Windows vista will not start and is suspended on microsoft today updated. Stops on step 3 update

Similar Questions

• Windows Vista will not start and cannot recover

  I have a desktop PC HP Compaq Presario, which has about 2 years. The problem started when Windows Vista was not able to start. It would load up on the "COMPAQ" screen and then it would just go to a slider black white screen with a flashing white light on the top left. Now that I've seen a lot of discussions with this similar problem, but it seems that people would rather not reformat in order to lose any important data. But in my situation, I have some important data on my computer so reformatting would be fine, except...

  -Recovery system won't work. I insert the 1 system recovery disk, all files loading correctly, it allows me to choose if I want to reset the computer to factory settings, I click Yes and it finishes the reformatting step. But then the problem comes when I insert disc 2, original content relocation step. It fills up to 10-16% and then I get a blue screen of death STOP: 0 x 00008086. I tried SEVERAL times and the same thing happens.

  -The next thing I tried to do is to fix the computer via a copy burned Windows Startup Repair. Loads everything up, I spent the page where I choose my language, currency, etc. The problem comes when I get to the System Recovery Options. There is no listed BONES and a box appears and says "Searching for Windows installations", and then it stalls just on this pop up. This problem is quite recent, because before there is no pop up and there is simply no OS listed, so I still could not repair or restore in any case.

  -Before, when I was able to go into the advanced options on the Startup Repair disk (when he was not of "searching for Windows installations" pop up to stall on), I'd go to the command prompt in attempt to chkdsk/r C:. All bad sectors or groups or something else would be fixed, and then he would hold to step 5 of 5 when checking free space.

  -In addition, I tried to make a diagnosis of memory via the Startup Repair tool. That's what I get:

  File: \boot\memtest.exe

  Status: 0xc000000f

  Info: The selected entry could not be loaded because the application is missing or corrupt

  
  

  Furthermore, I cleaned my computer, it is now almost completely free of dust. In addition, I can't get into the BIOS, I can't get into safe mode, and now I can't have in the command line

  Hello

  If you are unable to enter the BIOS and all the other problems, you have hardware problems
  and need the help of a real store of the computer (no leeks and glances at a Best Buy or any other
  Department stores) or Support of HP/Compaq.

  Compaq Presario Support
  http://www.Compaq.com/country/cpq_support.html

  Forums for HP/Compaq
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Vista will not start or repair.

  Greetings!

  I'm having a problem with my computer. About 2 weeks, my Windows Vista out of nowhere began to fail in the market with the infamous and hated "cannot start Windows, a recent hardware or software may have... "and the options of start that none who work. I tried to fix it several times, but Windows would only start for an hour or two, and then the screen would go black. When I tried to start up, he would go back to the Windows cannot start message. I then completely reinstall windows, but every time I try the black screen comes back and the windows do not message starts again. I then tried to boot from an Ubuntu disc and install it, in vain the same black screen and message windows after that reload will appear. Now, the computer will only start with the windows form has failed every other power-up, otherwise the black screen appears. I looked inside my computer and everything is plugged tight, and I just checked my drive for errors of law before the failure, so I don't know what could be the cause of this.

  Help, please!

  Thank you very much!

  Brandon

  Hi noblesb,

  First disconnect the external devices connected to the computer except the mouse and keyboard.

  I suggest that you try the startup repair using the windows vista installation disc.

  1. Insert the installation disc.
  2. restart your computer.
  3. click on the Start button, click the arrow next to the lock button, and then click restart.
  4. If you are prompted, press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  5. choose your language settings, and then click Next.
  6. click on repair your computer.
  7. Select the operating system you want to repair, and then click Next.
  8. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If the previous step fails then check if the computer is able to boot into the advanced boot options.

  Steps to start in safe mode

  1 restart your computer if it is running.
  2. tap on the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Boot Options, you can stop tapping.
  4. use the up/down arrows to select your selection.
  5. Select Safe Mode and press enter.
  6. you should see loading drivers and wait please.
  7. you should then be on the Welcome screen.
  8. connect to your computer using an account with administrator privileges.

  If you are unable to boot into safe mode, then try any other fashion among early startup options, check out the link for more information below.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Free games included with Windows Vista will not start.

  I tried to start one of the games for free in Windows Vista (Chess Titans, FreeCell, hearts, Mahjong Titans, Solitaire etc.) but I get an error measage: "this file has no program associated with it for performing this action.  Create an association in the Set Associaction Control Panel". {Error code: C:\User\Name\AppData\Local\Microsoft\Windows\GamesExplorer\{00D8862B-6453-4957-A...}.
  These games, used to work until I have connected on the Microsoft web site and search for updates.

  I went to control panel default programs - programs - '-' associate a file or protocol type with a program, without success.

  Can anyone help or give advice as to re-download these games?

  Hi PaulO246,

  Thank you for directing your question on the forums of answers.microsoft.com.

  Is it only the games that are carried out at this stage, PaulO246?  Are there other programs or files that are not associated with?  Have you seen errors referring to a failed installation of the update or mistakes that can be reported on this subject?

  To review the event viewer to obtain this information, please see the following article.

  http://windowshelp.Microsoft.com/Windows/en-us/help/a99f69c1-935f-4116-ba5f-33d8800ef9da1033.mspx

  If you would like to connect the error codes, such as 800b0100 or 8007371 b Please post these errors as well as any verbiage on the observer error events lists in newspapers of the forum.

  We will try to verify this information when it is available.

  If you don't want to take that step right now:

  A way to solve this, if you have a good restore point, you can go back to it and then starts with the download updates manually one by one with control over games between each install to confirm that update was the cause.

  To perform a restore system;

  Please make sure that you have all the important information saved before trying to do a system restore.
  1. click on start
  2. in the search box just above start System Restore type (you don't have to hit enter to get this to appear)
  3. in the list above system restore search box must be the top of the page, click on system restore
  4. This should appear an assistant of system restore, it will walk through the steps on how to do a system restore to the last known better.

  Please let us know in the forum about how the status of this issue or any other necessary assistance.

  Kind regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• Vista will not start and the recovery disc does not

  Hey all,.

  Vista has just started to freeze during the boot at crcdisk.sys today

  I tried using the recovery disk, but it won't work, says the root prolem is corrupt system or something like that.

  If you need more information please ask!

  Can someone help me?

  Thanks in advance!

  Hello

  Yes, it would make a difference to what is the Startup Repair tool. Vista startup repair only works on his own Bootstrapper. You replaced one with GRUB, so you should use the ' nix tools to fix it. However, you indicated earlier that the problem occurs after the start load Vista, so this isn't something the Startup Repair tool will correct and is not likely to solve your problem.

  Your running recovery disk will also likely be wipe the GRUB bootloader, but you don't really have a lot of options when it comes to a corrupted installation. If you are unable to correct the problem to running chkdsk, then it is unlikely that any other action will work. You're stuck with the relocation.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Windows vista will not start or start in any mode

  My windows vista 32 bit operating system does not start. I tried it in all security modes and last configuration. I also tried to start with an installation disk, but the disk does not start for me to fix it. It is said that windows could not start because of a hardware error and suggested that I leave my installation disc, but nothing happens. It just keeps going back to safe mode options. How can I fix start upward.

  Wat is the specific model of the system?

  Yes, many of the items in the list may not be part of your specific system - but if your system has wireless has bluetooth or has a smart card reader, etc. - it's order.  It has a chipset motherboard, audio, video, etc..  You just skip installation of items that you do not have by following the list.

• Windows Vista, will not let me install the software! follow-up of the steps and nothing

  I tried to solve this problem for some time now with no results, I searched online and nothing. all the programs I try to install start and acts like it will install but never finished or shows me the error message. I turned to (UAC) and nothing. tried right click and run as administrator nothing.  just finished installation fix the beta program and once again no result. even allow me to install the updates as vista service pack 1 or 2 and yes I do ensure that the programs are vista compatible. the knowledgeable answers would be apreciated thx in advance.

  This error message you get?
  The problem just started recently?

  You can try a system restore to what installs worked: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore

  In addition, try the difficulty here: http://support.microsoft.com/mats/Program_Install_and_Uninstall

• Windows Vista will not start up - keep getting the black screen

  I read through the questions answered similar questions and still can not past the black screen with windows vista.  It's on a dell inspiron 1525.  Also, it does not start in safe mode and I tried booting from the last good configuration and is still stuck on the black screen.  This just started a few days ago, and the computer was working fine until this date.  Can you help me?

  Hi Jimazona,
   
  1. from when are you facing this problem?
  2. any change in software or new hardware on your computer?
    
  Method 1:
    
  First of all I suggest you to disconnect all devices external one except keyboard and mouse and try to start your computer and check.
       
  Method 2:
      
  I also suggest you perform a startup repair and check if this solves the problem.
     
  Follow the steps below:
     
  a. Please insert the Windows Vista DVD and restart the computer.
  b. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.
  c. Select your language settings, and then click Next.
  d. click on repair your computer.
  e. Select the operating system you want to repair, and then click Next.
  f. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.
   
  Access the link below for more information on the Startup Repair:
  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
   
  See also:
   
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/24b44a01-872e-4d87-867f-ed01a3579031/   
   
  I would like hearing that the results back on your part about what happened after trying each method.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think. 
  

• Windows Vista will not start after the automatic installation of the patch Ms.

  My Dell laptop does an automatic installation of the latest MS patches (12/08/10) and now he can't boot into windows.  All tests show that the material is fine, but an error at the end of the "bad update patch" said test results I can not even to go back to a previous restore point.  This happened to me the year last on my desk... same thing, but it's XP which could not start after an automatic update for the Member States.  Dell technical support told me that MS knows what is happening, but it is not supposed to be public knowledge.  I need to know if there is a fix, in addition to erase everything and do a complete reinstallation of the operating system.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista could not start and wants me to run the Startup Repair tool BUT

  It does not work... it takes forever and then asks me to load the drivers... where are they located? I can't find them on my Vista disk or my drivers disk... using a Dell Studio 17...

  When he goes into repair mode it gives a big arrow after about three or four minutes... then in another five he asks for keyboard language, then select the driver...

  where should I go from here? I know that this has already been answered, but I can't seeem to get there

  Here is an article from Dell on how to do a manual reinstall of the operating system (but note this is a clean install and not a system/upgrad repair install so it will wipe clean all the process data): http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?docid=339949.

  If you have an Installation of Vista genuine disc, you may be able to do an installation of repair/upgrade of the system (which would be better than the above option).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version of the system came with SP1 or SP2 preinstalled and the disc is an earlier version, then you will need to make a record of slipstream as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.  If you have problems to install the drivers, read the article above by Dell on how to obtain and install the drivers - it should apply in this case as well.

  If your system is still under warranty, contact the Support technique Dell and they probably have you will help with your problem over the phone free.  If she is no longer under warranty, there are still a few options of support at their Support Center who may be able to help. http://support.dell.com/support/index.aspx?c=us&cs=19&l=en&s=dhs& ~ ck = mn or http://support.dell.com/support/topics/global.aspx/support/dellcare/en/contact_technical_support?c=us&cs=19&l=en&s=dhs.  \

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• computer Windows vista will not start! What should I do?

  How to start the computer? I ran the test, then he said to start and he used! Help, please... Thank you

  Hello

  happy to help

  and seeing as you say it is a dell run their diagnostic test by pressing F12 at startup, if you don't have already done

  If you experience a problem with your computer, perform the checks in "Finding of Solutions" and run the Dell Diagnostics before you contact Dell for technical assistance. Run Dell Diagnostics may help you solve the problem without having to contact Dell. If you contact Dell, the test results can provide important information for the service of Dell and support staff.

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

  and here is how to reinstall vista from dell dvd computer

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  and if you have a dell recovery partition on your computer

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

• Windows Vista will not start just goes to windows error recovery

  I have owned my computer a year and a half and had a lot of problems with it. I had 3 replaced hards and a motherboard.  my computer is turned off, then back on error windows approached and evry time I click an option, the computer shuts down then restarts his return to windows error recovery. I tried to put the recovery disk in, but it does nothing I also tried windows made it sit and tried the disk that is supposed to find the r but nothing will work. all of the suggestions.

  
  

  Recovery mode f11 does not work as well

  even in f8 f10 if I push the options it just stops and returns to the menu of this same

  I think that it is high time they gave you another to replace this one!

  You had such a race of bad luck, it would be more advantageous for them replace then keep "fixing" for you.

  Good luck with them and thank you for the reply.

  See you soon. Mick Murphy - Microsoft partner

• Vista will not start and the Startup Repair boots in a blue screen of death. Why?

  I select run a startup repair, and it goes straight to the blue screen. When I start normally it justs sits there with the bar go green around and around. System Restore also dosen't help. I can boot into safe mode, but I don't know of other programs of Diagnostics. In addition, no virus. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!

  Read the posts by spirit MVP in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My CC app says that it is to install an update, not related to a product. It will not start and says it's installing an update. I can't sign in or use one of my apps or get my files

  Help

  Restart your computer and then try to open applications.

  I hope this helps.

  Concerning

  Megha Rawat

• "Error message: Verifing DMI pool Data data ', 'Boot from CD' and Vista will not start.

  Vista will not start. Yesterday I had a remote assist of a tech trade SPS who took several Java updates and installed the recommended Java version. Until I left work the day I closed my computer so that he could install the updates from Microsoft. After the updates were finished I he turned and left for the day. When I arrived this morning, I had was a black screen and 2 lines of text following: 'Verifing DMI pool data' and 'Boot from CD' and a cursor flashing beneath them. I downloaded and executed a Western Digital utility that showed no problems with the hard drive, put in on the installation disc repair service is no error. I did a system restore to a point since yesterday morning, and Vista still does not start. Any ideas or suggestions?

  Hi JohnHorky,

  Step 1:

  First check and make sure that all physical connections on the computer are correct.

  Step 2:

  Alternatively, you can try to run a Checkdisk and check.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. close all applications and restart the computer.

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Step 3:

  Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.

  I also suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.

  Important: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.