Vista freezes and boots when he feels like it!

Similar Questions

• I have upgraded to windows xp pro and when I downloaded the sp2 computer freezes and restarts when I connect to internet

  I have upgraded to windows xp pro did all updates, and when he places classified sp2 it restarts fine then when I loged on more updates to update it freezes and reboots, when she will recover no codes or anything be it what could be the problem...

  Hello

  1 is it only during the use of the internet?

  Method 1.
  a. click on start and then right-click my computer.
  b. click Properties.
  c. click on the Advanced tab and then click settings under Startup and recovery.
  d. under system failure, click to clear automatically restart it the box.
  e. click OK, and then click OK.
  f. try to reproduce the error message.

  
  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Also I would ask you to update all the drivers of material from the manufacturer's Web site.

  I hope this helps.

• MacBook Pro freezes and restarts when holding

  My Macbook Pro (MacBookPro9, 1 or MD103LL/A 2.3 GHz, OSX 10.11.4 i7) Decides to freeze and restart when lifted with the metal part under the trackpad and around it. It also does the same thing if I let my elbows on the same premises. What may be problem causing it? The machine already fell from anywhere and so, but suddenly decided to act strange. I opened the cover back after this problem and cleaned of dust or debris but did not find a noticeable amount either. The HARD drive has been replaced by an SSD at the Apple Store Amsterdam (Leidseplein) about 3 years ago and the problem has occurred for about a year.

  I would speculate that there is a bad internal connection.  Can you reproduce this every time?  If so, you may be able to locate it.

  Try an Apple Hardware Test.  It could offer a clue:

  https://support.Apple.com/en-us/HT201257

  Note that an error free AHT is inconclusive.

  Ciao.

• Photoshop Elements 5 freezes and restarts when you use Vista

  I have a little problem with Photoshop Elements 5. When I first start the program and click on 'File' system crashes. If I wait about 30 or 40 seconds, it retrieves all and then when to work them again together is very good. It's really very annoying when you start the program, and if someone else has had this problem and knows a difficulty, I would be very grateful.

  Already tried: -.

  Uninstalling and reinstalling

  Repair installation

  Unchecking Adobe Active File Monitor V5

  None of them worked. The problem seems to be related to the performance of Vista, everything worked fine on my old XP machine.

  Now, I use an Acer Aspire 5536 with Windows Vista installed as the operating system.

  Please make sure that you have installed the PES 5.0.2 patch

• Move Xp C drive to the D Vista drive and boot from

  Hello
  I'm done with my son running on Vista computer, I want to add Xp. is it possible to copy the whole disc C to my Xp computer everywhere in the D drive on the Vista computer and startup, IE XP on Vista computer with all my settings, files, etc.

  If XP is preinstalled, it is an OEM license and cannot be moved, as I already explained to you.

  The discs are only recovery disk to reinstall it on the original computer, if it is preinstalled.

  It is OEM if YOU do not go out and buy a version of XP retail and install it yourself.
  
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Microsoft sells more than XP.

  Try online: newegg, Amazon, etc.

  http://apcmag.com/how_to_dualboot_vista_with_xp__stepbystep_guide_with_screenshots.htm

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For any question on XP:

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Windows vista, freezes and then crashes.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: all or any program, internet, photoshop, illustrator, facebook, gmail, live.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Check to see if there are any BlueScreens or more are available with BlueScreenView and MyEventViewer
  information to help. If no BlueScreens post anything relevant you see in MyEventViewer in a message
  in this thread and proceed b. below. If there is BlueScreens post any information that learn you
  them with BlueScreenView (as well as MyEventviewer) and check this thread for more information on
  Troubleshooting the BlueScreens - has. (my two answers albums).

  A. http://social.answers.microsoft.com/Forums/en-US/vistarepair/thread/842fa8cf-535e-4b5d-9416-85eb31edbe6f

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
  Displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  =================================

  B. after having only checked with her above, if no blue screen.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to for many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error codes Vista 65535 and 0x8000fff when you try to load all the files, folders or applications

  I get these two error codes 65535 and 0x8000ff, I'm running Vista 32 bit, with only 1 GB of Ram and use a memory stick as a RAM boost option. System starts as usual, I can connect to the Web, but don't load all files, folders and applications. I have icons on the desktop, but like I said nothing loads. have you tried Live One Care safety scanner, downloads, but used to run, just get the codes above, no matter what I try. In desperation I tried a complete reinstall, still did not work and can not find the productkey.

  Thanks for the reply, we, ve decided that the hard drive is shot to pieces, and will install and old windows xp disc i've got. to solve the problem.

• Firefox will freeze and crash when you use google from the google Web site search

  Every time I use google, which is often because it is my home page, unless the thing I want to look for is the first couple of auto-recherches that appear when I type, automatic search stops and if I press enter or click the search icon that Firefox crashes and I have to stop it, and then try again. However, I have no problem when I try with Firefox in private browsing.

  -> Cache and delete Cookies

  • https://support.Mozilla.com/en-us/KB/template:clearCookiesCache

  -> Clear Cache network

  -> Reload webpages and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Check and tell if its working.

• Why my EOS 60 1080 30 fps video freeze and stall when changed in Final Cut Po?

  When editing from my EOS 60 1080 30 fps video on Final heart Pro 7.3 a stop on unwanted image appears at the end of each clip. The video is also difficult to play, often stalling after each change. Generally video is really the struggle against the program, even cleaning. I tried different Final Cut of the Codex and retired the Elgato Turbo video but the problem remains. Of course, there is some sort of sync problem, but I can't find or understand why it is there.

  Thank you

  Clark

  Here: http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_60d#DriversAndSoftware

  Go to the driver & software, choose your version of MAC OS, choose software, download: EOS MOVIE Plugin-E1 for Final Cut Pro 1.4

  It has the manual inside I think. But you can install it, restart your final cut pro and edit your movie. See if it solves your problem. Let us know.

  PS: Here is the Asia of Canon's Quick Start Guide: http://gdlp01.c-wss.com/gds/7/0300004927/03/finalcutpro-plugin-e1-14-e-en.pdf

  Good luck.

• Trackball blackBerry Smartphones has decide to stop working or only when he feels like it

  Hi Please help

  the trackball on my 9300 stopped working, I have taken battery out and rebooted but still not good ideas please x

  Hello!

  Your problem seems to be more a problem of material rather than a software problem.

  So would ask to visit your neares, Center of BlackBerry services licensed for the treatment of the issue.

  I hope that solves your problem!

  If your problem has been resolved then would you be asked to click 'Like' and accept as a solution so that other advisors invest it times on this Message more.

  Thank you.

• Windows 7, CS4 Media Encoder of freezing and crashing when you click "Start Queue" - each sequence!

  Windows 7, Media Encoder CS4 crashes when the queue starts with firstsequences. However, open export sequences 'Add sequences' of Media Encoder very well. Have re-installed (without first uninstalling), question is underway. I have several important deadlines approaching soon, please help! Media cache has been cleared (automatically or in the past), computer has been defragmented and scanned for disk errors... I'm absolutely stumped!

  Create a new user account on your computer.  Give administrator privileges.  Launch RP and trying to send a sequence to the SOUL.  It work?  If so, the trash your preferences of Pr in your user account.

  In addition, if you do not use your account as an administrator, you should.  At the very least, set the Premiere Pro executable file to run as administrator.

  Jeff

• Satellite Pro M10 freeze and crash with some programs

  Hello

  I have a M10 Pro Satellite...
  A few weeks ago it's freeze and crash with some programs like wmpayer, messenger... I delivered to the authorized agent and they had not detected any problems.
  Already I have formatted several times, but the problem persists.

  Any idea what this may be?

  Thank you

  Hello

  For me it looks like you might have a motherboard problem. Formatting removes the chance that it is a software problem. Try taking 1 stick of RAM and test with it. If she continues to crash, remove that stick and try it. If she does it with the two RAM then those who are ok. HARD drive is not the culprit, so now he could either be processor or MB. Find a program to measure the heat from the laptop and run some heavy programs do overheat. If the temperature goes up and then it crashes, it could just be overheating. If it continues without overheating you either have a CPU or MB problem. I hope this helps.

• When considering a project containing audio and video files in movie maker vista project freezes and thaws randomly

  When considering a project containing audio and digital photos in movie maker in vista, the project freezes and thaws at random. How to ensure that there is a smooth and uninterrupted presentation.  The presentation will last 30 minutes.  I don't have this problem when creating the project

  Try Publishing (save) project in the. Film WMV
  format and see if it will play in Windows Media Player.

  See the following articles:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

  If you use "Windows Live Movie Maker"... See the
  following video tutorial:

  How to save the project in Windows Live Movie Maker
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o FWIW... If you have used. Music mp3... There could be
  problems of compatibility... converting them to the. WMA
  format before you import into Movie Maker can be useful to
  a test:

  There are many converters available on the net... the
  the following link is an example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your music files on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

• Computer freezes (and screen changes colors) when playing games with Windows 7

  I upgraded from Windows Vista to Windows 7 view a month ago and since then I had problems. I'm going to play a game like Left 4 Dead 2, World of Warcraft, counter-strike: Source, etc and I suddenly freezes. My screen freezes and the colors a bit (some of the colors will turn red and some of the colors will turn to a brighter color, etc.). The sound will also freeze and repeat a few milliseconds what it was. My computer is plugged into a power bar and is kept nice and cold, with a fan who helps him at all times and my window still open - there is some dust out there but I don't think she'd cela.

  This happens maybe once or twice every two days, and it has never happened when I'm not in a game. It is not a memory problem, I'm only using about 2 GB, 3 GB when it arrives. I always end up having to press the power button on my computer to restart it.

  Help, please.

  Tyvak,
  The first suggestion that Aziz has is not the map upgrade but for the driver update.  After the upgrade to Windows 7, you must update all the drivers for your hardware (graphics, sound, NETWORK, card etc...).  The best way to do it is to go on the hardware manufacturer's website and get the latest drivers.  If you have a name brand PC (Dell, HP, etc.) then they usually all drivers for the hardware, but some (usually the drivers graphics) is perhaps not the most recent.  First, make sure that your drivers are up to date and then test the games. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have an optiplex 745 windows vista ultimate and it keeps freezing.

  Original title: freezing problem

  I have an optiplex 745 windows vista ultimate and it keeps freezing. Can someone please?

  Hello

  See if this helps you:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Update drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea to run the System File Checker tool if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

  If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.