Vista hangs at crcdisk.sys

Similar Questions

• Problem at startup with Vista - hang at crcdisk.sys - green bar still there

  Hello

  I have a big problem and I'm not able to find a problem.

  My laptop (Lifebook, Fujitsu A6200) always hang at startup when the green bar with the windows logo is moving (I restarted after 3 hours).

  When I starts in Mode safe, it hangs on CRCDISK. SYS. I left it run for 2 hours and it restarted somewhere in this period.

  I tried the Drivers and applications of restore disc that came with my laptop and it never found problems. I ran the startup of more than 8 hours repair and the balance sheet was not finished.

  I plugged my hard drive on another PC so I can access my data correctly, it is not a hard drive problem.

  I have not installed any application or any new hardware in the weeks before the problem appeared with the exception of the automatic updates of Windows. I don't think that the problem is a hardware problem.

  If possible, I don't want to reinstall windows.

  Thanks for your help!

  Chris

  Hi Chris,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Use system recovery tools to fix the problem, to access system recovery tools. To do this, follow the steps mentioned in the link below:

  How to access the System Recovery Options menu?

  See also the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  (a) System Restore: put the computer to an earlier point in time when the computer was working fine.

  (b) order to access Windows Recovery: run the disk check to repair bad sectors on the hard disk.

  At the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk /r , and then press ENTER.

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  (c) run the Windows Memory Diagnostic tool

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why Vista stuck on crcdisk.sys on my pc tailor-made with a new HARD drive?

  Hello, forums:

  Okay, so I have problems with a full installation of Windows Vista (x 32).  I get the mode safe mode crcdisk.sys freeze with.  Normal mode is just stuck on a loading green bar slooow.

  Now, I've read countless sites on this issue, but nothing seemed to work.  All those who have problems had a pre-built system, or has been updated to XP.  I don't have that a facility tailor-made with nothing else on.  I know that said first thing would be to delete the c:\windows\system32\drivers\sptd.sys and pcmcia.sys, but I tried this several times and nothing starts later.

  Here are the specs of my machine:

  Motherboard Gigabyte H67M-D2-B3
  2 x 2 GB of ram (I removed a stick for installation)
  Intel i5 processor

  I do not use a wireless card on this pc, ethernet only.

  In addition, nothing based on USB are connected at present.

  Hello

  This means that you can try, but I would check carefully the disc 1.

  How to do a clean install with a Windows 7 upgrade Version
  http://www.SevenForums.com/tutorials/31402-clean-install-upgrade-Windows-7-version.html

  The best source of information would come from the manufacturer of your motherboard Support, their
  online resources and the drivers and ask in their forums (if any) of known issues.
  Many manufacturers have information specifically address their models to Windows 7 upgrade.

  Support for Gigabyte
  http://www.gigabyte.com/support-downloads/technical-support.aspx

  Gigabyte Downloads
  http://www.gigabyte.com/support-Downloads/Download-Center.aspx

  -------------------

  If the player is viable is the system (BIOS, ChipSet Drivers and key device drivers)
  Windows 7 ready and are all the major device compatible?

  Get to know Windows 7, including the upgrade
  http://www.Microsoft.com/Windows/Windows-7/default.aspx

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  Run the Upgrade Advisor, and check with the center of compatibility for your key features.
  Some system manufacturers also have an online help and information for the upgrade to Windows 7.

  Windows 7 Upgrade Advisor<-- run="" this="" before="" upgrading="" if="" possible="" and="" even="">
  upgrade to Windows 7 if it's the only way. http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Also check the Compatibility Center for major appliances before the upgrade.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  I hope this helps.

• Error Vista crcdisk.sys Tecra A4

  When the beta version of Vista came out several people had problems installing where start-ups would stop at the first reboot to "crcdisk'sys '.

  I followed the MS forums, but also here, but never found a solution.

  Has anyone installed Vista Beta on a Tecra A4 again? If so, what is the secret?

  Any help appreciated

  Salamat

  Just downloaded and installed build 5536 and still no change... can't get through first boot and safe mode always stops to "crcdisk'sys '.

  Someone at - it suggestions to get around this please?

  Salamat

• Error Vista crcdisk.sys Tecra A4 - solution

  Hello world!

  I have create this post to share my experience of installing vista on a Tecra A4 (tecra a4 257 to be precise)

  to be brief, the first time that the installation of vista freeze, it is on the famous "crcdisk.sys" in safe mode
  ---> solution: reboot on the installation DVD and go to "repair my computer" then the command prompt to delete/rename \windows\system32\drivers\pcmcia.sys and \windows\system32\driverstore\filerepository\pcmci ablablabla

  But even after that, I'm not able to complete the installation because I uncounter the famous 'black screen of death' (more precise, after the first restart, Setup will "finish installation" and after a while, the screen goes white and my laptop freeze without HDD activity more)
  ---> solution: after remove/rename pcmcia.sys e.a., delete/rename all the files on your Texas instruments PCIxx21 because it is this f * ing material that make vista freezing!

  so I renamed all the files in the windows\system32\drivers folder named * 1394 * (for firewire controller that belongs to a TI PCIxx21) as well as in the \windows\system32\driverstore\filerepository\ and \windows\inf\ folder
  I have renamed in the same files all files named sd * (for the reader of card memory, another part of TI PCIxx21)

  After that installation is finished and I was able to see vista and aero for the first time (sniff...)

  I hope that someone help :-)

  Sly

  Nice tips.
  I think all information on Vista are very useful to us because it s a new OS and there are always a lot of questions.
  Thank you very much.

• Windows Vista update: STOP 0x0000007b on crcdisk.sys

  I tried to apply the patches via Windows Update February, twice, twice completely streaked my Vista installation.

  What happens is that Windows Update downloads updates and application restart. The restart ends at STOP 0x0000007b.
  If I then boot in safe mode, I can see the boot process stop for about a minute with crcdisk.sys displayed, followed by the BSOD.
  The parameters are: STOP 0x0000007b (0x0c0000000e, 0 x 000000000, 0x080399bb0, 0 x 0000000).
  This happens both to the normal boot and safe, so the only solution I found was to reimage the computer.

  I have on my firewall on the computer 1, 2 anti-virus and 1 products anti-intrusion and surf using Firefox with several security extensions, so I guess that my computer is not infected.

  Ideas patch that is responsible for the problem and how to avoid it?

  However, I am not infected with rootkit Alureon, I have set my computer with Avast, Malwarebytes, McAfee and Spybot S & D scan.
  So I doubt rather requests above that Alureon is the sole cause of the BSOD.

  Rootkit TDSS [AKA Trojan W32/Alureon] has silently the net
  
  TDSS rootkit 3rd variant is the last member of the Tdss rootkit family that is spreading quickly all over the world. While a number of rootkits is just developed as a proof of concept, this is not the case. TDSS rootkit is well known corporate antivirus because of his goal to get full control over the infected computers and to use them as zombies for its botnet.

  During these years, that he has always shown a team of skilled people behind it, which always applied advanced techniques often able to bypass antirootkit software. In fact, this last Variant can be easily named as the stealth rootkit in the wild.

  This infection is having all the best of MBR rootkit, the best of the Rustock.C and the experience of the old Tdss variants. The result is an infection that spreads quickly on the net and it is not detected by almost all security software and 3rd party anti rootkit software. [emphasis]

  .. [20 Nov-09] terms no antirootkit is able to bypass disk filtering technical used by Tdss rootkit but, even if it were possible, this rootkit could not be detected by file size cross check because the size of infected files and original file are exactly the same.
  
  http://www.prevx.com/blog/139/TDSS-rootkit-silently-owns-the-net.html

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• BSOD on startup Vista crcdisk.sys

  Hello.
  I just installed Vista SP2.

  Rebooted and everything went well.

  I've also updated my BIOS of motherboard (Intel G35EC) to its latest version.
  At the next restart I got BSOD, and the system restarted before I could read anything.

  I tried 'Safe Mode'. It loads the files, and then gets the file: crcdisk.sys crashes for a few seconds and then restarts.
  I tried to change the settings for the SATA controller to IDE emulation still with no success.

  What could be? How I can fix?

  Thank you.

  Uh, did him updated BIOS might have something to do with it?
  He has clearly stated that it has installed SP2, rebooted and everything was fine, then it has updated its BIOS and now he has problems.

  Thank you

• Failure of Windows Vista and the SafeMode of startup failure - crcdisk.sys

  Hello

  I have a Dell Inspiron laptop computer 2 GB RAM. He had a few months now, and everything has been fine.

  Started a few days ago from freezing occasionally so I was forced to restart. CTRL + ALT + DELETE has refused to do anything and so I had to manually remove the battery.

  A frozen about three times and then once rebooted showed the BSOD saying something the system failure.

  So I rebooted once more and now it restarts just without going on the login screen. I tried to run in safe mode, but it gets stuck on crcdisk.sys or goes in an endless process to restart again.

  Is there anyway that I might be able to get back on without doing a full factory reset, as I have all my work stored on the hard drive integrated without backup.

  I can open the system recovery options, but none of these options seem to work. All my points of recovery have been removed.

  Startup Repair doesn't indicate a problem with the system, so I thought maybe it was a virus? The same thing happened to my wife a few days ago computer and that uses the same Wifi network as me.

  Jacob.

  To search for malicious software, you must do in Mode safe mode with networking, but you say that you can not get the Options.

  There is information below data recovery.

  And Startup Repair Info, too.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Computer stops during startup, Vista crcdisk.sys

  When I try to turn on my computer, I get a screen saying that Windows is not shut down properly. It gives me the opportunity to launch startup repair or start windows normally. With option, I get the black screen with the green bar for maybe 3-4 seconds before my computer turn off suddenly. I tried to hit f8 and have advanced boot options. With one of the security modes selected, I see loading files. The last file I see is crcdisk.sys and then the computer shuts down. I thought maybe it was a start power supply problem but by replacing the power supply did not solve the problem.  I tried to boot from the disc of the operating system that came with the computer, after "loading windows files" it does the same thing and stop at the black screen with the green bar. I downloaded a Vista recovery disk and tried to boot from that, same result.

  Ideas/suggestions on how to solve this problem would be appreciated.

  Looks like you have a hardware problem - most likely with your hard drive, but perhaps also something else.  I recommend that take you to a repair shop of computer with a good reputation for the service (NOT Geek Squad or any company like that).  Or you can send it to the manufacturer for service (compare costs, benefits, schedule, availability of parts, effort, reliability, and anything else feel you is important and make a decision).  If you can, try to back up your data first, as it is likely the drive will be wiped clean in the process.

  You can use Knoppixhttp://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (made on a different computer).  Boot this disk.  This should give you enough access to the system (if you do not have any other means) to backup your important data.  If this does not work, try to remove the hard drive and it enslavement to another computer and use this computer to access the drive and back up the data.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista Home 32 x does not start - freezes on crcdisk.sys - need to determine if a hardware error or pilot

  I have Vista 32 running on HP Pavilion DV6345. Screen goes black after the green bars. Safe mode crcdisk.sys is taken. Can not enter in the command prompt, can't go to last good configuration known, nothing. I tried vista recover cd - nothing. tried to reinstall vista and it remains on "Please wait" indefinitely. Can not access drive c through the command line with the installation cd - I get "cannot lock the current drive" and it is write protected... If my HD is damaged? Any ideas? Thank you

  Mark

  http://welcome.HP.com/country/us/en/contact_us.html

  If you are unable to use HP recovery disk, contact HP.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows VISTA does not start - shows a green bar horizontal scrolling forever, safe mode stops at crcdisk.sys

  Windows Vista does not start.  It shows the horizontal scrolling green bar with microsoft (c) and then goes to a black screen with the mouse arrow that moves. Start in safe mode loads the drivers to the extent of the crcdisk.sys but meet once again at the black screen with the mouse arrow.   Have not the SATA drives connected.  Impossible to get to the command prompt to delete all files.  No work from safe mode.  Restore computer does not work.  I have looked at other posts regarding the renaming/deleting files, but cannot get to the command prompt to resolve this problem.  The computer is less than 2 years.

  Toshiba Satellite A205-S5831, dual processor running.  Running Windows Vista BASIC.  Hard drive seems to work, lighting, well working properly, no error at startup.  No perifpherals or a mouse, or a USB attached.  Disabling USB does not boot.

  Can someone give a help?

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

  See you soon.

  Mick Murphy - Microsoft partner

• crcdisk.sys interruption during the startup of Vista Basic on an E-machine

  Backround:

  I worked on this machine for about a week.  I'm sure it's a softeware and not a problem with the hardware to 90%.  I ran Startup Repair and corrects a problem with startups rehearsal where the machine would be blocking and I had to cut the power to restart the machine.  (By the way, the disk image I created with my machine for system recovery XP works fine but ultimately that the machine always stops before leaving).

  I don't think that the file crcdisk.sys is the problem.  I think it's loading the driver after that, but I knew how to say that whoever is.  I didn't go to c:/windows/system32/drivers and all files replaced by files from the backup of the system part and once again had the same problem.  The next thing I plan to do is to replace the directory with that of another Vista machine, but I did not understand how to get the files from one computer to another.

  Also, while searching with the command prompt, I discovered a number of files and directories that are as of 01/01/2029 to 03/01/2029.  It seems that some of these files are used, but I can't say to what extent.  I would also like to know where they came from since I never changed the date on this machine.  This difference in date might be part of the problem.

  The machine is preinstalled and I have no starup disk.  I tried to create with my other Vista machine, but he does not like my records.  Depending on the machine, they should be DVD/R, which is what I have.  Can what I missed and if I manage to create discs I use it on this computer to format and reinstall?

  Thanks in advance for your answer.

  Recovery discs are made for an individual, make and model computer.

  http://www.eMachines.com/support/product_support.html

  For any questions/problems re eMachines recovery process, contact eMachines to the link above.

  This isn't their recovery process, Microsoft.

  Contact eMachines and ask them to send you a set of recovery Vista disc/s.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows error crcdisk.sys

  Hi, I had this problem when windows Vista would not start and would hang crcdisk.sys even in safe mode.
  I tried to format my HDD, partition and everything and reinstall Vista and there 95% of installation and after the last boot it STILL shows to be suspended on the SAME file.

  I have no hardware changes on my laptop (Acer Aspire 5920) and don't know where to go from here...

  http://www.Acer.com/worldwide/support/index.htm

  Above is the Acer Support link.

  If Acer eRecovery does not resolve your issue, contact Acer.

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  3. the Windows version of the eRecovery program is stronger then the Dos Version. Below you will find the various features of the Windows version:

  Recovery settings: create backup files and change password

  ·        Picture of the backup snapshot (create a disk image of your system configuration)

  1. the system is able to make a CD/DVD image of the current state of mobile software including customer programs installed.

  2. This CD/DVD is usable in Windows and DOS of the program version.

  3. the drive should start, but isn't always.

  4 when a snapshot is in fact the image is on the D: partition and then can be burned to disc if eRecovery is said to.

  ·        Burn the Image to disc (create a backup disk)

  1. you can create 3-7 CD or DVD 1-2 such as those that were sent with the units before eRecovery.

  2. the serious CD are equal in usage to the system recovery CD and CD

  ·        Remove data from backup image of capture instant user (if available)

  1. This is how delete you the snapshot on the D: partition images

  ·        Password: (change the eRecovery password)

  1. measures: restore your system using an existing backup file or restore the default configuration in your system factory.

  2 backup copy using one of the snapshots has been filed or the original image on the D: partition.

  4. made eRecovery

  ·        When the hard drive is replaced the system loses its characteristics eRecovery. These features are on the hard drive and cannot be reinstalled.

  ·        When reinstalling from the CD/DVD's you will lose the eRecovery program but the DOS version can still function, as if uninstalled, you can not reinstall.

  ·        eRecovery uses Ghost (as well as the use of our recovery CD) to create snapshot images.

  ·        If the PQService partition is removed using fdisk or a utility under Windows, you may need to reinstall Windows.

  ·        If the system is recharged using the DOS version, you will retain the eRecovery feature.

  Mick Murphy - Microsoft partner

• Keyboard causes Vista hang on startup/gel when it is plugged

  So I seem to have a rather unusual problem.

  When I boot vista and my Wired USB keyboard Logitech is plugged, Vista hangs at a black screen after that bar loading screen and my optical USB Wired mouse green turns off (in safe mode it seems to hang crcdisk.sys).  If I don't have my wired keyboard but I have not my wired mouse Vista starts fine but when I try to plug in the keyboard Vista crashes and I can't move the cursor.  It doesn't seem to be a work autour: if I leave the mouse and the keyboard unplugged and plug them in to at about the same time after that Vista starts, both work very well.  In fact, I can unplug the keyboard and reconnect it back with no problem.

  I recently bought a new hard drive and had to install Vista on it.  This problem appeared to occur at the time, I installed SP1 and persisted in my current state to SP2.

  I tried to update the drivers while the keyboard works by both windows as well as search download driver of Logitech Web site.  I do not have another keyboard I could try, but it worked well before re-installing my Vista and works fine on my laptop (which is running XP).

  Any ideas?

  Of course, looks like it's maybe the keyboard if the drivers are up-to-date.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My computer blocked at crcdisk.sys and do not start correctly.

  Original title: my computer does not start correctly

  my computer does not start up correctly it keeps stuck on the pilot after \crcdisk.sys on windows 32 - bit home premim

  I have the productkey

  Hello

  1. you start your computer in safe mode? If Yes, it works very well when you start your computer in normal mode?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can start your computer in last good known Configuration mode.

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2

  We can repair the startup of the system recovery options.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 3

  You can perform system recovery options system restore.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Post your answer for you help in this matter.