Could not create library

Similar Questions

• Deparquement cloud installation I get the message which appears "failed to start CoreSync could not create/Library/Application Support / Adobe / CoreSync ' on an iMac with OSX Yosemite 10.10.3. The finalization of installation not its actually not. C

  Deparquement cloud installation I get the message which appears "failed to start CoreSync could not create/Library/Application Support / Adobe / CoreSync ' on an iMac with OSX Yosemite 10.10.3. The finalization of installation not its actually not. How do I?

  Brandon,

  Please adjust the permissions of the user on this issue: activation and using the user 'root' on OS X - Apple support

  You can also find details on how to adjust the permissions of file to error 'Output 6' or ' exit 7 "|"» Install log | Read, write, file system errors. CS5, CS5.5.

  See also:

  https://forums.Adobe.com/thread/1714050

  https://forums.Adobe.com/thread/1828087

  Guinot

• Could not create - / Library/Application/Support/Adobe/CoreSync?

  I tried to install Creative cloud on a second Mac and can't make it work. When I install it, it says: could not create - / Library/Application/Support/Adobe/CoreSync. As I wanted, I can not download PS and LR. What can I do?

  Change permissions on this folder user / run as a user with sufficient privileges, in the first place.

  Activation and use of the user 'root' on OS X - Apple support

  Mylenium

• MAC Setup error - could not create ~library/application support/adobe/CoreSync

  Please forgive my blunders (but I do the best I know how)

  OK - just sign up for the monthly plan for PS and LR CC

  "Creative Cloud Installer" - [double click file DMG] downloaded and installed

  CC launched automatically, BUT then he says; CC does not, please re - install.

  Applications-utilities-Adobe Installers \Uninstall Creative Cloud [double-clique]

  Files deleted from original ccInstall.DMG

  Redownloaded (is that really a Word?) CC the installer for Adobe and repeat steps 1-3 and... same problem.

  I read that OSX 10.7 would work (but I have read many things on the Internet that actually did not work)

  I suspect THAT my OS is outdated ;(

  I have a MacPro 1.1, which means that OSX 10.7.5 is the last OS that will run on my machine (sigh)... and PLEASE don't tell me that I should have bought Windows. I HAD Windows, that's why I (finally) to buy a Mac-> actually, it's the lesser of two evils, just more expensive.

  I really want to use PS

  I really don't want to buy a new Mac, just to use PS (in fact, it isn't even an option)

  Help? Anyone?

  Thank you.

  Hi liviam,

  HERE IS THE FIX:

  First of all, go to Applications-Utilities-Adobe Installers-"Uninstall Adobe Creative Cloud" and uninstall the program.

  Then go to: Library-Application Support-Adobe.

  -> Click RIGHT on the "CoreSync" folder, and select "get info".

  In the lower part of the "get Info-> select"recovery"" then in the column 'Privilège', change it to "Read and write" (or what is available) so long as it is NOT 'read only '.

  Re-install Adobe CC. It worked for me.

  Good luck

  Ron

• Install error on Mac "could not create ~/library/application support/adobe/coresync."

  Any reason why this happens and what I need to do?

  

  I¹ve has created a new admin user and it works with that. So it must be my profile

  permissions?

• I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/filter

  I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/Filter Presets. Any ideas on how I can fix this?

  Hi Anthony,.

  You must go to the location: admin/Users / / Library/Application Support/Adobe/Lightroom

  Hold down the CTRL key and click on Lightroom, click on read the information and click the permissions tab.

  Provide the permissions to read and write to your identifier and then close.

  Then reopen Lightroom. You should be able to open Lightroom.

  Please let us know if it helps.

  Kind regards

  Tanuj

• Could not create the required folder: / Users/Jonas/Library/Application Support/Adobe/Lightroom/Filter Presets

  Could not create the required folder: / Users/Jonas/Library/Application Support/Adobe/Lightroom/Filter Presets

  Hello

  Please try below steps:

  1. close Lightroom

  2. open Finder and click on go (in the menu bar) and choose go to folder

  3. tap ~/library and click Go

  4. open the Application Support > Adobe

  5 rename the old folder Lightroom in Lightroom

  6. start Lightroom to make sure it loads well

  Kind regards

  Claes

• Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/li

  Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/lightroom/develop presets." I tried disconnecting and then signing unistalling the app and back in and resettlement. nothing seems to work. any help would be appreciated.

  Cannot create the folder means that you don't have WRITE permission for this folder. Then... change your permissions.

• I installed Adobe Lightroom CC.  Launching, a popup appears, which says: "AN INTERNAL ERROR has OCCURRED.  Could not create the required folder: /Users/(my user name)/Library/Application Support / Adobe / Lightroom / develop Presets. "E Yes

  I installed Adobe Lightroom CC.  Launching, a popup appears, which says: "AN INTERNAL ERROR has OCCURRED.  Could not create the required folder: /Users/(my user name)/Library/Application Support / Adobe / Lightroom / develop Presets. "So even if Lightroom CC is installed, it will not launch.  What should I do to allow him to launch?

  I had the same problem, just bought a new Macbook Pro (June 2015) and Lightroom CC had this error as well.  Here is the dialog box that I've had with Adobe, and it cures the problem:

  Adobe: Please click on the search option in your Dock at the bottom of the screen.

  Adobe: Then click GO on the MenuBar at the top of the screen.

  Adobe:, and then click GO to folder, and then type: ~/Library/Application Support/Adobe /.

  Scott: OK, I did

  Adobe: Control-click on the folder and choose read information.

  Adobe: Expand the section sharing & permissions.

  Adobe: Click on + icon, and check if the administrator select

  Scott: OK, I chose the Admin

  Adobe: Give read and write to the Admini

  Scott: completed

  Adobe: Click the gear icon and select apply changes to included items

  Scott: OK

  Adobe: In the Finder window, click GO and select GO to folder

  Adobe: Type in
  Adobe: / Library/Application Support/Adobe/ and press enter

  Scott: completed

  Adobe: Control-click on the folder and choose read information

  Adobe: Expand the section sharing & permissions.

  Scott: ok

  Adobe: Give read and write permissions to all users

  Adobe: Then click on the sign + and add the rest of the users from the list

  Scott: completed

  Adobe: Now, please try to use the Lightroom from your computer.

  Scott: Thank you - it works!

  Hope this helps others.

• Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10

  This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.

  Here's some output terminal which can help you to (I) hope.

  Blakes-MBP:~ blakeleeper$ diskutil list
  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.1 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            499.2 GB   disk0s2
     3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *320.1 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:       Microsoft Basic Data                         319.9 GB   disk1s2
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +498.9 GB   disk2
                                   Logical Volume on disk0s2
                                   27D631AE-27C5-4E4B-98BC-92CE944ED60B
                                   Unlocked Encrypted
  /dev/disk3 (external, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:     FDisk_partition_scheme                        *16.0 GB    disk3
     1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk3s1
  Blakes-MBP:~ blakeleeper$
  

  You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.

• Error message Microsoft Word "Word could not create the work file. Check the amount of disk space on your startup disk. »

  I have a MacBook Pro, retina 13inch OS X el Capitan Version 10.11.1 with 16 GB of memory. It's brand new and I have recently installed Microsoft Word/Powerpoint etc. a disc that I bought a few years to my previous MacBook. It seems to work very well, but whenever I want to open a word document a message comes up saying "Word could not create the work file. Check the amount of disk space on your startup disk '. However, once I click 'OK' this message disappears and my word file opens without a problem. I have 16 GB of memory on this laptop and it's new I have not reached anywhere near the maximum amount of storage so I'm puzzled as to what this message means. How can I avoid that this message popping up everytime I open Microsoft Word? Any help would be appreciated!

  This has nothing to do with memory - it's the SSD. Word tries to create a temporary file to use as a backup if the program crashes while you are working. First, run the Microsoft Update program to see if there are updates you have missed. Second, Microsoft currently supports only versions 2011 and 2016, so if yours is older, you should consider the upgrade. Thirdly, I suspect that the temporary file is not get created so that you have fewer cancellations (maybe any) and that if the program crashes you have to restore.

• LabVIEW, could not load library blockdataapi.* & quot; BlockgetIOReferenceByModule:C on

  Hello

  After copy of project and re-Assembly, I fell into a large number of problems. LabVIEW is suspended, MAX crio error, no communication to my cRIO-9074, etc.

  I formatted the drive and re-installed the software Labview and now at least MAX has no errors, IP adr. Ok.

  Deploy my application VI gives (as before); LabVIEW could not load library blockdataapi.* 'BlockgetIOReferenceByModule:C on the device target RT.

  VI does not run.

  How can I fix this problem?

  Greetings, Frank

  Hi Frank,.

  It looks that your VI using the NI Scan Engine Advanced IO access API (http://zone.ni.com/devzone/cda/tut/p/id/8071)

  This component is not installed by default, you must add it as you have formatted your cRIO.

  The excerpt below if the link above with installation instructions document:

  «Support for the API to access IO advance must be installed on the objective of the measurement and Automation Explorer (MAX).» Expand the target under remote, devices right click on softwareand select Add/Remove programs. Select custom software installation and install the component called NI Scan Engine Advanced IO access 1.0. »

  I hope this helps!

  Kurt

• HP Envy 14-1200 Prod # XQ103AV: "we could not create a new partition or locate an existing one. See the Setup log file.

  System - HP Envy14 - 1200 Beats Edition Notebook PC Series - product # XQ103AV.  It came pre-installed Windows 7.

  Error message "we could not create a new partition or locate an existing one.  See the Setup log file.

  appears in the new installation of Windows 8.0.

  Installation of MS Windows 8 DVD detects the hard drive OK.

  Software mini of Partition of the tool (3rd part) detects the hard drive OK.

  Windows 8 DVD software both MiniTool detects the disk partition and its OK formatted, but the error message is displayed to prevent installation.

  Here are the steps that I tried to solve the problem, but it won't work.

  1 opportunity Microsoft Windows 8 DVD diskpart to clean HD, to partition and to format... always get the same error message.

  2 opportunity Microsoft Windows 8 DVD diskpart to clean HD and partition... always get the same error message.

  3 MiniTool Partition software used to clean the HD, partition and format... always get the same error message.

  4 MiniTool Partition software used to clean HD and partition... always get the same error message.

  5 has bought a new hard drive repeat steps 1 to 4 and I got the... its error message.

  Background

  I have upgraded to Windows 8 Windows 7 and it worked for 2 months, then I upgraded to Windows 8.1.

  After that the system is being updated and restarted, the screen turn black.  So I decided to re - install Windows 8.0.

  There is no SIM card in the laptop.

  Help, please...

  I managed to do work Ok. Use Windows 8 DVD to run Diskpart

  1 delete the partition.

  2. restart the system.

  3. allow Windows 8 DVD to perform the partition and format the HD.

• Could not create the work file. Check the temp environment

  After I did my Vista SP2 update, the only thing I could do was to reformat the HD. After all, including Office 2007 reloading, Outlook and work has worked well. Again, I went through the updates, Vista and Office SP 2 and now in Outlook and Word I get this error message Outlook (Word) could not create the work file. Check the temp environment

  variable. I am alos having other problems in Word. Help, I can't find all the answers!

  Follow the steps below at our own risk.  Set a restore point before doing this. Make a mistake in the registry can have bad results

  In your registry HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Explorer\User Shell Folders\Cache Database Cache data value must be %USERPROFILE%\Local Settings\Temporary Internet Files

  Close all programs. Then in the registry editor, once you get in the folder above, right click on "Cache", make a left-click on "Change", paste in "%USERPROFILE%\Local Settings\Temporary Internet Files" (without the quotes), on the left, click 'Ok' close the editor of the register. Restart the PC.

  This should solve your problem.

  - Http://blogs.msdn.com/powlo/archive/2007/01/01/fix-for-error-outlook-could-not-create-the-work-file.aspx

  a. start-> Run-> enter "regedit" and press "Enter" to run the program to change registry variables.

  b. navigate to the folder-> "HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Explorer\User Shell Folders\Cache"

  c. check the values of variables [for everything in the "User Shell Folders" folder] - all the variable should have values from '% USERPROFILE%\ '. ». Any variable that is not of this starting point is probably damaged. In my case, all variables corrupt has been a correspondent of "Backup_VariableName". Example: my variable "cache" was damaged when there is a variable called 'backup_cache' with the correct values

  d. change the value of variables corrupt to correct the values. Example of change variable value "cache" in "%USERPROFILE%\Local Settings\Temporary Internet Files" and so on.

  e. close all of Ms Office programs, and turn. The problem should be solved now.

  I added the text in square brackets [] above.

  Microsoft partner - "gentlemen, you can't fight in here! This is the war room. »

• MMC could not create the snap-in-windows server 2012 R2

  My problem:

  MMC could not create the snap. The snap-in may not be installed properly

  Name: Windows Deployment Services

  CLSID: {8D92C23E-7E5F-42BB-810F-0211F8A453C4}

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.