Visual Studio 2010 with After Effects SDK?

Similar Questions

• Unable to connect to Visual Studio 2010 with patch SP1 & GDR TSF.

  We're trying to access collection server TFS 2013 from Visual Studio 2010 (with patches SP1 & RDA recommended by MS supports), but get error below.

  \

  First of all, we had problems with the application of SP1 & GDR patch, by MS supports, we repaired the v & re-installed these patches worked well. But after that we are gettign above error.

  can someone please tell how to fix this?

  Thank you!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Visual Studio 2010 Side By Side error invalid XML syntax

  I spent much of last week trying to research and make changes of trial and error to solve this problem, and nothing has helped. I am full of ideas. I get exactly the same results on all programs, on which I worked in Visual Studio. I also had it on Visual Studio once, forcing me to have to reinstall Visual Studio to correct.

  The question:

  I have just published a new i7 Windows 7 x 64 system base to replace my old system of Windows 7 x 32 i3. They both have the latest patches and the latest .NET until 4.5.2. I also use Visual Studio 2010 with all the patches except service pack 1 (although I tried at a time with the service pack and it made no difference). I also tried 4.6.1, .NET and it made no difference. This new system is brand new, with very little installed outside Microsoft Office, SQL Server 2012 Management Studio and Visual Studio 2010, Windows 7.

  For these past years, I've worked on 6 programs different here (so far), and we use TFS for source code control. On the new system, I lower the code and it compiles properly for all solutions. I can run the programs of many times without any problem and the event logs show any problem of their execution.

  Then, after restarting the system, none of the program will run. When I try to run one of them, I get immediately a dialog modal system indicating that the application has failed to start because its side-by-side configuration is incorrect.

  When you look at the event log, I always get the following error next message:

  Activation context generation failed for "[program]". Manifest error or the folder policy "[program] .exe." Configuration"on line 1. Invalid Xml syntax.

  NOTE: replace [program] with the path + name of the given program.

  I use the system generated 'by default' unmodified manifest files. I tried to review them and files config in XMLNotepad, and no problem was indicated, except in the manifest, he noted that the first schema referenced file assembly.adaptive.xsd which was not anywhere.

  When you review the configuration file, the line in question is:

  The original line of the app.config from which it is copied is:

  If I remove the encoding = "Windows-1252" part, the program runs without incident, although .NET puts the right encoding of part in the first run. I tried to put the udf-8 coding and .NET simply replaces the encoding with the above value at the start of the program. After a reboot, it is unable to run again for the same reason, until I have change the configuration again. This isn't a solution long term for production code!

  If I change the project settings and disable the Click Once security settings and set the project do not generate a manifest, then he works constantly (several tracks to try again and several restarts without incident). However, I use Click Once to deploy updates, so it's not a useful alternative to long term because at the time wherever I try to publish to Click Once, it changes the security settings of full trust automatically and generates a manifest, triggering the problem even once. This also causes the advertised program with the same problem for everyone who gets the update.

  These programs all compiled and ran on my old system without incident, even after multiple system restarts. They also have deployment click once without problem, and the click once deployment took place without incident.

  It is as if .NET does not recognize the encoding "Windows-1252". And, since the only real difference between my old and new systems is the former is x 32 and the new is x 64, so I think it has something to do with the x 64 version. But that is only a guess.

  My new system is essentially unusable as a system of development because of this problem at the present time.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to install the AE SDK in visual studio 2010 ultimate

  Hello

  I want to make plugins for visual studio 2010 ultimate, and I do know how to integrate my visual studio with AE SDK it is as if they are just files not installation package so I can click and install but I guess I have to configure the sdk, I work with the android sdk in eclipse, but don't know how to use it.

  BTW, I am a new programmer and learn this new language cool and also do work with after effects and 3ds max for the preceding 5 years.

  Help would be greatly appreciated.

  Thank you

  Unfortunately it is not clear detailed guide available to work with the AE SDK - well there was one of the early 1990s it's pretty hard to get through.  There should be one, however.  I wanted to write something like this some time ago, but thought I needed more experience developing with the SDK in order to write something solid.  Maybe its something that could be done in the future.  If you have specific questions, introduction VS 2010 for AE SDK, then by all means post the question here

  Best,
  Arie

• Visual Studio 2010 Express hangs after Windows Update

  June 11, 2010, I have 19 updates from Windows Update for my Windows XP Home SP3 Swedish (exceptionally many using the computer every day). After I rebooted, Visual Studio 2010 Express crashed at startup saying "(défini par l'utilisateur point d'arrêt-un point d'arrêt dans une application indique erreur de programme)." Re - installation of VS) did not help. Being run/scannow CFS does not report a problem any. Run the program in WinDbg, the program stops at a breakpoint in ntdll.dll. However, if I then go into the debugger program seems to operate normally. Also authorized the virus program Norton Internet Security (NIS) fails on startup with breakpoint in ntdll.dll. This should indicate that there was a problem with ntdll.dll, but all the tests that I ran to the DLL files are all problems. Other programs on the computer seem to work normally, including AVG 9.0 free virus checker, I installed to compensate for the NIS. NIS experts spent several hours in my computer without finding the reason. All clever out there who can help me?

  The problem is solved!

  I run the SDK Direct-X (latest version) in Debug mode and when I changed the retail fashion problems disappeared. Since there is no problem with Debug mode, before the updates of Windows, I guess that these updates were not compatible with debugging DLLs in the SDK. MS has probably forgotten to test in Debug mode or something. Instead however, annoying because the Debug mode is useful during the development of applications of DX.

• Scrolling Touchpad with Visual Studio 2010 problem

  Hallo,

  I had a problem with my type of coverage and Visual Studio 2010.

  I can not get the scroll of two fingers on the Visual Studio 2010 code editor. For unknown reasons, this only works when an initial open an editor window. But the problem is if I change the window or click somewhere else (when he first loses focus after opening).

  Two strange things are first of all, it looks like something (maybe windows itself) blocking the scrolling-signal and tries to move the window visual studio [1] and the second zoom gestures still work perfect to change the size of the text of the edotir.

  I've read that Visual Studio has some scrolling problems but such nut "sometimes I got the signal, sometimes not. So I thought that it is perhaps more a Windows 8.1 - 2 Surface Pro - Surface Type Cover - Bug.

  This problem has been since the beginning of the Installation Visual Studio-(one of the first installations), so I don't think it causes a third party program.

  Next to windows says that all drivers are up-to-date.

  Here is my system:

  Surface Pro 2

  TypeCover 2

  Windows 8.1

  Visual Studio 2010 SP1

  Thanks for the replies.

  Fabian

  [1] the same effect occurs if you want to scroll in Chrome without additonal settings/addons which make possible.

  Hallo Shiho,

  Thank you for your reply and your interest. I checked the problem once again and discovered that this is a problem in visual studio, because it does not block the signal of scrolling, but just go to the wrong window! Even if the cursor focus to the editor, it scrolls in the Properties window. If the cursor is in a function, it displays the properties of this function. Normally this property list is greater that the small window so TI fixers signals scroll to scroll in the list instead in the function code.

  

  So maybe the solution is just a change on the visual studio settings. The problem is not this more irritating because the work without a property showcase is a temporary solution too.

  Next to with a mouse wheel scrolling works properly (in the Editor window).

  To answer your questions:

  Yes, the view still works in other programs or applications in the Visual Studio property problem.

  Thanks again.

  Fabian

• I get the blue screen error after installation of Visual Studio 2010 Professional Test Edition. Help?

  A brief overview of ALALA situation and how it happened:

  1. I went to microsoft.com and download Microsoft Visual Studio 2010 Professional Trial Edition

  2. I opted to use the Installer web pro (4.3 MB) and it correctly installed, restarted and completed the installation.

  3. I opened one of my previous Visual Studio 2008 Solutions and it prompted me to convert the solution.

  4. it is the solution converted successfully and open well.

  But now for some reason any my computer started to give me a blue screen. It forces the computer to restart, and then it connects back with errors:

  "The system has recovered from a serious error, a log of this error has been created"

  "Error signature".

  BCCode: 1000007f BCP1: 00000008 BCP2: BA348D70 BCP3: 00000000

  "BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1.

  "The following files should be included in this error report:
  C:\DOCUME~1\DSmith1\LOCALS~1\Temp\\WER81ad.dir00\Mini10311-04.dmp

  C:\DCUME~1\DSmith1\LOCALS~1\Temp\\WER81.ad.dir00\sysdata. XML ".

  It's about every 30 minutes now. It only started after installing Visual Studio. Any help?

  Hello

  You can check this link:

  General causes of errors "STOP 0x0000007F"

  http://support.Microsoft.com/kb/137539

• Compiling with Visual Studio 2010 beta

  Hello

  I know that only Visual Studio 2005 is supported for the Acrobat SDK kit. But maybe one of you is also experimenting with visual Studio 2010 and got to work.

  I get the following error message. Anyone solves this problem.

  Error error 105 MSB3073: the command "if not"¬roSDKPIDir %"has ==" "has if not exist"% ¬roSDKPIDir"mkdir"% ¬roSDKPIDir""»»
  If not "% ¬roSDKPIDir' a ==" "a 'C:\Users\test\Documents\Visual Studio 2010\Projects\EPapers_Button\EPapers_Button\Debug\EPapers_Button.dll' copy '% ¬roSDKPIDir'"»
  If not "¬roSDKPIDir %" == «"echo EPapers_Button copied to '% ¬roSDKPIDir'.»
  If '% ¬roSDKPIDir' == ""echo not executed. " No value of the AcroSDKPIDir environment variable.

  ': VCEnd ' came out with code 255.

  Thanks for your help.

  I think that you should disable this type of Vista security.  Or you run VS "Run as Administrator".

• Problem with Visual Studio 2010, c# and SQL Server

  Several years ago, I programmed in Fortran. In order to get my stack of punch cards to run, I needed a couple of cards that said to the central computer what to do; It was very difficult to get this information as if it were some sort of secret. Today, I am using Visual Studio 2010, and programming in c#. It seems to work OK, but when I try to create a situation of SQL, I find that Windows authentication does not work; If I connect as long as administrator, I can see the database administrator; If I sign my name, I don't see a database created under my name, so that Windows authentication does not work. It seems that I need to know this little piece of information that nobody wants to tell me. I would like to work with an application that I'm developing, but if I can't trust him, I can't use it. I need seamless connections and unequivocal. Help!

  Hello

  It is not a community forum for Visual Studio.

  Try the Visual Studio forums.

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Don

• I CAN'T GET THE WINDOWS MEDIA PLAYER! Self-registration FAILED with Visual Studio 2010!

  Hello world!

  I just bought the Visual Studio 2010 Professional Edition, registered and everything. I have the Windows XP operating system and I wanted to do a media player using WindowsMediaPlayer, I. I saw on YouTube that all you had to do was simply right click, add click on choose the elements and go to components and click on WindowsMediaPlayer. I couldn't find that if I used Google and found that he had to go in System32, then click wmp.dll. After I did, he said

  "Self-registration impossible C:\WINDOWS\system32\wmp.dll.

  I want this thing so BADLY!

  Any help would be VERY VERY LARGELY APPRECIATED!

  Thank you

  TheElevatorMaster

  Hello
   
  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public to MSDN development.
  Please post your question in the MSDN Visual Studio category. 
   
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Visual Studio 2010 on Windows 7 64 bit does not start with error 0xc000007b Application

  Charge installation of Visual Studio 2010 Professional on Windows 7 64 bit
  Picked up SP1 before you run the first time.

  Running fails with:
  ---------------------------
  devenv.exe - Application error
  ---------------------------
  The application was unable to start correctly (0xc000007b). Click OK to close the application.
  ---------------------------
  Ok
  ---------------------------

  The Dependency Walker tool lists the following messages:
  Error: at least a module has an import unresolved due to a missing in an implicitly dependent module export function.
  Error: Modules with different CPU types have been found.
  WARNING: at least a delay load dependency module was not found.
  WARNING: at least a module has an import unresolved due to an export feature missing in a dependent module of lazy loading.

  There are two 64-bit dll that is referenced:
  IESHIMS. DLL and MSVCR100. DLL

  I can copy MSVCR100. DLL from C:\Program Files (x 86) \Microsoft Visual Studio 10.0\Common7\IDE\Remote Debugger\x86 in C:\Program Files (x 86) \Microsoft Visual Studio 10.0\Common7\IDE (next to devenv.exe) and I get the splash screen.  However, before the same load completely blocks.  Added an IESHIMS to 32-bit. DLL of C:\Windows\winsxs does not solve the startup crash problem.

  Not quite sure what else to try, any advice would be great.

  Hello

  For assistance on this issue, you can ask your question here:

  Installation and configuration of visual Studio

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

• compatibility of Windows 7 Home Premium with Visual Studio 2010, Visual Studio 2012, Sql Server 2008 and can be Sql Sever 2012.

  Hi, I'm going to buy a new laptop in which I get Windows 7 Home Premium. I'm going to use MS Visual Studio 2010, Visual Studio 2012, Sql Server 2008 and can be Sql Sever 2012. I'll use the other tools of development also. I just want to know fact these races of software in this operating system.

  It's the operating system have a compatibility issue with these software or other tools of development.

  Best place to look is the MS site for these products and consider the requirements specified

• Problem with the installation of Microsoft Visual Studio 2010 Service Pack 1 (KB2635973) and (KB2645410)

  Hello

  Enjoy views of expert here since I was a newbie in the Windows servers.

  I have an Exchange Server (Windows Server 2008 R2 SP1 Standard (the one used for the 2003 Server Migration) and now having issue to install 2 security updates below;)

  Update for Microsoft Visual Studio 2010 Service Pack 1 (KB2635973)
  Installation status: failed
  Error details: Code 66A

  Update of security for Microsoft Visual Studio 2010 Service Pack 1 (KB2645410)
  Installation status: failed
  Error details: Code 66A

  Tried to install and restart twice, but always failed. Did some research and found this link.

  https://TechNet.Microsoft.com/en-us/library/security/MS12-021

  However, with my basic knowledge, seems that I'm not sure the article.

  Grateful if someone could advise me on this.

  Kind regards

  Sir Kon.

  Hello

  Your question is beyond the scope of this community.

  Please post your question to the MSDN Visual Studio Forums.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio

  See you soon.

• I want to develop a plugin for photoshop cs6... How can I configure SDK on visual studio 2010 and comp

  I want to develop a plugin for photoshop cs6... How can I configure the SDK on visual studio 2010 and compile the code example... I added all the files, but visual studio is not able to find headers files... as they are included...

  Right-click on your project in the Solution Explorer, and select Properties.

  Click on C++-> General-> other Include directories

  Add in the files you need. It does not then you will need to add each file in turn.

  The dissolve example looks like this:

  .. \.. \.. \.. \PhotoshopAPI;...... \.. \.. \PhotoshopAPI\Photoshop;...... \.. \.. \PhotoshopAPI\PICA_ SP;... \Common;...... \.. () \Common\Includes;% AdditionalIncludeDirectories)

• XMP Toolkit with Visual Studio 2010 (or CCG)

  How to compile the XMP Toolkit with Visual Studio 2010 (Professional)?

  When I try to upgrade VS2008 project files, VS says they are "corrupt."

  A solution to compile the XMP Toolkit on Windows using GCC4 would help a lot, but it seems there are a few parameters for several Unix derivatives.

  Hello Duisol,

  Please take a look at the post I made recently on the forum, it includes a fix to add the compilation of gcc on windows.

  http://forums.Adobe.com/message/4421413#4421413

  Matthew