violation of synchronization non-diagramme

Similar Questions

• Timing NI5640R FPGA component non-diagramme compilation error

  I tried to rebuild the example NI5640R "ni5640R Template" without adding or changing anything.

  A timing error (see below), saying this requirement to 0.16ns, because of some non-diagramme components: /sDac0Reset, /aDac0Reset_or00001, /aDac0Reset. Xilinx options were set to "use recommended settings".

  I tried several times, always almost get the same result. Another example: requirements lack of 0.40ns, because of /sDacSimultReset, /aDac0Reset_or00001, /aDac0Reset. It is always with the recommended settings.

  Then I tried to compile with "Timing Performance" design strategy. 5 / 6 times compilation failed with violation of timing 0, 30 - 0.50ns.

  Then I tried to compile with the design strategy "Balanced." This time it didn't only 2 times on 6 with violation of timing 0, 02 - 0.04ns.

  I suppose that the use of the "Balanced" strategy works more or less, but maybe there is a better way to approach this? I have same useless CAD in my project, so maybe there is a way to exclude it?

  

  

  
  

• Compilation of SCTL loops

  I have a large application FlexRIO FPGA requiring mapping of the various sources of input running at 200 MHz. originally, we had a code that has conducted any mapping entry, but it was the code that had been parallelized manually (which makes quite complex) and had only two possible sources. I had to add a third possible source our code. Thinking that my understanding of loops inside of loops For SCTL was OK, I changed the design of an implementation of loop (attached).

  I think I know what a loop size For fixed in a SCTL would be held by the compiler (except all the features not supported as points of coercion or structures) not supported. With the attached design, my compilation is successful. However, when I add this loop to the rest of my code (replace a couple of controls with the registry items), I seem to meet Timing Violations of components non-diagramme. The values of x max being quite high during the compilation fails, I suspect that x is the cause of the failure.

  I tried a few different steps to try to get my design compile (including manually try to parallelize the loop For 4 loops, each 8-element arrays of automatic indexing and adding a step in pipeline before the result of the concatenation). Does anyone have any suggestions or advice?

  
  

• Impossible to define a synchronization (new sync key is ALWAYS invalid)

  When I try to configure my office firefox account, I always get a "BAD KEY RECOVERY" message on the Synchronize tab.
  Initially I used by key backed up, but it was not valid.
  Then I deleted the synchronized data account, account deleted, create new account.
  Just after setting up the account of new finish, every time after the windows that display that sync will begin soon, when I go back to synchronize the window that I ALWAYS find 'bad key recovery' message. I read most of the items of available synchronization, none has solved my problem.

  BTW, I agree that it should be a warning when you enable FIPS mode or when Sync is activated. It took me hours to understand the problem...

• WMP and the SD card

  The Sansa Clip + is my first mp3 player and I have already used WMP, either. I had implemented auto-sync with WMP. I quickly filled the internal memory of 8 GB and got a 8 GB card, and then continued to add music to my library in WMP. When I loaded the map in the Clip + and then connected it so it would synchronize, none of my too full of the transferred music.

  I'm confused about the best way to get music on the map, and then how to keep music organized. Should I forget about WMP and use slide / move? Do I have to turn off auto sync? If I use the manual synchronization, am I then going to try to keep trace myself of that music is in the internal memory and that is on the card? I love the Auto-Sync feature, and I would not if I don't have to turn it off.

  Thanks for any help you can offer.

  EM7 wrote:

  The Sansa Clip + is my first mp3 player and I have already used WMP, either. I had implemented auto-sync with WMP.

  We have heard that a lot. I'm sorry.

  I quickly filled the internal memory of 8 GB and got a 8 GB card, and then continued to add music to my library in WMP. When I loaded the map in the Clip + and then connected it so it would synchronize, none of my too full of the transferred music.

  No, it won't.

  I'm confused about the best way to get music on the map, and then how to keep music organized. Should I forget about WMP and use slide / move?

  Now you get the idea.

  Do I have to turn off auto sync?

  Good plan.

  If I use the manual synchronization, am I then going to try to keep trace myself of that music is in the internal memory and that is on the card?

  Yes, is it so difficult? BTW, even with automatic synchronization, you would still have to do. WMP is not smart enough to know what you want to put in the internal memory and what you want on the card. You tell her. And no, it will not automatically (despite the name) fill one, then switch to the other.

  I love the Auto-Sync feature, and I would not if I don't have to turn it off.

  You are better off without her. It is nothing else than to headaches.

  Thanks for any help you can offer.

  Forget about WMP. Forget the MTP mode. Forget the synchronization. Drag & drop the files you want where you want.

• Re: oracle 10g ocp review tipper

  Hello
  
  Can anyone provide me with the discharge of free oracle10g ocp review?
  Its very urjunt
  
  
  Concerning
  Sandy

  user13100082 wrote:
  Hello

  Can anyone provide me with the discharge of free oracle10g ocp review?
  Its very urjunt

  Concerning
  Sandy

  Dear Sandy

  It is not permissible to use free dumps.

  Why should I stay away from Braindumps?

  -You can lose your Certifications
  -You can be banned from all other exams
  -You won't get their use
  -You will be caught if you use braindumps, it is only a matter of time
  -Braindumps are a flagrant violation of the Non-Disclosure Agreement certification
  -Braindumps impede your ability to learn the material
  -If you have advance examination questions, you will be less motivated to learn the material
  -L'information is of bad quality, at best and is not reliable
  -L'information is often old and obsolete
  -The claim "real test questions" is rarely true
  -The information provided in braindumps are just information that might remember
  -If you have ever searched or asked braindumps, there are records of it
  -If you have ever spent for disposal of others, there are records of it
  -Sources from landfills are incompatible
  -Braindumps are not teaching you how to solve problems that are normally visible in the it field
  -Braindumps hurts everyone around you
  -Braindumps devalue attestations that competent scientists have studied so hard to achieve.

  Source: http://www.certguard.com/braindumps.asp

• iCloud Drive on my mac stops the synchronization of non-standard files

  In my iCloud account, I created two folders (individuals and businesses) in addition to standard folders.  Standards are iMovie, Keynote, Numbers, etc.  On my MacBook Pro (OSX Yosemite V10.10.5), these non-standard files synchronizes any more.

  A solution is to disable iCloud drive, and then restart, but the problem is recurring.  In addition, it is a lot of your time, because whenever I turn it on, it deletes all of my computer and you should download again on restart.

  Is there a solution to this?  Non standard folders are not supported?

  BTW: The iCloud drive on my Windows PC works perfectly...  Hmmm

  Have you tried the signature to iCloud and then reconnect?

• Synchronization of store non-iBook on iPhone 5s books

  I added a few pounds to store non-iBook on my rMBP (10.11.4) yesterday. I use iCloud drive widely and on my iMac (10.11.4) these non-iBook store books was pointing without problem, but not on my iPhone (iOS 9.3) 5s. I checked all settings, I'm using the same Apple ID, but I do not know why do they not appear on iPhone through syncing iCloud 5s. I tried to use iTunes to sync these books o iPhone 5s (iOS 9.3), but surprisingly even iTunes will not show the two. I wonder what's going on and someone a suggestions to solve this problem?

  As it turns out is not as capable as OS x iBooks on iOS...

• synchronization is slow to non-existent on the Tungsten e2

  I have the original desktop on a WinXP installation software, and for awhile, I forgot that this is. I was always sync my e2 on my w7 laptop, with the new version of ACCESS of Palm Desktop and ACCECA drivers for the USB docking station.

  I rediscovered my Palm desktop on the XP machine and rememebered it kind of "disappeared" for awhile it is because I've been logging in as a regular user, and Palm Desktop does not run unless I connect as long as administrator (and no, I can't use "run as" for Palm Desktop).

  I tried to sync as an administrator on the XP machine, and it's been syncing my calendar for hours, now. Certainly, it must have been 1-2 years since my last sync on XP, but I still think it shouldn't take 2 hours (and more) for the synchronization to occur. The application doesn't seem to be suspended, if the icon animated showing the synchronization is any indication.

  Any ideas? I have to leave this installation of Palm for the dead?

  Synchronization problem has been somewhat fixed in W7 by go to HotSync settings, by clicking Applications, unchecking Agenda, address book, task list, and Notepad.

  Duplicate entries are still there, and what has happened is that the rest of the Palm sync, and unchecked items do not have. So, I left only Agenda unchecked, and so the rest of the Palm sync, except the agenda.

  So, the problem has been isolated to the only Agenda. Now, I tried "Replaces Desktop" and he hung up. If I try the reverse operation ("overwrites handleld"), I know I will lose data. This is because when I uninstalled last Palm Desktop, I deleted the files when I should have just backed up their. Rash skin decision here, but I first suspected corruption on my desktop files. Because he gets caught, my only choice now was to execute "Desktop replaces handheld" an agenda for the most part empty, rewriting years of former times.

  The Agenda worked well on the Palm, but now I can't sync. Without a backup on the desktop, I have myself screwed in this recent updates will be lost. I went through each element of planning, dated in the future and they are entered manually on my Palm Desktop. After this event, I felt better to lose the old data on my Palm when I hit now updated.

  When I did, all set to update as expected, so in hindsight, the book Date file was corrupted on the tungsten. Update of the old appointments TI started badly, but meh, at least my future appointments has been backed up, and then I put HotSync to its normal settings (synchronize files) and now is more suspended.

  All an adventure and almost screwed myself a couple of times, but now evrything seems to be better.

• Can I synchronize compactDAQ and cards for the generation M Series DAQ waveform continues non-regenerating in RT

  Hello

  I use a M Series DAQ card (6229) multichannel and multipoint make reading and writing of waveforms, all synced to a clock generated on the 6229.  Now I need to extend that to a "remote" (10 m) location and I was planning to use the Ethernet (9188 or 9184) CompactDAQ chassis or maybe 9144 Ethercat slave.  Before I have buy and learn the hard way, I thought I would ask some advice:

  My questions are:

  (1) using the DAQmx can I access the IO on 9184 or transparent 9144 using a multichannel multipoint DAQmx task as I do for the PCI 6299 card?

  (2) are all of these chassis supported if I use RT on the host?

  (3) is the best way to synchronize and trigger the remote system to the host using a digital line between the 6229 plug-in and the chassis from a distance, and if so, how can I connect it to the chassis and set it as a sample clock?

  Any help would be appreciated.

  Hi AnthonV-

  You make perfect sense.  And, I am pleased to report that you can program your analog output task CompactDAQ to use a clock timed by material, like your M Series device.  In fact, it is possible (and perhaps even likely) that the same code of OR-DAQmx you use for M-series can be used directly on CompactDAQ also long that the AO, relaxation and sources of timing and similar channels can be updated to point to your CompactDAQ chassis.

  As I've mentioned before, please note that only the CompactDAQ USB chassis (except the cDAQ-9172) are compatible with the PharLap LabVIEW RT objectives.  I don't know if this will meet your needs for a > extension of 10 m from the host system.

• Captivate 8-objects have staggered timing on the timeline. Preview or publish mode, NONE of my delayed synchronization objects appear. Help!

  If someone has encountered this?

  Rick fixed!

  I had inadvertently changed the action sign up for this slide on 'pause' rather than 'no action '.

  Thank you very much. A simple solution that has been plaguing me everyday!

  I'm sure you'll see me once as I try again to create and use triggers and conditions!

• IPod Classic 160g shows no music after synchronization.

  I tried reformatting and restoring. Sometimes I can get a few albums will appear on the ipod, mainly purchased itunes music. Almost none of my CD from my library will not work. It's maybe a hard disk problem. I just want to have some opinion or if someone could have the same question. It started after making the mistake of syncing with itunes after the last update. Forgive me for wanting to add new music. Here are my stats hard drive...

  Retracts: 9

  Reallocation: 16376

  Sectors pending: 0

  PowerOn hours: 143

  Start/stop: 47707

  Temp: current 29

  Temp: Min 5 c

  Temp: Max 56 c

  Do not know your stats, but it is not specifically a drive problem hard if your iTunes Store purchased songs to the iPod and your CD songs imported synchronization are not.  iTunes doesn't care of the original source when it syncs the songs.

  Do you use the method to Manage manual (drag and drop songs on iPod in iTunes) or Auto Sync (setting synchronization music )?  You get an error message after synchronization?

  Find one of the songs that will not sync to your iTunes library.  Make a right click on it and read the information.  Tab Info to file window, browse to the location.  It shows a file path to its location on your disk, or does it mean something else there, like iCloud.  Depending on the configuration of your iTunes, it is possible for you to access your songs streaming from Apple servers ("iCloud").  But to synchronize the songs on your iPod, your files must be stored locally on your disk.

  If this isn't the problem and/or your iPod hard drive is defective, you can consider to replace flash storage, in the form of widely available card compact flash or a card SDXC, on an adapter.  The 5th generation and later "classic" iPods, this website contains relevant information.

  https://www.iFlash.xyz/

• Photos on macOS Sierra: Album of peoples does not synchronize with iCloud photo library

  Using Photos has just been updated for Sierra, and we finally have it in writing:

  https://help.Apple.com/photos/Mac/1.2/?lang=en#/phtf5e48489c

  Note: Persons identified in the album people are not synchronized between devices.

  And as far as I know, it really does not synchronize between my libraries of Photos on the MacBook Pro and my iMac.

  It's different in the 10 user guide iOS for the iPhone and iPad:

  http://help.Apple.com/iPhone/10/#/iph9c7ee918c

  People are synchronized between devices where you are connected with the same Apple ID.

  I wonder how this is supposed to work, if a Mac and iPhone are synchronized with iCloud User Library.

  None of the faces that I named on my iPhone did sync it with my Mac.

  Another indication that the lack of synchronization of the people and names is deliberate:

  This document has now also been updated:

  Use iCloud photo library on several Mac - Apple Support computers and Photos

  https://support.Apple.com/en-us/HT204486

  After have connected you, these items appear in the Photos app on all your Mac computers:

  • All photos and original videos
  • All folders and albums
  • Smart albums
  • Keywords
  • Memories
  • Key photo selections

  He used to say, tags searchable faces will perform synchronization between devices, but the tags are more is mentioned. Now we have the 'memories' instead.

• iOS 10 - auto bluetooth with contact group synchronization

  I have my iPhone 5s coupled to my car bluetooth hands-free system.

  With iOS 9 I was able to sync only certain groups of Contacts from iPhone. It was helpful that I have a number of groups in iPhone Contacts, including one specially created for syncing to my car.

  Since the update of my iPhone to iOS 10, I have that option in the bluetooth settings of the iPhone to check any combination of 'Favorite phone', "Phone Recents" or "All Contacts". None of them are useful for me as I want to synchronize with one of the original groups in Contacts.

  Help, please!

  Thank you.

  The same problem. A month ago I could synchronize specific groups with the phone book from my car. Now, the only option is "Contact".  Help!

• Pod drives, Nano, synchronize, through, melodies, for, nike, more.

  I have been with this problem as well for almost 3 months now. my nano allowing everything through iTunes in sync with no prob to nike. now I don't even have the link for nike, which appeared in iTunes. and I have an error message that says: "iTunes has not to connect to nike +.» you don't have permission to access the resource request.

  now, I like 42 workouts, I want to sync and I can't. I went into the apple store and ask for help from nike. None of them helped me. IM really frustrated right now. don't know what to do.

  Hi caroa2,

  Please let us know on the issue that you are having synchronization of your iPod nano with nikeplus.com.   The resources below will help solve this problem.  The first step is to identify what the iPod nano model you use.  Then, make sure you have the latest version of iTunes installed on your computer.  Finally, contact the support for synchronization with their Nike service.

  Identify your iPod model

  Nike + iPod

  Sync

  When finished your course, your iPod touch or iPhone wireless sends your workout data to nikeplus.com wherever you are on the road. With iPod nano, your data is sent to nikeplus.com when you connect it to your Mac or PC. Go to see all your completed runs and share motivation with runners across the world. Learn more about synchronization

  Nike + iPod - stay synchronized

  If you walk or run with iPod nano, workout data are sent to nikeplus.com when you connect it to your Mac or PC.

  Nikeplus.com keeps stats on each of your steps. Its intuitive interface and great graphics make it easy to see and remember every series and every workout. It helps to track your progress, analyze your performance, break your last record and see how much more you want to go. And you can check your speed, distance and calories burned - by race, by week or month.

  Nike + iPod is compatible with iPod nano (3rd generation or later), iPod touch (2nd generation or later), iPhone 3GS, iPhone 4, iPhone 4 s, iPhone 5, iPhone 5 s and 5 c. Not compatible with the iPhone 6 and iPhone 6 Plus.

  The link below will put you in touch with support of Nike.  Click the link for the iPod model you have (7 generation, generation 6 or generation 1-5).

  How can I set top Nike + iPod on iPod Nano

  Note: you have to fix your iPod nano in iTunes and running the version of the software before you start. If you need help setting up in iTunes or install the software of your iPod, visit Apple's iPod support page.

  Enjoy your day!