VMware workstation 10 has no Chinese support for linux?

Similar Questions

• VMware Workstation 6.5.2 can support AMD 4200 +'s AMD - V

  I know that Workstation 6.5.0 uses 4200 + CPU AMD - V.

  So I can't install ESX3.5 on Workstation 6.5.0.

  But what of VMware Workstation 6.5.2?

  VMware Workstation 6.5.2 can support AMD 4200 +'s AMD - V?

  I want to use ESX 3.5 on VMware Workstation.

  # 10 CPU: AMD family is required to support AMD - V in Workstation 6.5.x.

• Can not find Workstation 11 documents that specify host for Linux operating system support

  I had all the versions of the workstation since version 3 or 4, and in all cases, Workstation ran on a Linux OS support.  For now, I have both Debian and Red Hat Linux workstations and prefer to stay with Red Hat for my work of VMware Workstation. However I find no actual docs for workstation 11 who tell me what rev of Red Hat Linux is supported. Also, I don't see the real support as available contracts more. Once upon a time, you could buy support workstation. I already have systems of vSphere 5.5 to work and they have full support, but I can't support 7 x 24 production on my computer it seems. in any case, what is the actual supported Red Hat Linux tricks? 6.6 worm or am I stuck goes Red Hat 7?

  Thanks to anyone who really knows.

  response to me here:

  After a bunch of research, I get to a page that tells me to get the compatibility guide:

  VMware Workstation 11 Documentation Centre

  Who gets finally me:

  http://www.VMware.com/resources/compatibility/search.php

  Which is useless for workstation because it lists only the products of ESXi.

  Always to research... and I get this:

  http://www.VMware.com/resources/compatibility/search.php?deviceCategory=software

  Nope... It does not help... I select "Host OS" and is told to go elsewhere:

  The host operating system compatibility information has been moved to the following location:

  
  

  http://KB.VMware.com/kb/2100429

  
  

  Host operating system support information (2100429)

  Goal

  Supported host operating system data are removed from the Compatibility Guide VMware (VCG) to other articles of the basis of knowledge (KBs).
  This article KB then told me to go somewhere else to:
  VMware KB: Supported hosts for VMware Workstation operating systems

  Operating systems supported for VMware Workstation guests (2088579)

  your da!
  The answer is that 11 workstations is supported on some types of Linux and the most notable are:
  Red Hat Enterprise Linux 5.10
  Red Hat Enterprise Linux 6.5
  Red Hat Enterprise Linux 7.0 (note: 7 RHEL is horrible)
  The answer is therefore a flat NO WAY for Debian or one of its close brothers.  Strictly big business Linux here.
  Nice hide details in seventeen deep research.

• VMware discover 5 support for linux/ubuntu comments?

  Dear Sirs

  Is there an agent yet for linux especially Ubuntu 10.04 LTS.  With the Android development picking up speed, we have a real need to have our developers.  The main thing that is necessary for us is the USB redirection to the prompt of the client running XP/Windows 7 or even a thin client for them to download cores to our material connected to the customer.  Thanks in advance, if anyone knows of other solutions, it would be really appreciated.

  Are you talking about Office VDI or on the side of client to end-users.

  There is a VMware View Client for Linux, this will allow Linux machines to connect to a broker and load a Windows VDI image.

  However it is not a VMware View Agent for Linux that allow a remote desktop Linux to be negotiated through the infrastructure of the view to a device from end user customers.

  There are rumors of people for the agent Windows runs under Linux using wine and Rdesktop but no one seems to have posted a shot-by-shot full of way to account and then that would be completely supported the point of view of VMware.

• Why does not turn VMware Workstation in a less than authorized VMware Workstation OS prompt, if not supported?

  Hey

  IM wondering why isn't VMware Workstation must be installed and running (with virtual machines) on a guest operating system in VMware Workstation... I understand if it is not supported (such as it is running a virtual machine on a virtual machine that could be run on another virtual machine... you get the point), but at least allow him...

  When you try to turn on a virtual computer, we check the existence of the backdoor in a process that runs at CPL 3 and IOPL 0 VMware.  If we find the VMware backdoor, we refuse to let turn on the nested VM.  The vmx.allowNested configuration option to bypass this check.  However, if you have restricted the backdoor to the guest code that runs with IOPL > = CPL (using the option monitor_control.restrict_backdoor to the external virtual machine), then we can't find the door VMware backdoor, and we let you turn the nested in any case virtual machine.  Thus, if the external virtual machine is set up correctly, you don't need the vmx.allowNested option.

  In future versions, we can also check to see if you are running under some other hypervisor that announces its presence through pieces of CPUID feature.  If so, we will refuse to turn on the nested VM.  In this case, you will need the vmx.allowNested option to circumvent these controls.

• ScanJet 3000 Pro s2: Scanjet 3000 Pro s2 - support for linux

  Hello

  product page indicates that linux for the Scanjet 3000 Pro s2 drivers are available:

  The HP Scanjet Professional 3000 s2 to add to existing custom solutions through TWAIN, ISIS, WIA, Linux and Mac drivers.

  But the specification list only supported for Windows and Mac OS X. even for the driver download page.

  This unit works with linux? If so, what architectures are supported?

  Thank you

  Indeed, HP is the main contributor to HPLIP, but HPLIP does not all drivers for Scanjet scanners:

  

  I see in the thread that the poster has got some HP drivers by contacting through the discussion list, I suggest to try the same thing and check if you got no response, it's a forum for peer to peer and not direct contact with HP...

  You can sign up and send a mail to the sane-devel list, prescribed for such a seems to me:

  http://lists.alioth.debian.org/mailman/listinfo/sane-devel

  Hope that helps,

  Shlomi

• Extreme SSD 120GB - No. TRIM support for Linux later? $150 wasted?

  I am a customer of Sandisk's long-term and generally been happy with their products.

  My favorite and the only OS is Linux, like the millions of PC users, laptop, Tablet and smartphone world. I'm about to take delivery of a brand new Sandisk Extreme SSD 120 GB. This is my 2nd SSD (the other being of Kingston). I just found this review online (newegg.com) about current support for Sandisk Extreme SSD TRIM for Linux:

  "Cannot support a topping on LINUX. I also use EXT4 throw tag in/etc/fstab and it does not work. I sent Sandisk. They said: "I understand that you were not able to activate the TRIM on your SSD 120 GB extreme linux system command. We are sorry for the inconvenience this problem may have caused. »

  Then I remember seeing this in own of Sandisk SSD info online:

  "Any operating system can be installed on an SSD. There is NO compatibility problem with regard to the operating system. Windows, Mac, Linux, Unix any version or BACK can be installed on an SSD.
  Certain features such as the PLATE only are supported in mode native on the latest operating systems such as Windows 7 and Mac OS 10.6 and higher. »

  I'm worried. First of all, I have always use the latest version of Linux, continually updated to day and make all the necessary preparations for the maximum performance of SSD (including changes to operating and fstab AHCI). Then my other SSD worked flawless since (installed 6 months ago) news including the TRIM under Linux.

  Then I read elsewhere that Sandisk provides no SSD firmware still updates (?). Is this correct?

  If so, then Houston, we have a (major) problem. Product not suitable to use? Misrepresentation of product? Inadequate technical support? Incomplete engineering front of dumping on the market?

  I might be worrying unduly. Heck, I really hope someone can help me, clarity and TRIM unlimited direct. Can I use my new Sandisk Extreme SSD as my other player, without product development stressful of Sandisk. (Before I drop the fanboys Win7 and Mac, Linux is also valid in the real world like any OS corporate-drone. Heck one day you too could see the light...)

  Good news all around. Extreme SSD arrived and installed without a hitch. Also received a number of useful answers E-mail of Support technical Sandisk (thanks, notably, spear, who approached the plate). In short, if you have a recent Linux kernel installed, opt for the filesystem ext4 on both / and / Home. But first of all to be absolutely sure that you have selected the AHCI option in the section of the BIOS of your motherboard SATA mode. (Flashing the latest mainboard BIOS should also help.) So to allow TOPPING Linux offers edit you your file/etc/fstab to include the "noatime" instructions and "throw" in the lines making reference to / and / Home. Save and you should be good to go. So to answer my own original doubts - TRIM is supported for latest Linux OS provided that you follow the installation process. I lose $150? Probably not, but only time and toggle NAND will tell!

• Support for Linux in Smartphones blackBerry - marketing Dept.

  Sale of RIM rose by 102% to $1.88 billion for the quarter ending March 1 08. What are the chances of RIM having sufficient funds or will support, customers using Linux? A community which grew to 1.37% in September 2007 to 2.09% in October 2008.

  PS Ubuntu Linux: 8 million users and more

  It is not really answering your question to the Marketing Department, I don't even know if they read this forum. They could.

  Have you looked here for Linux support?

  http://www.BlackBerryForums.com/Linux-users-corner/

• HP 15-r022tx Notebook PC has no driver support for windows?

  I think to buy a computer laptop 15-r022tx flipkart HP and it comes with free back installed on it. But I want to install windows 7 on it and have the drive to it. But I'll take not all pilots, and so I looked for the drivers and downloads on HP support website, but on it, the research did not find my cell phone. But the laptop appeared when searched the main site... Only the support site had nothing for her. What should I do now? I want to buy this laptop but how they acquire drivers for windows 64-bit u? Help, please.

  Visit the following Web page for the drivers:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = in & DLC = in & sw_lang = & Product = 7280191 #N1648
  
  p.s.: ignore the above post.
  
  Thank you
  visruth

• VMware Workstation 8.0.3 and 16 Fedora (linux x86_64 3.3.6)

  All,

  Have a moment difficult installation of VMware wkstn 8.0.3 on my 64-bit kernel to run Fedora16 3.3.6. It seems only vmnet fails however, as all other versions seem to complete successfully:

  2012-05-25 T 08: 08:48.717 - 06:00 | vthread-3 | I120: Building module vmnet.
  2012-05-25 T 08: 08:48.717 - 06:00 | vthread-3 | I120: Extract the module vmnet sources.
  2012-05-25 T 08: 08:48.733 - 06:00 | vthread-3 | I120: Module construction with the command: / usr/bin/make-j - C/tmp/vmware-root/modules/vmnet-only self-build SUPPORT_SMP = 1 HEADER_DIR=/lib/modules/3.3.6-3.fc16.x86_64/build/include CC = / usr/bin/gcc = GREP / usr/bin/make IS_GCC_3 = no VMCCVER = 4.6.3
  2012-05-25 T 08: 08:50.344 - 06:00 | vthread-3 | I120: Unable to compile the module vmnet
  !
  2012-05-25 T 08: 08:50.351 - 06:00 | vthread-3 | I120: Try to find a PBM suitable for 3.3.6 - 3.fc16.x86_64 kernel.
  2012-05-25 T 08: 08:50.351 - 06:00 | vthread-3 | I120: Validation of path /lib/modules/3.3.6-3.fc16.x86_64/build/include for 3.3.6 - kernel version 3.fc16.x86_64
  2012-05-25 T 08: 08:50.355 - 06:00 | vthread-3 | I120: Your GCC version: 4.6
  2012-05-25 T 08: 08:50.369 - 06:00 | vthread-3 | I120: Your GCC version: 4.6
  2012-05-25 T 08: 08:50.399 - 06:00 | vthread-3 | I120: Header path /lib/modules/3.3.6-3.fc16.x86_64/build/include for 3.3.6 - 3.fc16.x86_64 kernel version is valid.
  and
  make: entering directory ' / tmp/vmware-root/modules/vmnet-only»

  do /lib/modules/3.3.6-3.fc16.x86_64/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD.
  . \
  MODULEBUILDDIR = modules
  make [1]: Entering directory ' / usr/src/kernels/3.3.6-3.fc16.x86_64'
  CC [M] /tmp/vmware-root/modules/vmnet-only/userif.o
  CC [M] /tmp/vmware-root/modules/vmnet-only/netif.o
  CC [M] /tmp/vmware-root/modules/vmnet-only/filter.o
  /tmp/vmware-root/modules/vmnet-only/filter.c:60:16: error: 'THIS_MODULE' undeclared here (not in operation)
  make [2]: * [/ tmp/vmware-root/modules/vmnet-only/filter.o] error 1
  make [2]: * waiting unfinished...
  /tmp/vmware-root/modules/vmnet-only/userif.c: in function 'VNetCsumCopyDatagram ':
  /tmp/vmware-root/modules/vmnet-only/userif.c:520:3: error: incompatible type for argument 1 of 'kmap ".
  include/Linux/highmem.h:48:21: Note: expected ' struct page *' but argument is of type '< anonymous > const struct.
  /tmp/vmware-root/modules/vmnet-only/userif.c:523:3: error: incompatible type for argument 1 of «kunmap»
  include/Linux/highmem.h:54:20: Note: expected ' struct page *' but argument is of type '< anonymous > const struct.
  /tmp/vmware-root/modules/vmnet-only/Netif.c: in function 'VNetNetIfSetup ':
  /tmp/vmware-root/modules/vmnet-only/Netif.c:134:7: error: unknown field "ndo_set_multicast_list" specified in the initializer
  /tmp/vmware-root/modules/vmnet-only/Netif.c:134:7: warning: initialization of the [default] incompatible pointer type
  /tmp/vmware-root/modules/vmnet-only/Netif.c:134:7: WARNING: (near initialization for 'vnetNetifOps.ndo_validate_addr') [default]
  make [2]: * [/ tmp/vmware-root/modules/vmnet-only/userif.o] error 1
  make [2]: * [/ tmp/vmware-root/modules/vmnet-only/netif.o] error 1
  make [1]: * 2 error [_module_/tmp/vmware-root/modules/vmnet-only]
  make [1]: leaving directory ' / usr/src/kernels/3.3.6-3.fc16.x86_64'
  make: * [vmnet.ko] error 2
  make: leaving directory ' / tmp/vmware-root/modules/vmnet-only.
  Everyone knows the same thing and know how it could be improved? Thanks in advance!

  http://darusintegration.blogspot.ca/2012/05/workstation-803-on-Linux.html

  This has been reported on several occasions, but this is my blog on the subject...  (I used Kubuntu 12.04 x 64)

  C

• Chinese blackBerry Smartphones support for BlackBerry 8800

  Hello

  Where can I get Chinese support for (T-mobile) BB device software?

  Thank you

  Hello

  I tried to download connect to another carrier to get Chinese help, when the BB8800 is a BONE volume, the message I get is no software available. Is it not the software is dependent upon carrier?

  Thank you

• Move the VM from VMWare workstation 7.1 for ESX 4

  I have a virtual machine created in VMWare workstation 7.1 (Machine virtual Version 7) and have copied to the data store on a host ESX 4 Update 1

  I don't know why I still need to re - import the virtual machine with vmkfstools-i source/destination before it will boot as ESX 4U1...

  Can someone shed some light on this?

  Hello

  Have you tried using the Workstation 7 export feature?

  By using this feature, you can create a consistent ESX VM or a virtual appliance which you would then be able to reload on your ESX.

  In VMware Workstation, click file-> import / export

  For the Source, you must select the Type of source: 'others '.

  then, you look up your VM's vmx file.

  Once in the destination Type, select VM Infrastructure VMware or Virtual appliance.

  If you select VMware Infrastructure, it will ask you your server address VCenter or ESX + credentials and it will load it automatically.

  If you select Virtual appliance, you will be able to create an OVA or file OVF that you can use to create a new virtual machine based on this device in VClient.

• Adobe PDF Reader has support for broadcast all rendered document content in a browser?

  Adobe PDF Reader has support for broadcast all rendered document content in a browser? I have to make the document PDF in browsers using the streaming so that the user can see the first pages, while the rest of the pages in the document is loading in the background. Could someone please confirm if this capability of streaming is supported by Adbobe Reader?

  I tried below approach and noticed that the document is not rendered in IE at all (I see a blank page). However, in Chrome, I see the rendering of the document, but the content is not rendered correctly (I mean that some of the content is rendered. In addition, images and tables not is not made properly).

  Code snippet:

  =========

  Response.ClearHeaders ();

  Response.ClearContent;

  Response.ContentType = "application/pdf";

  Response.AddHeader ("content-Transfer-Encoding", "binary");

  Response.AddHeader ("Content-Disposition", "inline; exit = filename"+".pdf");

  Response.AddHeader ("Pragma", "no-cache, no-store");

  Response.AddHeader ("Content-Length", stream. Length.ToString ());

  Response.BufferOutput = false;

  const int bufferLen = 2048;

  ubyte [] buffer = new byte [bufferLen];

  int count = 0;

  While ((count = stream. Read (buffer, 0, bufferLen)) > 0)

  {

  Response.BinaryWrite (buffer);

  }

  Response.End)

  Adobe Reader has very sophisticated support for broadcast in a browser, but using this code, you have disabled.

  Your code offers you the PDF file in one piece - Adobe Reader has no choice other than to accept the piece in the order in which send you it.

  However, if you use a PDF by http URL, and it is optimized for fast web view and it is displayed in the browser window, and the agent viewing is Adobe Reader (usually is not the case with Chrome), then it will launch several requests to the server for the beaches of bytes according to the needs.

  It is theoretically possible for a script to support this, but the script must do a range support full http/1.1 byte, supporting several repeated calls. It's complicated enough that I have ever seen.

  If you can redirect to a URL, it will get done.

• VMWare workstation + Hyper-V (Windows 8)?

  I know that in the past I tried to combine hyper-v on a machine and vmware workstation that has not worked. I don't understand why because both probably need exclusive access for virtualization by the processor hardware. This use case will still work? I didn't know if this is a hardware or software limitation. Perhaps more recent processors allow multiple layers of virtualization access pieces of virtualization? The reason I ask is I would like to install hyper-v on my machines of windows 8, but hyper-v has limits that vmware fillings of workstation (namely that support usb) so I wonder if it will ever be possible (or maybe that's now because I tried really long ago) or do you think it will always be a limitation?

  BTW: The current processor, I'm declining to do so is a bridge of Ivy (i7-3770).

  Thank you...

  On a deck of Ivy, you can run Workstation as a comments under Hyper-V hypervisor, but you will be limited to 32-bit guest nested under my computer, because Hyper-V virtualizes not features of virtualization assisted by the physical processor hardware.  See nested running VMs.

• installation of vmware workstation 6.5 on windows 10 error

  After you install vmware workstation 6.5 on windows 10 it gets error and restart. Is vmware workstation 6.5 support windows 10? FAILED TO INSTALL. vmware workstation 6.5 on windows 8, 8.1 and 10 support. ALL SUPPORT. I still don't understand...

  VMware Workstation 6.x do not support Windows 10 and will never support Windows 10.

  VMware Workstation 6.x reached "end of support" four years, October 1, 2011: Matrix.pdf product lifecycle

  We produce updates for release until its date of "end of support".  A product may not work properly with host OSes, processors or comments OSes that are not compatible with the product, especially the things that have been published after the date of "end of support".  We put a huge amount of effort to ensure that new hardware and operating systems works with each new major release of VMware Workstation, but we cannot go back and update any previous version of product to add support for all hardware and operating systems more recent.  If we tried to do this, VMware Workstation cost much more that it is today, simply because of the amount of work required to maintain!

  You need to upgrade your installation of VMware Workstation to something more recent, or downgrade your host operating system to a version compatible with VMware Workstation 6.5.

  I hope this helps!

  --

  Darius