VMWare consultants gave the number of the wrong track and it starts 17!
Hello
Can someone help me?
I asked to register for this course after talking with one of your advisors for about 45 minutes on the phone. I needed this VPC 5.0 certification course and I just discovered that the course that gave this Advisor was NOT required for this certification course. I need the VMware 5.0: install, manage, and configure. NO VMWare View 5.0: install, manage, and configure. I am aware that the required course is $ 500 more and would like to change the registration for the course online from April 30, 2012 - may 4, 2012 and will make payment arrangements immediately. My organization does not yet use VMware view and my needs were explained to counsel on appeal. It is only by a colleague, pointing to this point that I noticed the difference in name.
Course has been changed successfully, thank you VM :)
If you have talked to someone already why not just call back and tell them your problem.
Oh, and it's vsphere: install configure manage you need to attend.
Tags: VMware
Similar Questions
-
My incoming mail has the wrong date and time on this subject. How can I fix it?
incoming mail has the wrong date and time when they arrive in my Inbox.
The timestamp on an e-mail comes from two places, time on the mail server settings and the settings of the time on your PC. This time setting includes the current time, the time zone and setting time summer time. If one of them is off, the timestamp will be wrong. You can check on your PC, but not those on the mail server.
HAL
--
HAL Hostetler, TCE
Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
www.kvoa.com--KVOA TV, Tucson, AZ.
Concert at the Hot Licks - www.badnewsbluesband.com -
Press the wrong button and now I'm in hidden mode - no screen
I hit the wrong button and now I'm in hidden mode. The monitor will not remain and all is to be narrorated for me.
How can I fix without going through a screen? Help!
Hello
1. what happens when you restart the computer?
Step 1:
Try restarting your computer in safe mode and check if the problem persists.
If it works fine in safe mode try performing a clean boot in order to find the cause root.
Step 2:
See the article about how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: when the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
-
Hello. I received the wrong product and need a refund. How should I proceed?
Hello. I received the wrong product and need a refund. How should I proceed?
its been 10 days
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html
-or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
-
I ordered the wrong software and need to cancel the export Adobe, I can't use this product. Please give me the contact to cancel.
Cancel your subscription or membership. Acrobat, services Cloud of Document PDF
-
I disabled the automatic updates and it starts to turn itself on, W H Y?
"WINDOWS XP HOME SP2 '!
I have disabled the automatic update and it starts itself to spin, WHY?
HOW DO I KILL IT?
I want all the crud that microsoft that will come to me.
Hi Gail,
You run the computer as an administrator?
Method 1: You can run the fixit available in the article below from the off-ramp of Windows Update and then check if it makes a difference
How to configure and use automatic updates in Windows
http://support.Microsoft.com/kb/306525
Method 2: You can see the steps outlined in the article below
How do I turn off the Windows Update feature in Windows XP
http://support.Microsoft.com/kb/892894
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
How to back up and restore the registry in WindowsNote: It is not recommended to disable Windows Update, automatic update, you do not have to search for updates online or worry that critical fixes for Windows might be missing from your computer. Windows automatically checks for updates for your computer.
-
Map Module: How the "Next Track" and "Previous track" used?
I shoot with multiple cameras with a parallel tracklog in a Garmin GPS unit and think that this feature can be useful, but there never seems to be enabled. How and when it is activated? It would be nice to have an easy way to scroll the ratings the way I imported without having to pick them through the most recent or the file system.
Thank you!
As far as I KNOW, the "Previous track" functions and "Next Track" allow you to scroll through all the separate tracks within a single tracklog.
I think that the terminology can be kind of confusing. There is 'tracklogs", which are the GPX or KML files. Then there's "leads," which are the individual legs of data stored in the tracklogs. I think that most people probably just record a track by tracklog, but hypothetically, you can record several tracks in a single tracklog.
So, let's say you are on a shoot outside and you record your GPS tracks. You thousand hiking, stop the track and then start a new track in the same tracklog. This would give to ultiamtely you a single 'tracklog' file which contains two separate "tracks". In this case, orders of "Next Track" and the "track" would let you switch between the two separate tracks in the tracklog.
In short, my impression is that the "previous track" / "Next Track" only functions to navigate between multiple tracks in a single tracklog. They don't allow you to scroll your tracklogs.
I remember messages for a long time on this issue. People are wondering why the "previous track" / "Next Track" commandments were grayed out and wondering if it was a bug. I don't know if they just misinterpreted these commands as switch between tracklogs instead of titles, or if the duties were actually not work correctly with tracklogs that had several tracks.
-
Repair shop wiped the hard drive and gave the wrong version of XP
I have an Acer Aspire one model ZG5, which came with XP home. While still under warranty, the pad has stopped working and would then start is more upward. I sent it in for repair, they wiped the hard drive and fixed my problems. Except, instead of reinstalling XP Home Edition, XP Professional installed. I can't use my computer without first professional activator, which I just can't do it, and I don't have a version of the House that I can install myself. I wouldn't rather to pirate a copy, but I'm not sure how to get a copy of the House, I already bought once and do not feel that I should buy it a second time. How could I go solve this?
Back to whom you have sent your computer for repair and request that they make good (on) copy of Windows back or give you a license key valid for the version that they installed.
-
I tried to register, but gave the wrong e-mail address.
I missed a digit. As a result, at the start of my Mac, I get a notification asking me to verify my email address. Of course I can't because it's incorrect. How can I remove this notification please? Thank you.
Hello
Please follow the steps below:
- Click on the wheel in the upper right of this window and select "EXIT."
- Force quit Adobe all processes in the activity monitor (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)
- Right-click on the icon in the Finder and select the 'Go - To' folder option.
- You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")
~/Library (It will open the folder of the user's library.)
- Then go to the Application Support > Adobe > trash folder OOBE and AAM updatefile of r so
- Launch the desktop app creative cloud and select sign
Let us know if that helps.
Kind regards
Bani
-
Any help for my dumbass would be appreciated. Laughing out loud
Hi davidlangston,
What version of Windows you are running on the computer?
Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
Difficulty of broken desktop shortcuts and common system maintenance tasksNote: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.
Method 2: Run the fixit available in the article below to fix the problem automatically
When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
http://support.Microsoft.com/kb/950505
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
How to back up and restore the registry in WindowsYou might want to know
What version of the operating system Windows am I running?
http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running -
My e260 is having a bad day. I don't know if he's upset because I had a view or what, but this is the problem. There is a bad track on the e260. So I went to plug it into the computer to delete the file. However it is now frozen on the screen "bad track" does not stop and you will not connect to the computer. So how to force a reformat or fix it from here?
Currently, he is in mtp mode as I let someone borrow it and they rocked it.
Thnx for any help
Riley
You should be able to stop by pressing and holding the power button for 15-20 seconds. Just keep holding it. It stops eventually.
If you have a v2, you can force the MSC mode by sliding the HOLD switch on top towards the socket for headphones (orange list), and then pressing on & holding the REW |< button="" while="" at="" the="" same="" time="" plugging="" the="" cable="" into="" the="" bottom="" of="">
Now you should be able to run ChkDsk on it to find and correct the wrong files. Which ' be sure to slide the HOLD switch when finished.
#9 & #12 in the FAQ covers what interests you.
-
Type of Photoshop. Cursor in the wrong place and punctuation as well.
Since the upgrade to the latest version a few days ago, my text in photoshop behaves strangely.
Here is a screenshot showing how even if I type in English the slider appears on the left side.
Attime t the period will also appear on the wrong side of the text.
I use support Middle East. It seems that some language controls may have changed in this version.
Yes. I have English language selected as the input source.
Middle East and South Asia is the text engine.
Thanks for all the answers to this.
I've seen other discussions on this, but nothing helps: I also think that the controls are a bit different now.
According to your screenshots, Photoshop behaves exactly as it should. You have the ability to right left is enabled. Select the option from left to right instead. It's the option in the lower left corner of the paragraph Panel (it is a symbol of paragraph with an arrow pointing to the right, currently, you have the option selected, which is the symbol of paragraph with an arrow pointing to the left), just above the hyphenation option.
-
Songs are in the wrong format and will not play
Although playing a list of songs on my Windows Media Player box appeared and said: the file you are attempting to play has an extension (.mp3) that does not correspond to the file format. Playback of the file may cause unexpected behavior.
How can I change the format for the song will play?
Thank youAlthough playing a list of songs on my Windows Media Player box appeared and said: the file you are attempting to play has an extension (.mp3) that does not correspond to the file format. Playback of the file may cause unexpected behavior.
How can I change the format for the song will play?
Thank you==============================
Chances are that the file will play in any case.Or... maybe worthwhile to try to use the following
freeware to convert .wma format.Free Mp3 Wma Converter
http://www.koyotesoft.com/indexEn.html
(Mp3, Wma, Ogg, Aac, M4a, Ac3, Ape, Flac, Wav)
(FWIW if you install the converter, you can
Uncheck offerings from Yahoo and Dealio) (also... you
may want to uncheck the CD Ripper and the Easy
MP3 Cutter)
John Inzer - MS - MVP - digital media experience -
Duplex printing on letterhead on the wrong Page and backwards!
Hi all
I googled this question and it seems that many have the same problem, but none of the solutions seem to work for me!
I have a LaserJet P2055dn. In 'tray 3', I have paper with a letterhead on one side. It is in the status bar with letterhead down and towards the front edge of the printer, which works fine when I print a page.
However... When I tried to print the pages back to back, it prints pages 1 to the last page, page 2 on the first page, and the two pages are in reverse!
I realize I could exceed a flip manually the paper in the tray, but I'm evolving as to if I need to single page and pages back to back.
I made sure the latest driver has been downloaded and installed, and I tried to change the following settings:
Printing options > advanced > header Alternative Mode 'On '.
Paper source: plain / header / pre-printed (have tried all)
Print on both sides: Yes, Flip onIs there a way to change the settings so that I don't have to keep exchanging the paper around the status bar?
See you soon
Glenn
With many printers. the 'face' paper must be loaded in the trays in a way for Simplex jobs, but in a different way to work two-sided .
Some printers offer Alternative letterhead Mode (according to your comments, your printer seems to be one of them), in which case media that are declared with a Type of paper , letterhead can always be loaded in a sense (the necessary way for double-sided work).
With the work front, the printer then automatically manage switching sides (probably by adding a blank page and print front and back of each front page).
-
Switch P 52 SG500 - web interface shows the wrong model and disconnects randomly
Ladies and gentlemen!
One of our network switches is a SG500 switch 52p that recently started showing strange behavior.
It started with the problem was not more accessible via its web interface. Even if it was running perfectly well access via a web browser finished in wait times.
After resetting the factory default switch and configure its IP address access at first seemed to work but I had to know that the switch breaks out as a SG300 28 p switch on the administration Web site. In addition, random logoff occurs that send back me to the login page. Each from time to time, the model is correctly displayed after the login, but when I try to manage it I a connected again.
It still works with an older version of the firmware (1.2.xx I think) but that shouldn't cause such behavior, it should? In any case, I can't update the firmware says the switch as a different model.
Any suggestions what to do (apart from the RMA)?
Respect,
Hendryk
Hello
I'm sorry that you are having problems with the device and I'll try to give you the best possible advice in the circumstances.
The first thing that comes to mind is that you connect to another device, the thought is the SG500. I did the experiment several times before, so I have a few suggestions to ensure we are connection to the device:
1 - Download the Cisco FINDIT and scan tool you rnetwork, maybe you will find that you have two devices, the SG300 and the SG500. Here is the link:
https://software.Cisco.com/download/release.html?mdfid=282833583&flowid=...
2 - go to the switch that you believe to be the SG500, then go to Administration, and then discovered - CDP, and then click CDP neighbor information. Most likely, you will see that you have several switches, including the SG500.
3. If you have followed suggestions and you still believe, you go to the right switch then call at the 866-606-1866 (of the United States) and we will be happy to help you control the device and replace it if this is the case.
I really think that the first 2 suggestions will help you realize that you have two switches on your network.
Please let us know what you find.
Maybe you are looking for
-
Hello world I have a new backup disk (a disk of 5 TB of Seagate) and could use help setting up with CCC. I did in the past without problem, but I want to assure you of a few things: This particular drive has software available in a folder on the disk
-
Satellite M40 - cannot boot from the recovery cd after format HARD drive
Hello After my Satellite M40 - 133 being affected by the virus of security internet I had to wipe my hard drive. The virus wouldn't let me do anything, boot without failure or system restore. I wiped the disk and it still wouldn't load up. That's why
-
Epson Stylus CX3700 all-in - One Printer - using Google Crome
I am trying to install the driver for Epson Stylus CX 3700 All in One Printer, but some files seemed attached to Internet Explorer. I use only Google Chrome. How to solve this problem?
-
Another key feature missing? Phone application remembers that output to use.
Everyone knows this? I'll have a fine conversation by using my bluetooth headset, hang up and close the phone app. Later, I receive a call, but when I pick up, it is not routed to my helmet! I have to click on the phone application and tell it to go
-
Functions of pipeline in Oracle 11 g reports
Anyone know if you can use a pipeline function in the model of report of 11g data? For example:SELECT sysdata_setinterface_seqnosubpost_keygl_cmp_keyTABLE (rfi.gl_apex_extract_pkg.create_erp_detail_func (p_user_id = >: P_USER_ID))p_id_fm = > 1p_id_t