VMWare Workstation does not stop is a virtual completely on Surface Pro 3 machine

Similar Questions

• 'VMware Workstation does not support the multiple monitors feature in other guests'

  When I click the icon "Cycle multiple monitors", I get the message "VMware Workstation does not support the multiple monitors feature in other guests."  Google found me no hits on it.  Anyone know what that means or how I could get multiple monitors to work?

  The host OS is Windows 7 Professional x 64 with service pack 1 applied.  The guest operating system is Debian Linux, version 8, also 64-bit.

  $ uname - a

  Linux debianvm 3.16.0 - 4-amd64 SMP 3.16.7 - ckt9-3 #1 ~ deb8u1 Debian (2015-04-24) x86_64 GNU/Linux

  The virtual machine was created with VirtualBox, then exported to a .ova file, then imported into VMware Workstation.  VMware Workstation is version 11.1.2 build-2780323.

  -Steve

  Hi Steve and welcome on VMware communities!

  With your virtual machine turned off the power, go into the settings of your virtual machine and on the Options tab, under general, select the client OS type: Linux > Debian 7 64-bit.  Then try to turn your virtual computer and see if it works.  (8 debian is quite close to Debian 7.)

  See you soon,.

  --

  Darius

• Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Any ideas out there?
  I know the pro 2 surface is not the real model, but at least it should work fine.

  arwinq,

  You can see the system requirements, including the maps here.

  https://helpx.Adobe.com/Illustrator/system-requirements.html

  but I fear that you may be taken in this GPU issue described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

  You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• Update Windows 10 November (10586 aka 1511): bcdedit/set hypervisorlaunchtype off, but VMware Workstation does not start VMs with conflict of Hyper-V

  Hi all

  I upgraded from Windows 10 Windows 10 November updated this morning.

  I have the Hyper-V role is installed and use it from time to time, but bcdedit to configure the boot loader to disable Hyper-V by hypervisorlaunchtype power off.

  This technique has worked with 10 Windows and VMware Workstation and I could start and run virtual machines

  Since I did the upgrade, I can't start VM with this standard message "VMware Workstation and Hyper-V are not compatible"

  I am running VMware Workstation 10, but suspect that this problem also exists with later versions.

  Everyone knows about this problem?

  Someone at - he found a solution?

  I'm willing to fork over $150 for 12 workstations to solve this problem, but I want to know with certainty that it is circumventing my problem.

  Thanks for that.

  Uninstallation and reinstallation of the hyper-v feature, following the upgrade of Windows Windows 10 November 10 update solved the problem.

  I still need to run the following command to disable the Hyper-V technology

  bcdedit/set hypervisorlaunchtype

  Thanks to everyone for their help.

• VMWare Workstation does not work after successful installation

  Hello world

  I installed VMWare Workstation 6.0.5 on Win XP SP3 with success, but the program itself does not start, I get no error messages, just nothing happens. Nothing in the logs of the system either.

  When I tried to run the program in Mode safe mode, it worked!... (obviously impossible to start a computer V, but Workstation started very well)

  any ideas?

  Thank you

  Hello

  I think I just found the reason... and a deaf mute.

  I have installed many programs of news lately for the WebCam and connect it to my DirectTV DVR.  So I did not understand that the wrong software belongs to but think it is the WebCam install stuff that belongs to Live Messenger.

  Anywho, the process that prevents any software vmWare installation or execution was "FixCamera.exe".

  Once I have debug more I will update this list.

  It's by chance luck that I found that I was killing various thought process that it could be linked to the virus filters.

  Kind regards

  David

• Why vmware workstation does not mask the cpuid SYSCALL/SYSRET little?

  I am running VMware workstation 11.1.3 on linux.  In my client operating system 64-bit, I notice that cpuid for eax = 0 x 8000001 returns a value edx masks who has always little 11.  It's the bit SYSCALL/SYSRET ability.

  Here is the part of the vmware.log file shows the parameters of my hostCPUID:

  2016 02-03 T 15: 59:19.629 - 08:00 | VMX | I120: hostCPUID level 80000001, 0: 0x00000000 0x00000000 0 x 00000021 0x2c100800

  As you can see, edx is 0x2c100800, which means that my system is capable of SYSCALL/SYSRET.

  I tried to add the following to my vmx file:

  monitor_control.enable_fullcpuid = 'TRUE '.

  CPUID.80000001.EDX = '-:-:-:-:-: 1 -: -: - ".

  Unfortunately, even with these settings, my diary of vmware shows no entry in the section 'Differences CPUID of hostCPUID' to cpuid.80000001.

  As a test, I tried to change bit 10 instead of 11 to cpuid.80000001.edx bits and the difference that presented themselves.  So what is the 11 bit characteristic, and why is he always have hidden inside the virtual machine no matter what I do?

  Thank you.

  You check what code 64-bit or 32-bit code in compatibility mode?  Mode 32 bits (legacy and compatibility), only AMD processors set this bit.

• The VMware Workstation Server service stopped with service specific error %-1.

  Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.

  Running on Windows 7 SP1 x 64. The port is set to 7443.

  I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.

  Thanks for all the ideas, what could be wrong and how to fix it.

  Hello

  I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.

  I have attached the file to this message.

  Change of the section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!).

  I hope this helps.

  Steve

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  If Firefox detects that the places.sqlite database is corrupted then Firefox can create a new database file and import bookmarks from a JSON backup that does not contain the most recent bookmarks (a new JSON backup is created when you run Firefox for the first time on a day), then you may lose the bookmarks in such a case.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• Satellite A500D - fan does not stop

  Hello

  Two days ago I updated the Bios to version 1.20 win, and since then, the fan is constantly at 72% and the temperature of the CPU at 36 º.

  At Toshiba, I say it is normal, but the fan does not stop at any time and the noise is annoying.

  Anteriormento updated the BIOS, the fan stopped and started and never surpassed 54%.

  Looks like a vergueza by the care service, they have given me, I tried to deceive, as is normal for a portable fan that keeps 72%.

  Please I need someone to tell me where I can download before my Bios and how to install it.

  PS: My processor ens Turion Rm-77.

  A welcome message

  Hello

  You mean the cooling module fan didn't run all the time with the previous BIOS version?

  Well, in this case you must downgrade BIOS to the previous version.
  The problem is that you can download the latest version of the BIOS from the Toshiba page.

  But maybe a Toshiba ASP might help you and may downgrade the BIOS to the previous version

  But have you tried to change the settings in Win 7 power option?
  You can find it in the control panel-> power options

  There you can change modes of single power supply.
  In the power settings advanced, you'll find settings Toshiba energy saver and there you can change the method of cooling while the laptop is running on battery or power.

• Tecra M3-264: the fan does not stop

  Hello

  I have a labtop Toshiba Tecra M3 264, it's wonderful BUT,.
  The fan does not stop and this sound is a bit noisy in comparison with the other all I have.

  Is this normal in this model or should I take it to the service?

  Hello

  It is normal activity on new laptops cooling fan is very noticeable on older models. I recommend you to check what happen if you change the settings of cooling method in power management.

  By the way: allow the unit to take a breath. Make sure that the ventilation openings are free and that there is nothing that can stop the flow of air. If the vents are dirty and full of dust, it can also be responsible for cooling fans runs often and with a higher speed.

  Good bye

• E540: Fan does not stop

  Hello Board and support team!

  The fan in my e540 does not stop once it began to turn. It is completely independent of the system temperature. Even if the room temperature and the cpu is less than 40 * C the fan will not stop.

  The fan does not always turn, however. If I wake up the system from sleep mode or turn it on, the fan does not turn and will not start spinning until a certain threshold temperature is reached. This part of the fan control works correctly.

  Interesting procedure: I work until the heating system and the fan starts. I waint until the system is cooled below 40 * C (checked with software speccy, the flow of air leaving the laptop is cold). The fan is still running at this stage and will turn probably forever. I suspend the laptop (no full stop not required). I immediatally 'wake up' the laptop (temperature of the system has not changed, no time to cool). The fan is off again and will not start turning until the temperature threshold is reached.

  What can I do to fix this? I don't always want to suspend my laptop to turn off the fan. She has to stop on its own.

  
  

• S440/Win10 - does not stop correctly

  Hello

  I have upgraded to windows 10 recently. After the upgrade, sometimes, the laptop does not stopped correctly - windows stops, the screen goes black, but thinkpad red LED remains flashing and I hear the fans still doesn't work. To really stop I have to press and hold the power button. The battery also is to be served, because after that I left it like that night, it was gone.

  Now, it's a little weird because it isn't always happens. It only seems to happen after that the laptop has been for a while. If I had to bet, it would be related to switchable graphics as the behavior resembles the problem with graphics terribly switchable and sleep on win8.1.

  To work around this problem, I took to restart the computer and stop just after shot, but Needless to say it is suboptimal.

  Anyone has any ideas on how to fix it?

  I think I found a solution. I have seen this mentioned in other forums of laptop, and it seems to have fixed for me.

  The culprit seems to be this driver:

  Intel(r) Management Engine Interface Driver for Windows 10 (version 11)

  If you install the earlier (version 9, should be on the lenovo driver page) it solves problems of stop/standby.

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• Called vi with one hand, it does not stop

  Hi all

  I try to call a vi of a principal, I have succedded to call the vi but I couldn't stop the main vi and the called vi does not stop and disappear. Where I did wrong?

  LabVIEW follows a model of data flow for execution of vis a block diagram node runs when it receives all the required inputs. When a node is running, it produces output data and transmits data to the next node in the path of the data stream. The flow of data on the nodes determines the order of execution of the VIs and functions on the block diagram. Source

  Once you have called your Subvi, your main VI is pending so that it ends before it can move to the next State in the state machine which is the reason why it will not stop.  If you want to run a separate VI, you can call an asynchronous mode