Vista - "updates were not properly configured"

Similar Questions

• Failed to install KB2898785. Error, "updates were not correctly configured. Returning from the changes.

  32-bit o/s. Vista Home Premium. All scans/checks indicate no problems

  "Updates were not correctly configured. Restoration of the changes. ....." Advice please?

  M/S Rep told me that the (free) support for Vista is no longer available. Could the problem of security identified in the software of M/S already affected my system (published 12/10/2013 refers)?

  Hello

  I wish that refer you to this article-

  https://support.Microsoft.com/kb/949358/en-us

  Note: Make sure that you get the computer back to the Normal start once you have completed the troubleshooting steps.

  Make sure that you back up the data on the computer before you continue.

  Thank you.

• Watch "updates were not correctly configured. Revertingchanges. Do not turn off your computer.

  When I turn on my laptop this message "updates were not correctly configured.  Restoration of the changes.  Don not turn off computer. "Have not been able to go beyond that?  Any help will be appreciated.

  Hello

   
  You have security software installed on the computer?
  
  I suggest you to try the steps in the following Microsoft article and check if this may help.
  
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/949358
   
  Hope the information is useful.

• "Updates were not correctly configured. Returning from the changes. »

  3 days in a row, installs the updates in the usual way, and then uninstalls them - it's a frustrating and major time waste trying to connect.  Nothing in Microsoft 'help' allows it.

  I checked the list, and the problem seems to be update for Microsoft Security Essentials - KB2866337 (4.3.219.0)

  Manually update the MSE: http://www.microsoft.com/security/portal/definitions/adl.aspx

• Do not properly configure updates

  Updates download and install successfully.  But then I get the "Configuring updates" screen and it says that the updates were not properly set up.  The computer says then it's the return of the changes and then I don't have updates!  Someone at - it a solution?

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Not able to install updates to get the message: 'updates were not able to configure correctly, returning from changes'...

  Original title: I have Vista with Service Pack 2, but were unable to come down and configure updates since 07/12/11. Need help, thank you.

  Do not get the error codes. Just when I reboot, I get the message "updates were not able to configure correctly, returning from the changes".

  Hello

   
  You are able to start in safe mode, then you can perform the clean boot in safe mode and then try to boot into normal mode.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  If you are able to boot to the desktop after you perform a clean boot Windows check updates history of inforamtion on the updates failed.
  Reference:
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
   
   
   

• Error code: 800 b 0100 (some updates were not installed)

  I GET THIS MESSAGE WHEN I TRIED TO INSTALL AN UPDATE "SOME UPDATES WERE NOT INSTALLED". INCLUDES THE MESSAGE "CODE 800 B 0100 WINDOWS UPDATE ENCOUNTER AN UNKNOW ERROR".

  HOW CA IT BE CORRECTED

  If you receive error 800b0100 in Windows Update, it means that a file needed by Windows Update is corrupted or missing.

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-800B0100

• security update were not installed security update for Windows XP (KB956572) (update 1 of 1)...

  security update were not installed security update for Windows XP (KB956572) (update 1 of 1)... The amendments failure disappeared many times
  kindly help to solve

  Hi DEVOO,.

  Follow the steps listed in the link below: how to troubleshoot Windows Update, Microsoft Update and Windows Server Update Services installation issues: http://support.microsoft.com/kb/906602/

  Then install the standalone update package. You can download the stand-alone version of the link below: http://www.microsoft.com/downloads/details.aspx?familyid=73d2324f-be59-4b0c-b1ac-9876a13c2c03&displaylang=en and check if the problem is resolved.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install windows update, error: updates have not been configured correctly. The system then returns

  Original title: Windows updates fail to configure.

  I wonder to install Windows updates. I do and I am told they have installed.  When I have to restart my computer, I get a message that the updates have not been configured correctly. The system then returns. Next time I turn on the computer I get a message saying that updates have not been successful.  This has happened for months. I think that my computer is very slow because of it. I also think that my computer is a little short on memory. It is an Inspiron 530 with 1 GB memory

  Hello

  I suggest you try the steps from the link below and check if it helps.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates: http://support.microsoft.com/kb/949358

  I hope this information is useful.

• WinHlp32.exe KB917607 error: the following updates were not installed.

  Original title:

  WinHlp32.exe for Windows 7

  I have Windows 7, 64 Bit and downloaded the WinHlp32.exe - Windows6 version. 1-KB917607-x 64.msu. During the initialization of the installation, all right. When he moved, he said "the following updates were not installed. Update for Windows (KB917607). "All I can do at this point is to close the program, and my problem is not fixed.

  Run Microsoft Fixit leave of the following and then try to install the update:

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  http://Support2.Microsoft.com/mats/malware_prevention/

• Problem with the Modem devices: Modem already used or not properly configured

  I use windows 8. Until last night, my laptop was working fine, but now it rejects all the modem devices, I try to plug it. I tried to connect to internet via Auntie photon and reliance netconnect +, but this message "Modem already in use or not properly configured" keeps on appearing two modem devices? Is there a problem with my OS or my laptop? Help, please

  Thanks for the solution.
  Well, my problem was similar but different too. The method to uninstall the modem device is correct. I tried, but still it did not work.
  My problem was that I have 3 different modems installed on my pc, but I used one of them. So I would uninstall only one I used. It turns out that we have to uninstall all modems. Its pretty simple, but its not so obvious. I thought about it later in like 2 days. I hope that people reading this don't have to wait 2 days to fix this problem.

• PHP is not properly configured on your web server.

  Hello, I download a site Web of muse and me always error at the end - "1 WARNING.
  PHP is not properly configured on your web server. Forms of the muse does not work correctly unless PHP is enabled on the web server. Contact your Web host or Web site administrator on how to enable PHP support. "
  
  already on the site online form that do not send the email from the same mistake.
  
  How can I solve my problem?
  
  Thank you

  
  

  Margarida Amara

  Hello Margarida,

  Your Web host must support PHP and the PHP mail service must be properly configured to send e-mail messages. If you use the feature to download FTP in the Muse, Muse will attempt to warn you if it detects that your Web host does not meet these requirements.

  I suggest you contact your hosting provider in order to get this resolved.

  Thank you

  Ankush;

• MESSAGE - LOOK AT AN ENVIRONMENT MAY NOT PROPERLY CONFIGURED TO USE ADOBE READER.  HAVE ACROBAT READER AND USED, MESSAGE RIGHT ON THIS ONE SITE. HOW DO I FIX

  HOW CAN I FIX IT?

  Hi tomp3648858,

  Please refer to this topic If look at an environment is not properly configured to use adobe what should I do?, I would like to know if it's the same scenario.

  Kind regards

  Nicos

• PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctl

  PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP.

  Hi Graham,

  If you, please add your site to this link ( http://my-site.com/scripts/form_check.php ) and make sure that all green checkmarks are appearing. If they don't, let us know what errors you seem to receive and include the link to your site.

  In addition, check out this guide on the forums of Muse troubleshooting: Troubleshooting Muse form used on the servers of third party Widgets

  I hope this helps!

  Emily

• "Windows updates were not be properly configured and restoration of changes." The computer freeze

  I have a laptop Dell inspiron 1501 with windows vista on it.

  I don't have the disc of windows Vista DVD you are referring to, I have never recived a Dell I bought the computer on the internet with vista already installed.

  My problem is that, with respect to the windows updates, I get a message saying "Windows have been developed to date not be properly configured and restoration of changes". I have 51 updates pending, 47 of these updates is equivalent to 170 MB.

  As a result of these updates, I think it's the cause of my freezing computer once I have connected and I have to restart only having do not 2 - 3 times.

  When the computer "freezes" the cursor does not move throughout the scene, none of the keys works, including Manager tasks etc., the only thing that works is to turn the computer off. Sometimes, there is a beep, beep once the computer crashes.

  Over 95% the updates I have try have 'no '.

  I'm lost as how to how to repair?

  All good suggestions welcome to solve this problem, the simpler the better... I don't want to have to buy a new computer... If I won't Dell... and I'll have to get the windows disc... most solutions here seem to require it...

  Hi AL0001,

  Run the chkdsk command to check that there are no problems with your hard drive. To run the disk check, follow these steps:

  1. Restart your computer and immediately press the F8 key until you reach the menu Advanced Boot Options.
  2. Select Mode safe mode with command prompt.
  3. At the command prompt, type chkdsk/r (there is a space between the k and /)

  Meanwhile, check the Dell website to see how you can get a recovery disk in case you need to recover Windows.