VMWare Server 2: Can't see the Local network

Similar Questions

• I can connect to the local network, but not to the internet

  Why in an internet connection, I can connect to the Local network, but not to the Internet.
  I have valid IP address and configuration is good.

  I recommend you read some threads here in the forum about similar issues.
  If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
  Using the WiFi network, you must check if the common WLan parameters are favourable;
  Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

  Good bye

• Can connect to the IPSec VPN, but can not see the internal network

  I have several users that can connect to our rooms of ussing IPSec VPN on a 5505. I have a user who can connect, but cannot see the internal network. This user is using DSL with a speedstream 4100. However, I have another user with the same configuration that can connect and see the internal network. Newspapers in ASDM show the link, but do not seem to show any errors trying to access internal. Any help will be greatly appreciated. Thank you, Bill.

  Add...

  ISAKMP nat-traversal crypto

• Strangest thing: iPhones can't see the wireless network. Why not?

  Suddenly, an iPhone 5 and an iPhone 6 were not connected to the home network. I thought that the wireless router was to have a hiccup. Reset it and still no. Control a connected computer and internet. Thought that it was a wireless problem, but check the settings (I don't mess with) and they are fine. BUT, I realized my iPad is always connected to the network. IPhones don't even see the wireless network. SSID always broadcast on. I tried to enter the SSID and password manually, but iPhones say that the network does not exist. It's the strangest thing. What would make the invisible network for phones all of a sudden? Both phones are differnet OS running. One is the latest version, probably the previous version. It's a FiOS Actiontec router/router wireless. Everyone has heard of such a thing? I do not understand how it is possible...

  Try this on an iPhone. No matter which even with other iOS.

  Tap settings > general > reset > reset network settings

  You will need to enter the password for Wi - Fi.

• How can I see the security network key / password for my wireless network (all I see is points and the characters of the show option does not work)

  I'm trying to find out what is the password for my internet connection.  I can see the properties of the network and the password appears as a series of points.  the "Show characters" checkbox does not work... is there anyway I can find what is the password?

  Hello

  If you don't remember the password registered for you wireless, you can always reset your router to the factory default settings.
  Unfortunately, we cannot help you recover files and features that are lost or forgotten passwords.
  For more information about the lost passwords, please see the following Knowledge Base Article:
  http://support.Microsoft.com/kb/189126

• Can not see the plan network and Control Panel

  Windows 7 64 bit, I can't show my control panel.  The window does not load.  First of all, I had trouble with page load network and Internet.  Now it crashes when I try to open it.  My most recent change was the installation of a new firewall.  I just wanted to see if I should add anything whatsoever to the title of the secure networks.

  I can now display the network map.  After the installation of the station, I stopped and restarted.  The system should have distinguished between that and a reboot.  Thank you.

• Can't see the computer network

  I have two computers running Windows 7 Home Premium 64 bit on my home network. In Windows Explorer under network, n ° 1 sees itself and n ° 2, but no. 2 can't see himself, i.e. cannot see no. 1.  Both can access the internet. The printer is connected to the N1 by USB (we had a lot of trouble at first with Wi - Fi so use cable for this).

  There is no RESIDENTIAL group because I understand there are IPv6 and our router does not support that. I tried the homegroup, but no. 2 could not yet see no. 1. We operate a wireless G network.

  On the computers on that network discovery is and file sharing and printer are on. Protected by password sharing is disabled.

  I saw some comments which may help to a registry cleaning. Could this be true?

  What Miss me? It left me speechless.

  Thanks for your help.
  G

  It's fixed!

  I found another thread in that says something about the zone of confidence in their firewall. I went and looked and BINGO! The name of the area was very different in the name of the wireless network. Now it's the same thing and I have reset certain actions and we are connected.

  Yay! I thank very you much for all your hard work with this in mind.

  Moreover, there is no element of network connections in the control panel in computers. Is that how it should be?

  Graham

• Sat Pro M30: Can't see the wireless network.

  In my work, we have the wireless network. When I search the network I don't see. the wireless signal is strong.my laptop Satellite Pro M30's.

  Could you please have the solution or know what the problem is.

  Hello

  Have you used the Atheros WLan or Intel WLan card?
  As far as I know if you unit has an Atheros WLan card you should always use the Atheros Client Utility to connect to some networks.
  In this case, the option use Windows to configure my wireless network must be disabled. If you the Intel card this option must be checked.

  Please visit this site and points.
  http://www.laptop.uwaterloo.ca/help/users_wireless_troubleshoot_list.html

  Good luck

  Good bye

• Connected to the local network, but can not use internet

  I recently had problems with access to the internet after reinstalling windows 7. Before the reinstall worked very well.

  I can connect to the local network without problem, and it shows that the internet is connected. Yet I can not access the internet. When I disconnect and reconnect, I get a few seconds of internet work before it stops working.

  When a diagnosis in the network and sharing Center, I get the error "default gateway is not available" and occasionally "the connection between your access point, etc. and internet is broken"

  Other computers and devices using the network are working properly, although there was a 'competitor IP address' error on another pc, which, after a reconnection, solved itself.

  I use an edimax 802.11n wireless card and a D-link router

  I tried several things to make it work again, but without result. Any help would be greatly appreciated

  disable TCP/IPv6 had no effect.

  I think I can have fixed me, I installed the driver microsoft before the reinstall instead of the driver edimax and internet suddenly started working.

  Thanks for the help of yor

• ASA 5505 IPSEC VPN connected but cannot access the local network

  ASA: 8.2.5

  ASDM: 6.4.5

  LAN: 10.1.0.0/22

  Pool VPN: 172.16.10.0/24

  Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.

  I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.

  Here is my setup, wrong set up anything?

  ASA Version 8.2 (5)

  !

  hostname asatest

  domain XXX.com

  activate 8Fw1QFqthX2n4uD3 encrypted password

  g9NiG6oUPjkYrHNt encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 10.1.1.253 255.255.252.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  address IP XXX.XXX.XXX.XXX 255.255.255.240

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS server-group DefaultDNS

  domain vff.com

  vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0

  access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0

  pager lines 24

  Enable logging

  timestamp of the record

  logging trap warnings

  asdm of logging of information

  logging - the id of the device hostname

  host of logging inside the 10.1.1.230

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA-server protocol nt AD

  AAA-server host 10.1.1.108 AD (inside)

  NT-auth-domain controller 10.1.1.108

  Enable http server

  http 10.1.0.0 255.255.252.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 10.1.0.0 255.255.252.0 inside

  SSH timeout 20

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal group vpntest strategy

  Group vpntest policy attributes

  value of 10.1.1.108 WINS server

  Server DNS 10.1.1.108 value

  Protocol-tunnel-VPN IPSec l2tp ipsec

  disable the password-storage

  disable the IP-comp

  Re-xauth disable

  disable the PFS

  IPSec-udp disable

  IPSec-udp-port 10000

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list vpntest_splitTunnelAcl

  value by default-domain XXX.com

  disable the split-tunnel-all dns

  Dungeon-client-config backup servers

  the address value vpnpool pools

  admin WeiepwREwT66BhE9 encrypted privilege 15 password username

  username user5 encrypted password privilege 5 yIWniWfceAUz1sUb

  the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username

  tunnel-group vpntest type remote access

  tunnel-group vpntest General attributes

  address vpnpool pool

  authentication-server-group AD

  authentication-server-group (inside) AD

  Group Policy - by default-vpntest

  band-Kingdom

  vpntest group tunnel ipsec-attributes

  pre-shared-key BEKey123456

  NOCHECK Peer-id-validate

  !

  !

  privilege level 3 mode exec cmd command perfmon

  privilege level 3 mode exec cmd ping command

  mode privileged exec command cmd level 3

  logging of the privilege level 3 mode exec cmd commands

  privilege level 3 exec command failover mode cmd

  privilege level 3 mode exec command packet cmd - draw

  privilege show import at the level 5 exec mode command

  privilege level 5 see fashion exec running-config command

  order of privilege show level 3 exec mode reload

  privilege level 3 exec mode control fashion show

  privilege see the level 3 exec firewall command mode

  privilege see the level 3 exec mode command ASP.

  processor mode privileged exec command to see the level 3

  privilege command shell see the level 3 exec mode

  privilege show level 3 exec command clock mode

  privilege exec mode level 3 dns-hosts command show

  privilege see the level 3 exec command access-list mode

  logging of orders privilege see the level 3 exec mode

  privilege, level 3 see the exec command mode vlan

  privilege show level 3 exec command ip mode

  privilege, level 3 see fashion exec command ipv6

  privilege, level 3 see the exec command failover mode

  privilege, level 3 see fashion exec command asdm

  exec mode privilege see the level 3 command arp

  command routing privilege see the level 3 exec mode

  privilege, level 3 see fashion exec command ospf

  privilege, level 3 see the exec command in aaa-server mode

  AAA mode privileged exec command to see the level 3

  privilege, level 3 see fashion exec command eigrp

  privilege see the level 3 exec mode command crypto

  privilege, level 3 see fashion exec command vpn-sessiondb

  privilege level 3 exec mode command ssh show

  privilege, level 3 see fashion exec command dhcpd

  privilege, level 3 see the vpnclient command exec mode

  privilege, level 3 see fashion exec command vpn

  privilege level see the 3 blocks from exec mode command

  privilege, level 3 see fashion exec command wccp

  privilege see the level 3 exec command mode dynamic filters

  privilege, level 3 see the exec command in webvpn mode

  privilege control module see the level 3 exec mode

  privilege, level 3 see fashion exec command uauth

  privilege see the level 3 exec command compression mode

  level 3 for the show privilege mode configure the command interface

  level 3 for the show privilege mode set clock command

  level 3 for the show privilege mode configure the access-list command

  level 3 for the show privilege mode set up the registration of the order

  level 3 for the show privilege mode configure ip command

  level 3 for the show privilege mode configure command failover

  level 5 mode see the privilege set up command asdm

  level 3 for the show privilege mode configure arp command

  level 3 for the show privilege mode configure the command routing

  level 3 for the show privilege mode configure aaa-order server

  level mode 3 privilege see the command configure aaa

  level 3 for the show privilege mode configure command crypto

  level 3 for the show privilege mode configure ssh command

  level 3 for the show privilege mode configure command dhcpd

  level 5 mode see the privilege set privilege to command

  privilege level clear 3 mode exec command dns host

  logging of the privilege clear level 3 exec mode commands

  clear level 3 arp command mode privileged exec

  AAA-server of privilege clear level 3 exec mode command

  privilege clear level 3 exec mode command crypto

  privilege clear level 3 exec command mode dynamic filters

  level 3 for the privilege cmd mode configure command failover

  clear level 3 privilege mode set the logging of command

  privilege mode clear level 3 Configure arp command

  clear level 3 privilege mode configure command crypto

  clear level 3 privilege mode configure aaa-order server

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4

  : end

  Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.

  The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.

  On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.

• Easy VPN not able to access the local network

  Hi guys,.

  little hope can help me, I'll give you a run down on the config.

  I have a border router that is a no. 2851 connected to the No. 2851 is a switch cisco 3750 running Routing inter - vlan with four VLANS.

  I have easy VPN server on the edge router No. 2851 I am able to connect remotely from a client vpn cisco with a problem but I can't access the local network on the server, I tried everything with no luck.

  I have a cisco VPN client installed on a 64-bit windows system 7 and I also tried with windows xp 32-bit system and still no luck.

  Please I need help I need to get this race to end of trading today.

  I will be copying and pasting the edge router config please if someone get review and see if the config is good.

  You need to change your ACL PAT of standard to extend and to deny traffic to be translated to the Pool of VPN:

  access-list 120 deny ip 10.10.10.0 0.0.0.3 10.10.50.0 0.0.0.255

  access-list 120 deny ip 192.168.XX.0 0.0.0.255 10.10.50.0 0.0.0.255

  access-list 120 deny ip 172.16.XX.0 0.0.0.255 10.10.50.0 0.0.0.255

  access-list 120 deny ip 172.1X.20.0 0.0.0.255 10.10.50.0 0.0.0.255

  access-list 120 deny ip 192.168.XX.0 0.0.0.255 10.10.50.0 0.0.0.255

  access-list 120 allow ip 10.10.10.0 0.0.0.3 all

  IP access-list 120 permit 192.168.XX.0 0.0.0.255 any

  IP access-list 120 permit 172.16.XX.0 0.0.0.255 aniy

  IP access-list 120 permit 172.1X.20.0 0.0.0.255 any

  IP access-list 120 permit 192.168.XX.0 0.0.0.255 any

  overload of IP nat inside source list 120 interface Dialer0

  no nat ip within the source of the list 1 overload interface Dialer0

  clear the ip nat trans *.

  Hope that helps.

• HP EX470 server - can't see the thumbnails when you manage photos on Webshare

  I use the HP EX470 home server. I am y access various machines having IE8 loaded on them.

  I can't see the thumbnails when trying to manage the photos.

  I can move them-hard if you do not see what you are on the move. I can change the caption. But I can't see the thumbnails.

  I also tried to do in the Chrome browser, but I can't even see the albums in this browser.

  Any help/suggestions would be appreciated.

  Solved...

  In IE8 under Tools, compatibility view settings, I added the local name of the web server and the problem was solved.

• OIA 11.1.1.5 - IOM 11.1.1.5 integration can not see the Provisioning Server

  Hello world
  
  I'm trying to integrate the IOM and OIA, I followed the steps that appear on http://docs.oracle.com/cd/E24179_01/ doc.1111 /e23377/integratingwithoimpreferred.htm #BABBEBFC, but when I need to create the provisioning server I do not see the Oracle provisioning server.
  
  I changed all the required files and double checked what they where saved and restarted the server OIA but no change.
  
  I have deployed OIA and IOM on the same area of WL 10.3.5, they are also on Windows Server 2003.
  
  Please I will appreciate any help you can give me.
  
  Kind regards
  Camila

  Hi Alex,

  Thanks for the reply, I forgot to update the post earlier, but I managed to solve the problem.

  When I set up the integration I did all the steps of the integration Guide including the amendment of the context.xml file - iam. It's because OIA is deployed on a Weblogic managed server, so when a change is made on all the files located in the RBACX_STAGING folder, the deployment must be updated.

  Kind regards
  Camila

• Can I delete the local data store on esx 3.5?

  I have a client with vmware ESX 3.5 no esxi

  They have a local data store but it is formatted with a block size of 1 MB, so I can put only a 256 GB VM out there and I need to put a test VM with a larger size.

  I know that in ESXi 4 you can simply delete the local data store and create a new, but I'm not familiar with ESX 3.5, are there hidden files on the data store that the server uses?  If I search for the store there's nothing in there.

  Thank you

  Mike

  Hi Mike,.

  You can simply reformat your data store. Take a look at the following article:

  • http://userssuck.com/2007/07/12/how-to-change-the-blocksize-of-a-VMFS-filesystem/

  Of course, you must back up and delete any data you have on this data store before the format operation.

  Good luck!

  Concerning

  Franck

• Response of local folders looks like the answer to the discussion group. No signature or formatting options. How can I change the local folders meets regularly?

  Please see image attached. Responses from the eyes of local folders as responses to the discussion groups. No signature or formatting options. How can I change the local folders meets regularly, as they are in the Inbox?

  I don't think that the format of replies to the messages in the local folders are linked with focus groups or to individual account settings. As local folders can contain messages between several accounts or identities, it is more likely that formatting uses the setting of the account or identity appearing in the: field when you reply.

  This is how I think it should work. How this works in practice may be different.