VOLUME UP TO MAX RANDOMLY?

Similar Questions

• Bluetooth volume goes down at random

  At some point in the past, the volume of bluetooth to deliver to some nominal level after every reboot. I would then have to increase the volume, acknowledge receipt of the warning that high volume may damage my hearing and end up turning up the volume. It's a pain, but hardly, I restarted the phone so it wasn't too big of a deal.

  In recent months, however, the behavior has changed. Now it will reset the volume to a nominal level at random, often while I'm driving and music streaming via bluetooth. In order to turn up, I have to break the law and interact with my phone while driving. At least I have to increase the volume and acknowledge this warning stupid on volume levels, even if the volume control is done through my truck. If I use navigation voice guidance is often too low to hear the low volume, which causes problems if I am in an unfamiliar place and now have to wrestle with the volume control while driving.

  Has anyone found what triggers the volume to be reset? Or how to avoid it? Or how to do to remove this warning that forces interaction screen with my phone just to increase the volume? It happens every week 1-2, and almost always when I'm actively driving. I thought I bought a phone, not a nanny volume level.

  https://play.Google.com/store/apps/details?ID=com.nightshadelabs.bluetoothvolume&hl=en

• Volume icon appears at random then spend or receive the phone call

  Hello

  Without doubt, I went through all the threads it are on the theme of the volume icon, but have not found anything that fits my 'problem '. I have an iPhone SE and sometimes when I make or receive a phone call the grey volume icon appears on the screen. I attributed it to the apps from third-party such as IMDB or Facebook but tried various scenarios and honestly can't pin it down to a specific. Someone at - it a similar problem? To be honest, it's quite annoying to see the gray icon volume pop up like this out of nowhere. I should add that all is well in terms of volume and the volume keys. No clue as to what causes this problem?

  Peace,

  Wojtek

  How do you know that all is well with the volume keys? They can work properly (increase or decrease in volume when you press on), but there might be a problem with the hardware with them or the mute button.

  Make an appointment on the Apple store and bring the phone to be checked.

  ~ Lyssa

• Low Volume

  Recently bought a 3rd gen Apple TV which is connected the HDMI3 on my Samsung TV.  When I watch anything through Apple TV, Netflix etc, I need to increase the TV volume up to MAX to hear anything.  How can I fix?

  Try the tips in this article > get help with audio, video or power on Apple TV - Apple Support

• Tecra M11 - very low audio volume

  I have a Tecra M11 for a few months and I am overall very happy with my new laptop.

  A question I have is the speaker volume level. When I play the video or the sound of music is about audible, even with the speakers lining and the relevant channels appeared in the volume mixer in Windows 7.

  When I open volume mixer I see that the speaker volume is at max, where is the application that plays music. I can't bar which moves vertically to show the level of the sound playback, a green one, and it does not go beyond 25% of the full bar.

  Everyone experienced, or got any advice on how I can get my speakers a little harder?

  Al

  Have you tried reinstalling the Audio driver?

  External speakers work ok?

  Have you installed the latest version of the BIOS?

  If you play a Midi file, is also very sweet?

• Volume on HP Pavilion G series computer laptop keys

  How to disable the volume (f8, f9 and f10) keys? Our son starts to turn the volume up to max! I guess if we disable the keys, we can adjust the volume via the control panel.

  Hello

  The function of these keys is installed by the Audio driver, so there is no real way to turn them off, but you can change a setting in the bios, called "Action keys Mode".  If you set this to off, you must then use the fn in combination with the key f key to assign the volume etc..

  To make this change, stop the laptop.  Tap away at f10 that you start the laptop to enter the bios menu and then make the change appears in the document at the link below.

  http://support.HP.com/us-en/document/c02035108

  Kind regards

  DP - K

• Satellite A200 does not correctly reduce or increase the volume

  Hello

  Our Satellite A200 is having problems with its Volume control wheel.
  If I turn the wheel (on the left or in the past), it does not correctly to reduce or increase the volume level.
  He jumps rather the volume level in seemingly random directions (with a preference for the volume).
  Turn the wheel slowly improves responsiveness a little, but it remains quite impossible to increase or decrease the volume control that to be.

  BTW, I am well aware that the volume control wheel is a wheel of puls-encoder rather than ye olde potentiometer.

  -Can anyone you tell me where I can find the configuration that is responsible for this Volume control wheel?
  -Which driver/firmware is attached to the order of the volume control?
  -How can I determine if this is a hardware or software problem?

  Advice would be welcome.

  Stephan

  Hello

  There is no software or hardware problem.
  It is a new generation of volume control.

  First of all there is no mechanical limit turning right or left.
  In addition, this volume controller works a little different than the old volume controllers. The volume can be increased and decreased using the fixed rate

  By the way;
  > Can someone tell me where I can find the configuration that is responsible for this Volume control wheel?
  You can change the volume as in the sound settings that could be found in the control panel.
  > Which driver/firmware is attached to the order of the volume control?
  Audio driver controls the volume controller.
  > How can I determine if this is a hardware or software problem?
  There is no problem

• How can I set the default volume for the sound level of the wave in Windows XP

  When I start or restart my computer running Windows XP Professional, the wave volume goes up to the max level.  This happens even if I set the volume to a level very low.  The volume control shows 'SoundMAX Digital Audio' at the bottom.

  I guess I could figure out how to do; However, it seems that it would be disabling applications and not answering is not to reason the volume resets to max level on boot-up the top.

• Sansa m250 - volume number change

  Hello!

  I have a m250 for a few years and I am very happy. About half a year I noticed something strange - sometimes when I pressed play/pause the player behavior was as if I pressed the volume button +. Maybe happened once in five times I pressed the play/pause. Strange thing, but I could live with that. Yesterday the volume went completely crazy and now most of the time the player behaves like one of the volume buttons (+ or-, at random) has been activated permanently. I know that m250 is an old friend, but I like it so I want to do something about this problem. The one I have is a European version (no FM radio), based on their processor Telechips, my f/w is 2.2.5e.

  In addition to this problem there are also some bad sectors or smth in the memory-an MP3 always causes the player to freeze when trying to play, but it is not related to any specific folder - in fact, whenever the library is rebuilt after disconnecting the drive from the computer a different song is "damaged" and who has been altered before works fine (another strange thing...).

  This problem of memory doesn't bother me that much, but I brought here anyway because maybe it is somehow related to the issue of volume buttons which essentially makes the player useless I tried to update the firmware, but it looks like there is more support for this former player and even if it has been updated of the firmware for m250 available Since the firmware I have is the most recent, if I tried to download it again I would probably get a message "your firmware is up-to-date, go f..." Yourself '... I hate it when things like that try to be smarter than me :/

  All tips, in addition to "throw out and go buy something of XXI century"? I already tried formatting, it did not help.

  Problem solved

  After about an hour of searching the Internet, I managed to 'upgrade' my firmware from 2.2.5e to 2.1.0a, thus allowing the FM radio firmware update went well, but did not help with the volume problem. Furthermore, another problem appeared - titles of tracks and playlists are displayed with spaces after each letter... But I don't like

  I solved the problem of volume by adding resistors for pullup for the volume buttons. Dirt that has penetrated over the years is probably too conductive and original pulls (if any) are very high strength in order to save the battery. I added button two resistance 100 k shooting each in the 3 pin chip TLV320AIC23B (VDD analog, which is 3, 3V). There is plenty of space in the case of the player to hide the resistance and now it works fine, and I have radio

  

• Volume of the voice channel Windows 7 very low, all levels of thin volume.

  Hello

  I have problems with a recent installation of Windows 7 Ultimate 32 bit.

  Problem:
  All the sounds of voice work, but they have a very low volume. I tend to have to reduce all the other audio almost minimum, then come out the volume of the voice, the speaker volume and mixer Volume volume even hear max.

  This is true in games, both running in and out of the compatibility mode. This also applies to Windows Media Player videos and games in the browser and video in Firefox. It's even true in the unit.

  Tried solutions:
  On other forums, similar problems of some other people:
  -a suggested that I have turn off the cancellation of the vote under Kaeroke in sound effect Manager, it is already disabled.
  -a suggested that I put CP > Sound > Communications tab > in the 'status quo', no effect.
  -tried reinstalling the drivers, once again, no effect.
  -A forum suggested to another with the same question that he installed 64-bit windows 7, is not viable as 64-bit installs (despite the fact that I'm on Ubuntu 64-bit.)

  History:
  Previously, in windows XP SP3 it worked well, as it does now on Ubuntu 9.04 (Dual Boot)
  The change seems to have occurred at the same time that the installation of Windows 7.

  System:
  OS: Windows 7 build 7800 Ultimate.
  DirectX: 9.0
  Audio driver: Realtek AC 97 Audio (R) to Audio VIA controller. Version 6.0.1.6305 (current version)

  Please let me know if you need additional information or have any suggestions on how to solve this problem, it is quite frustrating.

  Thank you for your time.

  There has been no updated drivers since, however... I don't know how it works, but somehow update on the side of my computer of 9.04 ubuntu 9.10 seems to have fixed...

  No idea how it worked, I have made no other changes to system register windows virus definition facilities.

  Weird.

  Anyway,.
  Thank you for your time.

• Sound went along with internal speakers?

  Hello, I use a MacBook Air laptop and my sound no longer works. When I go and check the internal speakers of available devices is not available sound remotely right LogMeIn, which I have no idea what it is, and the type is peripheral network. The output volume is at max as the input volume with headphones in or on the entry level not up or down in function speaks to me just randomly. Any response would be greatly appreciated, thank you.

  Just take your mac to any apple store, you need to change your speakers or try reinstalling your operating system in some cases that it may work

• Its appeal is too strong and not adjustable

  So I have a problem lately during the call to friends directly from Skype to Skype (no group call). The problem is that if you have not already guessed that the sound I get from my friend is much too strong as if Skype automatically on the volume up to max. However, it would not be a problem if I could adjust the volume in the speaker settings. I freely use the cursor in the different options, but the volume does not change. This problem happens only in "private" calls, so the problem is not present in the Group calls. I've attached a screenshot of my settings of the speakers during the call (my friend spoke to the moment I took the screenshot) and as you can see there is no green bar that indicates that he speaks. This problem sometimes used to disappear, if I stopped the call and started it again, but unfortunately is no longer the case. Thanks in advance for any help.

  I use the latest version of Skype (7.18.0.109 for the moment)

  My helmet is the Sennheiser PC 323D G4ME (the problem is also present on other helmets so it's probably not my problem)

  

  May be the same as in this case.

  http://community.Skype.com/T5/Windows-desktop-client/Windows-10-audio-settings-speaker-volume-slider...

• Satellite A215-S4747 (internal and external) microphone does not work

  Hello

  I write about my wife by Satellite A215-S4747 running Windows XP.
  A few months ago as the built-in microphone and external microphone has stopped working.

  This made me think it was a driver problem, although no issue in
  Control Panel > sounds and Audio devices > equipment for all drivers.

  I went through the Troubleshooting Wizard, but that did not help.
  I went and downloaded drivers RealTek HD Audio (R2.67), but that didn't fix it.

  Any help is very appreciated.

  Thank you

  Peter

  I want to emphasize that this machine is about 6 years old, making the possibility of some parts break most likely...

  Hello

  Sound works. Right? Well well, in that case I n t think that it is an audio driver problem.

  First of all, I think you should check some basic settings.
  (1) mic device.
  Go to the control panel-> sounds and Audio-> Audio-> sound recording devices
  Here you check if device right microphone has been selected

  (2) mic volume
  Go to the control panel-> sounds and Audio devices-> Audio-> audio-> Volume
  Here you check if the volume is at max level
  Additional button Advanced should be available at the bottom of the mic volume control click that it and check if the mic push in checked.

  Have you installed some tools or software which may affect (disabled) the microphone?

• Satellite U400 - internal microphone is too quiet

  I'm running on Windows 7 x 64. I downloaded the latest audio drivers (4.98.6.61) and is now the internal mic very quiet even if its volume is on max.

  I had Vista x 64 before and everything was ok. I tried the drivers for Vista on Windows 7, but nothing has changed - still quiet mic.

  Thank you for advice.

  Hello

  I had the same problem with my Satellite U400, but on Vista. After updating the audio driver and the BIOS, the problem still existed.
  After searching a bit here in the forum, I have activated the microphone amp and this was the solution! :)

  1. open the 'control panel' (Standard view)
  2. click on 'hardware and sound '.
  3. click on "sound."
  4. click on the "Recording" tab
  5. mark the Microphone and press the button "Properties".
  6. click on the tab customize and set the Microphone Boost control

  Check it!

• Pavilion 17: sound intensity

  is i, m hard of hearing, possible to increase the valume once you have 100%

  @rinozzz,

  Hello and thanks for the display on the HP support forums.  The only way to increase the volume in some cases, use a software called VLC media player.  The volume of the max system will require 100 to 200 percent.

  This will work only for the video that you play as movies dvd or video format saved on your computer.  It will allow you to play music files as well.

  The best way to go is to use an external speaker system.  They are on the market today which are quite small and produce a great sound at high volume.

  Here is a link that will show you the VLC media player and I'll give you a link to possible external speaker options.

  VLC Media Player.

  Best portable speakers: five to buy

  Now, the speakers presented on this site are just examples.  There are a lot of options out there, but this gives an idea of the size and shape, you can find.  The one I have at home looks like a small box of baking soda.  It is 2.5 inches across and 3 inches high and I can barely hear my cell phone on all volume until I plug this little guy and I can hear it all over the House.  It only cost me about $ 25.

  I hope this helps.

  Thanks again for posting and have a great day.