VLAN does not not as expected
Current configuration:
Firewall and route point for two networks (personal and guest). A port (port 1) for personnel and port (port 2) separate for the guest. Port 1 (staff) on the FW goes to a Dell connect 2724 with default config managed. All staff resources are on the dell connect. Also on the dell connect is a point of wireless access for staff. Port 2 (comments) plugs directly into a guest wifi AP (separate from the staff). Everything works.
State:
The wireless access point that we use is the Engenius EAP350 and it has the ability to have the SSID 8 each in their own VIRTUAL local area network. I'm looking to move the two networks wireless on a single access point.
To do this I moved the FW 2 port to a port of the printer dell connect (port 9) and put it in 2 PVID and changed the dell connect the port connected to the existing personal wifi AP (port 7) a trunk (tag 2) port. all other parameters are always default. Personal wifi is the vlan 1 and wifi of comments is vlan 2 and labeled on the AP. My hypothesis is that them VLAN are marked with the AP, authorized by the dell connect port port trunk and then requests DHCP for VLANs we then go to the FW through port a and dhcp vlan 2 go to the fw on port 9. It did not work. So to remove the AP of the equation all together, I've done 10 on the dell port connect a PVID in vlan 2 also and plugged in my laptop. Since the port 9 and 10 are the two access ports in vlan 2, all dhcp requests should be met by the FW on the correct subnet. However, it did not work. any ideas or examples that can be sent on the configuration of the access and trunk. I am very well versed on them with cisco, but dell connect do it a little different.
the AP can send some unidentified VLAN 1? If you are not correct, you will need to establish another VIRTUAL local network you can send Tags images for, for example, VLAN 3. And not use VLAN 1.
Tags: Dell Switches
Similar Questions
-
VLAN does not work on my ESXi 4.1
Hello world
I thank I could achieve this configuration fairly quickly, but it looks like I forgot something.
I want to connect to a real machine, I'll call her server to one of my virtual machine, using a 802. 1 q VLan. To do this:
-on my physical netgear switch, I created a new VLAN 802. 1 q, which has the id: 100. My server is connected to a port without a label to this VLAN '100 '.
My ESXi is connected to a port marked to this VLAN '100 '.
- then I created a new group of ports in the vswitch linked to my ethernet interface physical ESXi (the one that is connected to the netgear switch). I implemented the VLAN 100 id in this port group.
-J' I set up my VM so that it uses this interface ethernet port group.
The problem is when my ping on my server VM, it gets no answer: I see the appeal by the virtual machine on my server with tcpdump, then the response from the server with arp ARP response, but this arp reply never saw my VM.
So it seems that communication is correct VM to the server but no server VM. I use an ESXi DELL server with some ethernet interfaces and the one I use (broadcom interface) for the VLAN is not the management interface.
Thanks much for any help!
Alex
Alex
If your ESXi is connected only to physical port 1 and port is shared resources on the physical switch, then you should have a unique vSwitch in your ESXi. On this vSwitch, create two ports: one for one for VM3 and VM2. Give each group of port id VLAN different (2 for "port_group_2") and 3 for "port_group_3" and attach each VM to its corresponding port group.
Franck
-
Filling of camera works does not as expected in Android OS 4.0
Hi all
Recently upgraded to Ice Cream Sandwich (Android 4.0) on my model of Motorola Xoom Wi - Fi. Love it so far. I seem to have a new problem trying to create a camera effect fill of any kind. Steps to repro:
- Create any type of layer
- Press on the '&' > type 'bridge camera '.
- Try taking a picture; PS Edit then ends in a loop of treatment (with the four squares to the right animation)
If I try to use the 'back' button Android, I can go back to the Android home screen, and then re - enter PS Touch, who then proceeds to ask me if I want to save my snapshot (which is basically empty). I type any option and everything goes as usual (less PS touch do not take the picture).
I suspect it has to do with Ice Cream Sandwich and the new drivers for the camera of the Xoom. I tried uninstalling and reinstalling PS Touch that does not solve the problem.
Other that that, I have not found something else wrong while using PS touch under Ice Cream Sandwich. I notice a very little bit of performance increase also.
Just thought that I let you know and see if anyone else can repro.
Version 1.1.1 fixes all my problems. Fonts are back, selections so that work now complete camera very well. Yay!
-
newText works does not as expected
Hello all,.
I am using formCalc.
My form has a drop-down list box allows this custom text entry. On the change event is a script as follows:
SubformRecap.TableLiabilityRecap.Row [13]. Cell [1] = xfa.event.newText
The custom text entered only works when the user:
- start typing without displaying the menu choices drop-down or completely erases the text of an unwanted choice field
- then, type the custom text
- AND then press ENTER
The script fails to capture the newText if ONE of the following actions occurs
- does not completely erase the contents of the field drop-down box
- or highlights and types on the highlighted text
- or, use TAB instead of ENTRY when you have finished typing
When it fails the following text/integer appears in the referenced field: 1
I have limited user so I guess I could train, however, I would like to avoid that if possible. It's a great form and TAB the norm for the entry and exit of the fields. People use it on their laptops in the field - oddities like this in order to have a major nuisance.
Is the change the right event? Is there a way to enter (ENTER virtual) script?
Thanks in advance!
Stephen
Well, this problem seems interesting... I tried to rebuild, but nothing never is, for me it works in any case so far.
- start typing without displaying the menu choices drop-down or completely erases the text of an unwanted choice field
-
3rd interface VLAN does not add properly
Hello
I have some difficulty with a switch 300 series running in mode of L3. I created two VLANS each with an interface IP that work well without any problems. The problem I have is when adding a third interface VLAN and IP - for some reason the switch seems not add the subnet in its routing as a directly connected route table.
The first and second VLAN add correctly. It seems to be the third. I have factory default, the switch and still the same. Version is 1.1.2.0.
The Setup is as follows:
VLAN1 - 10.20.2.253/24
VLAN2 - 192.168.2.253/24
VLAN3 - 192.168.3.253/24
Ping results are:
switch27b42e #ping 10.20.2.253
Ping 10.20.2.253 with 18 bytes of data:
18 bytes from 10.20.2.253: icmp_seq = 1. time = 0 ms
18 bytes from 10.20.2.253: icmp_seq = 2. time = 0 ms
18 bytes from 10.20.2.253: icmp_seq = 3. time = 0 ms
18 bytes from 10.20.2.253: icmp_seq = 4. time = 0 ms
-10.20.2.253 PING Statistics-
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/0/0
switch27b42e #ping 192.168.2.253
Ping 192.168.2.253 with 18 bytes of data:
18 bytes to 192.168.2.253: icmp_seq = 1. time = 0 ms
18 bytes to 192.168.2.253: icmp_seq = 2. time = 0 ms
18 bytes to 192.168.2.253: icmp_seq = 3. time = 0 ms
18 bytes to 192.168.2.253: icmp_seq = 4. time = 0 ms
-192.168.2.253 PING Statistics-
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/0/0
switch27b42e #ping 192.168.3.253
Ping 192.168.3.253 with 18 bytes of data:
PING: net-unreachable
PING: net-unreachable
PING: net-unreachable
PING: net-unreachable
-192.168.3.253 PING Statistics-
4 packets transmitted, 0 packets received, 100% packet loss
Additional output which can be interesting:
switch27b42e #show ip int vlan 1
Type of priority status done IP address
Broadcast
------------------- ----------- ---------- ---------- -----------
static 10.20.2.253/24 disable invalid
switch27b42e #show ip int vlan 2
Type of priority status done IP address
Broadcast
------------------- ----------- ---------- ---------- -----------
static 192.168.2.253/24 disable invalid
switch27b42e #show ip int vlan 3
Type of priority status done IP address
Broadcast
------------------- ----------- ---------- ---------- -----------
static 192.168.3.253/24 disable invalid
switch27b42e #show ip route
Maximum parallel paths: 1 (1 after reset)
IP routing: enabled
Code: C - connected, S - static, D - DHCP
C 10.20.2.0/24 is directly connected vlan 1
C 192.168.2.0/24 is directly connected vlan 2
What I am doing wrong?
Thank you in advance.
Craig
Hi Craig,.
I don't think you're doing anything wrong.
The command line shows that this IP for VLAN3 interface is not connected, or at least nothing is connected physically VLAN3.
Connect a PC VLAN3 and see if the interface road happens.
I guess just that nothing is plugged physically vlan3.
regards Dave.
-
handheld at 1 pixel brush works does not as expected...
Hello everyone :-)
When I try to draw a simple freehandline with the tool draw we get this before I release the mouse button:
That's how I expect the line to be in the final drawing.But instead I get this so after releasing the mouse button:
I'm using this brush settings:
So he must produce a solid rounded 1 pixel brush stroke... In Illustrator CS6 this worked as expected.
What I am doing wrong? :-o
All apreaciated advice! :-)
Have a good day, cyan68"Einfach" means "without a brush.
But: the Brush tool will not work without a brush, he always apply a brush.
The pencil tool is what you want. Really.
It works exactly like the Brush tool, but without having to apply a brush.
-
Poster works does not as expected with Adobe CS5
I've finally updated to OS X on an early 2009 Mac Pro Quad Core. I have two screens: a 20 "Apple Cinema and a Samsung Syncmaster. Previously, always with Snow Leopard, I had no problem with the implementation of my menus, panels, etc on the Samsung, thus leaving my film clean and only to view the picture or painting under development. It's a great ploy.
But now, I can't have my workspace (menus, panels and so on) to "stick" to the Samsung. Instead, they insist on layering anything I'm working on the cinema, which is now difficult to see behind all the clutter menus and panels.
I tried to move this to the Samsung, and I saved the arrangement as a new workspace. But the next time and so on, I opened Photoshop, all the menus were back on my film. It is a problem, I expected little, all the problems you may have. But it is serious because I'm not keen on having to pass all the other screen before starting work. In addition, it could be the cause? None of the existing workspaces or those custom made displays on the second monitor except if moved manually.
I'd appreciate responses as to why this is happening. Thank you
-Try to reset memory NVRAM/PRAM and SMC
-
T440: m.2 speed NGFF SSD does not as expected
Hello world
I bought the 128 GB model of the MyDigitalSSD Super Cache 2 (see here). Write speeds are as expected, about 170 - 190 MB/s. However, the playback speed is capped at 270 MB/s, although it should reach well above 400 MB/s. It is confusing to me. I installed the SSD m.2 in the same location where the original cache my T440 (16 GB, SanDisk) module has been installed. "My disk info' indicates that the drive works in mode ' Serial ATA/600", as I figured first it can be flown just SATA/300, and therefore it would make sense that the playback speed is capped at "."< 300="" mb/s.="" but="" this="" doesn't="" seem="" to="" be="" the="">
Is that what I can do to improve performance?
See you soon!
NZ
SOLUTION: Install the SSD drive in slot m2 next to one that contains the WIFI module. It will be free if you order the module WWAN / 3G. But it supports SATA III, while the slot under the battery is apparently not. In this regard, I am puzzled why Lenovo installed the module cache SATA original there.
-
Events in Subvi works does not as expected
Hi, I'm reposting this question because my previous one did not lead to a satisfactory conclusion.
I enclose my Vi which do not work as expected. If I remove a Subvi and its controls of 3 partners and two indicators, it works fine, but when I add two screws SUB, it's messy. I'm learning in this way, I don't know it can be done a lot of other ways, but please help me find the problem, do it this way in my final MainVi, I would use Live 8 such void. Thanks.
Your main problem is the FLOW OF DATA. A loop can not browse all what it has not completed. So, as you have, you must have the two structures of event execture before you can go back to look for the next event. So if you insist on having these subVIs, they must be in separate loops.
BTW, you can get away with a single Subvi. Go to the properties of VI and make incoming (preallocated clone). Then, each call to your Subvi has its own memory space. Much easier to maintain this mode.
And I know you said you didn't want alternatives, but here's how you can do it with a unique structure in your main loop.
-
Backup of Windows 7 - change the settings - works does not as expected
I'm trying to configure the backup of Windows 7 by using the "Change settings" option, but when I click on the link, all I get is a the Explorer window showing the contents of c:\Windows\System32
Same thing if I click on the link 'manage space '.
What I am doing wrong? or is it a mistake?
Had the same prob, winlocker and shredder in the context menu, uninstalled winlocker and voila, backup now works.
So, try to uninstall the software that hangs in the context menu (the menu "right click") and see if it works. Not interested in why at that time [is really starting to enjoy my Kubuntu box] -
HTTP POST works does not as expected
I can't understand why the POST with data works when I use Firefox, but not when sent from the BlackBerry. The only difference seems to be that the BlackBerry less sends the headers, but it's all legal HTTP.
It's TCP data are sent to the server (from recorder package):
----------------------------------
HTTP/1.1 POST/page
Host: localhost
Connection: close
Content-Length: 8test = abc
----------------------------------
That sounds about right. However, the Web Server table $_POST (PHP) is empty.
Code follows:
HttpConnection c = (HttpConnection)Connector.open(connectionString); c.setRequestMethod(HttpConnection.POST); DataOutputStream out = c.openDataOutputStream(); URLEncodedPostData postData = new URLEncodedPostData(URLEncodedPostData.DEFAULT_CHARSET, true); postData.append("test", "abc"); System.out.println("requestData: " + new String(postData.getBytes())); out.write(postData.getBytes()); //out.flush(); c.getResponseCode(); InputStream is = c.openDataInputStream(); LineReader lr = new LineReader(is); while(true) { try { byte[] arr = lr.readLine(); System.out.println("Line: " + new String(arr)); } catch(EOFException e) { break; } }
Everyone knows about similar problems using POST?
See you soon,.
Pav
Update:
-J' tried this on 2 servers Web (Apache + PHP) unrelated, both have the same problem.
SOLVED!
I tried to put different headers that Firefox sends inside the request of BB and it does the job:
c.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");
Hope it saves someone out there a lot of frustration :-)
-
I have one unit with two SSID AP1252 (private = VLAN1 & Public = VLAN3). The SSID:Private is the VLAN native and works very well. The SSID:Public has customer problems. AP, I ping my VLAN3 gateway on the router. Customers can connect to SSID:Public and in the GUI, it shows the association. But the client cannot obtain a DHCP of SSID Public address. I put a static IP address on the client on the local network VIRTUAL 3, but still cannot ping the gateway. I don't know where I was wrong.
Your Setup looks perfectly fine. Something is not right on your switch/router/dhcp.
SWITCH, make sure you're trunking:
interface FastEthernet0/1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1.3
switchport mode trunk
spanning tree portfast trunk
On the router, make sure that you've got to support pointing to DHCP or if you have a DHCP pool configured for the vlan 3.
-
Backups of Vista won't start does not as expected
Backups of Vista were starting automatically as scheduled for the last 3 years, but now they do not start automatically. The backup works fine when I start it manually. I did not any changes to the schedule or to the device where the data is stored (external USB disk). I recently put on maintenance of Vista via Windows Update, did not observe other problems. Running Vista Home Premium 32-bit on a PC from Dell Quad with 4 GB of memory. Any ideas on what is at the origin of the outbreak of backups to fail?
Thank you
zxk1Hello Zxk1,
Thanks for posting in the Microsoft Answers forum! I suggest that search you your computer for any virus infection that may hinder your scheduled automatic backups. Below you will find a sew websites that provide public services that allows you to scan your computer from viruses and spyware:
Microsoft Windows malicious removal tool
This tool checks your computer infections by specific, prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps to remove the infection if it is found. Microsoft will release an updated version of this tool the second Tuesday of each month.
http://www.Microsoft.com/downloads/details.aspx?FamilyId=ad724ae0-e72d-4f54-9ab3-75b8eb148356&displaylang=enSuperAntiSpyware
SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms.
http://www.SUPERAntiSpyware.com/download.htmlBytes of Malware Anti-malware (Freeware)
http://www.download.com/Malwarebytes-anti-malware/3000-8022_4-10804572.htmlTrend Micro HouseCall - Free Online Virus and Spyware Scanner
HouseCall is a free on-line virus scanner offered by Trend Micro, which checks if a computer has been infected by viruses, software spyware or other malicious software. HouseCall performs additional security checks to identify and fix vulnerabilities to prevent re-infection.
http://housecall.trendmicro.com/Please let me know if this helps t solve your issueJ
Adam
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I have two samsung n140 NetBook, both come with Windows 7 starter, I try to get things homegroup networking.
I have set up with the default values at the same time to share the photo, video files etc under homegroup sharing.
He was asked to create a password for homegoup I did it (could have come because I have a NetBook connected initially to a pc running win 7 ultimate, which is where I created a homegroup password but this pc is no longer connected to the network, it's just two samsung netbooks)
in any case when I connected this other netbook with the first he asked me the homegroup password that was entered successfully by me. However, nothing has been free since. These two netbooks running win7 are the only PCs in my home group.
Ive managed to get to a point where in the record of the house band that netbook names are displayed in eachothers homegroup however is listed in network for the group shares residential eachother trying to access the network.
Can I cannect for both computers on the network in the way outdated by sharing folders and access the network folder in my network places and can read and write, but not in the home group.
Homegroup is where I want to control networking not by any other means, I would be very grateful if someone can point me in the right direction please or if its win 7 starter limit myself from network access to the homegroup.
Thank you very much
Hey fatfei,
Welcome to the Microsoft Answers site.
I want to erase some of the basics of networking in Windows 7 Starter edition.
You cannot create a homegroup to a computer running Windows 7 Starter Edition. You can reach only a HomeGroup existing of the starter edition.
This must be one of the restrictions placed on you while trying to connect the two starter edition of Windows 7 homegroup.So the only option left out here is upgraded to another version of Windows 7 that supports creating HomeGroup via Windows Anytime Upgrade or stick to the way they are connected at present.
For more information, please read this article.
Networking in Windows 7 Starter
http://Windows.Microsoft.com/en-us/Windows7/networking-in-Windows-7-StarterHomegroup: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questionsKind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Script works does not as expected
Script should auto set annotations for me, it was taken directly from "VMWare vSphere PowerCLI référence" Chapter 5
$VM = get - VM 'test '.
$VM - get-VIEvent-entity Types information |
Where-Object {$_.} GetType(). Name - match "VmBeingDeployedEvent". VmCreatedEvent | VmRegisteredEvent | VmClonedEvent"} |
{ForEach-Object
Set Annotation - entity $VM - CustomAttribute CreatedBy-value $Event.UserName
Set Annotation - entity CustomAttribute - CreatedOn - $VM $Event.CreatedTime value
}
This is the error:
Set Annotation: Impossible to validate the argument on the parameter 'value '. The argument is null or empt
y. provide an argument that is not null or empty, and then try the command again.
The Custom vars.ps1:8 char value: 15
-Value + < < < < $Event.UserName
+ CategoryInfo: InvalidData: (:)) [game-Annotation], ParameterBindingValidation)
Exception
+ FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutomation.ViCore.
Cmdlets.Commands.SetAnnotation
Set Annotation: Impossible to validate the argument on the parameter 'value '. The argument is null or empt
y. provide an argument that is not null or empty, and then try the command again.
The Custom vars.ps1:11 char value: 15
-Value + < < < < $Event.CreatedTime
+ CategoryInfo: InvalidData: (:)) [game-Annotation], ParameterBindingValidation)
Exception
+ FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutomation.ViCore.
Cmdlets.Commands.SetAnnotation
However a coupe version of the script:
$VM = get - VM 'test '.
$VM - get-VIEvent-entity Types information |
Where-Object {$_.} GetType(). Name - match "VmBeingDeployedEvent". VmCreatedEvent | VmRegisteredEvent | VmClonedEvent"}
Returns:
Model: false
Key: 1022221
ChainId: 1022221
Createduserid: 17/06/2011 10:52:15
Username: EXAMPLE\Me
Data Center: VMware.Vim.DatacenterEventArgument
ComputeResource: VMware.Vim.ComputeResourceEventArgument
Host: VMware.Vim.HostEventArgument
VM: VMware.Vim.VmEventArgument
Ds :
Net :
Dvs :
FullFormattedMessage: Created the test of the virtual machine on vm6.example.com
ChangeTag:
DynamicType:
DynamicProperty:
I don't know if that makes a difference, but I am running 4.1u1 and 4.0 vSphere powerCLI
Someone knows why?
EDIT: running variable dir: dosent seem to show $Event as existing, $VM is here
You need to replace $Event with $_ because you get the value of the line. Like this:
$VM = Get-VM "test" Get-VIEvent -Entity $VM -Types Info | Where-Object { $_.Gettype().Name -match "VmBeingDeployedEvent|VmCreatedEvent|VmRegisteredEvent|VmClonedEvent"} | ForEach-Object { Set-Annotation -Entity $VM -CustomAttribute CreatedBy -Value $_.UserName Set-Annotation -Entity $VM -CustomAttribute CreatedOn -Value $_.CreatedTime }
Best regards, Robert
Maybe you are looking for
-
What is the highest configuration of X 230 available?
Hello What is the best/most quick configuration / highest X 230? I have trouble finding this information. Currently, I have the model i7 - 3520 M 2.9 GHz 16 GB IPS and want another one (X 230), preferably the best available configuration. Best regard
-
I installed a wrong address "send to" in the address book that is in "e-mail scanning" on my HP 8600 Premium. How to remove it without losing the other addresses I put in? Thanks Marty
-
I have this system, HP pavilion dv4-1135TX downgraded to XP. I installed all the drivers including the sound drv (IDT audio and Nvidia) and everything worked fine. I played even music with her BUT after system reboot, the sound has disappeared. Thank
-
Short cut and Document link problem
Some of my shortcuts on the desktop do not work. also when I have a link in a Word document it does not connect and then I get a message: "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system ad
-
Hello, recently one of the windows files does not so I had to recover. The disks that I created did not run, saying he not for the specefied system. I bought a new hard drive and also tried on the old hard drive. So I ordered disks from HP for my spe