Vista will not start on Aspire 5515

Similar Questions

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• "Error message: Verifing DMI pool Data data ', 'Boot from CD' and Vista will not start.

  Vista will not start. Yesterday I had a remote assist of a tech trade SPS who took several Java updates and installed the recommended Java version. Until I left work the day I closed my computer so that he could install the updates from Microsoft. After the updates were finished I he turned and left for the day. When I arrived this morning, I had was a black screen and 2 lines of text following: 'Verifing DMI pool data' and 'Boot from CD' and a cursor flashing beneath them. I downloaded and executed a Western Digital utility that showed no problems with the hard drive, put in on the installation disc repair service is no error. I did a system restore to a point since yesterday morning, and Vista still does not start. Any ideas or suggestions?

  Hi JohnHorky,

  Step 1:

  First check and make sure that all physical connections on the computer are correct.

  Step 2:

  Alternatively, you can try to run a Checkdisk and check.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. close all applications and restart the computer.

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Step 3:

  Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.

  I also suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.

  Important: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

• Satellite A300 Vista - will not start cd/DVD with backup

  Hello world

  I have a big problem with Toshiba a300. Windows Vista is not starts.

  Watch only the menu with 2 options: first "fix the system" - when I choose this option 10 seconds later I see messeage: click OK to turn off the computer.
  When I choose the second option in my laptop restart every time.

  I tried after turning on the computer, press F8, but all the option in this menu do NOT fix the problem.
  I have no CV/DVD to my computer.
  After the first time I don't burn DVD with backup.

  I have really now how can I install system with recovery patriction. What softwere I need and how do I do it?

  Thanks for help

  Hello

  Sat A300 and other new models of laptops are equipped with HARD drive recovery option. This HARD drive recovery should allow you to recover the laptop without the use of all disks.
  In order to start the procedure for HARD drive recovery, you need to press F8. Then choose the first option called fix my computer. Then new window pops up and there you have to choose Toshiba HDD recovery. All that s.

  But if this procedure don't work (no matter why) then you will need to use the Toshiba recovery disc. If you n t create a floppy disk for recovery of a hand and the laptop will not start, then you will have to buy a drive for recovery of this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Vista will not start. Verifying the integrity of system files and repair has no ErrorCode = 0 x 2 HELP PLEASE!

  ASUS PC, Windows Vist Home premium, all updates.

  Out of the blue, it will not start.  Access the start scrolling (the one just before logon) screen and it just stops.

  Twice I ran Vista check utility.  The first time, I chose to do the system restore to previous state.  Restarted.  Always off.  The second time, it took much longer and from what I can see.  All TESTS PASS, except one:

  Repair action: repair and checking of the filesystem Integrety

  Result: failed. Error code = 0 x 2

  Time required: 6206818ms

  I get no blue screen, I can't even any screen!

  I'm triying to repar because I have several costly software titles that link the authorization key code to a key hardware and software installation.  I don't know that I could reinstall if I get a code (randomly?) different generated software.

  I don't know about i-tunes and other content downloaded my wife has such as MP3 files and audio books.

  Thanks for any help!

  The test fails (SFC) checks for corruption in the files on your system.  If she can't even complete, she suggests the Vista all system needs to be re-installed - but you have already done this and you still have the problem.

  In fact, look like a hardware problem.  Here are some troubleshooting guidelines hardware that can help (but probably not for this question as what you really need, it is a replacement for test):http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  Frankly, I think it's time to take the system to a repair facility of good reputation for the service computer (or to return to the manufacturer for repair - costs, schedule, guarantees and make a decision).  I don't know what hardware component.

  If you can, try to back up your data before you import it it because they will probably wipe the drive clean during the process. You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (perhaps done on another computer).  This should give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, try slaving the drive to another system and access the data in this way.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista will not start after start or restart.

  Since last week, when I first start the computer, change user or log out or reboot, Vista does not start after the log in password stage (after accepting the password). I usually have to restart the computer twice so he could finally enter the Office of habit and I can work as usual.

  I tried to let the computer some time at this point to work through and start normally, but it does not work and I have to restart.

  I recently updated my anti-virus (BitDefender) for the 2010 edition.

  I don't know if is the recent update to Vista which is originally or not.

  Uninstall Bit Defender and see if that fixes things. Antivirus programs use low-level drivers which can sometimes cause problems. If the uninstallation of Bit Defender work, use a different antivirus. I recommend ESET NOD32 (commercial) or Avast free. If Bit Defender Uninstalling does not help, then you may experience hardware problems. Failing power supply or hard drive that often produces symptoms such as you describe. MS - MVP - Elephant Boy computers - don't panic!

• Re: Vista will not start after the installation of update

  About 2 days ago I updated 2 Optional updates through windows update. It was - Input - Synaptics Synaptics PS/2 Port TouchPad
  and somethind to do with sound hdmi (don't know why I got this update ' cos I do not have a hdmi and I accidentally installed it as well).
  After that installs Vista won't start so I did a restore of the system in safe mode, and she came back to life, however, isn't in better shape, will probably not not to install Vista all over again.
  So be careful when you install these updates.

  It's weird that they came with windows update. As much I know usually windows update does not update if not needed harddrivers...

  You need to update your hardware drivers from the Drivers Toshiba download site and not from Windows update because no one knows if they interfere with the drivers of Toshiba.

• Windows Vista will not start or repair.

  Greetings!

  I'm having a problem with my computer. About 2 weeks, my Windows Vista out of nowhere began to fail in the market with the infamous and hated "cannot start Windows, a recent hardware or software may have... "and the options of start that none who work. I tried to fix it several times, but Windows would only start for an hour or two, and then the screen would go black. When I tried to start up, he would go back to the Windows cannot start message. I then completely reinstall windows, but every time I try the black screen comes back and the windows do not message starts again. I then tried to boot from an Ubuntu disc and install it, in vain the same black screen and message windows after that reload will appear. Now, the computer will only start with the windows form has failed every other power-up, otherwise the black screen appears. I looked inside my computer and everything is plugged tight, and I just checked my drive for errors of law before the failure, so I don't know what could be the cause of this.

  Help, please!

  Thank you very much!

  Brandon

  Hi noblesb,

  First disconnect the external devices connected to the computer except the mouse and keyboard.

  I suggest that you try the startup repair using the windows vista installation disc.

  1. Insert the installation disc.
  2. restart your computer.
  3. click on the Start button, click the arrow next to the lock button, and then click restart.
  4. If you are prompted, press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  5. choose your language settings, and then click Next.
  6. click on repair your computer.
  7. Select the operating system you want to repair, and then click Next.
  8. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If the previous step fails then check if the computer is able to boot into the advanced boot options.

  Steps to start in safe mode

  1 restart your computer if it is running.
  2. tap on the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Boot Options, you can stop tapping.
  4. use the up/down arrows to select your selection.
  5. Select Safe Mode and press enter.
  6. you should see loading drivers and wait please.
  7. you should then be on the Welcome screen.
  8. connect to your computer using an account with administrator privileges.

  If you are unable to boot into safe mode, then try any other fashion among early startup options, check out the link for more information below.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista will not start - I want my files

  I have so much data on my hard drive, but probably only a quarter of the space. One day, I had to use my laptop, but Vista wouldn't start. I turned off via the power button and not kept trying once again - no luck. On the normal start, he would charge for always on the Green loading bar 'Microsoft Corporation'. On system repair mode, it would stop right after this loading bar, on a black-blue screen. After several attempts, I am to decide get a new laptop. Here is some information on my old laptop: model: HP Pavilion Entertainment PC processor: AMD Turion 64 x 2 Windows Vista Home Premium please help me. If you know how to solve this problem, so I am able to make a recovery disk, please say so. If you know good ways to recover the data by other means, which would be also appreciated. Thank you very much. :)

  Yes, you can burn the iso to a DVD-R as well.

  http://www.CGSecurity.org/wiki/TestDisk

  TestDisk is available on several systems based on Linux. For the recovery and the work of diagnosis, one of the most user-friendly tools IMO is Parted Magic. Download the iso here:

  http://PartedMagic.com/download.html

  Instructions on how to burn it on a DVD are on this page. To use the bootable DVD, you have created, you must be sure that your bios boot sequence includes your DVD drive and place BEFORE the hard drive (this is my normal configuration). This way if there is a bootable CD/DVD in the optical drawer closed, the PC he uses. If there is no disk (or a non-bootable floppy disk) in the status bar, the PC will look for a bootable partition on your primary hard drive.

• Vista will not start even in mode without failure or will start up repair help

  Hello everyone,

  I've been many problems with my OS recently (Vista 32 bit business) and decided to reinstall (it was really a last resort). The relocation went well, but in the end, he got the black screen with the extended cursor and didn't budge (I left it overnight).

  I forced to restart at the end of the day, and now it won't start, it just says loading windows and displays the logo of loading, but will not charge.

  Safe mode will start to load the drivers, but then freeze, leaving a permanent list of drivers and a "Please wait".

  I tried to boot from the Vista startup disk, who works the Startup Repair very well and running. The first time, he said he found problems with the boot files automatically and then asks me to click on "repair and restart. Once I do, nothing changes, it's always the same.

  I tried to run a further startup repair, but it does nothing, just scans and scans and scans... but can't find anything in the newspaper (it is not passed the crawl log entry).

  I can access the features on the disc to start very well, so I ran guest and drive a DSKCHK (read-only), but again it froze in the third part.

  As far as I know all my hardware works fine, and a diagnostic scanning don't tell something abnormal.

  ... any ideas?

  Enjoy your time,

  Chris.

  Hi Chris,

  This resembles the faulty Ram or a hard drive does not properly, even if the systems on board diagnosis cannot capture an error!

  Of what you sayed I recon, it is a hard drive error more defective ram, try rerunning DSKCHK and see if it stops on part III, once again, if the fact, its probably your hard drive! Maybe someone else has a similar thought?

  Hope this helps with your problem.

  Jon

• Vista will not start. Loop continues to the Recovery Manager.

  I can't cross the Recovery Manager.  I tried a restore.  I tried to boot into Safe made.  All roads lead to Recovery Manager.  I get a blue screen that begins with the System Recovery Options

  For any info re .fbw format files backed up, contact HP directly.

  http://www.allformp3.com/extension/what-is-the-FBW-files.html

  You have several choices for the way to resettlement; read the info below...

  And is also included in this response data recording methods.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Your main hard drive data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista will not start and the recovery disc does not

  Hey all,.

  Vista has just started to freeze during the boot at crcdisk.sys today

  I tried using the recovery disk, but it won't work, says the root prolem is corrupt system or something like that.

  If you need more information please ask!

  Can someone help me?

  Thanks in advance!

  Hello

  Yes, it would make a difference to what is the Startup Repair tool. Vista startup repair only works on his own Bootstrapper. You replaced one with GRUB, so you should use the ' nix tools to fix it. However, you indicated earlier that the problem occurs after the start load Vista, so this isn't something the Startup Repair tool will correct and is not likely to solve your problem.

  Your running recovery disk will also likely be wipe the GRUB bootloader, but you don't really have a lot of options when it comes to a corrupted installation. If you are unable to correct the problem to running chkdsk, then it is unlikely that any other action will work. You're stuck with the relocation.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Satellite L30-101 - Vista will not start all I get a black screen

  Hey can any help me please I have a toshiba satellite l30-101 (PSL33E) with windows vista basic hoe

  I was updating my BIOS on toshiba website and while he was installing the battery has been disconnected and when I turned on my computer laptop back I got was a black screen, the fans would start and thecd rom would turn

  Ive triyed al the keys F and all the FN keys to bu that nothing would happen that also, I tried an external monitor and the same thing I got nothing on the monitor is a black screen then when I disconnected the mnitor a blue box would come on the screen saying no video input please attatch cable

  allsoo ive tried running the recovery disc, I put the cd in the CD-ROM drive would begins to spin, but nothing would happen that I tried all the F keys while the disc was running, but still nothing would happen

  could sumone if you please help me

  Post edited by: garethg83

  > I was updating my BIOS on toshiba website and while he was installing the battery has been disconnected and when I turned on my computer laptop back I got was a black screen, the fans would start and thecd rom would turn

  I m afraid the BIOS update has no procedure and therefore the ROM chip has not updated as it should. This is the reason why the laptop can not start correctly.

  I think that it of necessary to reflash the ROM BIOS module Once again, but this can be done only using a procedure of BIOS of crisis.
  As far as I know this can be done only through ASP because there is no traditional BIOS version by download.

• Vista will not start after update 04/09/09

  I have a HP tablet PC laptop vista a little home less than 2 years. I downloaded the updates, I unfortunately don't know what they where. My laptop was asked to restart I did. It turn off fine, but when he started toward the top of screen never came. It was late and I went to bed, thinking it was just a long update or something. The next morning, my screen is always black. I tried to start, but nothing happened. In the end I had to pull the battery to make it stop. I started again and the fan kicks on, and the monitor of the black stop at the lit on black as he was about to start, but nothing came on the monitor no splash screen not vista with the loading bar, nothing comes to any delay, not a pixel, not even a beep. I thought that the monitor was bad, so I tested the monitor by plugging it to my PC monitor of office still nothing on this screen, so I'm sure that computers portable monitor is good as all LEDs are lit and all. Food is good, I tested the battery on my friends computer of the same brand, it is fully charged. I can even things power out of usb. The only thing besides it not starting not not the least, is that the cd drive does not open. I brought out a cd holder thing and put my boot in her drive in the hope that something would come on the screen, but still absolutely nothing in black only. I tried to hit all the buttons f not one has nothing. I don't see anything else to do. I don't know how to test anything without any kind from screen. I backed everything up, so if I could get it just to run the boot disk I would take if I had to. Can anyone think of anything to do for her?

  If you have no boot at startup screen (Logo of Acer, DEll, etc.), what happens before the operating system starts.

  Your graphic/video control what comes on the screen.

  I would contact the manufacturer of the laptop.

  See you soon. Mick Murphy - Microsoft partner

• Windows vista will not start or start in any mode

  My windows vista 32 bit operating system does not start. I tried it in all security modes and last configuration. I also tried to start with an installation disk, but the disk does not start for me to fix it. It is said that windows could not start because of a hardware error and suggested that I leave my installation disc, but nothing happens. It just keeps going back to safe mode options. How can I fix start upward.

  Wat is the specific model of the system?

  Yes, many of the items in the list may not be part of your specific system - but if your system has wireless has bluetooth or has a smart card reader, etc. - it's order.  It has a chipset motherboard, audio, video, etc..  You just skip installation of items that you do not have by following the list.