VMotion compatibility between Opteron 6100 (Magny Cours) and Opteron 6200 (Interlagos)

Similar Questions

• Error: Having the problem of compatibility between this version of Windows and think soft. I am running Windows Vista

  Hello

  I GET A PROBLEM ON VISTA:

  «This problem was caused by a compatibility issue between this version of Windows and.»

  This product is generally distributed by the company that manufactured your device or computer. »

  I CAN'T FIND A SOLUTION OR AN UPDATE FOR THIS SOFTWARE DISTRIBUTED BY HP FOR LAPTOP.

  I ALREADY GET SUPPORT TECHNIQUE ON THE HP WEB SITE BUT NO SOLUTION...

  CAN I GET ANY HELP?

  THANKS IN ADVANCE.

  Hi Luis,.

  You see the 6TO4 card in Device Manager? (right click on computer, properties, Device Manager)

  We will disable this.  This is for IPV6 to IPV4 translations and not in wide use at the moment.

  In Device Manager, right-click on the Microsoft 6TO4 device and choose Uninstall.

  Now, we will turn off the connection of the difficulties:

  • Click on Start, then network.
  • Click network and sharing Center , near the top.
  • Click manage network connections on the left.
  • Right-click on the network connection that has problems, and then choose Properties.
  • Clear the Internet Protocol Version 6 (TCP/IPv6) check box, and then click OK.
  • Now, click on Start and type cmd and press to enter.
  • At the command prompt, type netsh in 6to4 set state disable and press to enter.

  
  Stop and restart your computer.

  I found a good thread on this course on Technet that may be useful:
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3c7de6f8-AFB7-4d90-8D1F-5e170520432e/#page:1

  Hope that helps.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• vMotion compatibility Intel CPU

  Hi all

  I'm making reference to this document: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1991

  Requirements of VMotion CPU compatibility for Intel processors

  We have four servers BL460c G1 (Xeon 54xx CPU). I want to buy two new servers to replace 2 we have in an offbeat upgrade. The new servers are BL460c G7 (Xeon 56xx CPU).

  In the above document, our current processor is part of Group C. Our new servers fit into Group E. There are instructions of compatibility vmotion for vMotioning fast between the groups C - D and D-e... but I need to know if I can vMotion the c.-e. group. Is this possible, or what I can not vmotion?

  Thanks for your help!

  The VMware Compatibility Guide for your research material and click on the CPU model. This will open a web page that shows all modes of EVC supported CPU.

  André

• vMotion works between HP DL380 G7 and the Gen9

  Hi all

  VMotion I would like to know how working with HP DL380 G7 HP DL380 Gen9?

  Can someone help me?

  vMotion between this two servers:

  HP DL380 G7:

  Intel Xeon E5649

  Embedded NIC 4x1GbE

  + NC364T PCI Express Gigabit QuadPort

  HP DL380 Gen9:

  Intel Xeon E5-2650v3

  Embedded NIC 4x1GbE

  + 10 GB 2-port 10GBASE-T 533FLR-t HP FlexFabric

  Can someone help me?

  I would be very grateful
  

  Ralf
  

  The G7 has a CPU of generation Westmere, the Gen9 has a generation of Haswell CPU.

  vMotion requires that you have the same subset of games of CPU instructions and common on the source and destination of the CPU and active features in the server BIOS.

  This means that in your case:

  You will be able to vMotion virtual machine that has been powered on the host of the G7 (VM runs with Westmere instructions) for the Gen9 and so (but only if you don't re - power cycled the VM on the host G9).

  But you will not be able to vMotion virtual machine that has been powered - we on the Gen9 host (VM runs with Haswell instructions) to the host of the G7 most old car is missing these more recent CPU instruction sets.

  VCA comes here. By activating EVC on the common cluster with the generation of CPU down (in your case Westmere), all guests will present only these instruction sets to virtual machines when they are powered - on, which makes possible dynamic migration through the different physical CPU generations.

  See the following articles for more information about CVS:

  VMware KB: Enhanced vMotion compatibility (EVC) support processor

  VMware KB: EVC and CPU compatibility FAQ

  Alternatively you could manually hide CPU instructions by VM - with advanced options if you don't have a source host and destination in the same cluster, but it is a tedious task and I would not recommend it.

• VCA and VMotion compatibility

  I am looking for a few new ESX boxes to expand our data center of VSphere 4 current U1.

  Ideally, I would buy Intel E7540 series servers because they can FT and adapt the specifications I need.

  I currently have a mix of X 5355 and E7330 ESX boxes.

  DELL sales tell me that E7540 processors are not compatible with the existing X 5355 vmotion and processors E7330 (even with active CVS).

  VCA and flexmigration enable me to vmotion (hot) between theses processors and processor E7540? I have the impression that the seller DELL is perhaps wrong as I thought VCA and flexmigration should mitigate the differences between these processors (obviously within reason)? Surely at least between the E7330 and the E7540?

  I had a look to many documents, including the KB Article: 1003212 but still trying to find a definitive answer?

  Forget DELL sales. They should be compatible under VCA VMotion (VCA's enhanced VMotion compatibility). But they are obviously not compatible FT.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• compatibility between 23 "cinema aluminum and mac pro 4.1 2009 2.66

  Is there compatibility between 23 "cinema and Mac Pro 4.1 aluminium 2009 2.66 Ghz quad.

  If you mean an A1082 model, while the model has a DVI input and connect it to the DIP port on the graphics card.

  If you have the old A8536 model that the model has an ADC connector and you need a mini displayport > converter ADC as

  http://www.Amazon.com/Dr-Bott-DVIator-us-110V/DP/B000NSGIQO/ref=sr_sp-btf_title _ 1_6/179-1314294-8358010? ie = UTF8 & qid = 1402...

  http://www.Amazon.com/Apple-DVI-ADC-display-adapter/DP/B00011KHT2/ref=sr_sp-ATF _ title_1_1/179-1314294-8358010? ie = UTF8 & qid = 1402766343 & sr = 8-1 & keywords = dvi + to + CDA + display + adapter

  Note that some links may not work because of a temporary problem with this forum

• Satellite C660 - compatibility between motherboard and hard drive internal

  Hi, I have a problem with the compatibility between the internal (1 terabyte) hard drive and installing windows 7 pro.
  I broke my old internal hard drive (320 GB) and I bought the new hd (1 tb), but during the installation it says that w7 cannot be installed on this new hard drive.

  Can my pc motherboard (serial number: 3B071014k) support the new hard drive (serial number: wd10jpvx)?
  and if the answer is 'yes', how can I make it work?

  First of all the question has nothing to do with the motherboard and HARD drive compatibility.
  If the HARD drive is visible in the BIOS (first page), the HARD drive is supported by the BIOS and HARD disk controller.
  In the case where the drive HARD isn't recognized, you will need to replace this HARD drive with another. I guess the smaller size of the 2.5 SATA HDD THAT would be taken in charge (500 GB)

  However, in case the HARD disk is visible in the BIOS, you should be able to install Windows 7.
  Before starting the installation, you must format the HARD drive and should create the system partition.
  For this procedure, I recommend to use some tools such as partitions for example: GParted
  GParted is a freeware Linux tool.
  You can create a bootable USB key in order to start the device using GParted:
  http://gparted.sourceforge.NET/LiveCD.php

  Then, you should be able to format the HARD disk and create partitions.

• Why is the compatibility between interactive pdf and acrobat dc so bad?

  We used Indesign CC14 make interactive pdf with a lot of hyperlinks on the huge books. With the new Indesign CC15, all target links are wrong, the interactive pdf is ok on a desktop computer, but failed on Ipad and Iphone. There is no compatibility between adobe acrobat and adobe acrobat reader DC.

  Before an another upgrade to Indesign CC I want questions to be resolved on.

  Here's the reality: PDF readers on mobile, including those from Adobe, have limited support for interactive PDF.

  This is not new: I wrote about this for years and the situation has not changed:

  For the interactive PDFS, not all readers are equal. InDesignSecrets

  There are readers who support it, but you may have to pay for them. Try PDF Expert of Readdle (US $9.99).

  It has nothing to do in particular with the latest version of Acrobat DC. It is one of the many readers on iPad, iPhone and Android that do not support interactive PDF features. Some features will not work, some will not.

  That's why many of us are moving the fixed layout EPUB when we want to view interactivity or animation.

• Compatibility between the cloud and non-nuage versions

  I'm sure that there will be no problem of compatibility between the same versions of cloud and non-cloud products. But what about the feature updates that are mentioned as an advantage of cloud products. How they affect the file format. It does not depend on whether or not I use a feature of some? These updates will be only to provide features that do not change the file format? For example: if I have version 6.0 non-cloud InDesign on one computer and 6. ? InDesign clouds with a new feature that it did not in the non-cloud version yet, can I save a file with the version of cloud and open it with the no-cloud version?

  Hi Mosaicpress,

  Files saved from creative Cloud of products versions are compatible with "framed" copies of the same program. Creative specific characteristic cloud updates will not affect the file format.

  -Dave

• Compatibility of files between MAC 5.5 CS and CS 5.5 PC?

  We are a store based on PC with some MAC here and there thrown.  Asked me to check the compatibility of files between MAC 5.5 CS and CS 5.5 PC.  The files are compatible?  either the user on a PC can create a document photoshop/illustrator/etc which is then opened by user B on a MAC without problems?

  Thank you!

  Yes. For programs, you said it has been the case for always and even for programs such as Premiere Pro, or again, which were specific to the platform until recently, is more a problem for CS5. Of course, you will always have to take care of different manipulations for the paths of files on different platforms for files related to the outside, but it is a different matter and nothing specific to Adobe...

  Mylenium

• The processors for vMotion compatibility

  We have just upgraded to vSphere Essentials 6, Plus so we can take advantage of vMotion. We have built an almost exact replica of our existing Dell PowerEdge T420 server, so that we can have a high availability for virtual machines, they move from one physical server to another, depending on the needs. Looking through the documentation of DRS cluster, it is said that the processors 'must come from the same class of supplier (Intel and AMD) with the same family of compatible processor for migration with vMotion. . "(vSphere 5.5 Documentation Centre()'

  Our current server has a processor of v2 Intel Xeon E5-2440 (8 cores, 20 MB of cache, 1.9 GHz). The seller we buy our new generation of server of door the same CPU model number (Intel Xeon E5-2440), but with 6 cores, 15 MB of cache, 2. 4 GHz. They have to special order the exact same processor, we currently have. We will encounter any problems if the rest of the hardware is the same, but the processors are slightly different? Same supplier, same family, same model number – only with fewer cores, less cache, more GHz. Is that what I should consider before moving?

  Thank you!

  Ben

  Your processors are of different generations, the E5-2440 is a Sandy Bridge and the E5-2440 v2 is an Ivy Bridge, take a look here: http://ark.intel.com/compare/64612, 75263

  And since they are from a different generation, you need to activate CVS in your cluster to the power of the machine virtual vMotion between these hosts, have a look here for more information on the CVS: KB VMware: best vMotion compatibility (EVC) processor support

• Quick vMotioning problem between two servers HP BL460c Gen 9 when EVC enabled

  I have two HP BL460c Gen 9 blades configured exactly the same thing with 2 x Intel XEON E5-2660 v3 processors in each of them. Both running the same version ROM (I36 06/05/2015) and running the same version of ESXi (5.0.0 build 2509828). They are managed by a Server Build 2656067 vCenter 5.0.0.

  When I configure these two servers in a cluster with EVC disabled I am able to vMotion between them. However, if I activate the Intel EVC modes so I am unable to vMotion between these two identical servers.  Here is an example of the message that I get when I updated Westmere VCA mode

  Host CPU is not compatible with the requirements of the virtual machine to CPUID level 0 x 1 'ecx' register

  Bits of the host: 0000:0010:1001:1000:0010:0010:0000:0011

  Required: x 110: x01x:11 x 1: 1xx0:xx11:xx1x:xxxx:xx11

  Inconsistency detected for these features:

  * General incompatibilities

  If I disable CVS, then I can vMotion VMs between them.

  I wanted to add these hosts to an existing cluster configured with EVC Westmere mode so that I was able to vMotion between old and new guests, but was unable to vMotion VMs off the new hosts, even if I tried to vMotion to another new host.

  Configure a new cluster with only these two new hosts to so I could experiment. I can only vMotion between them if CVS is disabled. I cannot further increase the VCA mode on this new cluster, for example of Westmere to Sandy Bridge then I have virtual machines under tension within the cluster. For example: I put the VCA mode at Westmere, feeding on a virtual computer, when I go to change the CVS to Sandy Bridge mode I get the following message, I should be able to increase the VCA mode but may not lower it

  The cluster cannot be configured with the selected Enhanced vMotion

  Compatibility mode; The CPU features disabled by this mode may be currently in use

  by slot voltage or suspension of the virtual machines in the cluster.

  I get this message even if I try to set the VCA mode at the same level, that it is already.

  Anyone got any ideas on how to solve this problem?

  Hello

  Seems, your CPU supports 5.0 ESXi and vCenter 5.0, you must upgrade your vSphere vSphere 6.x for the VCA.

  See the links below and also compatibility VCA matrix attached:

  VMware KB: Enhanced vMotion compatibility (EVC) support processor

  Intel CPU VCA Matrix (Enhanced VMware vMotion compatibility) | Virten.NET

  

• FT/HA/vMotion compatibility

  Hello

  I hope that the forum does not mind this strange issue. I tried to continue my learning of vSphere and ESXI installed on a white box with i7-2600 machine, on the Intel H67 chipset. Everything works

  I would now like to add a second esxi host, practice FT/HA/Vmotion. I intend to stick with the i7-2600 for the processor, but my question is, the motherboard chipset should it be the same? I have to stay with a motherboard that is H67?

  Thank you.

  -MN

  Hello

  Shorat response is "no, it doesn't have to be the same.

  Slightly longer answer is:

  For HA, it shouldn't make any difference if it's the same or not (mother or processor card). For FT, and vMotion processor count.

  Although FT and vMotion are apparently completely different one from the other, FT is possible with vMotion, so, the first thing to do is to understand the vMotion compatibility.

  The "only thing" vMotion to be is (apart from a shared storage, network connectivity, etc.) East of compatible processors between them. You can have a look on this

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1003212

  and this

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1991

  As you will see, processor questions and where you do not have the same processor, then you should play a little with VCA.

  This is a compatibility table for EVC and the mask, you need to use in case you want to use two different processors

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1003212

  And in case you want to learn a little more about all these (basic knowledge), you can take a look in this doc.

  http://www.VMware.com/files/PDF/vmotion_info_guide.PDF

  I hope this has helped you!

  Concerning

  SEB

• vMotion compatibility

  If I have two servers from different manufacturers in the same cluster DRS (Dell and HP), but both with Intel E5600 processors, are there problems with vmotion compatibility?

  See what VMware says:

  Sometimes, the suppliers of processors introduced changes important architects in the same processor family (for example, 64-bit and SSE3 extensions). VMware identifies these exceptions, if it cannot guarantee a successful with vMotion migration.

  Source: the CPU compatibility requirements

  How should I treat the Intel Xeon E3 and E5 processors or Intel Xeon X-series, series E, series L processors have different review or the series of numbers (e.g., v2, v3, v4, or x 5680, x 5687, x 5690)

  When you activate CVS for a cluster with Intel of E3 Xeon or Xeon E5 family processors that have different revision numbers (v2, v3, v4), a CVS base is necessary. This is due to new instruction sets is available in different revisions.  Although the processors will be the basis of CVS, it is mandatory for all processors have the same sets of instructions to virtual machines.

  As for the process of Xeon with different revisions, when you turn on VCA for a cluster with Intel Xeon processors even family (for example, E56xx, X56xx, L56xx), a CVS base is necessary. This is due to new instruction sets is available in different revisions.  Although the processors will be the basis of CVS, it is mandatory for all processors have the same sets of instructions to virtual machines.

  Source: VMware KB: FAQ EVC and CPU compatibility

• The host cannot be admitted to the current cluster Enhanced vMotion compatibility mode.

  Hello everyone

  Here's the situation...

  I have:

  vSphere 5.1 Cluster with two 5.1 ESXi hosts and configuration VSA.

  vCenter Server running on a virtual Windows Server 2012 machine.

  Task: Transfer virtual vCenter to a physical machine.

  I have install the physical machine with Windows server 2012.

  Installed vCenter 5.5 (hosts Newer then the ESXi 5.1)

  VSA installed Manager (VSA Cluster 5.5)

  When go to VSA Manager I am introduced to the following screen...

  

  Recover DOES NOT work!

  Full move operation DOES NOT work!

  It recognizes the Cluster AUV-> check availability (is online and OK)-> begins to create the Cluster VSA and it fails with the following error...

  Move the cluster host

  VSA HA Cluster

  The host cannot be admitted to the current cluster Enhanced vMotion compatibility mode. Under voltage or suspension of the virtual machines on the host can use the CPU features hidden by this mode.

  Could someone please help?

  Thanks to you all! This problem has been SOLVED as follows...

  • VCenter Server go to--> "C:\Program Files\VMware\Infrastructure\tomcat\webapps\VSAManager\WEB-INF\classes".
  • Open the file "dev.properties" with Notepad
  • Change the line that says "evc.config.baseline = lowest" to 'highest = evc.config.baseline' and save the file.
  • Perform the SERVICES. MSC and reboot 'VMware VirtualCenter Management Webservices'

  After that it of back in the VSA Manager and run it again 'Cluster of VSA recover'!

  Now, the wizard should be able to add hosts to the inventory, create the HA Cluster and add hosts to the HA cluster and configure Cluster HA.

  Done everything! :-)