vmblock compilation fails silently in the 64-bit Fedora 17 comments

Similar Questions

• FPGA Compilation fails because of the mistake of Xilinx

  My FPGA compiles and I cannot understand why. There is nothing crazy in my FPGA VI of really, it seems strange to have this type of problem. I can't reach the code because its owner, but it's pretty simple because it reads all channels from a single module and records them in a data FIFO. I have compiled successfully any FPGA code on this computer, so I should definitely have everything needed to compile.

  My system consists of one NOR cRIO 9030 with a single module 9220. Below is the Compilation of summaries.

  ---

  LabVIEW FPGA: Compilation failed due to an error of Xilinx.

  Details:
  ERROR: [Synth 8-1031] knidmahighspeedsinkbase is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:295]
  ERROR: [Synth 8-1031] knidmahighspeedsinksize is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:296]
  ERROR: [Synth 8-1031] knidmahighspeedsinkbase is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:301]
  ERROR: [Synth 8-1031] knidmahighspeedsinkbase is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:302]
  INFO: [Synth 8-2810] pkgshimswitchedlinkdmaportifc unit ignored due to previous errors [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:68]
  ---------------------------------------------------------------------------------
  Development of finished RTL: time (s): UC = 00:00:07. delay = 00:00:31. Memory (MB): peak = 798.605; gain = 204.203
  ---------------------------------------------------------------------------------
  ERROR: [Common 17-39] 'source' is not due to previous errors.
  INFO: [Common 17-83] release license: synthesis
  3 info, 0 Warnings, 0 critical warnings and 4 errors.
  synth_design failed
  : ERROR: [Common 17-39] 'source' is not due to previous errors.

  When running
  «source - notrace.» /. Xil/Vivado-6035-ip-10-60-203-176/realtime/toplevel_gen.tcl ".
  called inside
  «synth_design-top "toplevel_gen" - part "xc7k70tfbg676-1"-"full" flatten_hierarchy "»»
  (file "/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/synthesize.tcl" line 21)
  called inside
  "source" / opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/synthesize.tcl "" "
  exit #.
  INFO: [Common 17-206] exit Vivado at Tue Mar 24 23:58:54 2015...

  Compile time
  ---------------------------
  Introduction date: 24/03/2015-16:46
  Date recovered results: 24/03/2015-17:00
  Waiting time in the queue: 00:24
  Compilation of time: 13:22
  -Generate a Xilinx IP: 00:00
  -Summarize - Vivado: 01:27

  Compilation has restarted on
  24/03/2015-16:57

  ---

  Any help would be much appreciated!

  Thank you

  James.Morris wrote:

  Okay, so it seems that I get the error with a project from scratch and an FPGA with a single command and an indicator.

  I download the latest FPGA 2014 SP1 installation and I hope that will solve my problem.

  Well I'll mend, which fixed the problem! Somewhere along the line, my install FPGA must be corrupted.

  Thanks for the help, guys.

• Export failed to achieve the required bit rate and colour care space - ProRes 422 in MPEG2

  With the help of first Pro CC v7 I exported a ProRes 422 (HQ) MPEG2 file and selected the HD 1080 p 23.976 preset.  I needed the finished file to have a minimum of 50Mbps flow and the color space to be YUV422.  I was under the minimum flow rate and the color space is incorrect. Can someone please instruct me on how to get my desired results. Thank you!

  MXF OP1a XDCAM options are hard wired for the correct settings for each preset - in the case of 422 @ 50 mbit, it already uses a preset CBR (constant bit rate).  The main codec Concept always Compress contents, so it is quite possible that your source material will eventually take less space than 50 Mbps, depending on the complexity of the images.  There is nothing to replace it, you can change, it's just the codec do its thing.

  I don't see how the color space was incorrect, unless you take what you think that you have chosen.  Make sure you're one of the presets that has 50 in the name, picking, and other (18/35) VBR and space colorimetric 420.   You can check the presets under the video tab - if you have a 50 mbit preset selected, the video codec should list something like "XDCAM HD 50 NTSC (4:2:2)".

  Wil

• LabVIEW FPGA: Compilation failed due to an error of xilinx

  I'm getting a 'Compilation failed due to the error of Xilinx' you try to compile the code in LabVIEW 2013.The code has successfully compilated in labview2012. Any suggestions on what is causing this problem?

  Details:
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd" line 29: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaSetOutputDataEnable.vhd", line 37. cparametersignal is declared here
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd" line 21: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd ignored errors
  -->

  Total memory use is 204688 kilobytes

  Number of errors: 2 (filtered 0)
  Number of warnings: 4 (filtered 0)
  Number of news: 0 (0 filtered)

  "Synthesize - XST" process failed

  Compile time
  ---------------------------
  Introduction date: 2014/2/26 18:15
  Date recovered results: 2014/2/26 18:17
  Waiting time in the queue: 00:06
  Compilation of time: 02:02
  -PlanAhead: 01:16
  -Generator kernel: 00:00
  -Synthesis - Xst: 00:35

  Hi guys

  I think I can give you a helping hand on this.

  I have the same problem when I'm working on the Tutorial (2013) exercise 2 with Rio evaluation Kit.

  You can try one of the following option.

  Solution 1.

  1. in the VI package manager.

  Select 'Tools '->' Options'-> "General '->' package Installation"-> Unchecked 'mass Compile screws after Installation of the package.

  Solution 2

  1. in the VI package manager, uninstall the driver LCD

  2. unchecked "Mass compile screws after Installation of the package" (see Solution 1)

  3 reinstall the driver of the LCD screen.

  Mine did after Solution 2 and the compiler works.

  Hope it will be useful for you guys.

  Thank you

• Problem with the compilation by using the new compiler (Compilation failed during execution: compilation-abc)

  Hello

  Since the release of the fast compiler, I experienced problems with the compilation of the version release with it.

  As it was still in beta, and since it was still possible to use the legacy compiler, I chose to use the legacy compiler each time (especially since it was more stable).

  With this 64-bit iOS requirement came into play on February 1, the legacy compiler is no longer available because it has been completely removed from AIR 16 (and all future versions).

  Now, I can no longer compile release versions (debug versions are works well) because I have the following error every time:

  Error occurred during the application of packaging:

  Stack dump:

  0 program arguments: C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/bin/compile-abc / compile - abc.exe - mtriple = armv7-apple-ios - filetype = obj - sdk C:\Program Files\Adobe\Adobe Flash Builder 4.7 (Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/lib/avmglue.abc 64-fields C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/lib/air-fields.)) arm-air.txt-O3-ane-symbol = MmgCmApiExtInitializer - ane-symbol = MmgCmApiExtFinalizer - ane-symbol = MmgRbApiExtInitializer - ane-symbol = MmgRbApiExtFinalizer - ane-symbol = MmgStoreKitApiExtInitializer-ane symbol = MmgStoreKitApiExtFinalizer-ane symbol = MmgGoViralApiExtInitializer-ane symbol = MmgGoViralApiExtFinalizer-ane symbol = MmgGaApiExtInitializer - ane-symbol = MmgGaApiExtFinalizer - ane-symbol = MmgGAIDFAAccessApiExtInitializer - ane-symbol = MmgGAIDFAAccessApiExtFinalizer - ane-symbol = AFExtensionInitializer - ane-symbol = PushwooshExtInitializer - ane-symbol = PushwooshExtFinalizer elease-temp\AOT\AOTBuildOutput4982262150932522887.tmp\ABCFilesList.txt-abc-file-list=C:\BingoIslandWeb\Client-branch-1.06.05\BingoIslanMobile\BingoIsland\bin-r

  Compilation failed during execution: compilation-abc

  
  

  I tried to pin-point the source of the problem leaving specific things in the code, while removing all the rest,

  But so far, all I could find is that he has a problem with the classes that extend EventDispatcher.

  Anyone encounter this problem and knows how to work around it?

  Thank you!

  
  

  
  

  I had this problem also with other things. It was difficult to solve. Remove all const and var conversion in the Document class solve my problems

• IE (x 86) fails on some links, but the 64-bit version does not work

  When I select a link on a Web site; the latter being a link to a PDF document, IE fails, attaemts to correct and eventually disconnects from the Web site. I just tried the same site and links using IE 64 bit version and it works without problems, just like Firefox.

  If the 64-bit version of Internet Explorer must be the value by default, so how can I do to set it as the default (it does not appear on the page "default parameters".

  Thanks in advance,

  Dan

  Hello

  I understand that after uninstalling McAfee Internet Explorer works fine. However, it is not recommended to use the computer without antivirus application because the computer is vulnerable to viruses and other security threats.
  Microsoft Security Essentials is available for free from Microsoft. You can install it on your computer.
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials
  If you want help with McAfee, you can contact them on this link. http://home.McAfee.com/root/support.aspx
   
   

• Windows Media 32-bit Player has stopped working with the error "failed to run the server.

  Original title: Windows Media Player does not start

  I am running window 8.1 on a HP laptop.  I have the two 32-bit and 64-bit Windows Media Player installed, I can start 64-bit with no problem, but 32 bit work do not.  When I try to play music directly I get the error "Server execution failed", I tried all the option provide fron uninstall and reinstall as has been suggested, but nothing helped.  I need to have the 32-bit to run or have the 64-bit by default. Help!

  Thanks for the reply, but after working with it, I solved the problem.

  1. rename the program (x 86) folder (32-bit) / Windows Media Player for everything you want

  2 copy the Windows Media Player folder in the Program Files (64-bit) folder and paste it into the program file (x 86) folder.

  3. This puts an uncorrupted in the default path, Windows Media Player

  This worked very well for me.  It also leaves a version uncorrupted for future needs.

  Sometimes simple is better.

• Just bought Photoshop elements 13. Failed to install. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.Where is the 64-bit version?

  Just bought Photoshop elements 13. Failed to install. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.Where is the 64-bit version?

  PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  PSE 13 trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements

  (Info for PC vs Mac: https://forums.adobe.com/thread/1658959?sr=inbox&ru=3738552)

• 970 GTX unsupported? After effects error: drawn in the 3D Department: Initial shader compilation failed (5070: 2)

  I am disappointed that my MSI GTX 970 is not supported for 3D ray-traced in Adobe after effects CC 2014.
  My configuration:
  Intel Core i7 4790 k 4.4 GHz
  8 GB DDR3 1333 MHz RAM (fix 16 GB soon)

  MSI GTX 970 games 4G

  Windows 8.1 Pro x 64

  Card GPU:

  Fast draft:	Available
  Texture memory:	1562 MB
  Ray-tracing:	CENTRAL PROCESSING UNIT

  (Not available - GPU CUDA driver or incompatible device)

  OpenGL

  Seller:	NVIDIA Corporation
  Feature:	GeForce GTX PCIe/970/SSE2
  Version:	2.1.2 NVIDIA 344.75
  Total memory:	3.81 GB
  Shader Model:	4.0 or later

  CUDA

  Driver version:	-
  Features:	-
  Current usable memory:	-
  Maximum usable memory:	-

  I don't have the option "Enable CPU untested, not taken in charge for acceleration or traced to the 3D renderer Ray CUDA" but when I have him allow, I get an error saying:
  "After effects error: drawn in the 3D Department: Initial shader compilation failed." (5070:: 2) ".

  then

  "After Effects Error: drawn in the 3D Department: unable to create the context for Raytracer (5070: 2)" "

  then another

  "After Effects Error: drawn in the 3D Department: paged memory mapped to a Raytracer." Your project may exceed the limits of the GPU. Close other applications. Try to update the CUDA driver. (5070:: 2) '

  
  

  I have the latest Nvidia driver. Anyway to fix this? Or I have to wait for Adobe support my GPU?
  

  I'd suggest ditching forced the C4D and ray traced rendering engine instead of use: Details of CINEMA 4 d with After Effects integration

  I mean, it's more powerful and it's free!

  If you absolutely need to use ray-traced rendering engine, what are you trying to use it on? Try it with only a layer of simple form you need to do 3d just to eliminate the problems of others, possibly complications, a project. What CC 2014 version are you running? 13.1? 13.2?

  Don't forget, Adobe is never going to add to the list supported for rendering engine raytraced as they develop is more this feature.

• Failed to start the bb4.5 Ubuntu 11.02 64 bit client

  I can't get my client to run. BBOUT said "nohup: cannot run command ' BBHOME/bin/bbrun': no such file or directory".

  I checked that BBHOME is correct.

  I checked the path of nohup is correct.

  BBHOME/bin/bbrun exists and is bbuser:bbuser 755

  Anyone have any ideas?

  do you have defined external scripts in bb-bbexttab? If so, comment out for now and try to start the BB.

  If it works, add an external at the same time until you get the error

  or I just noticed something...

  BBOUT said "nohup: cannot run command ' BBHOME/bin/bbrun': no such file or directory".

  Why the BBHOME/bin/bbrun is the command that fails as in the code?

  WHT is the value of BBHOME top runbb.sh? It must be a directory, not '& BBHOME '. If it's '& BBHOME', you probably doesn't bbconfig/install to install the client.

• problem with vpnclient 64 bit for windows 2003 //442:failed to activate the virtual card.

  Hello

  I need to know is below customer vpn will work for windows 2003 64-bit, according to the release notes I doubt it will work.

  name of the file - vpnclient-winx64-msi - 5.0.07.0290 - k9.exe

  release notes - http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537

  WILL take the ip address but does not connect. It is possible some configuration or ASA image issue that her first time, we try to use 64-bit OS, for 32 bit OS vpn client works very well.

  on the pc screen, it says - reason-442: impossible to activate the virtual card.

  Here are the logs of vpn clinet when I tried to connect ASA5520. Version 7.0 (8).

  Cisco Systems VPN Client 5.0.07.0290 Version
  Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
  Customer type: Windows, Windows NT
  Running: 5.2.3790 Service Pack2
  Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\

  1 15:38:03.921 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  2 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  3 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  4 15:38:04.125 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  5 15:38:04.140 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  6 15:38:09.515 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  7 15:38:09.515 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  8 15:38:10.562 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  9 15:38:10.781 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to activate the 64-bit GOES after timeout

  10 15:38:10.781 27/01/11 Sev = WARNING/3 CVPND/0xE3400029

  The Client was unable to activate the virtual card on 64-bit Windows

  11 15:38:10.781 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  12 15:38:10.781 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  13 15:38:10.781 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  14 15:38:10.859 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  15 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  16 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  17 15:38:11.546 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  18 15:38:11.546 27/01/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  19 15:38:11.578 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  20 15:38:40.953 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  21 15:38:40.953 27/01/11 Sev = WARNING/2 CVPND/0xA3400019

  Fixing error socket:-21. (DRVIFACE:1234)

  22 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  23 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  24 15:38:41.156 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  25 15:38:41.171 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  26 15:39:08.031 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  27 15:39:08.046 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  28 15:39:09.093 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  29 15:39:09.312 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  30 15:39:09.312 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  31 15:39:19.937 27/01/11 Sev = WARNING/3 CVPND/0xA340000D

  The virtual card did not recognize the operating system.

  32 15:39:19.937 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  33 15:39:19.937 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  34 15:39:19.937 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  35 15:39:20.109 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  36 15:39:20.109 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  37 15:39:20.281 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  38 15:39:20.281 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  39 15:39:20.578 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  40 15:39:20.578 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  41 15:39:20.953 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  42 15:39:20.953 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  43 15:39:21.437 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  44 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  45 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  46 15:39:22.046 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  47 15:39:22.046 01/27/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  48 15:39:22.062 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  Also you need to be in 8.0 code run client Anyconnect.

  --

  Robet

• Failed to retrieve the system on a new hard drive

  Hi all

  I've owned a large Pavilion s5325UK that the last few months, threw up Smart new warnings on the disk may fail.

  Yesterday, I bit the bullet and paid for a new HDD to be brilliant.

  Copied all my user data etc. to offshore on an external drive OK.

  I got the system once before after a kidnapping missed an infection by the virus.

  Installed the new drive is a Seagate Barracuda 500 GB SATA 600 7200 RPM 16 MB 3.5 "

  The party went well past and that seems to be made of conservation treatment unit to restart.

  Windows cannot be installed on this material,

  Then it's a series loop of reboots everything ending in the same error.

  The old drive is a Western Digital Caviar Blue of the same size.

  The problem with the new hard drive.  I dropped on a XP Pro image and mounted the drive to an old pc from redundant and it starts very well even if I do not mind that install drivers etc chip that was only to check the disc.

  I'm a bit confused now as I have now tried the recovery process 3 right now with the same error at the end of each attempt.

  Any suggestions are most welcome, thank you

  Hello:

  Make your own Windows 7 If installation media you can read all 25 characters of the product key of MS Windows 7.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Cannot install add-ons in Firefox 4 "[Add on] could not be installed because Firefox failed to modify the necessary.".

  I tried to install add-ons for Firefox 4, but were unsuccessful.

  If I try to install inside the about: addons, the add-on will download, but then the installation bar will not change.
  If I try to install from addons.mozilla.org, the add-on download but then I get a message in the info box on site (at the side of the address bar) which reads, "[module] could not be installed because Firefox failed to modify the necessary."

  If I try to install any other modules after that, I get an error.

  I'm under Ubuntu 10.10 on a Toshiba Satellite U400.

  On config variables xpi: enabled = true.

  I'm having this problem. I am also under Ubuntu 10.10 and Firefox 4.0 (Canonical version 1.0) 32-bit.
  When I try to install the Greasemonkey addon (and other addons), it downloads, but the installation progress bar remains at 0%. I can not also cancel installation. If I try, I get the error:

  Error: Cannot cancel install of https://addons.mozilla.org/firefox/downloads/latest/748/addon-748-latest.xpi?src=addondetail of that State (5)
  Source file: resource://gre/modules/XPIProvider.jsm
  Line: 5168

  When you try to install, I get this error in the error console:

  Error: this.installLocation is not defined
  Source file: resource://gre/modules/XPIProvider.jsm
  Line: 5751

  I read on the troubleshooting page of Firefox that xpinstall.enabled should be set to true in the configuration: about, but there is not in my list of config, so I tried to add it, but it made no difference.

• Satellite L650D Webcam driver open fail. Restart the computer or the camera

  Hello, I did a clean install of windows 7 x64bit installed the driver for the webcam, but I can not use my camera I have Webcam driver open fail. Restart the unit photo or computer... can someone help me?

  Hello

  I think the problem is the new facility
  You must install the VAP (value added package) first more I recommend to choose the latest version of the driver/software webcam
  In the driver Satellite L770D download area you can find the Webcam driver v 2.0.0.21 for Win7 64 bit

• Compilation failed due to an error of Xilinx.

  I've recently updated since LV2014 until 2015, and an FPGA VI who previously compiled successfully is no longer made. My goal is a 7951R and I use a module e/s of 6584. A few minutes in the compilation process, I get the below error. I found the White Book of OR describing this problem for 2010 and provide a patch, but this solution has failed for me. Curiously, I can succeed in the compilation of FPGAS screws very simple, but not more complex that were previously viable.

  LabVIEW FPGA: Compilation failed due to an error of Xilinx.

  Details:
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd" line 55: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\arrayLpIndx_593.vhd", line 22. array_in is declared here
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd", line 24: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd ignored errors
  -->

  Total memory use is 239156 kilobytes

  Number of errors: 2 (filtered 0)
  Number of warnings: 11 (filtered 0)
  Number of news: 0 (0 filtered)

  "Synthesize - XST" process failed

  Compile time
  ---------------------------
  Introduction date: 04/12/2015-16:36
  Date recovered results: 04/12/2015-16:38
  Waiting time in the queue: 00:09
  Compilation of time: 01:44
  -Generate a Xilinx IP: 00:00
  -Estimate of the resources - PlanAhead: 00:33
  -Summarize - XST: 00:56

  Okay, that was weird.

  I discovered there was a small change between revisions. I had wrong initalized a table by exchanging the entries, so that the size of the array is 0 instead of n. normally, this should be taken at the beginning of the compilation, but this table null was used to initialize a shift register in a while loop and the exit from the while loop enters a loop, where my FIFOs operate. While the loop/shift register seems to be the essential element to the compilation of progress as he did and present it as a mistake of Xilinx. If you delete the while loop then the error is detected quickly and correctly identified.