Virtua tennis 4 do not run, stops working

Similar Questions

• Error message: MS office click-to-run stopped working and laptop keep freezing.

  I have a Samsung laptop, RV515 (1.65 GB and 4 GB of RAM, 500 GB) running on Windows 7 and MS Office 2007 Academic.

  I got the message 'not only respondents' for a long time, but they became more frequent, especially in Internet Explore but then also in Google chrome and Word. Then, I installed MS office 2013 and updated Norton in the same week and got a lot more message "not responding". I also downloaded a program that converts Youtube videos in files.  So I defragmented which took about 14 hours and a complete analysis of the system, which was another 9 hours. The laptop was faster that he had never been but then after a few days started to freeze in almost all programs. CLT-alt-del screen stopped appearing. I did a lot of system and controls maintenance, who says super fetch couldn't run, but everything else was okay. I tried a number of time to start to look great but every time I check it is said that it will not start.

  My Norton live-view disappeared at the same time I downloaded the Youtube converter (see above) so I deleted Norton in safe mode and rebooted, but it didn't reappear. Then, I thought that I should delete all parasitic programs that my son downloaded so I deleted a few games and Youtube converter, but also ' ETDware PS/2-X64_WHQL' thinking that was a game too! In any case, my laptop has complained and reinstalled.

  I have tried reloading MS Windows 7 and had this message: windows can not retrieve information about the disks on this computer.

  In safe mode Office Professional 2013 does not open, but the fact of MS Office 2007. So I tried to repair Office Professional and I got this message: click on MS Office to run has stopped working.

  Anyway, my current position is that my computer starts normally but which icon I click on (even the start ORB), it sends the hourglass spinning and the screen freezing. A few times I was able to open a program, but is that I get.

  I am not an expert as you have no doubt worked and have messed with it much too now and are out of options. Help someone?

  Hello

  1. How do you reload Windows 7, using repair disk or drive back?

  2 are conducting an update install?

  I suggest you perform a chkdsk and see if it helps.

  Check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Internal microphone will turn not on/stopped working... help

  OK... so The Interal Mic has stopped working - it will not record audio in videos or recordings. It is not the PC speakers because they work perfectly. The internal MIC is on & I also never used any other USB Mic.  Another thing, I tried Mic TROUBLESHOOTING - no problem was detected.  There also, the Mic light (red) when the Mic works does not turn on either.

  I sometimes wiped the computer area webcam & mic with a not-very - wet cloth could... which might have damaged it?  I bought this laptop - about 2 years ago and it stopped working for a few months.

  @DarkestMidnight ,

  Hello and thanks for posting back with this information.  Yes, it's perfect.

  So what you may have been a problem here is that the internal MIC is connected with the webcam.

  A lot of times on computers cell phones because of the way the cable is routed through the readjusted screen, they can be removed when you close the screen causing it to loosen it enough to make the microphone to fail.

  Here is a link to the maintenance and care guide.  It will show you how to access the cable to make sure that the connection is still strong.

  Maintenance and Service Guide

  This is a video that shows how to replace the screen, and you can use this to access the connection of the webcam and the microphone.

  HP Pavilion Notebook replacement screen procedure G7

  I would like to know how this goes for you.

  Thanks again for posting and have a great day.

• Internet Explore has stopped working - question of the biometric authentication service

  My Elitebook 8540p has developed a problem where I get the error message - Internet Explorer has stopped working... Turn it back on.     I am running Windows 7 32 bit.   And using IE9.

  After some internet reading, I started my services of neutralization.    I finally got down to a service that is causing the problem.

  Biometric Authentication Service Digital Persona Inc.

  When I disable the service in the services of the MSconfig System Configuration and reboot, I use internet explore without any problem.    (I've identified some Web pages which would agrivate the question.)

  The deactivation of the Service of Authenticaton of Biomitric causes the scanner to not work.     I tried to reload the driver for fingerprint reader, and the HP Protect tools Security Manager.

  Any idea how I can activate the biometric authentication Service and not IE stopped working the issue?

  j1bissig

  I had the same problem on my HP Pavilion dv7 and had the chance of getting a solution.

  I, too, put the finger on biometric authentication as the problem Service.  By disabling the service, Internet Explorer worked well; except, now, I had no finger analysis feature.  I installed the latest version and it worked for a few sessions and then the problem comes back.

  Looking at my updates, I realized that the Flash is set to update at the same time, the problem started.  I tested by activating the biometric authentication Service.  Instead, I disabled the Flash add-on in Internet Explorer and it did not work again; except, now, I had no Flash.

  Searching online, I came across this post from Adobe:

  Post on the Adobe Forum: IE9, Windows 7 64-bit Flash causes "Internet Explorer has stopped working".

  I followed the instructions in this post, including the "clean install" and reverted to version 10.3 of Flash.

  Post on the Adobe Forum: how to return to a previous version of Flash Player?

  Now, all the features work correctly.

  I hope this helps!

• Internet Explorer stops working stops down. There?

  Explorer stops working even with new anti-virus software.

  Hello

  What new anti-virus software? Have you used the old tools its system to the to remove the old antivirus?
  If this is not the case, they leave problem causing remains.

  Check out this list for some of these removal tools.
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  -----------------------------------------------------

  Hello

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------------------

  Internet Explorer not responding, stops working, or restarts
  http://support.Microsoft.com/GP/pc_ie_start

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• get the following error message: gfxui has stopped working

  have a gateway with windos 7 Home program get two error messages. Gfxui and photo frame does not has stopped working. Don't know what they mean for beginners.  Can any body explain to me please?

  Thanls

  gfxui is part of the Intel graphics drivers. So, please update your graphics driver to resolve the message "stopped working".
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Firefox 3.5.1 running Vista has stopped working. No error message. Tried to uninstall and install also the latest version and get a message saying that I must first close Firefox (which of course obviously does not work)

  Firefox 3.5.1 running Vista stopped work, no error message. Tried to uninstall and install the updated version. Download the message that I first need to close Firefox, but it is not obviously executed.

  This has happened

  Don't know how many times

  I restored my system to an earlier date, December 2009

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; Dealio Toolbar 3.1.1; .NET CLR 3.5.30729; .NET CLR 3.0.30618; NET4.0C; AskTbWCL/5.8.0.12304)

  Firefox can not run visibly, but is probably running in the background. It is in the Task Manager. To access the Task Manager go to Start and type in taskmgrsearch field. This will open the process task manager. Then go to the tab processes and end firefox.exe. After the end of this process, close the Task Manager and try to re-run the installation/uninstallation.

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• I can not run dinner dash hometown hero. He will be in charge, but will not play. He said that the program has stopped working. How can I fix?

  I can not run dinner dash hometown hero. He will be in charge, but will not play. He said that the program has stopped working. How can I fix?

  Hello

  Please contact the Microsoft Community and sharing this information with us.

  I'd like you try to perform a system restore to undo changes.

  See the article-

   

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings

  Note:

  Perform a system restore will cancel all changes made on the computer before the show. You may also lose unsaved information as well. Proceed at your own risk.

  If this is not enough, then you must contact game support for assistance.

  Do not hesitate to contact us for any problem related to Windows. We will be happy to help you.

• Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Same fixed.  At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.

• Error - birth of nations has stopped working. Not able to run Rise of Nations in the Windows Vista-based computer.

  Original title: Rise of Nations

  I used to play on my computer but now the game stops after the opening movie is finished, it closes and says "rise of nations has stopped working. a problem caused the program to stop working corectly. Windows will notify you if a solution is available. "He has never found a solution to the problem. This happens every time. reistalling tried diferent even repeatedly in different places without success. My os is vista home top and I have a dell studio xps. the disc is not a top scratch. Please help me! Thank you!

  Hi GavinGraham,

  I recommend you contact the center of Rise of Nations Solution & advance helps support professionals.

  http://support.Microsoft.com/GP/cp_riseofnations_master#TAB4

  Hope the helps of information.

• I had a computer stop working (broke) who was running CS3. Now I have a new computer and downloaded Cs3 from my Adobe account online. After you have downloaded and installed, I entered my serial number and it won't work. I could not turn it off on m

  I had a computer stop working (broke) who was running CS3. Now I have a new computer and downloaded Cs3 from my Adobe account online. After you have downloaded and installed, I entered my serial number and it won't work. I couldn't turn it off on my computer due to the fact that it broke down.

  The serial number you have is a Volume License serial number, which works only with the specific volume license Installer. Please visit the Adobe license | Serial numbers | Orders | Accounts.

  I hope this helps.

• "Configfree has stopped working" error on Satellite L300 Win7_32bit running

  Full text message * task status bar Menu ConfigFree has stopped working *.

  Whenever the modem USB (key Huawei E352 HSPA USB) connects this error. Running Win7 Ultimate 32 bit.

  Google search: some believe it is a virus, others believe that it is a matter of hardware/software.

  How should I do? Any ideas?

  Thank you

  It is not easy to help you because you use external third party material. I put t think ConfigFree is tested as intensely with all sorts of external devices.
  Why this may be just speculation. Still is it that ConfigFree is not necessary to run then I recommend to leave ConfigFree before starting to use your modem. How to fix? Good question. What you can do about it? Not much. Perhaps to find new version ConfigFree and reinstall in the hope, it will be OK. In my view, no more than that.

  I use ConfigFree constantly with LAN and WLAN networks, and there is no problem at all.

• Why has my menu drop-down screen for notifications to stop working? The bottom screen will pull up but pull down is not. IPhone6

  Why don't my notification pulldown screen stopped working on my iphone 6?

  Hi Nomoitunes,

  I understand that you are not able to open the screen of Notifications on your iPhone 6.  This feature has never worked on your iPhone?  What iOS version are you running?

  To get notifications, you must be connected to a Wi - Fi or cellular network. If you do not get notifications for a specific application, try the following steps:

  1. Make sure that the application supports notifications. Go to settings > Notifications, select the application and ensure that Notifications are enabled, and 'Show in Notification Center' and "Show on lock screen" are enabled as well.
  2. Make sure that you are connected to your Apple ID on your iOS device. Go to settings > iTunes & App Stores and enter your Apple ID and password.
  3. Make sure you do not disturb is turned off. Go to settings > do not disturb and tap manual if it is enabled.

  If you are still unable to swipe down on the home screen to access Notifications, try to restart your iPhone.

  If the problem persists, go to settings > general > reset > reset all settings

  Source:

  Use the Notifications on your iPhone, iPad and iPod touch

  Take care

• Satellite L855-188 runs slowly - a few apps stop working for a while

  Hello

  I bought this laptop there is an upgrade to a week of the dell studio 1558 and it is most powerful spec wise, and I will admit windows 8 makes things a little strange, but I have problems with the laptop:

  Sometimes the laptop works slowly and some applications such as chrome and steam and Skype just stop working for a while and sometimes require applications to be reset to zero before they will work again and chrome has developed a bug that doesn't let it open if I click with the button straight on her and say to open a new window

  The without wire will fall randomly and won't open the Connections window, the devices show as being active, but cannot enable or disable it or find or even open wireless connections menu for connections to find this can be solved by a system reboot... I have updated the drivers for the wireless to the most recent for the Atheros card

  He do not restart, shutdown or sleep when asked to do the screen turns off, sound as his preparation to close and say with the darkened screen suspended in the closing state until he either cut his own power or I hold the power button to force it to turn off.
  I have updated drivers available on the Toshiba site like all the AMD drivers say they are incompatible

  Help would be appreciated, I don't want to send it back or to try to get back into windows 7 or something dramatic

  To me that sounds like a large number of programs, applications, and processes are running in the background.

  You can try to restore and repair the system:
  [Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]

  If you want to use PC Restore option, you get the same State as at the first day of the purchase. Worth a try.