Virtual Center and Virtual Machines do feed not on after outage

Similar Questions

• Models of virtual machines that are not visible after reinstalling Virtual Center

  Hello

  I can see patterns in data warehouses, but not covered by the option "display" under models and virtual computers?

  This happens sometimes.  You can browse the data store (s) in question, right click on the file .vmtx and add to the inventory?

• the specified virtual machine is currently not runing ID no: c1034a70 exchange System Manager

  I get this error when I want to mount the store point
  in exchange server 2003

  the specified virtual machine is currently not runing ID no: c1034a70 exchange System Manager

  Labor exchange in cluster

  Hi Mohamed Essa,

  The question you posted would be better suited in the Forums of Exchange Server. I would recommend posting your query in the TechNet Forums.

  TechNet (Exchange Server) Forum

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer/

  I hope this helps.

• One of the virtual machine gets the APIPA address after you have configured with a static IP address, where the other VMS works very well with same vlan with static IP

  We have deployed 3 VMs with the same vlan where one virtual machine gets APIPA address, even after the configuration of the IP address manually.

  We do not have servers DHCP and other VMs 2 find with the same vlan

  No IP address is not used by another system and another IP address works

  Meanwhile, I just googled and got a God save the link that helped me in the question of fixing

  http://lyngtinh.blogspot.in/2011/12/how-to-disable-Autoconfiguration-IPv4.html

• My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• the virtual machine customization: Customize not

  Hi all

  When I create a model for w2k8r2 I follow these steps:

  -create a virtual machine

  -install w2k8r2

  -install the required patches

  -install all the software business for our build

  -stop the machine (no sysprep is run)

  -model of the virtual machine

  Now, when I deploy a vm' in this model and select: Customize will not... machinery recently deployed still would be Sysprep and made unique?

  Thank you

  Dryv

  How can I make sure my get sysprep machines would be?

  very simple.

  Use vCenter customization specification Manager, PR Cutomization Spec File for Windows, specify the Hostname of the virtual machine, the license key, network settings and check generate new largest SID.

  See next post where someone has explained how to do this step by step activity.

  Creation and use of VMware Guest customization Specification"blog of Adrian Costea

  now, when deploying the new VM model of yours, please check customize Guest OS-> select spec file. customization you created. and continue with the deployment.

  Rest will be done for you, as your newly deployed machine will be syspreped,

  This way you won't have to worry about SID, but at the same time many other things will be also supported.

• The features of virtual machine that are not supported or disabled material...

  I get this error when I try to migrate virtual machines from one host to another.

  but some other virtual machines to migrate.

  What's wrong? I have
  

  and if the reason EVC mode I think that I can not migrating other virtual machines, am I right?

  

  Jokerciitaw thanks for the reply, but I can't understand if you're right... How can I migrate some other virtual machines?

• VCenter shows a network for a virtual machine that is not associated with any host

  I have a win2k3 VM who at one point had a network assigned to him called "MONITORING".  This network is configured is no longer in the ESXi (5.5) environment.  The virtual machine is connected to a network called "PRD-SURVEILLANCE" which is correct.  It's not really cause a problem, but I can't find a way to get rid of the object of MONITORING network.

  In VCenter MONITORING networks has a VM of 1 meter, the number of hosts of 0.  I also see it in the VM - dialog box, change the settings, but there is no option to remove it.  Profile Image to the virtual machine is version 10 so I can't use the old Client of VI to try to remove it.  I have checked each host and do not see this listed network object.

  I tried to restart the VM, it migration between hosts, changing its network of SURVEILLANCE of PRD to another network and vice versa and close - remove NIC and add a new card network.  MONITORING legacy network still appears in the config.

  For the virtual machine's .vmx file shows that the correct network: ethernet0.networkName = 'RDP-ANALYSIS '.

  Any suggestions on how I can remove the artifact of MONITORING network?

  The virtual machine has a preview that was created at the time where the MONITORING network was still affected?

  André

• Virtual machine session is not a camera

  I use VMWare Player 5 with an installation of Windows XP to support a camera (Canon Powershot G1) that doesn't have any driver for any version of Windows.

  He worked for a while, but now it does not work.  I don't remember if I had to configure whatever it is some way to make it work at the outset.

  There is no icon for the camera in the toolbar of the player where to appear other configurable devices (optical drive, etc.).  XP does not detect the camera.  The OS (Win Vista) of the host, but as I said there is no (native or Canon) driver for it.  It doesn't seem to matter that I have connect/power on the camera before or after that XP is running in the drive.  Similarly, it does not seem serious if I disable the entry does not work in Vista Device Manager.

  The camera itself looks very good and still work if I plug it into a PC running XP.

  How to solve this?

  It seems that the installation of XP virtual machine was probably corrupted, because when I created a new virtual machine and install XP in it, the camera was detected fine.

• Virtual MACHINE disk, but not in the inventory

  I have a virtual machine that has disappeared from the inventory, but is still in the (non-local) data store. In my view, that it was off. I tried to add to the inventory, but received a message that a virtual machine is already registered with that name. I believe that these are the steps that led to this State:

  I had a consultant in an ESXi host to replace it with a new one and a few weeks ago. All virtual machines have been moved out of the old host. The virtual machine in question was arrested that we did not use it. I just noticed today that it was not in the inventory because now I'm ready to use it.

  Another change that happened a few weeks ago was replacement unit vCenter vCenter. I don't know if who had nothing to do with him or not.

  Any suggestions how I could see the virtual machine in the inventory again?

  Hello

  As you can see this message, "received a message that a virtual machine is already registered with that name", while adding another virtual machine name use inventory. However, be sure that this virtual machine is not already.

  Concerning

  Mohammed

• Try to mount a drive on my virtual machine that is not part of the data of the VM store... Please help!

  Hi all

  I have ESXi 4.0 installed on my server, and one of my four VM is an instance of Debian Lenny. My VM residence on a Raid-1 data store according to the 2x1.5TB. I have an additional SATA drive connected to my server (it is in one of the 8 hotswap bays in the server) I want to get on this VM Debian.

  Where can I do if the virtual machine can detect and eventually to mount this drive? I did research on vSphere manual with no luck yet.

  Thank you in advance for your help!

  ESXi has several limitations (due to the limited service console).

  So you don't have USB support in the hidden console, you cannot read NTFS and Linux file system (no module in the kernel) and so on...

  As ESX and ESXi cannot (yet) to virtualize a USB device, so you cannot mount your drive in a VM.

  I would suggest using another system (Linux or Windows with a browser to ext2/ext3).

  André

• Virtual MACHINE starts in EFI environment after crash

  Hello world

  I'm breaking my head on something that looks like a bug to me.

  A few weeks ago, the ESXi host on that I was running VMs crushed (power fail) and after powering back and from virtual machines on this stand-alone host, one of the virtual machines did not start correctly.

  This machine virtual runs Windows Server 2012 and booted up this time in the EFI environment.

  After some research, the EFI configuration is gone. When opening the Boot Manager Maintenance upward and choose 'Start configuration Options', no options are listed. When you add a new boot option and using the backup function, the settings are lost instantly. When comparing the parameters with any other SMV 2012 I have running, Miss me a lot of configuration such as startup options and some driver options.

  These two options will not save after closing the menu for adding these options. When you choose 'Start from a file' I can start the virtual computer by using the 'VOLUME LABEL\EFI\Boot\bootx64.efi No.' file. After the virtual machine restarts, it will be to the EFI environment.

  It is very difficult to find information about the EFI BIOS so I hope anyone here have experience with it.

  I even tried to restore the VM about 2 weeks before the accident, but even with the files of the virtual machine will start in EFI environment with no settings at all. So maybe the problem caused earlier; very weird! Also not to be able to save the new settings in the environment EFI seems very strange to me.

  Thanks for the replies! =)

  Hi René,.

  Hmmm... There is something of very, very wrong with this file NVRAM.  Looks like that the power failure has corrupted the file NVRAM in a way that confuses the firmware irreparably.  I consider this new next week (next year!) when I'm back in the office and will introduce an internal bug report if I find something that we can make it more robust.

  Although I generally recommend it not for VMS EFI, in your situation, your best course of action is probably the virtual computer power off, remove the file .nvram to the directory of the virtual machine (or rename it to something else, if you want to be extra careful), and power then it powered.  A fresh .nvram file will automatically create the virtual machine starts.  For the most part, reasonably normal Windows installations, the virtual machine must then be started automatically in the operating system installed.

  (For the benefit of other readers of the forum who may come across this thread, I repeat: do not delete a virtual machine EFI NVRAM memory, unless you understand the consequences!)  "It seems that there is rather than remove the NVRAM in this particular situation and very few others.)

  Please let me know if that gets things going again!

  And I'm going to one of our regulars of the forum, WoodyZ, avoid having to make his regular situation comment: If you haven't already done so, you can consider investing in an uninterruptible power supply (UPS) to keep your system running through power cuts or to allow at least a normal instead of a hardware failure stop.

  See you soon,.

  --

  Darius

• Virtual MACHINE running on two hosts after hung vmotion

  Hello

  I started a VMotion of virtual machine by host A to host B. The request got hung at 65% for several hours. I restarted the VCenter service, registered to vsphere. The process was running is longer, but now the virtual machine appears on the Host A and host B.

  The Cluster-'Virtual Machine' tab displays the virtual machine and cycles between two hosts seconds couple?

  Anyone seen this before? How can I fix it? Thanks in advance!

  First of all, it's impossible.  A virtual machine cannot be in 2 places at once.  It's just in the transition.

  Secondly, vCenter manages the process but it doesn't actually do the vMotion, ESX hosts are.

  What is happening is life of the virtual machine on the host only until the end of the evolution towards the other host (somewhere around 97%) when the transfer is confirmed with the new host.

  Best thing to do is to restart the services of management on both hosts and see if that frees the vMotion.

• Printer installation problem. Watch is printers and fax machines, but does not print

  I had to move my printers due to a collapse of the motherboard.   I moved my HP DeskJet 710C from a computer (under XP SP3, through LPT1:, where he was part of a network home and works very well) to another computer, also under XP SP3 on the same network, but who doesn't have a printer port.   I replace the cable with a USB printer and I tried to install if via a port USB001 printer.   The machine seems to install the printer (manually - it is not automatically find) and it shows in the printers and Faxes folder.   However, it does not print.   Any document disappears into the other, is not listed as a document to print, but it does not reach the printer.    I did everything I can find listed on the HP web site and run the FixIt program nothing works.   A search for network printers, are looking for a printer, provides a list, of which some are listed as invalid.   I think that I had uninstalled to printers to my computer until I tried to install this printer.   Now, I wonder if these "invalid" entries are mucking up of my installation.   How can I remove 'Invalid printer' names in my list of installed printers.   It seems in any simple way.

  I have my sure others must have had similar problems, but I can't find it on the net.

  Any help would be welcome.

  Thank you

  writing in the new message: * e-mail address is removed from the privacy... *

  Thank you, Tom,.

  I have found no useful HP support. They seem to only want to buy a new printer, but if I can't install my old I'll be able to install a new one? Or > when you think that you download using them, you actually download scanning for the third-party driver software, which has then finds all kinds of driver problems > and wants you to pay to get them replaced or updated.

  This isn't HP; That's the scammers try to sell you anything for an exorbitant price.

  As the computer receives automatic updates from Microsoft and works well otherwise, I do not trust software that detects problems everywhere in my machine. Or am I > stupid? Or is it driver/driver scanner software update that you can trust?

  Most of the pilot sites is not trustworthy. I used Device Doctor and found useful. There no drivers to download IIRC; It just tells you that drivers must update and where to find them. Here is an article on this subject (and no, that Thomas is not me):
  http://mintywhite.com/software-reviews/maintenance-software/device-doctor-totally-free/

  I'm still a little worried about 'Invalid printer' entries in my system network and feel that if I could get rid of them, I could make progress. When I try > print (via USB connection) my wireless network camera flashes with enthusiasm, typical activity out via the wireless network. The file is certainly went > somewhere, because it is more listed as a document to print.

  What printer you put as a default? This should be where the printed document (Word of the device - expected :-)).

  SC Tom

• Security Center and updates of Windows do not work on Vista laptop

  I have a laptop Dell Inspiron with Vista 1405E.    The Security Center and Windows updates do not work.

  I ran Norton Utilities to clean the registry and I deleted Norton Antivirus (completely, following the instructions from Symantec on the phone), but nothing has changed.  Any suggestions on what could be the problem?

  Thank you

  Should I remove S * PERAantiSpyware from my computer?

  If it is not necessarily - free SAS, but if all were fine with your computer (and it's not!), you should not have installed SAS because MSE includes a component of anti-malware.

  Should I install the [definitions optional updates offered by Windows Update MSE]?

  You pouvez install them but this is not necessary - assuming that MSE is installed & working properly... but I suspect that this is NOT the case!  See this FAQ: http://answers.microsoft.com/thread/74e507b8-f6da-4eca-8ce7-d1aca7d3f1ba

  [Microsoft] Security Essentials is related to the Security Center?

  Yes. Security Center monitors the status of the firewall, automatic updates and Protection against malware (anti-virus & anti-malware; applications i.e. Microsoft Security Essentials).

  Translation: Since the Security Center still cannot be permanently turned on, there is a very good chance that MSE and Windows Firewall will not work correctly - despite the fact that we have now managed to get the computer fully patched to Windows Update and despite the multi-step fix, I had to make.

  In your case, there are several possible causes for this behavior:

  1. your McAfee subscription and/or your previous subscription of Norton AntiVirus may have expired before that you did something;

  2. do not run the remove McAfee & Norton tools at the right time; or...

  3. misguided use of registry cleaners.

  So, what can you do about it?...

  OPTION A: MSE support could be able to help you. Residents of the United States (only!) should be able to open a support incident free of charge by e-mail via this page-online https://support.microsoftsecurityessentials.com/default.aspx?productkey=morrolaunch&mkt=en-us&st=1&wfxredirect=1

  Note: After selecting your option, language (e.g., English-US) and clicking the button CONTINUE, click on the EMAIL button, not the FORUM button!

  OPTION B (recommended): See the poster in this thread and follow the instructions of (my) WHOLE (to the letter and in order! ) to restore your computer to a State safe & functional: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb

  If these procedures are outside your technique "comfort zone" - and there is no shame in admitting this isn't your cup of tea - take the local computer, reputable and independent (i.e., not a 'BigBoxStore' or Geek Squad!) computer repair shop & let them do the work.

  IMHO your computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you. Good luck!