Vista compatibility with epson stylus cx4600

Similar Questions

• get the error with epson Stylus 845 printer after replacing ink

  replacement of original ink title: workforce 845

  Epson Stylus 845

  Single cartridge need replace however, after replacing the cartridge, it displays an error saying to turn the printer off and then back on.  When the printer returns to the top it either comes up with the same error or you request to replace a different cartridge and then ends with the original error start the cycle again.

  All four cartridges have been replaced and all are 127 cartridges.

  Help!

  Thank you

  Randy

  Hi Randall,.

  Thanks for posting of queries on Microsoft Community Forums.

  According to the description you provided, I understand that you have a hard time with the printer.

  I would like you to follow the links provided to solve the problem with the printer:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If the problem persists, please contact Epson support:

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=184583&infoType=contact

  If you need help with windows, just tell me and we will be happy to help you

• Difficulty finding documents after scanning with Epson STYLUS CX3810

  During my first attempt at a document scanning, it appears to succeed, but I can't find the doc in my computer.  I'm scanning rom an Epson STYLUS CX3810 to an Inspiron.

  Hi HoppeShark,

  You should be able to find everything you need on the site Web of Epson:

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=60421

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Vista compatibility with xp burned discs

  Cannot open programs with vista that were burned with windows xp

  It of nothing to do with it, depends on exactly what you burned and how. A cd contains usually only read files that must be copied to the HD and read only attribute off, until you can do something with them.

• Epson Stylus Photo RX420 with Vista printer driver problem

  I have an Epson Stylus Photo RX420 Series all in one printer, copier and fax machine which worked perfectly on my old Windows XP computer.

  Unfortunately this XP computer has failed recently so I've upgraded to a new PC running Vista.

  When I try to install the Vista printer recognizes the device and research initially drivers preloaded to find the printer driver.

  He says so I need to use Windows update to download the right driver which I allow then (which is consistent with the information available on the Epson site that says I need to use Windows Update to get the correct driver).

  Windows Update, then go online and find the pilot, but finally errors saying installation fail due to a timeout problem.

  I have no other problems with Windows Update install the patches, fixes, etc. They all have download and install correctly and they should be larger in size than the printer driver.

  Any thoughts on how I can get the correct driver for this printer, download and install?

  Hi IanRP,

  I suggest to download the compatible driver for your printer from the link below and check if the problem is resolved.

  http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-GB&data=nKGrQtfEm6nklAFAU002FI5XulUnXahGGzFymQyp3UZx8RYU003D&TC=6

  If this does not work, try to connect to the Windows Update site. To do this, visit the following Microsoft Web site and install all updates.
  http://windowsupdate.Microsoft.com/default.htm

  You can check the link below:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Corrupted file... Trying to install my epson Stylus printer 610. Have a LENOVO XP (with currently installed sp3) 32.

  I just sent you a 'response' to my answers... but it came back as undeliverable.  When I accessed the site... I don't see my display problem.  I tried EVERYTHING to get this printer (or any printer to work.  I tried all the basic elements.  Uninstall, reinstall, remove all printers, install updated windows xp3, received all the drivers updated to EPSON.  And now I tried to do what was suggested.

  The USB drives were works very well with my Microsoft Mouse, etc... until I uninstalled all 7 of my USB HOST controller drivers.  See the previous information in my other post.  (I apologize... I've never used this show.

  I worked on this problem REALLY for the more than 40 home... several times.  I even bought a new printer, thinking that there was a problem with the replacement printer.  The printer works fine.  There is a WIN XP driver or another system file that is corrupted.  I walked into the registry in the past... but can't do it without a detailed help, I know what happens if you screw this place.  I can't afford the $150 to take this in to someone I do not trust to fix.

  I know that there is someone out there who can help!  I am familiar with troubleshooting and computers... but I am an old Gal BACK base...

  I appreciate anything anyone can do to help.  Here is my answer to that I tried some tips based on this card.

  Kind regards

  c

  Re: I can't get my epson Stylus 610 printer to print with my computer laptop lenovo, win xp 32. The printer was working fine... had a replacement and will not be printed by the USB port.

  TO: 1 recipient 1

  CC: 1 recipientYou 1 more

  CCI: recipientYou

  Show invisible characters

  Message reported

  Monday 6 February 2012 13:33

  I uninstalled all the controllers host USB 7 I had in Device Manager.

   

  After the system restarts, I got the following errors... that I get whenever I try to install my printer:

   

  1. "the software you are installing for this hardware INTEL ICH8 family USB host controller-2830 has NOT passed windows logo testing to verify its compatibility with windows XP.

   

  second message:

  There is a problem installing the USB controller.  An error occurred during the installation of this device.  Cannot install the drivcer because it is not digitally signed or not signed in the appropriate manner.

   

  To remind you.  This printer was working properly on this computer for several years.  I have a LENOVO T61 running on Windows XP
  32-bit system.  I don't know that somewhere there is a corrupted file...

   

  I'm pretty good at technical things... but there is here a file that is beyond my ability to get to and change on mine.

  Any other suggestions?

  Respectfully,.

  Cheryl

   

  The simple things in life are the most important live - laugh - Love Cheryl

  De : Microsoft Answers * address email is removed from the privacy *>
  To: * E-mail address is removed from the privacy *
  Envoy: Monday, February 6, 2012 07:06

  
  Topic: I can't get my epson Stylus 610 printer to print with my computer laptop lenovo, win xp 32. The printer was working fine... had a replacement and will not be printed by the USB port.

  	YOUR PROFILE | Frequently asked questions
  Hello petersonc2c: Your question on the Microsoft Answers Site received a response: Question I can't get my epson Stylus 610 printer to print with my computer laptop lenovo, win xp 32. The printer was working fine... had a replacement and will not be printed by the USB port. Response Hello 1. do you have similar problems when connecting other USB (Universal Serial Bus) devices to the computer? 2. What is the exact error that you receive when you connect the printer to the computer? Method 1: Try the troubleshooting provided in the link below steps to solve common problems with the printer in Windows Printer in Windows problems http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows Method 2: If the step above does not help us to diagnose the problem, uninstall the [Universal Serial bus] USB host controller drivers and restart the computer. Let Windows install the generic drivers and then see if it helps you to solve the problem. (a) Open Device Manager by clicking the Start button (b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. (c) search the [Universal Serial bus] USB host controller device, right-click on it and select uninstall. (d) restart the computer. (e) to restart, Windows XP must re - install the drivers automatically.   Your next steps *. This response answered your question? So let the community know! [Mark this answer as your answer]

  This answer was helpful? Give the author a few congratulations!
  [Vote as helpful]

  You want to unsubscribe from this thread?
  . Click here to go to the thread
  . In your original question, click 'change '.
  . In the editing window, uncheck the "notify me when someone replies to this question.

  * You will need to enter your password first, but when you get to the thread, you will see that your action has been automatically saved.
  Please do not directly respond to this message. If you do not sign upward or feel that you have received this email in error, click here to remove your email from Microsoft Answers.
  Update e-mail settings .   Privacy policy |   Code of conduct
   
   

  a message about this yesterday.  I got response, but could not answer.

  Here are things I tried.  I've tried everything else.  I am convinced there is a corrupted file, but it's beyond my ability to find and replace.  I could really use help... This printer has worked for more than three years.  The ports worked with other devices until I uninstalled all 7 of my USB HOST controller drivers.  Now my logitec mouse (wireless) no longer works.

  Hello petersonc2c,

  Connect the printer to another computer to check the issue.

  Best to contact the ESPON support the likely problem with hardware that can be set on this forum.

• The printer Epson Stylus 630 and Vista error

  Just purchashed Epson Stylus 630 wireless all in one printer, added to the WiFi network successfully and can print from all accesoriess except the laptop computer with Vista 64-bit. Drivers are correct, I can scan using this computer, but when the print queue shows "error printing" no additional error information. Everything seems correct still cannot print.  Help!

  Hello

  Download and run the tool of diagnosis from the link below and check if this solves the problem.

  Problems printing and printing errors:
  http://support.Microsoft.com/mats/printing_problems

  Also check out this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• Epson Stylus Photo RX620 does not work with win 7

  Epson Stylus Photo RX620 will not print driver installed after the upgrade to Vista.  / Scanner works fine.

  Epson Stylus Photo RX620 will not print driver installed after the upgrade to Vista.  / Scanner works fine.

  Hello

  This printer is on the compatibility list Windows 7 here:

  Compatibility Windows 7 for Epson Stylus Photo RX620 all-in-One Printer

  Please click on the following link and download the latest drivers for this printer.

  Epson Stylus Photo RX620, drivers & downloads - Technical Support - Epson America, Inc..

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Epson Stylus Pro 7000 windows 7 64 bit compatibility

  I have an epson stylus pro 7000 and have just updated to windows 7 64 bit - there are Vista or windows 7 driver available - is it possible to use the driver in compatibility mode xp? or is there a generic driver that will work?

  You must get the 64-bit for this device driver.  Ask Epson if a Vista or Windows 7 Inbox driver is compatible.    If it is a machine large format you will need to get the Epson driver form. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Windows 7 not compatible with the Epson Stylus Photo R380

  I have an Epson Stylus Photo R380 printer connected via USB to my Windows XP desk top.  I also have a laptop Windows 7, I want to share the printer.  I find that the drivers are not compatible.  Are there workarounds?   Thank you

  Windows 7 is not inconsistent with the Epson Stylus Photo R380 (if anything, it would be the other way around).  The link shows that it should 'work' with Windows 7.

  You may indeed need to connect the printer (directly) to the Windows 7 system once to get the appropriate drivers installed before trying to share your desktop Windows XP out to the other system on the network.  No guarantee it will work on the network like that - but I don't see why he wouldn't.

  Hardware support always comes from the manufacturer of the equipment, regardless of the operating system that you choose to run.  If a hardware manufacturer decides that they will not put the drivers for a device after a given operating system or even a service pack on an operating system - it is their prerogative.  It has nothing to do with the operating system, or those who made the operating system.

  You have 32-bit or 64-bit Windows 7?

  • drivers Windows 7 32-bit and Epson for your printer information.

    Printer driver v6.1aA
    Compatible Windows 7 32-bit, Windows Vista 32-bit
    Posted on 12/12/06 - 6.5 MB - epson12034.exe

  • drivers for Windows 7 64 bit and Epson for your printer information.

    Printer driver v6.1aA
    Compatible Windows 7 64-bit, Windows Vista 64-bit
    published 12/12/06 - 7.5 MB - epson12053.exe

  If all goes well a part of which will take you to where you need to be.  In the end, however, do not forget it is the hardware manufacturer who takes in charge (or not) your hardware (for all other devices that comes up for.)

• How can I get a driver for an Epson Stylus Photo 950 printer that works with Windows 7?

  Original title: How can I get a driver for an Epson Stylus Photo 950 printer that works with Windows 7?

  It is not listed in the list of printer drivers and I can't find anywhere on the web.

  Hello

  http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-Photo-950/drivers-support?target=article&Extn=.html&articleid=3394

  This article from Epson says that the driver is included in Windows 7.

  I don't see any info out there that clearly explains how to add it.  It simply States that you must go to "add a printer".  Looks like you already did this well.

  I would say following upward with support from Epson to see if they can offer some better instructions. Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• Printing problems with my printer Epson Stylus NX510 wireless.

  original title: Wireless printer issues...

  Help!  My router died and I work from a Home Office, so I use a wireless on loan from my ISP... it is a temporary solution until they can get out of my house and install a new router. My internet is fine, however, my printer/scanner/copier wireless wouldn't work. So........ I uninstalled and installed using the new wireless 'name' to save it. It allows to copy, but not print from my computer. The computer recognizes it but it says it is offline connection and guard my documents in what. In addition, my Epson Stylus NX510 printer still displays a page with my ink level and tells me that it is printing this page appears but does not read my ink level and it says that my printer is ready to print. My wifi lite is on the printer...

  any suggestions?

  Thank you!

  Jodi

  Hello

  1. What is the operating system installed on your computer?

  2. What is the exact error message you are getting?

  Please follow the steps mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Need computer help for problems of compatibility with Sony Clie PEG-NX73V 16 MB of handheld PDA Vista 32 bit

  Have used the customer for some time, but after a recent update from windows July 14, Windows decided my camera was more consistent. When I try to Hot Synch, an error message appears telling me that my USB deivce is not recognized. Device shows that the Device Manager is hanging with the USB port, but only as an unknown device. My HotSync Manager has been reinstalled and I made it is compatible with XP, which usually healed a similar problem when I started using Vista.

  All ideas

  Hello

  It seems that Sony Clie PEG-NX73V is not fully compatible with Windows Vista. For more information, please see the following link:

  Sony Clie PEG - NX73V Vista compatibility

  You can completely uninstall and reinstall the Sony Clie PEG-NX73V and USB controllers.

  Method 1:

  Step 1:

  Uninstall the Sony Clie PEG-NX73V from the Device Manager and from programs and features.

  Uninstall a program

  Step 2: Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  Method 2:

  Try to reinstall by following the steps:

  a. installation of software on the cd, open the cd and right-click on setup.exe and compatibility of windows xp and the installation if a window appears for the drivers, click use old drivers anyway.

  (b) in 'Start' > all programs > Sony laptop you can right click all the shortcuts like 'Palm desktop for CLIÉ', 'install tool', 'Hot sync manager' and set to run in xp compatibility mode.

  Hope this information is useful.

• iMic compatibility with Vista?

  IMic compatibility with Vista is?

  If this isn't it:

  http://www.griffintechnology.com/products/iMic/

  to learn more.  If it is, the site says no.

  "kittylizmom" wrote in the new message: * e-mail address is removed from the privacy... *

  IMic compatibility with Vista is?

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category