Visio 2013

Similar Questions

• 2013 Visio

  I installed Outlook 2010 in the base. Visio 2013 has been deployed in an AppStack. Each time a user starts Visio, it passes through the initial installation of Visio. How to avoid this initial configuration, that happens every time?

  Please make sure that the machine commissioning also has Outlook 2010 (or other office applications that are on the base image) preinstalled.

• 2013 Visio themes

  Hello world

  I virtualized Visio 2013 and everything works but one thing. When I go to the tab design, themes are loading just forever. I can click on them and use them. Looks like the Thinapp can access the theme but not the icon that shows.

  

  Even if I add to the main menu, it always does the same thing.

  

  Did someone you have the same problem?

  Thank you

  Francis

  After some troubleshooting, I noticed that the problem was present when I run it on 64 bit computers. I did other tests and the problem was that he's trying to focus on the Program Files folder, rather than the program (x 86) files to get the files. I copied the contents of the visio folder in % ProgramFileDir(x64) %\Microsoft Office\Office15\ and the problem was solved.

• Print driver for HP 5000 problems in Windows 7.

  When trying to print polyester plates to use on my press, the paper size must be rough 11 x 17. I've put this in the paper/quality tab, and then check in the effects tab, and set to the letter (size adapted to 64%). If I change this to actual size and return to the paper/quality tab, that it has changed back to the letter. The document itself is 11 x 17. Why the printer driver has a size of 11 x 17 in the effects tab? OS - Windows 7, Visio 2013.

  Hello

  I suggest you contact HP support for help on this issue.

  http://WWW8.HP.com/us/en/support.html

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• ISO image installation problems under Windows 8 Pro

  Whenever I try to mount the ISO with the integrated installation of Windows 8 Pro it returns "could not mount file" 'Sorry there was a problem, the cut file' or 'the disk image file is corrupted.

  In some cases, the file gets however mounted, but to find out, I have to watch computer containing all the readers.

  In each case, whenever I drop an ISO that contains audio from SACD or other media, danslechamp of J River Media Center 'Play now', it shows every single track file picture disc and plays well. So he does, even when burned on a DVD + R, then, obviously, the ISOs are healthy and should the problem with Windows...

  I'd be happy to hear from you on this subject.

  The file must be renamed to .exe on the Microsoft site.  This is an executable, not an ISO standard

  (Visio 2013 64 bit in English)

  OK guys, I FOUND THE SOLUTION by chance.

  Here's how to solve the problem (at least it worked immediately when I did it, then try it!)

  Right click on the image in question file (.) IMG. ISO, etc...) and choose a default program to open with. WIndows MUST ABSOLUTELY BE the DEFAULT program to open the image files. There is a bug not declared on the Explorer of Windows 8 is not not the default value, which is not to open an image file valid, not corrupted.  YOU MUST set the default Windows Explorer to mount as a virtual DVD drive image files in WIndows 8.

  That's all and I hope it works for you. Thank you! and if it works, please mark this as useful to show your appreciation, because there is no button of congratulations or thanks. : D

  Here what I was doing, eject the SD card (you don't have to get out of the computer).  Try to mount again.  I did it and it worked perfectly.

• How to manage MS Office applications?

  I am trying to get some applications of MS Office to work with Volumes of App.

  I got:

  • View of the horizon 6.0.1
  • App volume 2.9

  (Ideal) my goal is to have a few AppStacks:

  • MS Office 2010 Standard
  • MS Visio 2010
  • MS Project 2010
  • MS Office Standard of 2013
  • MS Visio 2013
  • MS Project 2013

  All are 32-bit versions.

  I've tested, and everything works fine as long as you have an AppStack. All applications can be opened and used no activation is necessary.

  If I want to combine MS office 2013 and 2013 project to a single user, only one of the 2 books. The others, let's start with an activation screen that doesn't work very well. After the next logon the activation again.

  So I tried to create a new AppStack with MS Office 2013 and 2013 draft in an AppStack.

  I created an AppStack that with Office Update and installed the project there as well.

  If the user has an AppStack with all applications, but the problem remains the same. Even when I run cscript ospp.vbs/Act of command (successfully) (documentation App Volume 2.9 does not say it is necessary, as it did in older versions).

  I just always get the activation number when I try to have 2 Office applications for a single user.

  Suggestions how to deal with this problem?

  I installed the Multi MS Office Proofing Tools version. That did not work.

  Now, I downloaded the package with only one language, it seems to work.

• Microsoft Visio 2016 - PDFMaker support

  I've recently updated my laptop to work with the following operating system and the applications

  • 10 of Microsoft Windows (64-bit)
    • Microsoft Office 2016
      • Outlook (2016-32 bit). validated PDFMaker the module works correctly
      • Excel (2016-32 bit). validated PDFMaker the module works correctly
      • Word (2016-32 bit). validated PDFMaker the module works correctly
      • Adobe Acrobat DC (AKA: Acrobat XII)
    • 32-bit Microsoft Visio 2016
      • Does not work; I seek support for hours, and the difficulty of recording offered for 2013 office no longer works.

  What I'm trying to understand, is that it resembles the list of compatibility provided by Adobe (see link below) shows that Adobe Acrobat DC supports Visio 2016? But since then I saw Adobe application of feedback from people about whether if they want 2016 Office supported for PDFMaker so I'm really confused, as if the PDFMaker add-in works on applications listed above, but simply not on Visio 2016 32-bit all or is there some other password question.

  Questions

  1. Is Adobe Acrobat DC, taken in charge the of PDFMaker Microsoft Visio 2016 32-bit module?
     1. If it supports Visio 2016 64 bit and not 32-that would be the right information?
     2. If it's NOT; is there a roadmap when it will be supported?

  Link

  https://helpx.Adobe.com/Acrobat/KB/compatible-Web-browsers-PDFMaker-applications.html

  Hi Nathan

  Visio-2016-32-bit is now supported with the latest version of Acrobat DC.

  Please update your Acrobat and let us know if you face any issues.

  Thank you

  Tanvi

• Visio 2010 32-bit on Windows 7 64 bit

  We run ThinApp 4.7.3 worm - 891762 on a clean 64-bit Windows 7 Enterprise VM.

  We are running Windows 7 64 - bit on VMWare View 5.2, and these virtual computers have Microsoft Office 2010 32 bit installed in native mode. I can't change that, as some of our applications require Word and Excel in their correct position.

  I was instructed to get Visio on our environment from view, so I decided to try ThinApping, rather than a native installation. I followed this guide:

  https://blogs.VMware.com/ThinApp/2013/02/ThinApp-Microsoft-Visio-and-Project-2010-while-locally-installed-Microsoft-Office-2010.html

  But it seems to use Windows XP as the machine clean. After her, anyway, the build is finished, but when I run the application, I get an error "the operating system is not currently configured to run this application". It seems that I have broken something, but I have no idea what.

  If anyone finds it, I was able to fix the problem. The article linked above is FAKE if you capture program on Windows 7. Essentially, you just follow the guide on VMWare support site:

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalID=1022287

  Use the section on 'With Native Office 2010 already installed'. Also, I've found that you use 4.7.x, you must capture on Windows 7 32-bit.

  Hope this helps someone.

• 2013: MacBook Pro replacement motherboard or not

  Brain Trust,

  I need some advice here.

  I have a 2013 fully bridged on (500 GB SSD, 16 GB of RAM) MacBook Pro and the sound from the speakers awefully distorted.

  I did all the regular troubleshooting inclusing a clean installation of the operating system, applications 3rd party and the problem persists.

  The distortion is NOT dependent on volume, it is still there, as if the sound is cut at all levels.

  Now, the headset on the port is perfectly clean, so I think I have it narrowed down to the (material) built-in drivers for speakers. I went to the Genius bar and they agreed and recommend a motherboard replacement. Since I have a month left my Applecare, I could do it, but I hesitate. Professionally, I rely heavily on my machine on a daily basis, and I fear that a machine otherwise perfect with zero problems (other than the problem of speaker) will be messed up.

  What is your experience with a motherboard swap and what do you recommend I do? Live with the distortion and contemplate a great Macbook, or opt for repair until the warranty runs out. NB, I have a very old Macbook that I can use for the week or I'll have to miss my machine.

  I'll answer my own question:

  Do it! I had a fantastic experience! Not only was my main problem, distortion in speakers, correctly diagnosed and resolved, since engineering also saw a small white spot on my screen (who had been there forever), I also had a nine screen. Not only that, I got a new valve and bottom plate, so after 3 years of intensive use, my Macbook Pro looks like new again. Total costs under Apple care program: $0.

  It's really the only problem with Aplle MacBooks: my excuse to buy a new went through the window, this machine will last me a few years ago!

• IPod 1A generazione outdo a MacBook Pro 2013 retina

  Sono a felice di possessore di iPod prima generazione e I like sapere come possibile collegare questo con iPod 5GO he mio Mac book pro retina is a November 2013 is che vorranno help tutti grazie ciao

  Ciao, se si desidera collegare un iPod 1 ° gen per un 2013 Macbook Pro, allora si potrebbe sarà necessario utilizzare una Firewire 400 a USB per collegare. Tuttavia, potrebbe non funzionare come personalmente ho avuto problemi di connessione di 1 ° generazione iPhone 4 GB a iTunes. Potrebbe essere necessario un vecchio Mac con una versione precedente se non funziona nella versione più recente. (Ci scusiamo per la traduzione, sto usando Tradurre per rispondere alla domanda)

• MacBook Pro (15 inch, end 2013) with MacOS Sierra 10.12: kernel_task maxing out CPU with external display

  I have a maxed out end 2013 the MacBook Pro Core i7 to 2.6 GHz, 16 GB of DDR3 RAM, 1 TB SSD, NVIDIA GeForce GT 750 M 2048 MB, Intel Iris Pro 1536 MB.

  Also, I have a DELL P2415Q Display 24 inches (3840 x 2160) using Thunderbolt, are involved through the headphone jack and use a USB for lightning to recharge my iPhone.

  I upgraded to macOS Sierra the day he is released and had no problems until this morning. I unplugged my external screen and speakers and used my laptop for about 15 minutes, the battery, and then returned to my office and plugged my Thunderbolt, rear speakers display in and my CPU shot at 100% and never came back down. My Mac is essentially useless because kernel_task is eating all my CPU and to prevent another asks to enter the CPU.

  I have since audited equipment - everything was fine, reset the NVRAM and I tried to erase IOPlatformPluginFamily.kext .plist files but I couldn't on my Mac (trying to follow this guide, started in Safe Mode and everything then went to try and find the file and my Mac just does not have it). When my external screen is plugged if I'm doing anything CPU intensive (videophone, opening of Chrome, etc.) then my kernel_task gets mad again, and the only way to move is to unplug my screen. Connect my iPhone to charge the tips also my kernel_task as well. I followed my internal temperatures, and nothing was out of the ordinary, to cold currently at about 140 °.

  At this point, it seems that any time that puts something on the charging system and increase the temperature internal internal components of my Mac kernel_task maxes my CPU, which brings my Mac to its knees.

  Any ideas how to fix? Is this just a major bug in 10.12?

  Hi, Trent L.

  Try this - problems with macOS Sierra? This fix can help you.

  He got rid of all my macOS strangeness of the Sierra.

  Hope this helps,

  -BrainSel

• Picture-in-picture (pip) works on macbook air 2013

  Can't seem to locate in the specifications or support if my 2013 macbook air supports picture-in-picture function.  I can't seem to make it work, but I don't know if it's the videos that I'm looking at the software, o

  PIP is Mac OS Sierra.

  All of the Web sites or applications are supporting this feature again as it is new.

  You can use the feature with iTunes if you want to check.

  Is attached an image from iTunes, look at the icon that has two boxes and click on it to activate.

  You'll notice that the box shrinks and you have PIP to watch album art or even play a movie while using other applications.

  

• IPad Pro 1st gen is no longer charging via rMBP end 2013.

  IPad Pro 1st gen is no longer the load via rMBP end of 2013 after the Ipad pro iOS 10.0.1 update

  can someone enlighten me on this issue? Apart from the iPad pro requires a larger draw of power than an iPhone.

  Thank you.

  I ask as its just designed by using redundant DuetDisplay and I need a complete battery to use the ipad as a second display now...

  Try alternative ways to charge your iPad here > If your iPhone, iPad or iPod touch won't charge - Apple Support

• I want to use Siri on my Mac Pro 2013, but there is no built-in microphone.

  Great so Siri is now activated on your desktop with Sierra. How can I add an Apple flagship computer microphone, the 2013 Pro Mac in a cost-effective manner? It's not even a microphone jack! Help, please!

  Is your Mac has a headphone jack? Then try an Apple headset with a built-in microphone.

  I'm seeing this in the specification tecniques for Mac Pro: http://www.apple.com/mac-pro/specs/

  Audio combined optical digital output/analog line in mini-jack

  headphone 3.5 mm with headset stand

  The Headphone Jack would connect Apple headphones.

  Or use any bargain price USB microphone for speech input.

• I am (early 2013) iMac 21.5 inch 8 GB which is sutting down then restart unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions?

  I have an iMac (early 2013 21.5 inch 8 GB) which stops and then restarts unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions? I bought this machine this June last at B & H in New York.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.