Voice over on my ipod Version 1.0.4.

Similar Questions

• Why my iphone 4s are on the voice-over in itself?

  The first time it happened to my iphone 4s, I made an APPT at the Genius Bar because my screen would fade to black as soon as he came. They fixed, said that had been "Voice Over" in the settings. I had recently been in settings but didn't even know what "Voice Over" was so I knew that I don't. Then, about a month later it happened again. I was looking at my phone, everything to Unsnap, when the screen just disappeared to the black and would not come again no matter how many times I reset, tried the reset of itunes, etc.  Later, after making another appointment at the Apple Store, like last time, I could still hear Siri whisper very softly... hmmmmm. I asked Siri to turn my phone on, and she said that she could not. Then I asked for the "Voice Over" disable and she did it and voila, I had a photo again.

  How can I do what happens to stop? Sort to always turn off 'Voice Over'?

  Thanks for any help anyone can offer :)

  chgo2ark

  Go to settings > general > accessibility > accessibility shortcut and make sure VoiceOver is not checked.

• Satellite A200-27R integrated microphone for voice over IP

  The description of the product (see excerpt below) for a Satellite A200-27R indicates that the A200-27R has a microphone for voice over IP. I couldn't access it (for example with Skype, Live Messenger, control panel) there's no sign of her external on the computer. Control Panel > Sound > tab says Recording Microphone Realtek High Definition Audio not connected.

  How to configure and use the microphone for voice over IP?

  Features of the Enhanced Numtxpackets® Speedstepa® technology
  SM BIOS compatible
  HD Audio compatibility
  Microsoft® Windows® Hotstarta? ¢ for the entertainment of instant fusion
  Multimedia bar with 6 easy keys (Internet browser, CD/DVD launcher, Play/Pause, Stop, Rewind, forward)
  microphone for voice over IP

  Hello

  The built-in microphone depends on the webcam.
  As far as I know, the Satellite A200-27R PSAE3E was not equipped with an internal webcam and so the internal microphone is not available.

  Try to use an external headset or just simple microphone.

  Concerning

• Audio level of the Voice-over element does not match level of audiometers

  I speak in my external USB microphone and create an audio clip of the voice-over. The audio level of the clip is too low - the voice is too quiet, so I climb the audio level in the clip.

  But it still sounds too low, especially on the meters, which are reading down below-12. So I try to push the audio level of the clip all the way to the top. Now, in the clip, the tops of the audio track are red and are cut.

  But out there on the meters, it's another story. Counters show no break at all; in fact, they show the audio level between-6 and 0, which is where I want it to be. And the voice and the words sound very well in my helmet - I can't detect any cutting or other abnormalities.

  So what should I do, leave audio level of the clip pushed all the way upward, with the red list of the peaks and cut and go through the meters, which show that it is very good?

  Who should I believe, warning of the audio sound is distorted or indication the meters that everything is good with the fact that it sounds good?

  Tom B.

  Occasionally, I had this problem.

  The actual meters seem to stop at 0db and never go higher despite the audio tracks, display of the peaks above 0 dB.

  Try to play the clip/s in question backward.

  I remember that DV is an offender of this audio oddity.

  Can you tell us what are the specifications of the clips?

  As much as I know this problem is not resolved.

  Al

• How to add music to read during a voice over?

  I'm doing a project with photo slides and a voice over, but it is necessary to have a background music playing during the voiceover

  Hello

  ·         What operating system do you use?

  ·         What application you use to carry out a project with slides and a voice over?

  You can use Windows Media center or Windows movie maker to create a slide show with music. You can refer to this article:

  http://Windows.Microsoft.com/en-us/Windows7/creating-slide-shows-with-music-in-Windows-Media-Center

  For Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-create-a-slide-show-with-music-in-Windows-Movie-Maker

• You can synchronize audio voice over existing?

  I have a piece of animation that has a voice over track.

  I could synchronize the audio to the host character?

  1. create a scene at least a puppet

  2. import your audio files in this scene

  3 select a track of puppets

  4 object > calculate Lip Sync of Audio scene

• PDF files that I export to an iOS app won't read in voice-over

  Export works very well since InDesign for a 10 page file and displays of file on the iPad. Interface for the app in voice-over readings, but it will not read the text of the PDF file. Bookmarks have been enabled in the settings of the DPS. For the moment, it does not resemble a robust feature of demand and the lack of control over the parameters of the PDF driver is frustrating.

  Any ideas on how to get to their work?

  VoiceOver is not supported with DPS at this time.

  Neil

• Help with voice-over in CS6

  Hey all,.

  Is it possible (via settings, plugins or any other method) which would not have me keep remove my helmet during the recording of voice over?  I think there should be a way, as all the other basic videos editing software out there puts mute your headset when you save a voice above.  I do it for the type of videos (show comic compilation) I do about 100 small voiceover, as I edit my videos and I have to do both at the same time (which means, I can just make the changes, then go back and redo one voice).  If it completely slows the flow of work to have to keep my helmet on and outside.

  Is this in any way about this?  Any help would be GREATLY appreciated from e.

  Thank you

  Eric

  Adobe Premiere Pro * audio recording

• Voice over recording change vs multitrack view

  Hi guys, need some advice here.

  I always taped voice-over in editing with Audition 3.0 (Windows 7 64-bit)

  Recently, I bought a Creative sound card (X - Fi Titanium HD) that sounds good and that records 24 / 96 kHz with excellent results using several different microphones, mainly an EV RE20.

  I have the main of my mixer left and right coming out using cables of 1/4 inch outputs and enter the audio card to the left and right inputs via RCA...

  In the audio hardware setup Auditions change the display, there is only a choice either to the left or right to the but not a mixture of the two as a starter. (aid to the left)

  Do not use the input on the card because I wanted to use the ins RCA (left/right) on the sound card and microphone input is a 1/8 input that would require another Y microphone cable 1/4 to 1/8 and the fact that I had issues with 1/8 entries before.

  Then, when I record the voiceover in the edit mode, I think I'm really only half of the signal (to the left) which means that I need to gain preamp more that I would get a good level.

  Recently, I have been recording in multitrack view using the 1-way left and right track 2 at the and then doing a mono mix that translates into a very pleasant without level to increase the gain a lot.

  So I guess my questions would be I'm actually saving half the signal change their view by simply using the left

  and if that's true, I just have to continue recording in multitrack view using the configuration I described above.

  Any advice would be greatly appreciated.

  It's just a signal level - you actually lose anything. You can't actually say it is 'half' a signal - it is just a signal at a different level. And you can always get the audition level without loss by record or convert your signal in 32 bits (native format of the hearing) to floating point and it normalize to the level of what you want. When you have only a mono microphone - a track is all you need, there is absolutely no benefit to the recording of two tracks. As to how you save (MV or EV), well it is entirely up to you – that really suits you. The only notable difference is that EV record in a temporary file to be saved in a permanent file later and MV went directly to a file.

  Do you use a microphone preamp with your microphone if you use the entries in the? If you're not, you don't get something like the good structure with the card, such as a microphone does not what whether as enough signal to drive an entry to the correctly. It is a hardware problem, and not one that you can correct for with software, because it will significantly change the signal to noise ratio.

• Voice Over - Narration

  Hi all

  I am trying to learn how to do the voice-over.  I made a short video to show them what I know so far.

  http://screencast.com/t/YTkyMWFhOG

  Any help will be greatly appreciated.

  Thank you

  Robby

  

  Yes, I meant the same thing on 'Activate' and 'enable '.

  To add a track, go to the sequence in the timeline panel, place the pointer in the left of any track emty space, right-click and select "add tracks". In the drop-down menu for audio "track type", select "mono".

• Voice-over work is not on iPod Touch

  Hello

  I have a 5th generation iPod Touch 32 GB, A1421 and my VoiceOver option and 'talk' to the selected text do not seem to produce any sound. I checked the volume control, changed vote, passed to the voice of Siri (Siri works very well), but it still does not. Also, the interface of VoiceOver works. Initially, I assumed that I had my iPod on mute, but no. I think it started when I updated to iOS 9.3.4. I was not using VoiceOver on a regular basis, but it was certainly a month or two ago. Any help would be greatly appreciated!

  Thank you

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

  If still problem is a bug in the iOS 93.4 or make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

• How can I get rid of the voice command on my iPod iOS 6.1.6

  The voice command suddenly appeared and interrupts all the time. I want to get rid of. I have been in settings and off voiceover but it makes no difference. It comes even when I turned off my iPod and when I then go to use it the battery is flat. Help, please.

  To turn off VoiceOver on iPod nano using VoiceOver gestures

  1. slide to the right or to the left with two fingers until you see or hear parameters.

  2 double-click to open settings.

  3. move your finger up or down the screen until you see or hear general, then double-click.

  4. move your finger to the top or the bottom of the screen until you see or hear the accessibility, then double-tap.

  5 move your finger up or down the screen until you see or hear VoiceOver, then double-click.

  http://support.Apple.com/kb/HT4317

• Pentecost of Smartphones problem Voice Chat blackBerry BBM new Version

  Dear,

  I downloaded the new BBM version with voice chat, but unfortunately it was and the icon and say your voice chat connection cannot be established.

  3 G and connection WIFI my black berry is no problem please could you please support me and tell me about this problem.

  Respect of

  WIDI

  Did restart you your device by pulling on the battery?

• Problem with GRE over IPsec with IOS Version 15.1 (2) T4

  Hello

  We have several sites that use of GRE Tunnels with card crypto for encryption.  To upgrade to the latest version of a UC-520 (15.1 (2) T4 or any version of this train) I get the following error: -.

  SIN-UC520(config-if) #crypto map aberdeen

  % NOTE: crypto card is configured on the tunnel interface.

  Currently, only one card encryption GDOI is supported on the tunnel interface.

  The original Tunnel config is below:-

  interface Tunnel0

  Description Tunnel to Aberdeen AC

  bandwidth of 512

  IP unnumbered Vlan1

  IP mtu 1420

  QoS before filing

  tunnel source a.b.c.d

  destination e.f.g.h tunnel

  Crypto map aberdeen

  Decommissioning of the IOS version solves the problem.   What gives?  Have Cisco dropped support for this configuration?

  I use this setup so I can choose exactly which traffic is encrypted (I do not encrypt voice for example).

  Thank you
  Peter.

  Hi Peter,.

  It looks like from the 15.1 this configuration is no longer supported. Here's what the release notes:

  Error message appears when you try to apply the tunnel interface to a card encryption.

  Old behavior: Error Message is not displayed when you try to apply tunnel interface card encryption using the command card crypto (interface IPSec).

  New behavior: an error message appears when you try to apply the tunnel interface to a crypto map using the

  crypto map command (interface IPSec).

  http://www.Cisco.com/en/us/docs/iOS/15_1/release/notes/151TNEWF.html

  The order reference has the following information about the error message:

  

  A card encryption cannot be applied to a tunnel interface. If you try to apply the tunnel interface to a card encryption, an error message is displayed as follows: crypto card is configured on the tunnel interface. Currently, only card crypto Group domain of interpretation (GDOI) is supported on the tunnel interface.

  http://www.Cisco.com/en/us/docs/iOS/Security/command/reference/sec_c4.html#wp1078283

  So it seems that on the new version, you can only use one (new to me) maps crypto GDOI on your tunnel interfaces.

  Here's a doc that explains the GDOI implementation, I wish that I could help with the Setup, but as I said, I had not heard of him until today.

  http://www.Cisco.com/en/us/prod/collateral/iosswrel/ps6537/ps6586/ps6660/ps6811/prod_white_paper0900aecd804c363f.html

  I hope this clarifies your questions.

  Raga

• Why voice over 5s not like 6s on headphones on 6s is very low voice?

  I have problem with my iphone 6s headphone voice is very low when I listen to music or something, but the voice on my 5s is very high

  Hi Abdan,

  Welcome to Apple Support communities.

  From what I understand, the sound on your iPhone 6s is low or muffled compared to your iPhone 5 s. try to take a look at the article below the link which describes a similar problem and provides many excellent troubleshooting advice.

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone - Apple Support

  See you soon.