Vista slow system and displaying the message "Windows has a problem.

Similar Questions

• SyncUp software displays the message "SyncUp has stopped working".

  SyncUp software displays the message "SyncUp has stopped working" what can I do to fix this? Thank you

  Hello

  1. what operating system are you using on your computer?

  2. What is the brand and model of your computer?

  3. it worked very well on your system before? If Yes, you did it all software or hardware change before the show?

  Method 1

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2

  Uninstall and reinstall the software SyncUp.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Note: Uninstalling the software will erase all the data associated with it. You must redo all favorite and set up anywhere after settings put it back.

  THIRD PARTY WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the following help link:

  http://en.community.Dell.com/support-forums/software-OS/f/3526/t/19391777.aspx

  It will be useful.

• When I try to copy files to a CD, I get message "Windows has a problem to copy this file to a CD." How to fix? I get the same message that I click on "Copy to CD" or drag the file to copy to the CD player.

  When I try to copy files to a CD, I get the message "Windows has encountered a problem when trying to copy this file."  I press the button "Retry" without any result.  I get the same message that I have click on 'Copy' files on a CD or drag the files to copy to the CD player.  I was able to copy these same files to a CD a few days ago.  Thanks for the suggestions.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  1. don't you get an error code along with this error message?
  2. what CD burning software is installed on your computer?
  3. what kind of CD do you use to burn?
  4. What is the status of the CD - DVD drive in Device Manager?

  Method 1.
  Let us first check the status of the optical drive in the Device Manager. Check if there is no error code or yellow mark is listed.
  Reference:
  Explanation of error codes generated by Device Manager in Windows XP Professional
  http://support.Microsoft.com/kb/310123

  Method 2.
  If the problem is to start the computer in a clean boot state and check if you are able to accomplish this task.
  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Strange reboots and the message "Windows has recovered from unexpected shutdown.

  My computer makes strange decisions. When I got off the computer for a long time and back I find message "Windows has recovered from unexpected shutdown" it happens only when I'm without my computer for an hour or more.

  My Windows Vista 64 operating system

  Hello

  Two ways to solve this problem, a point of view of sleep/hibernation and one of
  the overall performance. Even if the two methods in common, you may need to use both.

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658
  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.

• Update Windows XP SP3 is abandoned during the installation of UNIDRV. DLL and displays the message "the system cannot find the file specified."

  When the update of Windows XP is install SP3, the sequence is abandoned at the location of the process.  After you download the SP3, the progresses set install through the normal initialization sequence, inspection, creating list of 3rd drive part, backup files, etc., begins to install the files but when to reach the "UNIDRV. The installation of the file "DLL" stops and I get a message "the system cannot find the file specified".  The close message will invalidate all the installation and possible automatic restart.  I did not locate a UNIDRV. DLL file and copy it to my C:\ root directory but have tried almost everything in the 22/01/12 'terribrownQF' and the response "Tommy Stanley" 22/01/12 no change where the installation of SP3 crashes.  Should I try to put the UNIDRV. DLL file on my computer?  Any other ideas?

  Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years? [1]

  5. is Firefox, Chrome or any other alternative browser installed?

  6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner)?

  7 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?

  =====================================================================
  [1] note: support for WinXP SP2 ended the July 13, 2010! "Computers running WinXP SP2" will no longer receive software updates from Windows Update "[i.e., updated on and after August 2, 2010 so now that you're missing more than two years worth of updates to security critical! ] until SP3 has been installed.

• Windows Vista Service Pack 2 causes the message "Windows install will not be accessible".

  I am running Windows Vista with all the updates installed but Service Pack 2. I uninstalled Service Pack 2 because it was causing problems with the windows installation service. I was unable to install microsoft office update because the windows installer could not be accessed, and Adobe Acrobat Reader could not be repaired or updated for the same reason.

  With installed Service Pack 2, I traveled all troubleshooting for the windows service install. I have a click with the right button on my computer, manage, service and open the properties of windows install. I have activated the service, but still couldn't install the updates Microsoft office or Adobe Acrobat Reader update/repair. I also tried to configure windows install automatic rather than manual when the computer starts.

  I had the problem "Windows install is not be available" for nearly a year. After trying to do a repair Vista boot without result, I uninstalled all updates. The problem disappeared. I decided to install the updates one by one. After you have installed Service Pack 2, the problem with windows install returned. The Service Pack installs completely and then open my computer properties indicates that Vista runs with Service Pack 2 installed.

  Uninstall Service Pack 2 and blocking automatic updates will not install it was my only solution to the issue of "Windows install is not be accessible". I fear that it may cause a security flaw in my computer, however.

  If someone has encountered this problem, and if so, is there a solution to install Service Pack 2 for my windows service install still works correctly?

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves. Composition of such problems, Geek Squad is also infamous for having failed to download/run the Norton removal tool before installing another AV app or security suite! The 'leftovers' Norton may have caused your post-SP2 installation problem.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  5. restart & test (i.e. display SP2 & install it again). [2]

  TIP: Temporarily disable Sunbelt Vipre Antivirus before installing SP2. If you still encounter problems after installing SP2 again, open a free support by my previous response incident.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  [2] How to hide or show an update of Windows Vista

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get the message windows explore a problem causes the program to close and restartwhen I try to print from a web page.

  I went to a web page that displays the lyrics of the music. Tried to print as many times and a message will come out saying that a problem with the web page has cuased windows exlorer to close and restart the page. It does not print.

  Some tutorials for you to try:

  1 Internet Explorer does not start or stop responding
  http://support.Microsoft.com/kb/926449
  Note: It has an auto FixIt application. Use it.

  2. Internet Explorer Add - ons problem when IE hangs or freezes
  http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us
  Note: there also an Fix It self.

  3. to resolve network connectivity problems in Internet Explorer
  http://support.Microsoft.com/kb/936211

• Detect the browser and display the message, without PHP?

  My site is not fully functional with Google chrome, still many works in Firefox and almost nothing works with IE (for now), is there some kind of code/script that I can use to detect whether a browser is not Google chrome? And then if the browser is not Google chrome a message appears? I can't use anything PHP, Javascript or something else would be better.

  could someone just help out me with the display of a popup, but only for a browser that is not in a specific list?

  You have no idea how MANY different browser user agents and there are versions?  I don't think you do, or you wouldn't ask that question.   An exhaustive list could continue for pages and still not all cover.

  Let's say that for a moment your site looks OK (maybe not 100% perfect, but OK) in all modern browsers EXCEPT Internet Explorer 6, 7 and 8.  You could use a conditional comment to pre - IE9 target browsers and display a "warning message" then load your page.  Just paste this after thetag in code view.

  Purely for the reasoning, suppose that we are in the Bizzaro world (another dimension where everything works in opposites).  Your site works well in all versions of Internet Explorer, but has problems in all modern browsers.  You can use a conditional comment of exclusion like this:

  In summary, I do not recommend the use of browser detection scripts because they are not infallible. Object detection is much more reliable.  To learn more about the reasons, see this article from quirksmode.

  http://www.quirksmode.org/js/support.html

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Try using Microsoft Picture It! Publishing in Windows 7. When you try to start a new project or use the Save function under get the message "Windows has stopped working".

  Microsoft Picture It 2001 software installed in Windows 7.  Program will show a project that I recorded in Windows XP that I upgraded to Windows 7, but it wont let me save the project under a different name.  The program does not let me start a blank project.  I get the error message "Picture It! has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. "Windows did not close the program and did not warn me of a solution.

  Microsoft Picture IT is not officially compatible with Windows 7. Microsoft's picture IT was abandoned and has been replaced by Windows Live Photo Gallery. You can download Windows Live Photo Gallery for free and install it on Windows 7, but there only basic editing features.

  Windows Live Photo Gallery:
  http://www.windowslive.com/desktop/Photogallery

  Two editors of the most popular free photo with many features are related to the Sub - between the two programs Paint.NET will be easier to use.

  Paint.NET
  http://www.getpaint.NET

  GIMP
  http://www.GIMP.org/downloads

  You can also use the built-in photo editing Paint program. To open Paint, click the Start button, click programs, accessories principally made, and then click Paint.

• Most of my programs on desktop computer have been replaced by an icon in windows photo viewer and displays the message as below

  don't know what Ive done and can't open anything! has tried to get some pics of a USB key that does not work so started clicking on things now Ive armed the laptop everything upward, as I said when I try to go to the settings by default/Word, IE, firefox, basically everything! the following message appears "window Photo Viewer cannot open this picture as photo viewer does not support this file format or you do not have the latest photo viewer" I've google it work on my phone but all advice given prople click some options, it doesn't let me do this. Just before that happens I had clicked on "change the default settings for media or devices" in autoplay and had clicked on 'Reset all default settings' I don't know if that made it, but I can't do anything, any help would be great, I'm not very good with computers as you have probably guessed now! so could you explain how to fix this problem as simply as possible! Thank you

  Hello

  See if that helps you.

  'Restore. Association of exe in Windows 7/Vista after incorrectly associating it with another program"

  http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/

  "When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program.

  Run the Mr.Fixit here or you can use the manual method it y to correct yourself

  http://support.Microsoft.com/kb/950505/en-us

  And also, read information please.

  'Change the programs that Windows uses by default'

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  See you soon.

• After installing Windows 7 using MDT, Windows displays the message "Windows Update cannot currently check for updates because the service is not running.

  Hi all

  I worked on creating a better system for my business get an OS up-to-date with all the required software, settings, and drivers. I have previously using WDS as autonomous and just syspreping images and pushing them up until he became incoherent and corrupting of the parts of the image. I did a little surfing on the web and discovered that many computing professionals use MDT to produce images of quality with all the customization they need. So that's the problem.

  The image works fine. I'm able to customize the way in which I need to and get most of my successful deployed pilots (problem with trackpad drivers), but the error message I get when I try to run a windows update is "windows that update cannot currently check for updates because the service is not running." After I received this message I check my services and it shows the update of Windows running service and long-term as well running services. Tried to restart as suggested and still no results. Undertook research for a possible fix and still nothing.

  Any help?

  It became quite a headache for me. Thank you guys

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the installation of Windows Update.

  If you your computer are connected to a domain network?

  If Yes, then post your query in TechNet forums because they have more expertise in this issue to help you better. Please follow the below link to do the same.

  T echNet Forums for Windows 7 
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• Often, I get the message: Windows has experienced a problem and must close.

  I also get messages from 'too weak to minimum the virual memory'.

  Hello

  Please, take a look at this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/virtual-memory-minimum-too-low-message/12297ad1-d9cf-4e64-a7d2-6d76df7b2a80

  I hope that helps!

• Firefox does not load and displays the message missing or inaccessible profile.

  An update of Firefox was interrupted before completion before that

  https://support.Mozilla.org/en-us/KB/Profile-Manager-create-and-remove-Firefox-profiles

  https://support.Mozilla.org/en-us/KB/how-run-Firefox-when-profile-missing-inaccessible

• Carpet * a UJ-8315: error message - windows has detected a problem

  I am trying to copy a movie on a dvd/cd and the windows still display the message: windows found a problem... what could be wrong?

  Hello Leandro,

  Please could you give more details of how you are trying to copy the movie. If the original is on a DVD, so there may be copyright protected that prevents you to copy. If it's a movie you did yourself with a video camera, then there may be a problem with the format that you use when you try to burn on a DVD/CD.

  Kind regards

• When copying pictures on a CD, the error message "Windows has encountered a problem trying to copy this file.

  Try to copy photos on CD. I get the message "Windows has encountered a problem trying to copy this file", it comes on for each photo in the file until they are all updated. This method used to work well. Answers would be appreciated.

  You are in your folder my pictures?

  What happens if you do the following...

  Select (highlight) a group of miniature photos...

  Right-click the group selected...

  In the menu choose... Send to / DVD - RW drive...

  Transfer Photos to a CD - how to burn Images
  http://www.brighthub.com/multimedia/photography/articles/5126.aspx

  ===

  FWIW... the following freeware can be worth a try:

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (works on XP / Vista / 7)

  Download CDBurnerXP
  http://CDBurnerXP.se/download.php

  CDBurnerXP - create data disc
  http://CDBurnerXP.se/help/data/compiledata