Vista has started to run much more slowly recently
Original title: Vista began to run more slowly recently
In addition to the advice of Ken, try a clean boot and see if the problem persists. If it does not add then points back until you can identify the problem. Also, check the startup folder for programs that do not need to run until needed. Looks like it's a program, service or process that tries to perform a task, but fails to complete.
http://support.Microsoft.com/kb/331796
This article includes a fix button.
A clean boot is a very effective method of diagnosis.
Colin Barnhorst
Tags: Windows
Similar Questions
-
Vista has started with a normal window then changes to one with zoom 150 and no navigation
After my computer did an automatic update, the screen changed. It starts with a normal screen but then goes to a 150% or more with no navigation or any level of zoom in the status bar. So cannot use Control Panel controls to adjust the screen resolution, want to do? Do not have original install disks that the computer came preloaded.
Hello
If you could get in Control Panel, you can use the ENTER key to OK to change settings
and read this;
There are a number of things to try:
try going to your graphic card manufacturers site or computer and are looking for the driver download section
Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista
then try to make the screen of solution of problems
http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution
Change the screen resolution
__________________________________________________________
or try a restore of the system before this happened
http://www.windowsvistauserguide.com/system_restore.htm
If necessary do in safe mode
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
________________________________________________________
and change how to get updates for you to choose what you install to stop it happening again
You may need to install one at a time to find the problem, we
Make sure that you do not use Windows Update to install the drivers of 3rd material part
Find them directly in the hardware manufacturer
and when you see the problem update right click on it - UAC prompt - then hide it
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
______________________________________________________
Here are the different ways to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
____________________________________________________________
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
__________________________________________________________
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
____________________________________________________________
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
Satellite U400 rotates much more slowly now
My laptop Toshiba Satellite U400 running little slow and maybe because I have old drivers for:
* Intel(r) mobile 45 Express Chipset series controller processor to DRAM - 2A 40Yes because it shows that I have the version for this: 8.7.0.1007 * but the * NEW version * is: 9.1.1.1012 *.
Where can I get these new drivers please?BCZ like I said earlier, my laptop is slightly more runing slow now.
Thank you.
> Yes because it shows that I have the version for this: 8.7.0.1007 * but the NEW version is: 9.1.1.1012
> Where can I get these new drivers please?You have already posted a similar question here:
http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=176346I think you should follow only a single thread to avoid misunderstandings
-
Hello.
I make videos of marriage for a while. My material included map DV500DVD and first 6.5 CPU Core 2 Duo E8400, 2 GB of RAM, Windows XP SP1 (DV500 does not work with SP2 or SP3).
The above system is quite old and absolutely not usable for HD videos. So, I decided to build another machine. The configuration is the following:
OS: Windows 7 Professional 64 bit.
M/b: Asus LGA 1155, H67 chipset.
CPU: Intel Core i7 - 2600K
RAM: 4 GB DDR3
HARD drive: 2 x 64 GB SSD, 2 TB SATA (RAID) 4 x (all drives connected to separate the controller PCI-E chipset fault intel isn't a problem here)
I recently downloaded and installed the first Pro CS5 trial version, to see how he adapts to my needs. And I'm very disappointed. I started the first, chosen preset widescreen DV, inserted two static images on the timeline and made a mix alpha between them. Then put movie export. Not only it took too long to make, but it only used a nucleus, and the CPU usage is only 15%. Just out of curiosity, I installed first 6.5 on the same system, and he did this task about 10 times faster!
That is, limitation of the trial version, or just first Pro CS5 cannot be used with this modern processor?
Thanks in advance,
Alex
I can understand your experience... After I installed Windows 7 and CS5 Production Premium, adding another 8 Gig of Ram for my PC, dying on the fact that my Nvidia Quadro FX 4600 is not able to use the reading mercury and literally hours of waiting for spending returns, on a hunch, and after reading about someone else who did the same thing. Finally, I took my old PP CS3 and installed on alongside first CS5. To my surprise, with 64-bit OS, CS3 running and makes exactly the same content about 4 times faster, does not idiosyncratic seizures slow when moving clips in the timeline, no white on the error screen "not responding" messages, etc.etc. I have no problem with After Effects or Photoshop CS5, they work fine, but first CS5 is close not functional as it gets. A: 30 minutes with some effects of magic bullet, even native capture HDV format takes about 10 minutes with PPCS3... and about 45 minutes with CS5. CS3 also reads smoother and barely stutters, so that I have to sit and to return with CS5 because of choking in order to continue working. One post suggested that I don't have enough gas in the machine, dual core AMD Opterons 3.2 GHZ, disks, 16 Gig ram working 7200 and 10 000 rpm... but cannot see how CS5 can maybe make CS3 on the same stage. What I'm missing here? I'm not whining just baffled.
-
About a week or two ago, I received a call from someone who said it was the appeal of WINDOWS. My PCwas work perfect, but I was told there were problems.
I did not understand what problems he spoke and asked him if he had the right number. He did not ask my number when I said that if I
told him to send me a letterexplaining the problem, if something is wrong. Then, I clung to the top. Is that what you received no other complaints like that? The
next time I used the PC, something is indeed wrong - it is very slow now. I guess that Microsoft would call, not "windows". In fact
I do not believe that Microsoft would call either. Is that what sounds like someone hacked into my PC or what? Thanks for any help.
On Wednesday, September 5, 2012 18:56:47 + 0000, MartyZA wrote:
About a week or two ago, I received a call from someone who said it was the appeal of WINDOWS. My PCwas work perfect, but I was told there were problems.
I did not understand what problems he spoke and asked him if he had the right number. He did not ask my number when I said that if I
told him to send me a letterexplaining the problem, if something is wrong. Then, I clung to the top. Is that what you received no other complaints like that? The
next time I used the PC, something is indeed wrong - it is very slow now. I guess that Microsoft would call, not "windows". In fact
I do not believe that Microsoft would call either. Is that what sounds like someone hacked into my PC or what? Thanks for any help.
It was a scam and your hang up was wise. If you gave him no
in your computer, he didn't hack it.Ken Blake, Microsoft MVP
-
why every windows vista has windows media center and more for Home Basic?
WHY OH WHY
WHY OH WHY
It is simply a lighter version. See the other post you have does, no plans.
Know what you buy.
Ron
-
Why vista sp2 usually start with 2 or more GB of ram
Why vista sp2 usually start with 2 or more GB of ram
Hello
To better assist you, please provide the following details:
(1) what happens when you start the computer with 2 or more GB of ram?
(2) if it works well before?
(3) remember to make changes?
It is sufficient to indicate the complete error message you receive.
You can run the memory diagnostic tool
How will I know if my computer has a memory problem?
http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problemThank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
*************************************************************************** -
Vista has stopped turning the games run for a long time.
Vista has stopped turning the games run for a long time. The display would go crazy and the sytem would lock. Gotta make a stop with the power button. No errors are recorded. I re-installed the game. Same thing. I reinstalled Vista 64. Same thing. I get about 3 minutes in the game and then locking the. 1 single game still work (BioShock2). COD - MW2 and COD MW lock the sytem. One is direct install, and the other is the steam. I have a video card Nvidia GTX 280 with the latest drivers from Microsoft. Before the reinstall, I tried to install the most recent NVIDIA. Did not help. Yet the locks without showing error. About half of the time it stops at my off video card a few seconds after that the display goes crazy. BioShock uses DirectX 10, and others use DirectX 11. I read on some sites that 11 causes the video crashes on some systems. I want to know is why 11 is working for so long and stop NOW. Is there a way to make the games all run on 10? COD BlackOPS crashes too. I played ALL these games over and over again until the last 3 weeks. If there was some error to post logs I would but there is not. Any suggestions on where to find some kind of problem that could cause this? The video card was removed, cleaned and put back into the computer. Still crashes. 1 in 4 of the games will take place without any problems. 3 will be blocking of the computer and the video trash in 3 minutes or less to start the game. The video is great, until blocking.
Suggestions on how to fix or where to additional troubleshooting for the cause will be greatly appreciated.
Try running the memory and the hard drive scan to make sure that both are good.
http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errorsIf both check good, the map may be at fault. In which case it is overheating you can manually increase the fan speed in the Nvidia Control Panel.
-
I get the error message is: AC power adapter type cannot be determined. Your system will run more slowly and the battery won't charge.
Hello
(1) when you receive this error message?
(2) what is the brand and model of your computer?
(3) did you change on your computer before this problem?
It seems that the adapter has gone wrong, I suggest you to connect another card and see if the problem still occurs.
You can also contact the computer manufacturer for assistance on this issue. -
After that the most recent windows update, my computer starts a little more slowly and the start bar at the bottom rises gray and rasterized. In addition, all pages that I opened on the internet are coming with the same blocks of old, gray. Any ideas on what was past, and how to fix it?
Original title: old start bar
Right-click on your desktop, go to customize and then make sure that any theme in the 'Aero' section is currently selected.
-
What installation Lr 6 to a disc, I get an error message that says OS obligation has not met. Windows Vista not supported. Vista has never been installed on this PC. Operating system is Windows 7. What now?
Copy the installation files to a desktop directory.
Right-click on the Setup file in this directory > click Properties > compatibility > win 7 > ok: Finally, double-click the configuration file.
-
Is it possible to change the menu of windows update to the much more functional version?
Is it possible to change the menu of windows update to the much more functional version? The change took place on 07/10/09 and made by selecting which updates to install more troublesome. * Note * I do without roll back Windows Update 7.4.7600.226 Agent that has been installed on 10/07/09.
This change of format is also just change the switch on for windows 7?Hello
Welcome to Microsoft Windows Vista community forums!
I am sorry to say that there is no choice left out. You must perform a system restore or uninstall the manual update that is installed.
Improvements made to the version of the Windows Update Agent 7.4.7600.226
- Time sweep improved for Windows updates
- Improved user interface for Windows Vista and Windows Server 2008 - based computers that are running Windows Update
- More visible and detailed description of updates
- Improvements in the way in which users are informed about service packs
For more information, please see the link below:
http://support.Microsoft.com/default.aspx/KB/946928Kind regards
Savan - Microsoft technical support.
-
My computer caught a SERIOUS virus that damaged my beta Windows Vista together. So I've upgraded to Windows 7, however, I have not the key product for Windows Vista or 7. Is it possible to set this up with Windows Vista or 7 because my product key for computers, which was at the back of it, has been erased or worn. There is no name on the back of my laptop sticker saying what product key to use. Thank you!
Friday, February 11, 2011, 05:49:31 + 0000, EShoals wrote:
My computer caught a SERIOUS virus that damaged my beta Windows Vista together.
What virus? How did you know you had it? You run an anti-virus
the program? Which one? Is it updated? Why don't you use not to
remove the virus?So I had to upgrade to Windows 7,
Ugh! The upgrade to a different version of Windows does not remove a virus. In
did the upgrade when you have a problem is always a bad
thing to do and will be much more likely to make the problem worse than in
solve it.However, I have not the key product for Windows Vista or 7.
Where have you upgraded to Windows 7? Upgrade to a
legitimate version Windows7 is a bad thing, but if you went to one
a pirated version, it is likely to cause additional problems and you
are probably in trouble now and need to clean install a
copy legitimate of some versions of Windows.Is there a way to set up in Windows Vista or 7 because
my product key for computers, which was at the back of it, has
has been deleted or worn. There is no name on the back of my
laptop computer sticker saying what product key to use. Thank you!The product key on the back of your laptop is for what version of
Windows it came with and may not be used for all other versions. If you
don't have a product key for Vista or Windows 7, the laptop
no doubt supplied with XP. Is this correct?If it came with XP, it is very old and it is almost certainly elsewhere
low power for Windows 7. In addition the drivers you need for Windows
7 there are almost certainly not, and you will not be able to run
Windows 7 on it.At this point, you are probably in trouble no matter what you do. You
must reinstall Windows XP itself, but you no longer have your
product key and you probably haven't a Windows XP CD no more. You
can try to ask the manufacturer of the laptop to a XP CD and product
key, but I doubt if you can get at this late date.You can buy a copy of Windows 7, but once, you are likely in a way
low power for the drivers you need and it will be unavailable.Ken Blake (MS-MVP)
-
Flash CS3 Pro CS6: games works more slowly?
Good, everyone. I will try to explain the problem I encounter as concise as I can:
I just got a new iMac (10.8.2) and I got all my stuff in CS3 hover over with a transfer system. However, Flash CS3 has this message "error initializing java runtime environment" and I can't get it repaired despite the number of 'solutions' that I found, mainly because the patches are for older versions of Mac and its operating systems. That said, if anyone has found a fix for this problem on the new iMacs and operating systems, please let me know and ignore everything that I'm about to ask questions on below.
However, I decided to give a whirl CS6 and see if I should go ahead and upgrade to one. The problem that I am running is disconcerting say the least. I was doing a game in Flash CS3 and Actionscript 3 on my old Macbook Pro (2007-2008ish) and I managed to run at a solid 60 frames per second. This is not really surprising, given how little there is in the game so far, but I am concerned that they run slower when running through Flash CS6 on a computer more recent (2.9 Ghz Intel Core i5, 8 GB of RAM, NVIDIA GeForce GT 650 M 512 MB).
I tested the executable (.app) both the .swf, and both run much slower than they should. Cadence plunges even when there is nothing on the screen except for the character and background. Curiously, if I have the game running in Flash Player 9, it works fine, but everything else (10 and more) runs significantly more bad.
Anyone know why the game will run more slowly? I even tried to use hardware acceleration, and there was no change whatsoever. If the files that I opened, .as files both .fla, were at the origin of the CS3 files? Creating CS6 files from scratch and then bring the content and code on would fix the problem?
Any other suggestions would be greatly appreciated. Thanks in advance,
Ian
Never experienced sth. Like this. It should not matter if you are publishing to Flash Player 9 (CS3) or 11 (CS6).
I even tried to use hardware acceleration
Hardware acceleration will be most often slow down your fps if you are not using the Stage3D/Starling features, you will need to disable your Flash Player via right click options, too, though. It would be my first guess would default to HwAcc a new installed Flash Player 11.5, so you must manually, turn off when it does.
If its possible for you: load 2 (CS3 - swf, CS6 - swf) Versions of your game to the top and post the link, then I could test it in Windows to see if his mayba a number Macrelated.
-
CS - 6 Prod Prem would work more slowly if loaded on a dedicated HARD disk
Aloha,
I have a custom built PC for video editing. I ran before CS - 4 on this machine until I improved things to prepare for CS - 6. The system has an AMD2 + PHENON QUAD CORE 2.3 GHz CPU, 8 GB of RAM, Radeon HD6750 vc. The OS is WIN7 SP1 has 15 GB of space left on a dedicated 60 GB SDD, (a primary of 100 MB partition resides here also who may or may not be part of the remaining space). My data, with no connection with what whether Adobe is located on 200 GB HARD drive, I have a drive HARD 250 GB to use for the cache files and preview a 500 GB of HARD drive to use for files of individual program CS-6 and a 1 TB of HARD drive to use for all source video and photos.
I am concerned about the free space remaining to 15 GB on the SDS where WIN7, when CS - 6 is such a Devourer of space hoarding 10.5 GBs leaving about as left of 4.5 GB for future use. I am wanting to know if I load CS - 6 on a partition on the HDD of 250 GB and use the rest of it for the cache files and preview it would run more slowly? I don't see the alternative to load on SDS with WIN7 and hope for the best.
Does anyone have any ideas?
Mahalo-n-aloha...
konadon
Windows itself can actually stop you install the files on your SSD if you're low on space. It will start more slowly at the launch of a disc paltter? Yes. It will be generally slower? N ° once loaded in mmemory, records don't matter beyond the file operations and swap...
Mylenium
Maybe you are looking for
-
I've been using Speed Dial for a long time and when I click on a button, usually a new page opens, leaving the available speed dial. Recently, whenever I click on a speed dial button, the new page opens instead of Speed Dial. I want new Speed Dial, I
-
Hello, I was thinking about buying an iMac, and I didn't know that one. As far as I know so far is that I want the 21.5 inch one, but he asked me all these upgrade options. I need help! I don't understand these THINGS. I don't know if I should ge
-
Satellite A10-S403D - new compatibility with WLAN cards
Hello My sister has a quite old but still good job * Satellite A010-laptop S403D *, which has been upgraded a bit during the time. The only problem we have is the Mini-PCI Wireless card, it seems that the chip Intel 802. 11 b is dead, the card is not
-
Pointer disappears quickly and wondered about all of control screen
Original title: pointer pointer disappears quickly and wondered about all of control screen
-
Windows 8 + Dell touchpad
I have recently upgraded to Windows 8 Pro but now scrolling on my Dell touchpad no longer works. I'm on a Dell Inspiron 1545 - have checked the Dell website for touchpad drivers but can't find for Windows 8... Can anyone help?