knows something about it or have some ideas/suggestions?

  Thank you!

  The customer display Windows version 3.0 and later support smart card.  If you are not prompted for your card chip PIN then your server to view or your client connection is not configured properly to use authentication by certificate.  You did it for the view connection server, ensure that you went to ensure all the steps mentioned in the Administrator's Guide?  One thing people tend to forget (or spelling) is useCertAuth = true in the locked.properties file, as mentioned in the guide.  And for the customer, are you sure that set you up authentication by smart card properly?  To check if certificates are available for the customer to use, you can go to start > Control Panel > Internet Options > Content > Certificates > personal and view certificates.  When you insert a smart card into the reader, Windows copies the certificates on the local applications computer as the Client of the view can use them.