Virgins of the Microsoft Web sites

Similar Questions

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• After format and install Win XP Home and SP3 why can't open the Microsoft web sites?

  Need help, guys

  I had to replace my HARD drive in my computer. I installed my Windows XP Home SP2 disc. After installation, I used my SP3 upgrade drive and my drive to upgrade to IE8. After you install all my drivers, I tried to get Windows dates and discovered that I could not access the Microsoft web sites. I get Internet Explorer cannot display this page. I tried to find out why this is happening and how to correct the situation, but have not found an answer that works yet. Can someone give me an answer to this question.

  I have another (used) computer that I formatted the HDD installed and on Windows 7 and have had no problems to access the Microsoft web sites on. It uses the same modem cable like the other computer so I guess that everything is ok with my Internet connection. This problem seems to be only with Windows XP Home SP 3.

  Think in advance for any help

  Btk (billy the kid)

  Please do not share in the whole "BOLD". Which makes it hard to read!

  Please check that SP3 is installed:
  Start | Run
  Type:
  winver
  Press OK.
  Also, tell us what you mean by "trying to get Windows dates" since there are two ways to do this!

• Windows XP Professional installation with SP3 OEM CD applied but updates from the Microsoft web site does not-2011

  August 22, 2011 I just do a fresh install of Windows XP Professional formatting the hard drive. I then applied SP3 for an OEM CD, I bought from Microsoft several years (part number X 14-60166-02). Even if it is now at the level of the SP3, the automatic updates from the Microsoft web site will not work. If I bought the latest version of the SP3 CD-ROM, which will be the same as what I have now, or it will integrate all of the fixes that have taken place in recent years? Thanks for any help on this.

  Run SFC/scannow

  File system (CFS) auditor checks that all the XP files are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and check the integrity of the XP system files with System File Checker: SFC/scannow

  http://support.Microsoft.com/kb/310747>

  08/22 / 1104:49: 20:00 UTC

• Computer does not start up___Can I download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

  My laptop does not start at the top. It indicates that the following file is missing or damaged WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  Download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

  See if anything here helps-

  How to recover a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  See also

  How to Troubleshoot Registry Corruption issues
  http://support.Microsoft.com/kb/822705

  How to fix a missing or corrupt Windows\System32\Config\System file
  http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htm

  TaurArian [MVP] 2005-2010 - Update Services

• On the MIcrosoft Web site, when I put my product key, they say that this license is already in use, and I have to ask the manufacturer of PC

  Original title: WINDOWS license

  Hello everyone.

  Ive broke my PAvilion G6 core i5 laptop and now I'm going to change the internal hard drive. How can I use my old license of Windows 7. On the MIcrosoft Web site, when I put my product key, they say this license is already in use and I must ask the manufactor PC.

  I thank in advance for which will help me!

  Hello

  Or you can also borrow the same exact retail edition DVD of Windows 7 and use your product key to reinstall.

  The COA sticker with the product key is either or in the battery compartment on the underside of the laptop.

  With a desktop computer, it's on the side, the back or the top of the computer case.

  

  If you have problems with Activation:

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

  See you soon.

• Lost my copy and I tried to download the iso from the Microsoft web site, but my product key will not validate, pass this message: we had a problem with the validation query

  Original title: error Windows 7 installation files

  I bought a copy of Windows 7 at Tiger Direct on 22/05/2014.  I lost my copy and I tried to download the iso from the Microsoft web site, but my product key is not valid.  I get this error message

  We had a problem with the request for approval.

  FAQ

  See for other directions:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

• I can reinstall Windows 7 from the Microsoft Web site free of charge, or I have to go buy Windows 7?

  I have a HP laptop about 3 years. I don't have the disks with it to reinstall.  I have trouble starting up. Best Buys geeksquad says to reinstall windows 7.

  If I can get on the internet can I reinstall from the Microsoft Web site free of charge or I have to go buy windows 7.  If I have to buy that I would be better off to buy windows 8?

  Original title: reinstall Windows 7

  Hello

  Welcome to the Microsoft community!

  You can either reinstall the computer, which means it will have ANYTHING to this topic, or you can do a system restore when it was working fine.

  http://Windows.Microsoft.com/en-GB/Windows7/products/features/system-restore

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01867418

  I hope that the above suggestions work!

  See you soon,.

  Leo

• Windows Media Player is not installed correctly and must be reinstalled. You want to install the Player from the Microsoft Web site?

  Running Windows 7 home Premiun 64 x. Click to open the program the message pop up "Windows Media Player is not installed correctly and must be reinstalled. You want to install the Player from the Microsoft Web site? "that it takes to the site and there is no available media player Windows 7, installed WMP 11 does not work either. Tried to turn on and back on... did not work

  Do you remember the last time that your Media Player worked properly?  You can use the system restore (type it in the start menu to find) to go back on this point.  This restoration takes about 2 minutes and will not affect your files - no matter how far you go.  It simply restores your system files and settings.

• Is it possible to download an image (.iso) of the operating system from the Microsoft Web site?

  As I've already bought the computer with the operating system installed on it and apparently I have not received any CD of the OS with it. But I have the ID of the product on the computer... is there a way where I could get a copy .iso of my operating system on the Microsoft Web site?

  Thank you!

  On-site upgrades are not well regarded by some contributors of this forum, including me. However if you want to try, I refer you to this link for an iso download...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/where-do-i-download-a-new-Windows7-Home-Premium/39547f65-5a91-4608-A439-c4ccaed1de56

  But before you go this route, I would say as you explore the possibilities to fix the problems you have in other ways. Try to publish or questions about your problem and see what happens. You can save yourself a lot of grief.

  Tricky

• Cannot access the microsoft Web site using any browser

  Access Web sites

  Try all 3 browsers... Chrome IE7 and Mozilla. I can't to any microsoft Web site. No problem to do anything else.

  With Chrome... I get OOPS! and an error message. IE7 displays a page similar to AI "browser down" page and just microsoft

  sites.

  Thanks for any info

  I can't to any microsoft Web site.

  Sounds like a DNS issue.   Use nslookup to check.   Use ping n 1 w 1 to attempt to cache a browser search.  Use ipconfig/displaydns to check if the search is cached.   A problem with many Microsoft research is that they have several alias and have very short life values.   It is very difficult to take any advantage of cached searches.  An alternative is to substitute the search using your HOSTS file, but then the IP addresses of host Microsoft tend to be transitory.  In fact, this point suggests something to check first: make sure that there are no replacement of microsoft in your HOSTS file.   Remove them and do an ipconfig/flushdns, if there is.   ; )

  HTH

  Robert Aldwinckle
  ---

• I'll be able to pre-order the Microsft Surface soon or I can now on the Microsoft Web site?

  ^^^^^^

  Windows 8 will be available October 26 and you see new devices, including Microsoft Surface during this period. Avaliability might differ from one country to the other.

  You can consult the Web sites during this period to check if it is available during this period.

  In addition, you could check Microsoft Store in Australia:

  http://www.microsoftstore.com/store/msaus/en_AU/home

  When the surface becomes available, it will be there to order too.

• VHD for evaluation of Windows Server 2008 R2 not accepting not a password on the Microsoft Web site

  Hello

  I recently downloaded and installed Windows Server 2008 R2 evaluation VHD on my Hyper-V using the link below.

  Title: Windows Server 2008 R2 Evaluation VHD for Hyper-V Images (180 days)

   

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16572

  However, every time I get the username and password as "Admin" & Pass@word1 mentioned in step 12, in accordance with the instructions, that I get the error message below.

  "The user name or password is incorrect"

  My data from the computer

  Operating system: Windows 8 Pro

  The use of Hyper-V

  Can someone help me?

  Hello

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

  I hope that helps!

• Cannot install x 86 kb2729450. Cannot find the installation on the microsoft Web site. Unable to get any help from Microsoft, if it is valid. I have window xp OS

  I have Windows xp OS.  Installation is underway for about a week. Don't know if the installation is a valid installation of Microsoft.  Ran a virus/malware scan etc. and negative.

  Hi John,.

  Thanks for posting in the Microsoft Community.

  I understand that you can not install kb2729450.

  Before you start the troubleshooting steps, I need the information required.

  1. you receive an error message?

  2 are you able to install other updates to windows correctly?

  3 did you changes to the computer?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2:

  I suggest you of for windows update issues, visit the link.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  Cannot install Windows updates

  http://support.Microsoft.com/kb/555461

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 3:

  Security Update for Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35692

  See also:

  MS12-074: Description of the update of security for .NET Framework 2.0 Service Pack 2 on Windows XP and Windows Server 2003: 13 November 2012

  http://support.Microsoft.com/kb/2729450

• My attempts to search for files and folders in My Documents, following the instructions on the Microsoft Web site, do not have (no 'result' list appears). Can anyone help?

  The site says to type the name of a file or folder in the box search to start or the libraries search box.  Produces no result.  Is there something I can do?

  Hello

  See if the solutions posted in this thread will help.
  Windows 7 in the Explorer search function does not work - Microsoft Community

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Windows-7-search-function-in-Explorer-does-not/515c9769-6aa8-4F33-8d05-6286d6770b1d
  "Windows 7 search will always return no results"

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/a7e6c315-bfa6-4e7d-888d-a2c7d8de560c/