Views of States, of memory and unloading

Similar Questions

• Using issue view file when you use mp3s on the internal memory and the memory microSD external

  (1) if I have folders of mp3 on the player's internal memory and on the external drive microSD memory, can I use the folder to view all folders on the 2 memorys simultaneously integrated on one list or do I have to go through the files on each memory separately.

  (1) if the answer to question 1 is Yes, then I would like to now if I can have on the internal memory and external memory records with the same name, but with different files and the player will display these folders with both files on the internal memory and the external.

  I want to know because I like to browse through the files, and if the internal memory is full, I wish I could add more files in the folders where the internal memory by making a folder with the same name on the micro sd, and I don't like to go through the files on 2 devices at the same time, just on 1 list.

  Help, please.

  Thanks in advance

  The Clip + Treaty internal and external cards in 2 separate sources, under the folder view (it is quite logical, when you think of him, and just as 2 separate cards on your computer).  And if you look at the 2 lists separately (again, just like on your computer).  When you view your files using ID3 tags, both internal and external map content is merged in 1.

  If you do not have to see 2 separate lists, you can simply keep most / all of your content on the map either internal or external (even by, if you were really dead set on it, for example get a 2 GB Clip + and then using 8 or 16 GB external with her new card).

• Can we load and unload the files in the run time?

  Can we load and unload the files in the run time?

  For example, there are four files named 'test1.h & test1.c' and another series 'test2.h & test2.c' (I have attached as an attachment to this post).

  test1.h contains the code:

  int variable; variable declared as integer

  test1.c contains the code:

  variable = 1; variable a value assigned

  test1.h contains the code:

  char * variable. variable declared as string

  test1.c contains the code:

  variable = "EXAMPLE"; a string that is assigned to variable

  So here, in this case can I dynamically load / unload first & second group files so that the same variable "variable" name can be used as an integer and string? And if so, how to do?

  Hi pa1majeti,

  You cannot simply consider that some code is loaded into memory or not: all code in a compiled application is permanently in memory unless you divide your application into DLLs that you dynamically load if necessary and remove if is no longer necessary.

  But as I understand from your description, you're better given the amount of memory occupied by the data (i.e. the contents of the variables) rather than the code. If this is the case, your only option is to allocate memory for variables dynamically and free it after it has been used. Now, even if this option is useful if you are using large networks of data, there is little or no effect on the unique variables.

  A final Council, given the huge memory installed on modern computers, are you sure you really need that extra work? I mean, the dynamic allocation of memory involves some additional precautions in programming: check the errors on each function malloc or calloc, check that the pointer is valid before each use, freeing pointers before reassignment in order to avoid memory leaks and so forth, so a balance must always be sought between the memory and the difficulty in programming.

• HP 550: updated hp 550 memory and cpu with the unconventional settings. is not ideal, but not other choice

  HI guys, I hope you can help or at least give a point in the right direction. I am a freelance photographer with a large part of the suite creative Adobe CS6. After a disaster of a week, I came home to find the motherboard on my editing station is fried somehow. I don't know what happened though I wouldn't put past my inattention of roommates.
  I'm desperate. I have to finish my current job until I'm able to afford to buy a replacement. So I have to rely on stop-gap measures, in desperation to finish my project, that are less than ideal, but so far are doing better than I'd hoped.
  Im a photographer, Capture One, Adobe Photoshop Lightroom, Adobe Photoshop and Premiere Pro are the go for workaholic applications that I need to work. without them I have no income. in order to have this machine run these applications,
  the machine I have left is an old hp 550 that was gathering dust in the closet. It was built for 32 bit Win XP and in no case is designed to run adobe products food pork I use, particularly of Lightroom.
  Unfortunately PS with Lightroom and first are 64-bit programs and LR and first are hyper threaded. so I did some research and with the help of the list of the utility windows 7 Advisor to upgrade instructions, I was able to get windows 7 Pro 64-bit to install and run.

  I know that this is not the ideal machine or the situation, but for a few weeks, I need to make it work.

  I really just 2 simple questions. First of all, I went to the HP technical support. but they were not useful. as the guarantee of the laptop are long gone, they would be not even polite and basically told me to shove off. Then on another forum, I called back and comes with a knowledge it all who constantly insisted on the fact that there was no way no how this pc could run 64 bit win 7, which i thought what am I seeing things? It works very well for 3 months. So I decided to come to you. your forums were useful on many occasions.

  Basically, I need this machine to run these programs during the next month or two, until I can buy a new machine.

  essentially, what I want to know, it's the motherboard support an upgrade of the processor? and if anything goes, what do you suggest as a substitute, given my needs? The Core 2 duo is the bare minimum of what I can limp with like photo/video rendering times are excessively slow.

  then I was talking to the support staff essential tech upgraded memory. and possibly set the bios to force to run 8 gigs of ram. They said that they have cold cannot find any version of bios that would make that possible, but only by forcing already run 64 bit, which has already allowed the pc to use the full 4 GB of ram, which was impossible in the 32-bit format. He suggested that I buy 2 4 gig modules such as 4 GB DDR2 PC2-5300 unbuffered NON - ECC, 1.8V 512Meg x 64 which can be seen at http://www.crucial.com/usa/en/memory/ct51264ac667 and try to install the full 8 concerts and see what would happen, saying that he had a feeling that I might get lucky. his logic is that the 64-bit system already open the ram limits and who knows, you can't make an omelet without cracking of eggshells! It seemed very optimistic. So, what do you think? It seems likely you because I love to work. or do you think the guy was a quack? and this whole endeaver is a waste of time and money?

  also, any other suggestions on how to time this month long storm that do not involve suggestions of buying new machines would be appreciated!

  so that you have accurate details below are my system specs.

  Hewlett-Packard HP 550 F05
  System serial number: CNU90716GN
  Inventory number: CNU90716GN
  Chassis serial number: CNU90716GN
  Case type: portable

  Windows 7 Professional (x 64) Service Pack 1 (build 7601)
  Install language: English (United States)
  Local system: English (United States)
  Installed: 04/08/2014-18:21:11
  Start mode: BIOS (Secure Boot not supported)

  Processor and b main circuit
  1.80 GHz Intel Core2 Duo processor
  cache of 64 kilobytes main memory
  secondary memory 2048 k-cached
  64-bit ready
  Multi-core (2 total)
  Not hyper-threaded Board: Hewlett - Packard 3618 KBC Version xx.xx
  The bus clock: 200 MHz
  BIOS: Hewlett-Packard 68MVU worm. F05 19/01/2009

  Readers of memory Modules c and d
  2320.47 GB drive hard usable capacity
  959.16 gigabytes of free disk space

  HL-DT-ST DVDRAM GSA - T50L ATA Device [scanner]

  Hitachi HTS543216L9A300 [hard drive] (160,04 GB) - drive 0, s/n 090108FB0200VCCPYM3B, rev FB2OC40F, SMART location: healthy
  ST1000LM 024 HN-M101MBB USB Device [hard drive] (1000,20 GB) - drive 3
  ST310005 USB Device [hard drive] 28as - 1 player
  WD 1600JS external USB Device [hard drive] (160,04 GB) - disc 2, s/n WD - WCANM2342148 4088 usable MB installed memory

  Slot ' DIMM #1' has 2048 MB (serial number 0000202 A).
  Slot ' DIMM #2' has 2048 MB (serial number 00004042).

  Thank you friends! I can't wait to read your tips!

  Jodie

  Here is the Manual:

  Repair manuals

  Unfortunately, the maximum configuration is a processor T5670 1.8 ghz and 4 GB of DDR2-667 memory, you already have. The CPU includes the 64-bit instructions is not surprising, that it can run Windows 7 64-bit. My best advice is to save your money for when you can get a real working machine. The only other likely to help is a solid state drive, you might use in the laptop and then also use the new computer that you intend to buy.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• Upgrade Alienware 17 r2, graphics, memory and SSD; heating system and stops

  I tried to find information on the upgrade from my old system of r2 to Alienware 17 with new graphics, memory and an SSD, but I've been to find contradictory information on it, and if I would still be able to upgrade my graphics.

  My current setup is:

  Computer model M17x

  OS version Microsoft Windows 7 Home Premium

  Processor

  Manufacturer Intel Core i7 CPU M 620 @ 2.67GHz

  Clock speed 2.7 Ghz

  L2 Cache size 256

  Memory

  Available memory 35.50%

  The file size of the page 10 048,7 MB

  Available Page file 85.84%

  Virtual memory 10 048,7 MB

  Available virtual memory 63,04%

  M1 2 048,0 MB

  M2 2 048,0 MB

  Network card
  Storage
  Material

  Type Description

  CD-ROM/DVD-ROM readers Optiarc DVD +-RW AD - 7640S

  Disc players ST9250410AS

  Graphics cards AMD Mobility Radeon HD 5800 series

  IDE ATA/ATAPI controllers Intel (r) 5 Series 6 Port SATA AHCI Controller

  Keyboards, mice & pointing devices Synaptics PS/2 Port TouchPad Compatible mouse HID Microsoft Hardware USB mouse Compatible mouse HID

  Monitors Generic PnP monitor

  Sound Devices IDT High Definition Audio CODEC AMD High Definition Audio Device

  USB controllers Intel (r) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - B 3, 34 Intel (r) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C

  First of all, the graphics card can be improved and if so, should I go with?

  Depending on the type of memory I thought to install is:

  Crucial Ballistix Sport 16 GB DDR3 - 1600 PC3-12800)

  I heard that 8 GB was supposed to be the max, but that was only because it was all that was available at the time, the system was released and that others have used up to 16 GB.

  It will work or is there another suggestion?

  Thirdly, the SSD I plan on installing is:

  Crucial BX200 480 GB SATA III 6 Gb/s 2.5 "Solid State Drive CT480BX200SSD

  Still, I read the system never was not originally designed to support SATA III but if you use BIOS version A09 it would work.

  Is that correct or suggestions?

  The last two things I was wondering was that the system overheat easily and stops, to rebuild the thermal paste on the CPU and heatsink help correct this?  As well as to clean the fans, of course.  Or are there other options I should look into?

  Anyone know where to buy a new adapter power for this system as well?

  Thank you in advance for any help you can provide me with.

  Hello.

  First of all I would like to ditch the 620M processor, it's i7 below, you can get and dual-core only, not quad.

  You should be able to find an i7 820QM at a reasonable price, these days, 920QM or 940QM would be even better, they were the fastest available for this model.

  Once you have upgraded the CPU to something on an i7 720QM you can upgrade you RAM to 32 GB at 1333 MHz with no problems, if you want faster than 1333 you need to adjust overclock settings in the system BIOS.

  You have two HDD slots, up to any size SSD 1 TB plug-and-play (or to the more require very few adjustments BIOS) Firmware may need to be updated but also that it should be OK, just stick with an alienware used as Samsung brand, and if you can get one from the SSD slightly more older you might save money , you don't need a model 'latest and greatest '.

  Upgrade your GPU in the M17xR2 model can be a pain, the fan control is terrible and to really improve and play safely, you should probably use HW Monitor, so you do not cook your cards.

  Memory the AMD maps are more lenient when it comes to bi - GPU - I think remember me some upgraded GPU not X shot or SLIing in this model, but now is earlier in order not to forget.

  The M17xR2 is a very popular model, with thousands of people, the GPU upgrade - you can having to sort through the garbage to find the jewels but the info you need should be available if you do a search on google

  NotebookReview Forum would be a great place to start, 99% of the info you need should be there, the other 1% proably will be on techinferno.

  Guilbert - I still think that the M17xR2 has been one of the best they have done...

• IRLQ_LESS_OR_NOT_EQUAL_TO 0x000000A then proceeds to run a physical memory dump, I also get something related to memory and then STOP 0x0000001A and 0x00000DE

  Usually when playing games, DOTA 2 and Battlefield 3, I get them more when im playing battlefield 3.

  Hello

  Don't forget to check with the support of game manufacturers and ask in their forums to see if there is
  known problems.

  ---------------------------------------------------------------------------------------

  Results verified BlueScreenView WinDBG / DumpCHK.
  
  The Bug_Check have been in 0a, 1A, 7, 50 and.

  When there is that much material different from Bug_Check is almost always involved
  at least some of the issues.
  
  1. remove ALL power and then reinstall memory cards and cables (at both ends, where possible).
  in fact, remove and replace - don't do not just tight. Clean the dust bunnies and ensure that fans
  work. Try adding a small fan blowing into the socket to reduce the effects of heat (heat
  related not always means excessive heat that something might be too sensitive to the same
  normal levels).

  2. test the memory carefully using methods in the troubleshooters below. Keep in mind
  This memory tests only detect all errors as the moment where there are tiny speed differences
  between the modules that appear to be identical. It is necessary to test the modules in
  various combinations and models.

  3 several of the Bug_Check showed CAUSE nvlddmkm.sys who, in the Nvidia video driver.
  Search for Nvidia updates. See the driver update methods in the resolution of the problems previously posted
  above.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  4 check system Maker (manufacturer of motherboard for customized systems) updates to the BIOS,
  chipset drivers low level and major of edge and separate device drivers. Use DriverView
  -Microsoft drivers hide the value VIEW - updated those without emptying in their names. (See pilot
  methods of update in convenience stores previously posted.)

  5. after updating the drivers run DriverVerifier as shown in the troubleshooter below.

  6 use other methods of troubleshooting in convenience stores posted previously and those
  below as needed.

  ===========================================================

  BCCode: 0a 0x0000000A methods as well as updates to driver and memory tests
  are in the resolution of the problems previously shown.

  ===========================================================
  
  BCCode: 1a 0x0000001a

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Make sure that the vents are clear and that the
  the fans are working. Even if the temperature is OK assume no heat does not affect the video,.
  sound or other system functions that it these get hot. Try adding a small fan blowing in
  the vents as a test. (These are especially for a PC not a laptop.)

  Have you recently added any hardware? Have you updated any drivers just before this started?
  (Check control panel - updates of Windows to see if all drivers have been updated it on the)
  This started the time) likely guilty hand are video driver, other great drivers, memory, and
  antivirus/antispyware/security products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when
  you get these sections and then back to the resolution of the problems according to the needs.

  BCCode: 1a 0x0000001a<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/memory-management-0x0000001A-* 1041.html? order = votes

  ===============================================================

  BCCode: 7F 0x00000007E who is also a 0x1000007E

  See these KB articles:

  "Stop 0x0000007E" or "Stop 0 x 00000050" error message in Windows 7 or Windows Server
  2008 R2
  http://support.Microsoft.com/kb/979538

  "Stop 0x0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED" error when the GPU is under
  conditions of heavy load in Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/983615

  References to Vista also apply to Windows 7.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ===============================================================

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated any drivers just before this started? (Check
  Panel configuration-updates of Windows to see if all drivers have been updated it there all the time it started)
  Main likely culprits are video driver, other great drivers, memory and antivirus/antispyware/security
  products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when you get to
  These sections and then back to the resolution of the problems according to the needs.

  BCCode: 50 0 x 00000050

  Cause

  The BCCode 50 usually occurs after the installation of faulty hardware, or in case of failure
  hardware installed (usually associated with a faulty RAM, be it the main memory, L2 RAM cache memory, or)
  Video RAM).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Solve the problem

  Solve a defective hardware problem: If the material has been added to the system recently,
  Remove to see if the error recurs. If existing hardware has failed, remove or replace
  the defective component. You must run the diagnostics of material provided by the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  Fix a defective system service: Disable the service and confirm that this
  resolves the error. If so, contact the manufacturer of the service on a possible system
  Update. If the error occurs during the system startup, restart your computer, and press F8 to
  character mode menu that displays the choice of operating system. As a result
  Windows Advanced Options, select last good known Configuration option menu.
  This option is most effective when a pilot or a service is added at a time.

  Solve a problem of antivirus software: Disable the program and confirm that this fixes
  the error. If this is the case, contact the manufacturer of the program about a possible update.

  Fix a corrupted NTFS volume:  Run Chkdsk /f /r to detect and repair disk
  errors. You must reboot the system before the start of the analysis of disk on a system partition. If
  the hard drive is SCSI, check for problems between the SCSI controller and the disk.

  Finally, check the system log in Event Viewer for additional error messages that might help
  identify the device or driver that generated the error. Disable the cache in memory of the BIOS
  could also resolve it.
  
  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  ===============================================================

  BCCode: OF 0x000000DE

  This is usually a driver issue then run DriverVerifier and check the drivers using the methods
  in troubleshooting below. Carefully check the memory using the methods below.

  BCCode: OF 0x000000DE

  Bug Check 0xDE: POOL_CORRUPTION_IN_FILE_AREA

  Bug POOL_CORRUPTION_IN_FILE_AREA control has a value of 0x000000DE. This indicates that a driver has corrupted the memory pool that is used to maintain pages to disk.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  POOL_CORRUPTION_IN_FILE_AREA settings

  None

  Cause

  When the memory dereferenced Manager the file, he discovered this type of corruption of memory pool.

  BCCode: OF 0x000000DE<-- read="" this="">
  * 1221.html http://www.faultwire.com/solutions-fatal_error/A-Driver-corrupted-pool-Memory-used-for-Holding-pages-0x000000DE-

  ===================================================

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  Start - type in the box search-> auditor/Reset hit enter to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Get-Cluster execution memory and cpu details

  I am writing a script to generate graphs based on average use memory and cpu during the previous month, but I'm doing it for each cluster itself without explicitly naming them. The graphic bit side (I use mschart or googlechart for this) I just need to get the actual statistics and it's the bit that I have a problem with because everything I see with my research pulls the individual information of the VMs or the hosts in the cluster.

  I am looking for two values in each case - the name of the cluster and average use. But the use of the average for the overall Group and not the indivdual VMs.

  I was watching this:

  script of PowerCLI to capture cpu usage statistics & mem

  But that you use hosts.

  I have attached a picture of something that I'm looking, red line on average in percentage and the blue line on average in megabytes. It has been exported from the vcenter however. I'm just trying to save time.

  Thanks in advance

  For a data point average per day, you can simply add -interval 86400 education Get-Stat:

  Get-Stat - entity (Get-Cluster Cluster) - Stat $metrics - start $start - finishing $finish - interval 86400
  Instance of MetricId Timestamp value unit
  --------                ---------                          ----- ----     --------
  CPU.usagemhz.Average 14.05.2014 02:00 MHz 4298
  CPU.usagemhz.Average 13.05.2014 02:00 MHz 4109
  CPU.usagemhz.Average 12.05.2014 02:00 MHz 4163
  CPU.usage.Average 14.05.2014 02:00 10,74% *.
  CPU.usage.Average 13.05.2014 02:00 10,27% *.
  CPU.usage.Average 12.05.2014 02:00 10,41% *.

  Note that it may not include the values of the last day, since the rollup database for daily statistics task has not yet executed.

• Memory and snapshot management

  Where can I find detailed information on memory and snapshot management in VMware workstation?

  Memory:

  • How memory is allocated in the host PC?
    
  • If I sart a guest VM with 2 GB of RAM with 500 MB of RAM on a host PC with 3 GB of RAM, the amount of memory is allocated on the host?
    
  • What should happen if I start more guest VM and the amount of memory is the memory available on the host PC?
    

  In summary:

  • How are managed snapshot all the view host to PC file system?
    
  • What is the role and the content of the files being created whenever I take a snapshot?
    
  • What is - that supposed to happen if I delete a file containing a snapshot (file, not the snapshot)?
    

  Concerning

  Marius

  • 1. how memory is allocated in the host PC?
  • 2. If I sart a guest VM with 2 GB of RAM with 500 MB of RAM on a host PC with 3 GB of RAM, the amount of memory is allocated on the host?
  • 3. what should happen if I start more guest VM and the amount of memory is the memory available on the host PC?

  • 4. How are all managed snapshot view host to PC file system?
  • 5. What is the role and content of the files being created whenever I take a snapshot?
  • 6. What is - that supposed to happen if I delete a file containing a snapshot (file, not the snapshot)?

  1. that costs on the settings in your config.ini file
  2. the host can use somethiong between 2200 MB and a few MBs - depends on config.ini
  3 the host said 'not possible' either the virtual machine starts - with extreme settings, you can allocate 5 x physical RAM available to your virtual machine

  4 and 5.

  vmsd-file = list used by the customer snapshots
  VMSN-file = settings and configuring the host when the snapshot was created
  00000*.vmdk = file does the actual data of the snapshot

  6. cannot be predicted: anything can happen: System can be will start more or healthy - so NEVER do this

  > Should I expect to use as much RAM on the host computer as the sum of memory configured all virtual machines of comments?

  again it depends on your config.ini file settings - if twist you config.ini for better performance, then the answer is YES

  a few good things to read http://faq.sanbarrow.com/index.php?action=artikel&cat=78&id=76&artlang=en

• How to monitor the CPU, memory and i/o on the system

  Hello..
  
  Some body help me?...
  
  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?
  2. how to monitor the CPU, memory and i/o on the system?
  
  TQ
  balleur

  In an attempt to partially answer your questions:

  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?

  Monitor the performance of the application from a commercial point of view. As transactions per minute, or response time or time elapsed for the key events of the company. Monitor the activity of the material such that the CPU usage is not necessarily linked to the performance of your application. Performance should be measured from top to bottom - business first, then the lower levels until you get finally to computer equipment. Only if you get a problem to the next level - response time is too large, for example - you can go through the lower levels to identify the cause and fix it.

  2. how to monitor the CPU, memory and i/o on the system?

  I personally use "sar" on UNIX-BASED or Linux, or rather "CFDCs" which is the system activity data collector. SADC will measure and collect data on activities on CPU, memory, disks, etc. and save them to a file in binary format. You can then extract these measures later for analysis using SAR (sar f sadc_file_name). The benefits of SADC are that it is light (these operating systems measure such things anyway, just CFDC records far), it records everything at once (with the exception of the network), it records the time stamp too for each measure, and you can analyze it later when you want to.

  There are commercial products out there too who do similar work, with additional features, such as the integration of Oracle and the relationship between several systems. TeamQuest is an example, but there are others also. (I do not work for TeamQuest, but I used their product in the past).

  John

• My calendar retains the events for a month, but when I look back over the past months, only recurring and default events are preserved.  I have a bad memory and I want that all events held on my calendar.  How can I do this?

  My calendar keeps events a month, but when I think back several months, only recurring and default events are preserved.  I have a bad memory and want to keep all the events, I put on my calendar for a year.  How can I do this?

  Go to settings > Mail, content, timing and you should see an option for synchronization. Make sure that you put in all the events if you want to keep past events calendar

  Alternatively you can also use iCloud.com to restore calendar events that may have been accidentally deleted

  If you've accidentally deleted your calendars, reminders, or contacts of...

  I hope this helps!

• I have an iMac OSX 10.8.5 2008 30.6 GHz Intel Core 2 Duo Processor with 4 GB 800 MHz DDR2 SDRAM Memory and 1 t HD

  I have an iMac 24 "Early 2008 OSX 10.8.5... 30.6 GHz processor Intel Core 2 Duo with 4 GB 800 MHz DDR2 SDRAM memory and 1 t HD.  Can I upgrade the processor speed and if so what.  Can I upgrade the memory and if so what.  I launched iPhoto ' 08 7.14.  Any input would be great.  Thanks for your help and suggestions.

  You can actually move the ram to 6 GB.

• How to take movies on my macbook air to free up memory and still access those I downloaded from iTunes?

  I want to free up the memory on my macbook air and have 65 GB of movies hogging the space. I don't want to lose them forever if you want to know how I can free up memory and again back to the film at some point in the future.

  If they were purchased through iTunes, you can download again them at any time.

  However, there is no way to stream movies, so you have to download the entire file again for a movie.

  Open iTunes > iTunes Store > purchased (on the right side of the window) > movies.

  Make sure that the sort is set to "Not in my library" If you try to redownload something that has been removed from the computer.

• I want to upgrade to El capitan, but need to 8 GB memory and now have only 4.  How much would it cost to add 4 GB of memory?

  I want to upgrade to El capitan, but need to 8 GB memory and now have only 4.  How much would it cost to add 4 GB of memory?

  It depends on what Mac model you have and is not possible for all models. Go to the website of OWC or Crucial and check.

  (141711)

• NB520, NB550D - how to set the volume to the State of sleep and music?

  I'm looking for an opportunity to adjust the volume to the State of sleep and the music...
  The mere fact that I noticed is that volume depends on the defined level when the computer was working. But how do I change the State of sleep and the music when the comp is off swich?

  Hi communication,

  I checked the user manual and found the following information:
  The volume control and mute setting may be different between the Windows mode and the mode of sleep and the music. Before connecting the audio device to the computer, turn down the volume of the audio device. Sound quality can also be different.

  So based on this information, you will need to adjust the volume in Windows, but it might be a little different. I have not found any information on the change of volume in sleep mode and music.