View slidelets and substitution of the connection

Similar Questions

• Model of Sony BRAVIA KDL 42W700B cannot view photos and videos of the external USB hard drive!

  Hey Sony,

  I recently bought the SONY BRAVIA KDL-42W700B model (http://www.sony.co.in/product/kdl-42w700b).

  The TV is recently launched by Sony, which made me buy this model.

  But the first day itself, I came across a problem with this model. I wanted to see some of my photos and videos, so I plugged my external USB drive (320 GB). I discovered this, he can not display my photos and videos in the directory view. He picked up any random photo/video to display from the hard drive.  In the thumbnail view, I could see of 27 items which were taken at random on the hard drive, and every time I connect it to the TV, I see some photos/videos at random that did not exist on the hard drive.

  Among the Options, button, tried to switch to view folders, but it also did not help. Only a few cases were projected, and that too not in any order, a few files randomly were chosen who have entered.

  Contacted the people at the showroom where I bought this TV and discovered that the problem was with this model ONLY. This model was taking too long (waiting at least a half hour load the photos and still did not get the pictures/videos in a correct view). They tested on various models (KDL-32W700B, KLV-40R452A, KDL-50W800B) and all these models supported the correct view and order, and he was also able to load the external hard drive fast enough.

  Apart from this, the bluetooth pairing happens not on this model. It seems that there is a serious problem with this model.

  In addition, contacted the people from sony who came to the demonstration and installation of the TV. Giving random answers to format the hard drive!

  Could you please help me on this? It seems that this model of Sony is defective.

  Hi arjun1610!

• Setting up Apple tv and stuck on the connection to the network screen

  Apple TV has tried to connect to my wifi.  He was slain on the connection to the screen of the network for 30 minutes.  No error message, just stuck.

  David, if, after checking your network on a different device - and assuming that

  your scope, that it still can't find your network quickly, I suggest you tv

  you restart.

  Tom

• Y560P card number: sleep mode and headset to the connected socket

  I searched the forum as much as I could and did not find this issue to be considered.

  So, sometimes I listen to music with headphones or even after a Skype call, I leave the connected headphones. If I put the laptop to sleep and wake it back up, unplug the headphones will not return my sound setting to speakers; I can't hear any sound if I plug the headphones in the back.

  I tried to connect and the new: no change. I tried to disable and re-enable "Realtek High Definition Audio" in the Device Manager: no change. Uninstall and reinstall it wouldn't be a good solution if it had to be done all the time. The only thing that it returns to normal is turning works again... typical I.T. solution. Is there a driver update to solve this problem?

  Speaking of driver updates, I guess that I can't find any BIOS update or updates to driver for the ideaPad due to the recall of Sandy Bridge?

  UPDATE: sorry... found the lenovo support site area sub consumer that is different from the IBM one... Argh...

  judge that?

• EA4500 and PS3 abandons the connection

  I had a router WRT54G2 and started having trouble with my PS3.  It would connect for a few minutes then she would lose the internet connection.  I thought that maybe it was the router so I have now from the EA4500.  The same problem occurs again.  I have all my other devices wireless connected to the EA4500 without any problems.  The PS3 will connect and connect and then two or three minutes, I get disconnected.  I called Sony and Cisco to help and they were not able to understand the problem.  The PS3 is showing that my network has almost 100% signal strength, so this isn't a problem.  If anyone has experienced this or can help, I would be very grateful!  Thank you.

  @2shibas

  Hello

  Is this connected by cable or wireless your PS3? Have some port numbers for Sony, so you can do Port Forwarding on the user interface of the router? If this is not the case, try to contact Sony and ask for the ports necessary for the opening of your PS3.

• Blur and expanded text and icons after the connection with Windows vista

  I have windows vista and when I turn on the laptop, the text and icons on the Welcome screen are normal, but after registration on the text and icons become slightly enlarged and fuzzy.  How can I get it back to normal?

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Homegroup and network cut the connection. Internet connection remains constant.

  I posted here once before and thought that I fixed it so I told everyone that it was fixed.  Of course I spoke too soon.  I have a very annoying problem with my laptop Win 7 and Win 7 office not being able to keep a home group or a network connection between them.  First of the installation program.  Both computers are Win 7 Home Premium.  The laptop is a HP and the office is a home built computer.  My router is a Belkin N + F5D8235-4 V2000.  So far, I tried to isolate the problem without success.  The Office has a G by US Robotics Wireless card.  I tried to download the latest firmware on their site, but it says that Windows will take care of all upgrades.   I thought that maybe that was the problem, so I uninstalled and put a new mark with the same results.  Updated firmware to update on the router and the laptop HP as well.  I use Windows with Microsoft Security Essentials firewall.  Any time I you change something it will work for about 10-15 minutes and die again.  Changes, I mean disable the firewall to change wireless channel, other random settings on the router.  But like I said that even leaving changes for awhile he still falls to the loss of the connection.  This is why I think I can exclude the firewall.  Tonight, I noticed that even if the two computers are online, nor shown on my routers DHCP client list.  I disabled DHCP on the router and the connection worked great for a while but my cell phone could not recover on the wi - fi network so I changed it back.  When I turned the DHCP on both computers customers showed up on top of the list.  It was like that in the last 20 minutes and my I am still able to access the network and the home group.  However, does anyone else have any other ideas? I am about to but a different router and see if it may be the problem.  I hope you understand what I mean.  Please let me know if you need more information.

  Hello

  The command IPconfig shows a configuration valid card wireless with IPv4 and IPv6.

  If the second computer has similar result and the homegroup is set up correctly. It should work.

  You keep talking on the network? Provided that you explained to the homegroup is now your network.

  I can't relate to the list of devices of Belkin, if both computers are getting a valid IP address, then this is the problem in the router.

  The following links have info on the repair of IPv6 (if necessary) and the residential group.

  --------------------------

  How enable or disable and fix the components of IPv6 - http://support.microsoft.com/kb/929852

  General help in homegroup.

  Group home-networking-the-easy-way - http://windows.microsoft.com/en-us/windows7/help/home-sweet-homegroup-networking-the-easy-way

  Group residential-recommended-links - http://windows.microsoft.com/en-US/windows7/HomeGroup-recommended-links

  Homegroup - frequently asked questions - http://windows.microsoft.com/en-US/windows7/HomeGroup-frequently-asked-questions

  Why can't I create a homegroup? - http://windows.microsoft.com/en-US/windows7/Why-cant-I-create-a-homegroup

  -----------------------

  The file-sharing issues.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• T42 - stop and restart after the connection

  My T42, running on Windows XP, suddenly stops right after the connection and while the hotkeys on the loading screen.

  A message in white letters on a blue screen starts like this:

  "A problem has been detected and windows has been suthdown to prvent from damage to your computer.

  IRQL_NOT_LES_OR_EQUAL

  If this is the first time you've seen this stop error screen, restart your computer. "If this screen appears again, follow these steps:

  And the product message points to check any new hardware or software installation. I have not recently installed a software or hardware, so I'm a little lost on how to proceed from here.

  No clue on what could be the problem or any recommendation, short doing a full recovery from a recent backup?

  Any help will be much appreciated. Thenks.

  = UPDATE =.

  After running a few tests using the blue Access IBM button and PC Doctor 2.0 running, memory tests have shown the following results:

  Fast memory - all sockets - failed

  Fast memory - Support 1 - spent

  Fast memory - take 2 - failed

  This seems to indicate that one of the two memory is faulty. This hypothesis is correct?

  If so, what should be the next step? My laptop is out of warranty. I should bring it to a repair shop, or could I order the replacement and install it myself easily?

  I am not versed in repairs to equipment and feel a bit discouraged to start to mess with storage media...

  Any advice, please?

  Thank you

  It is probably a faulty stick of RAM in the second location rather than the power socket. Best bet is to remove the module RAM then see how it goes.

  Second is really easy to access. It is under the laptop - there is a small door in the middle of the base set with a single screw. Remove the screws and remove the door to expose the RAM module. Pull the wire staples on the outside of the restraint SODIMM socket and the RAM module should appear and then remove. Replace the cover and try the laptop again.

  IF you must replace the T42 uses to off the shelf of a DDR SO-DIMM, PC2700 speed RAM - needs. Will take up to a 1 GB module in each socket. First is harder to do because he must remove the keyboard to get home. It is only 4 screws but can be a bit tedious for a novice.

  Edit: The instructions for IBM appropriate here: http://www-307.ibm.com/pc/support/site.wss/MIGR-46513.html

• How to remove the extension AM and substitution of the server

  Hello
  
  Can someone tell me please how to remove the possibility of existing substitution and expansion of the AM of the server.
  
  Concerning
  Swati

  Swati,

  You can remove the substitution using the API jdr_utils.deletedocument ('').
  The path will be as "oracle/apps/ap/xx/customizations/0/server /...» »

  Kind regards
  GYAN

  Published by: Gyan on June 3, 2011 19:28

• After upgrading from windows and reboot "diagnose the connection problem" rises and won't let me use windows until the removal of updates

  diagnose the connection problem

  You can try to uninstall the update 974455 that came out last Tuesday, removing it seems to have resolved other

• Color LaserJet MFP M277 dw Pro: Setup disk gives an error and stops before the connection to the printer

  Hello

  I try to install the printer 'Color LaserJet MFP M277 dw Pro'.
  By inserting the disc into the phase "installation preparation" is 96% and then stops and gives me the error.
  I use Windows XP SP3. It is always installed, but physically disconnected another printer hp (hp 2050).
  (I tried both to disable the antivirus that reduce to a minimal install, but the problem persists).
  Thank you

  Response thanks a lot.
  In the meantime, I contacted the Support of the Italy
  Who suggested that I try to update the driver.
  I downloaded the file "HP_LaserJet_M277_PCL6_Legacy_Print_Driver_14295".
  Automatic extraction and I launched and everything seems to work.
  (I still try to scan and fax if they work).
  Thank you very much.
  Thanks to your colleague Michelle with whom I chatted.
  Contact thank you for the support of Milan that I don't know the name.
  So, I can communicate the solution found.

• Time and calendar on the connection of the unit on CUCM

  Hello

  Today, it's Christmas and Friday, I configured delay on CUCM of identity week and holidays. However, today is Friday and holidays as well. Is there anyone who knows how to give a higher priority to route the call to CUC on CUCM vacation? When the call is transferred to the unit connection, I was faced with the same problem.  How to give a higher priority to route the call to wish holiday? In other words, when the day is the day of the week and holidays. Holiday will all first check that the days of the week on CUCM and CUCM.

  Thank you

  Eric

  don't think that there is adjustment to set the priority on the calendar, but if one defines a period of time with a date points, to this date, this period overrides other periods that are set on a weekly basis.

  consult the SRND for clarity on the behavior at the time of the period

  Behavior of time period

  If you set a period of time with a specific date, at that date, this period overrides other periods that are set on a weekly basis.

  Example of

  Consider the following example:

  • There is a time afterofficehours, which is defined as 00:00 and 08:00 Monday to Friday.
  • There is a time, newyearseve, which corresponds to 14:00 and 17:00 on 31 December.

  In this case, on 31 December, the period of afterofficehours will not because it is overridden by more specific newyearseve period.

  Timetables

  A calendar includes a group of defined periods that associates the administrator. Once the administrator has configured a period of time, the time period appears in Configuration window when the calendar in the list of available time periods. The administrator may choose a period of time and add it to the selected list of time periods.

  Note	After the administrator selects a time for connection with a calendar, the deadline is available for binding with other calendars.

  Once the administrator has configured a calendar, the administrator can use the window of the Configuration Partition to select the time zone of the original unit or any specific time zone to a defined schedule. The time zone selected gets checked against the calendar when the user places the call.

  The Time-of-Day function filter the CallingSearchSpace string in time settings defined for each partition in the CallingSearchSpace.

  After the time of routing is configured, if the time of an incoming call is within one of the time periods in the calendar, the partition is included in the list of partition filtered for the call.

  Examples

  You can set the USAholidays calendar as the Group of the following time periods: newyearsday, presidentsday, memorialday, independenceday, laborday, thanksgivingday, christmasday. The administrator must first configure the applicable time limits.

  You can set the time schedule library_open_hours as the Group of the following time periods: Mon_to_Fri_hours, Sat_hours, Sun_hours. The administrator must first configure the applicable time limits.

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/Admin/9_0_1/CCMS...

  VINET.

  -The rate of useful messages.

• Creating cloud blocked by proxy - how can I stop it popping up and throbbing for the connection?

  I work from an office of customers and their creative blocks proxy server cloud. They are not able to change it just for me.

  How to stop the creative cloud app popping up every five seconds (hyperbole... but not much) while I am in office, taking focus and nagging connect me?

  I have tried leaving the creative application of cloud, but it just re-loads a little later.

  Thank you very much for any help or advice.

  Thank you Patti-F.

  I talked with support and, unfortunately, it seems that the only solution - if possible - is to get the team managing the relevant proxy server to the white list the areas relevant adobe host.

  Unfortunately they won't do it for me so it's a creative cloud popping up every five minutes taking focus (literally - if I type in another application field se password will take focus) or an uninstall for the duration of my contract to the customer and a reinstall of my old CS4. I wish often for the old, the Meadow CC time - but this is getting boring.

• user and password for the connection with the database command

  Hello
  
  I need to connect to the control of the database but I do not know the password for sys and system users, please, could someone tell me the password?
  
  Concerning

  need to order prompt (windows)

  cmd > set ORACLE_SID = 'database_name '.
  cmd > sqlplus "/ as sysdba".
  sqlplus > alter user username identified by password;

  You can change any user password by above the command using sys as sysdba or / as sysdba.

• Scrolling Parallax of the top (bird's-eye view) view / resizing and virgins of the tasks

  Hello :)

  I thought this was going to be easy, but some problems

  Currently Im trying to do a parallax road scroll while seeing at the top, but there are some current issues.

  the 1st is that somehow after the second image out of the scene, there are a few white pixels that do not... and it seems that the speed of movement is == to the pixels that are not filled.

  And I think, just suppose that if I test it on as different sizes - screen it's a phone - ill get a few problems with the scaleX and Y and it will get enough ugly and cubes.

  I did ch by a tutorial or an example but there are only in the X direction as if you see a side view of the car like this

  134 http://Hub.tutsplus.com/tutorials/Add-Depth-to-Your-Game-with-Parallax-scrolling--active-2

  If the file SWF here

  http://www.stouchgames.com/APKs/road.swf

  Therefore, the current code that I have

  package  {
  
            import flash.display.MovieClip;
            import flash.events.Event;
  
  
            public class MainClass_road extends MovieClip {
  
                      protected var _road:road = new road();
                      protected var _road2:road2 = new road2();
  
  
                      public function MainClass_road() {
  
                                _road.x = stage.stageWidth/2
                                _road.y = stage.stageHeight - _road.height
                                addChild(_road)
                                _road2.x = stage.stageWidth/2
                                _road2.y = y - _road2.height
                                _road2.alpha = 1
                                addChild(_road2)
                                addEventListener(Event.ENTER_FRAME, everyFrame)
                      }
  
                      protected function everyFrame(ev:Event):void{
                                _road.y +=8
  
  
                                if(_road.y > 400){
                                          trace("zzzz")
                                          _road.y = y - _road2.height 
                                }
                                moveBackground2()
  
                      }
                      protected function moveBackground2(){
                                _road2.y +=8
                                if(_road2.y > 400){
                                          _road2.y = y - _road2.height
                                }
                      }
  
  
  
            }
  
  }
  
  

  and the FLA is here

  http://www.stouchgames.com/APKs/road.fla

  This is not going to work.  If you change the position of part of the route of the road there will be out of the scene, revealing part of the scene.

  to give the appearance of infinite scrolling, roads must have a height, at least, twice the stageHeight.  If you do not plan to use the infinite scrolling and want to only reach a maximum of 10 px then the roads must be 10 px heigher than the stadium.