Vista SP2 wants me to install KB947821, but it is already installed

Similar Questions

• Update of Vista SP2 MBR has not installed? 0 x 80004002

  This has been asked before, but the link given a Microsoft Support technician has been no help and not even related to this problem.

  When I run the normal Zune 4.7 installer it says that it cannot connect to Microsoft Update. I received the package from microsoft and who was running and I get the error "the installer must stop because the perl 'Vista SP2 Update MBR' package has not been installed.
  «Error code: 0 x 80004002»
  I tried to install this for a week now.
  (I tried to uninstall SP2 and re - install, which installed successfully and I still get this message... help?)
  Edit: I tried uncompressing the installer and run the .msi file in the package folder. It starts the installation and the load completely bar then go back and cancel all. During "installation" error boxes pop up.
  ' FirewallCA 21:34:09.700: 'PreserveWirelessFwRuleConfig' operation has completed with the outcome 0x80070005. »
  ' NssCA 21:35:11.055: 'UnregisterUrlNamespace' operation ended with the result 0 x 80070002. »
  ' DriverCA 21:36:27.806: 'InstallHardwareDriver' operation ended with the result 0 x 80070057. »
  The "Zune" shortcut that had appeared on my desktop disappears.
  A Zune file appeared in my Program Files folder, but the only files in there are Zunewmdu.dll Zune WmduResources.dll and a folder called 'en-US' with ZuneWmduResources.dll.mui inside.
  Running Vista Home Basic 32-bit

  You must register a dll file

  1 goto Start > Run
  2. Type "CMD" and press enter
  3. in the command window type "regsvr32 c:\windows\system32\wuaueng.dll" and hit enter
  4 run the Zune install again

• Windows Vista sp2 and Installer cannot install updates error 80070641 code

  original title; Windows Vista sp2 installer problem

  Hello.  I'm running vista 64 bit sp2 and I seem to have a registry error with windows install.  Whenever I try to install/uninstall a program, I get the error message

  "The application failed to start because msi.dll not found. Reinstalling the application may fix this problem. »
  Maybe related, but when I try to run any windows program (examples are programs office, expressions) I get the error message
  "the specified module is not found.
  Also, I can't do windows updates.  For the latter, I get:
  error code 80070641
  Any help is greatly appreciated.  Unfortunately I do not have the original installation disks for vista, or all the backup files.

  Hi Maxjh25,

  It seems to be that some of the files windows install is corrupt.

  I have some steps that may help you:

  Method 1: Make sure that the Windows Installer service is running.

  a. click Startand type services.msc , and then press enter.

  (b) in the services window, locate Windows Installer service in the services list.

  c. check that the status is started. If the condition column is empty, right-click Windows Installer, and then select start.

  d. If you get error trying to force start the Windows Installer service, try to change the Startup Type to Automatic (default is Manual), then

  e. restart the computer.

  f. If all goes although you should, after the analysis, see the following message "theWindows resource protection did not find any breach of integrity".

  g. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

   

  Method 2:

  a. try to uninstall Windows install using the Windows Installer Cleanup utility:

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/kb/290301

  b. restart the computer.

  c. download and install the latest version of Windows Installer by downloading from the link given below:

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  d. try to install the program.

  Hope the helps of information. Please post back and we do know.

• Arrears of vista SP2 update daily to install

  Every day I get a notification to install SP2 for vista, I accept it, I get a note that the installation was successful, but the notification is displayed again the next day. (SP1 is already installed)

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.

  2. in the left pane, click view update history.

  3. find the update for Windows that has failed to install, and then double-click the update to view more information.

  Updates that have failed to install will display failed under status, next to the name of update.

  4. in the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  5. click on the links in the dialog box Windows Update under more information or help and Support to try to solve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

• Vista SP2 64 have not installed, returning from changes

  Hey pa, I tried all the steps 1 to 6, with 6 in aggressive mode and still no luck.  I'll try some more tomorrow.  Thanks again for you time.

  Im still working this vista 64 sp2 and I'm running out of options.  I tried almost every fix I found and not joy.  I do not play with the registry manually, but there were a few difficulties that I saw that I think I'll have to try.  If anyone has a different suggestions, links, wisdom, please share, thanks.

• Vista SP2 not success to install

  In the middle of a specified when installing SP2, and then in the dialog box said no success and detail is Error:ERROR_INVALID_DATA (0x8007000d)

  and I follow the sulotion to help support until the solution 4 uninstall anti-virus program. its can not succeed.

  What should I do, please help and suggestion

  Thank you

  Bill

  Hi Beepal,

  Please follow the steps below to install SP2 successfully on your computer:

  http://support.Microsoft.com/kb/947366

  Answer about the State of the question.

  Thank you

  Marnie.

• a valid premium vista license want to run xp instead, but obstruct by activation in India

  trying to help a young person to the Organization of personnel are used to xp were given a tower of vista premium which has been cleared by the previous owner

  We only have a xp disc and charged thanx

  You can install a retail version of Windows XP, not an oem version that came with a previous PC.

  Neither the is Windows XP install/execute if this PC manufacturer does not include Windows XP drivers for this model.

  What does "obstruction" by support mean exactly?

  Vista key cannot be used to activate winxp

• Using Windows Vista SP2 (32 bit), failed to install IIS

  Using Windows Vista SP2 (32 bit), cannot install IIS.  Tried several of the resolutions found on the web to turn (uninstall .net 3.0) to uninstall WAS.  Still nothing works.  Look at the event log, it appears that the TrustedInstaller.exe is in a loop that indicates that Windows Servicing began a process of change state KBxxxxx package installed to installed.  I have this day to the next release and we found thousands of entries repeated over and over as it in the event Log.

  I would say the TrustedInstaller.exe has been hacked or corrupted, but daily MS patches are applied without error.   I also ran the SFC/scannow command without success.  I tried to restart, don't turn off unnecessary services, execution of installation in Mode safe... go!
  I'm surprised there isn't a utility which will ensure the components that need to exist in the version required for IIS, well... does not exist!
  Any ideas?  I need to get the IIS services are installed for the development of a website of ASP.NET ASAP!

  Using Windows Vista SP2 (32 bit), cannot install IIS.  Tried several of the resolutions found on the web to turn (uninstall .net 3.0) to uninstall WAS.  Still nothing works.  Look at the event log, it appears that the TrustedInstaller.exe is in a loop that indicates that Windows Servicing began a process of change state KBxxxxx package installed to installed.  I have this day to the next release and we found thousands of entries repeated over and over as it in the event Log.

  I would say the TrustedInstaller.exe has been hacked or corrupted, but daily MS patches are applied without error.   I also ran the SFC/scannow command without success.  I tried to restart, don't turn off unnecessary services, execution of installation in Mode safe... go!

  I'm surprised there isn't a utility which will ensure the components that need to exist in the version required for IIS, well... does not exist!

  Any ideas?  I need to get the IIS services are installed for the development of a website of ASP.NET ASAP!

  I have only a limited understanding of IIS and ASP.net.

  1. What are they? IIS 5, 6, 7.0?
  2. make sure that your version of Vista can support.
  Go to programs and features > column to the left, turn Windows has on or off > scrolling Internet Information Service > expand (+) sign and make sure if its level of compatibility under Web management tools. Home Premium can go as far as IIS6. > Make sure check marks are on the elements you need to install IIS.

  3. from what I understand, the version of Vista Ultimate and superior is required to install IIS 7.

  This is as far as I know.

  To install IIS 7, here is a tutorial:
  http://learn.IIS.NET/page.aspx/28/installing-IIS-7-on-Windows-Vista-and-Windows-7/

  Your question needed IT expertise. I suggest that transfer you to one of these support ASP.NET forums.
  Here's one of them: http://forums.asp.net/

• I can not install the KB2530548 update on laptop with Vista SP2

  I use a laptop with Vista SP2 - cannot update and install the following KB253 548 and switch of IE8 to IE9

  Hi DericKemp,

  1. what happens when you try to install the update?

  2. you receive messages or error codes?

  You can check which version of Internet Explorer is installed on your computer.

  Find out what version of Internet Explorer you are using

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  Step 2:

  You can also check out the following link and try to install the stand-alone update package.

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2530548)

  Hope this information is useful.

• Skype 7.8.73.102 bug on Windows Vista SP2

  Hello world

  My OS is Windows Vista SP2.

  Each Windows Vista SP2 updates had been installed.

  I met again the same bug in Skype.

  I used to install Skype offline, and then start the first time Skype has failed

  as the attached picture.

  After you restart, Skype still doesn't work even if online.

  How could I solve the problem?

  Thank you very much.

  Best regards

  Steven.

  

  I updated to Skype to 7.10.73.101, and then, the question did not appear.

• Error code of Vista SP2 0xC004F055

  Original title: Vista S | P2

  Vista sp2 said "could not install, undoing changes".  On reboot I get 0xC004F055 error code "the software licensing service reported that the Basic Reference is not available.  Then a notice of activation of Windows. No boot safe mode, no normal start-up. Just a dead laptop Dell...

  waddaf?

  See http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/windows-activation-error/70c1fc27-971c-402b-b121-479f3bf0bc9b

  and http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/updating-vista-ultimate-with-service-pack-ii/0ad784b7-430c-44f5-8218-06a61d38971b

• Vista SP2 installed, but Keep Me saying to reinstall

  OK, so I recently formatted my computer laptop and for the last month, now this dang thing was to tell me to install SP2 so I do and it installs successfully, and I check the update of windows and he said: it has been installed and I am currently at day, then 3 minutes later, he tells me that I need to install it again. I do not understand it asks me to restart my computer or whatever it is, I did it myself several times, but it doesn't seem to do anything. I tried everything and I don't know what to do... and I don't want to do a reformat. Can you please help?

  I have a laptop Toshiba Satellite L45, Intel Dual-Core T2080 @ 1.73Ghz 1 GB Ram hard drive 80 GB 32-bit operating system

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• I am running windows vista without service pack, 32-bit. I can't install the update. I got the error code WindowsUpdate_8007371C. I want to finally install sp1 but I got the same error.

  I am running windows vista without service pack, 32-bit. I can't install the update. I got the error code WindowsUpdate_8007371C. I want to finally install sp1 but I got the same error.

  popihavaki,

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/aeb7abd4-73c6-403b-9c43-bce64193a1af/>

  05/05 / 1101:03: 23 am

• Cannot install Vista SP2 (or any other update) even after the KB947821 application

  I tried for months getting my wife's cell phone to install SP2 and other updates of security, but they keep failing.  Microsoft's response is to use the analysis tool... but it does not work.

  Unlike some others, the tool reports having installed successfully (KB947821v12) but I then try to install SP2 (or other updates from windows update) and I get an error message.

  The system is a Dell inspiron 1525 Dual core * address email is removed from the privacy * and 3 GB RAM under Vista Home Premium, SP1 (32-bit).  System Norton antivirus installed, licensed and fully updated. I've removed almost any other piece of software besides the pilots, office 2007, and Norton, run a registry cleaning tool, defragmented the drive hard, etc.  Still getting the same error.

  Try to install SP2 (KB948465) starting from the .exe downloaded from microsoft (have tried so many times, I couldn't wait to download each time!), gives me the message "Installtion failed", details show the 0x800f081f error code

  Through windows update, I have the following four updates available, I have several times to install these and get the error code 8007371B for all:

  • KB2508272 (Cumulative security update)
  • IE8 - 8007371B (also tried to install IE8 by uploading it directly on the site of ms, as opposed to windows update)
  • KB2079403 (security update)
  • KB956250 (.net 3.5 Sp1 update)
  • KB68930 (Windows PowerShell 2.0)

  Come to be able to install KB890830 today (27/04/2011), but even after installing that others do not work!

  8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
  One or more required members of the transaction are not present.

  'Something' interferes with operations in Windows\winsxs. This 'thing' is Norton or malware. Have you checked one of the logs generated by the update system (or CheckSUR) tool when he was executed?
  They are located in and named it.

  Windows\Logs\CBS\CheckSUR.log
  Windows\Logs\CBS\CheckSUR.persist.log

  It looks like you will need to either Configure the system to boot or uninstall Norton, then run is the removal tool, in order to resolve the error, 8007371 B, elrao.

  At the moment, it may be too late to solve the inconsistencies that are produce in winsxs. Your other options are-

  (1) contact Microsoft for assistance in obtaining the security updates installed (KB2508272 or KB2079403). However, KB2078403 was published last summer, and should be installed now. This isn't a good sign.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Cannot install Vista SP2; 'upgrade' disabled when I try and re - install by KB958044

  Hello

  After three days of struggle with trying to get Vista Ultimate (purhcased at the United States) SP2 update, and several failures of various updates automatically downloaded from Windows Update: I finally found and read

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/09c291bf-3868-4DFA-8004-139ec8018aa1

  MS response has been a link to: http://support.microsoft.com/kb/958044

  But when I try to follow the instructions in KB958044: 'upgrade' is disabled.

  I don't really wish to throw three days work of re - install my programs, tweak the settings, etc.

  Thank you, Bill Woodruff Bill Woodruff

  Hi Bill Woodruff.

  Because the standalone SP2 package failed with the error: '0 x 80070490', you can try to run Checksur (KB947821) to address corruption in the manifest of component maintenance (EC) and try to install SP2 Standalone Package.

  To run Checksur (KB947821) follow the mentioned below as follows:

  (1) download and run the system update by the following article preparation tool: KB947821. Description of the system update tool for Windows Vista and Windows Server 2008: http://support.microsoft.com/kb/947821

  (2) put the computer in Cleanboot before installing the stand-alone Package of SP2:

  To perform the cleanboot, refer to:

  Click Start, type msconfig in the search box and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on continue. On the general tab, click Selective startup, Selective Startup.Under, clear the check box load startup items. Click the Services tab, select the hide all Microsoft Services check box, and then click Disable all. Click OK.

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use: http://support.microsoft.com/kb/939671

  (3) try to install the stand-alone Package for Windows Vista SP2.

  (4) after Installation of SP2, put the computer in Normal mode:

  Click Start and type msconfig in the box start the search. On the general tab, select "NORMAL STARTUP". Click on apply, then OK. When you are prompted, click on restart.

  However if SP2 fails to install again, then you can have make a repair or Installation upgrade Inplace of Vista to install SP2 as mentioned in article KB958044 after uninstalling SP1.

  During the Upgrade Installation process, you will get the options go online to get the latest updates for installation and do not receive updates for installation. If you choose the option to go online to get updates, then it tries to download updates for the installation process, the windows updates required for Installation, including driver updates and it won't include all the latest Service Packs for Windows Vista.

  If you get an error "upgrade is disabled" when you try the Inplace upgrade, it may be due to a version of Windows Vista with Service Pack 1 installed, you can not upgrade by using media that does not Service Pack 1. If you have a drive without SP1 and SP1 is installed on the computer as an update, you need to maybe uninstall SP1 first and then start the Installation of upgrade or you can arrange a full disc with SP1 to make Installation of upgrade by using the product key came with your upgrade disc.

  For more information, please visit the link: http://support.microsoft.com/kb/951247

  If you try to uninstall SP1 to upgrade Installation, you can follow the mentioned below as follows:

  1) click Start, type Appwiz.cpl in the Start Search box, and then click Appwiz.cpl in the list programs.
  (2) If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3) click View installed updates. Click service (KB936330) package you want to uninstall, and then click on uninstall.

  For more information, please visit the link: http://support.microsoft.com/kb/948537

  Hope this information is useful.

  Let me know if it worked.

  With regard to:

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.