Vista has started with a normal window then changes to one with zoom 150 and no navigation

Similar Questions

• My 3 year old has played with the computer and now my screen is sideways. How should I do?

  My 3 year old has played with the computer and now my screen is sideways.  How should I do? I tried my computer and went through everything on the screen and doesn't change anything.

  Here's how to do hold Ctrl + Alt and then press the arrow keys on your keyboard.

  or right click on desktop, select options graphics then Rotation.

• I try to enter the serial number to register my software, but the label outside of the box, he's starting with the letters and it does not accept the letters... . Only numbers

  I try to enter the serial number to register my software, but the label outside of the box, he's starting with the letters and it does not accept the letters... . Only numbers

  Serial numbers contain no letters, so maybe it's your redemption code, for use on adobe.com to get your serial number.

  Here are a few links to look for more information

  https://helpx.Adobe.com/x-productkb/global/redemption-code-help.html#productboxorprepaidca rd

  Quickly find your serial number

• four digits starting with 1 0001 and not only the numbering.

  How do I re name and renumber a folder of photos and include four numbers starting with 1 0001 and not only the numbering. I need this for an another computer program can keep the images in numeric order

  Now I have number say marriage... 1 Smith_Jones ect up to 659, but a program that I use to create the albumes blurs all my photos because they say the digital system must have 4 digits so number 1 is 0001 so stay in order.  I have d see how to assign 3 zeros on numbers-# 344 front would therefore 0344 LR wants to keep 344.

  In the rename library use the following custom parameters.

  

• Windows Vista starts with empty office and the mouse cursor, then restarts

  I have trouble getting Vista to start on an Acer laptop.  The laptop is an Acer Aspire 6920 G with Windows Vista Home Premium 32 - bit on it.

  The PC will start in an empty office with stop mouse cursor on this screen for about a 1 min and then it restarts and you go through the same process again.  I tried the safe mode and last good configuration to know but get the same results.  I have also tried to run the Startup Repair tool and get the same screen.  I can launch Startup Repair to boot from a DVD of Vista Home Premium 32-bit and I can run but it makes no different.  When you restart, you get the same problem.

  Does anyone have an idea?

  No it isn't the trunk upwards with the black screen and the mouse.

  Hi KevinBricknall,

  1. have you made a recent software or hardware changes to the system?

  Since you are unable to run start up repair boot from the Vista disc, you can try to perform a system restore start from the disc and see if it helps.

  For more information, you can consult the following article:

  What are the system recovery options in Windows Vista?

  Hope this information is useful.

• Windows Vista does start with a black screen no mouse pointer.

  When I try to load vista is going just a black screen... the little green bar moves and jumps, then black screen. I am able to run in safe mode and I try to run notron and I get and internal program error code: 0x8007045a.  I can't connect to the internet as well as in the safe, do not know if this is normal. I doint at currintly run a restore in safe mode to see what happens.i am able to run the Startup Repair tool, but it does not solve the problem. If I bring the details of the problem, that's what I get

  problem event name: Startup Repair v2
  signature of the problem 01: auto failover
  signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  problem signature 03:6
  problem signature 04:262148
  signature of the problem 05: no root cuase
  signature of the 06 problem: no cause root
  problem signature 07:0
  signature of issue 08: 1
  signature of the 09 problem: System Restore
  problem signature 10:0
  OS version 6.0.6000.2.0.0.2561.
  locale ID: 1033

  Try to start in safe mode and in the type of research start devmgmt.msc and press ENTER.
  In Device Manager expand adapter screen and try to turn off the graphics card and verify if you are able to boot into normal mode.

  Also try to access http://support.microsoft.com/kb/929135

  Follow the steps described in the article and see if you can boot into normal mode.

  Hope this helps you solve the problem.

  Concerning

  Srini

• Vista guardian virus had now "open with:" starts with any program and I am trying to use files

  This morning when go to check my email program (vitsa guardian) told me that I had to and the trogns in all directions. I ran my antivirus notron and nothing came back as being detected. The vista guardian asked me to buy antivirus software to get rid of. This program would not let me use internet explore around it and went used the version of internet explore (no add-on) and google it. Discovered it was a virus which would be removed after the theft of credit card information. I downloaded a program of Fixer who rid my computer of the guadian vista but now whenever I try to open a program or file, "open with:" appears and even after the selection of the proprer program some does not mean corupte files of other errors. Help, please!
  Restore the system tried but nothing has changed.
  http://www.articlesbase.com/software-articles/Vista-guardian-removal-delete-this-spyware-off-your-PC-1802345.html is where I found help for vista guard

  Hello

  See the cleaning to get it open with problem solved once you are sure that the thief is gone (better to double check).

  Guardian of XP is the same as this:

  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
  Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
  the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files
  and reset the associations.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  To run a particular program until get them you all back to the normal fair use start - search and type in the
  program name or the name of the executable file - OR use start - computer or Windows Explorer to access to the
  program, and run it from there.

  Define your main program associations, and then you can edit any type of file to the correct program.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  How Unassociate a Type of Extension file in Vista and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Vista Home starts with black screen with blinking cursor

  Hi, I have a toshiba satellite with Vista home, he stopped last Sunday, when I turn it on, start it start sbooting normally but then I get a black screen with cursor and is not go further. I tried last good known, tired, safe mode, I have same TOSHIBA recovery disk and does not either, when I boot from the CD, it seems that it is loading files, then the yellow bar on the work screen appears, but then I get the black screen with cursor, nothing after that.

  I took out HD and a Sata drive via the usb port to connect to my HP laptop. I was able to open the F and G, but C drive (where the OS is installed which has changed the letter e) could not open, he told me I need to format it.

  I have the original recovery disk for Toshiba, which works when the hard drive is not in the Toshiba, but when I put the hard drive back, I never the option where it asks me to repair or reinstall all.

  is it possible that I can use my laptop HP after the toshiba drive connected via USB, to repair the toshiba C partition (which is called E)?

  There are more than 2 weeks worth of work that are not backed up, and I wouldn't lose. Help, please.

  Hi MB1969,

  This seems like a hard disk failure. You must get in touch with Toshiba to get help.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

• I am familiar with most Adobe products, I want to start with the PS and then upgrade to the full cloud

  Of course, the road less expensive is to make an annual plan. is it possible to start with photoshop for 4 to 6 months and then move all products without breaking the plan all right?

  Single update for all http://forums.adobe.com/thread/1235382 clouds can help

• Boots Vista black screen with white cursor and nothing else (Black Screen of Death)

  After a download from Microsoft update last week, my system has rebooted. He first had a screen blue error, rebooted, reported a disk error and automatically run CHKDSK. Since then, the system has started a black with white slider screen and nothing else. This happens at startup options (Normal, safe, safe with the last command good known configuration). Not even sticky keys would come to the top. CTRL-Alt-Delete, Ctrl-Alt-Esc and all other keys has nothing did. Even with a right click.

  I searched all over the web for solutions. I found (and tried) several over the past week, but nothing has worked.

  Here's what I tried...

  F8 held key on boot to the top and entered the startup recovery. Ran of recovery. Initially so found of disk errors. Those fixed. Then he said he could not repair the system and reported two pilot errors.

  Tried system restore. He said that I had no restore points (even if I know that I had before).

  With the help of recovery options, I went to the command prompt. Asked to RegEdit and load the Software hive. Checked the connection entry Windows NT; made sure, it has been set to explorer.exe

  The system, checked RpcSs Key hive. Already the NT AUTHORITY\NetworkService value

  Renamed event connects winevt and not create the Logs folder

  Removed the hard drive. Attached to another system (as slaves), and the registered file permissions. They have screwed everything up. The fixed file permissions and drive put back in original system.

  Œuvres self-retaining keys now. Do not, however, as my sticky keys doesn't have a link to configuration.

  Went back into recovery startup via the F8 key at startup. Now, when I run start recovery, it says that everything is going well and there is no problem.

  I have download the hotfix from article 977675 Microsoft, but I don't know how I can apply it without being able to get into windows. I would like to contact MS e-mail or chat support, but I can't get the product ID without being able to connect (frustrating talk).

  I would like to reinstall OS, but HP does not provide an installation disc with their systems (only a full restore partition). My system is backed up (with the exception of the Windows folder), but I really don't want to have to make a full recovery, as I have a lot of specialized programs and settings that would probably take me a week to re - install and re - set.

  Anyone have any new ideas?

  Hello

  Here's my usual BlackScreen convenience store, because it may be that you haven't tried
  or if you have access you might be able to come back and start some of them.

  ----------------------------------------------------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• SatelliteU300 will not start with power connected and fully charged battery

  I just bought a U300-13U. It works fine when charging the battery and AC is connected. However, if left to recharge completely it does not start with connected AC. Unpluging the power or remove the battery and running on AC make it work very well. Is a 'feature' to stop an overload or overheating of the battery, or just a problem with this machine. I want to run with AC and battery than both connected all the time like I did with all my other laptops.

  Any help appreciated.

  Hello Andy

  Of my friends has this small U300 and everything works well. I got it a few weeks ago to test the family Windows XP Setup and it works perfectly.

  Please test again very carefully and if the same thing happen again once I recommend you contact the Service partner in your country. They check your laptop. I have to be honest and say that describes the problem of strange sounds to me and please, don't wait too long. Contact the service as soon as possible.

  Bye and good luck!

• HP 6735 s starts with no backlight, and there is no way to adjust it

  Hello

  I have a notebook 6735 s with processor Sempron SI40. One day, I turned on and realized that theres no backlight or something. The following occurs:

  1. the screen is powered, but it's so dark that I can barelly see "HP"-logo at startup (at first, I thought that the screen is not in power, but on consideration, I see something on this topic) ".

  2. it is used to "quick buttons" to set the backlight (at startup and loading windows)

  3. There is no use for the reset of the Bios. (no change)

  A bit more on this issue. I can see what is on the screen, if I take a flashlight and point it on screen, but still if barelly I can't yet read Bios options sometimes. Windows starts OK, and the issue has no effect on it.

  I tried to disconnect a battery and unplug the laptop for half an hour, but nothing has changed.

  Could you please help?

  Backlight Inverter laptop computer Google, it is a small board mounted behind you screen bezel that generates power for display tube backlight ccfl.

  If you do not feel confident in evolution, you can take your laptop to most of the mechanics who should be able to do while you wait "assuming you have the part" a search under your laptop model the INVERTER supplement on eby should produce some alternatives to high prices.

  Please note if your laptop is under any kind of warranty that it is, you should not attempt to repair yourself to allow other users to-other than HP.

  If you can find the service manual for your laptop must be some instructions to change the easy to follow ups.

  Good luck

  TBC

• Why my DVD does not start with the film and not on the menu?

  HI -.

  I'm just starting to use yet.

  I import my film as a timeline, my PSD as a Menu, link the button in the menu to the timeline and tie the end to the Timeline action to return to the Menu.  I get no error, when I check prior to construction.

  But when I play the DVD, the menu is entirely ignored.  The movie just started.  End action works and I can navigate the Menu using the remote control, but I want the disc to start with the Menu.

  What Miss me?

  TIA your instruction.

  JL

  Hello

  In this case, first of all, I would check my first piece of the project. You can check the first play in the drive properties in the properties panel.

  Click on the disk icon in the window of the chart and look at the properties of the disc in the properties panel.

  If you want your menu to play first you insert the disc in the drive, then this menu must be set as the first piece of theatre.

  I hope this works.

  Thank you

  Ramesh.

• start with white screen and a page named do not work

  Firefox always start with most recent screen.

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  The user.js file will be present if you or a other software created this file and normally will not present.

  You can check its contents with a text editor (right click: 'Open with'; do not double-click).
  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can remove the user.js file if you do not create this file yourself.

  Do not change the line browser.sessionstore.resume_session_once and change its value to false, but either delete this line or remove the user.js file (recommended if you have not created this file).
  The normal use of this pref is to reload the tabs when you need to restart Firefox (update or install an extension).

• All my programs has changed to one. LNK file and does not work HELP! Read for complete problem.

  All my programs has changed to one. LNK file when I tried to use open with an old paint of the folder, what do I do to get my office and all running programs corectlly? P.S. I have a group policy that blocks almost everything so there needs to be a simple solution that doesn't invole running of any application.exe because all the easy fixes are blocked by my admin that involve changes to the computer. The best way to resolve this would be to do a system restore to the day before, he got past, but which is also blocked. Help!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  It will be useful.