Volume buttons

As of today, my F6, F7 and F8 volume buttons stopped to change the volume, how can it be fixed?

Hello

Try the following.

Download the Realtek Audio Installer on the link below and save it in your downloads folder.

http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72094.exe

When finished, press and hold the Windows key and press R.

In the run window, type devmgmt.msc and press ENTER.

In the Device Manager window, expand sound, video and game controllers, right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

When finished, stop the laptop.

Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

When Windows has reloaded, open your download folder, right-click on the setup of Realtek Audio and select "Run as Administrator" to launch the installation.  When this has completed, restart the laptop.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Is it normal that the screen SE iPhone packed between the button of the vibration and the positive volume button?

    Is it normal that the screen SE iPhone packed between the vibration switch and the positive volume button?

    If it was the impact, where the screen would break. It is normal for a screen to break at the point of impact.

  • Volume button fell playing Wonderboy III

    Hi all

    While playing wonderboy III (am), my laptop fell and the volume button fell: (.) My volume before falling to 0, the button will not connect and my sound is now stuck at 0. Someone has any idea how to solve this problem?

    Thank you

    Is what model laptop?

    Most laptops have the volume dial a number on the motherboard, so the motherboard may be replaced.

    I doubt that you can simply re - attach if its broken.

  • Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and lock

    Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and the lock. I rebooted my phone like 10 times and it does not work, I need help,

    Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

    If this does not help, I would like to try a restore:

    https://support.Apple.com/en-us/HT201252

  • My low volume button is stiff.

    Hi all, my volume button on my iPhone 6 has sung a little, when pressing on it goes further into the phone that the maximum volume, he lost somehow his strengthens. It is more difficult to press on and it is just annoyin. Please can anyone suggest what I need to do. I have repairs and service coverage. I'm on the latest iOS.

    Hey, it would be BETTER to find an iFix store in your location, do not take it to third party companies or otherwise you will lose your service coverage

  • Volume buttons not working not properly

    The volume buttons on my keyboard do not seem to work right. When I adjust the volume, it is assumed to be a blue bar on the bottom screen to show how much the volume increased/decreased. For some reason, it does not show. That's all just annoying because I don't know how strong my volume is without clicking on the "speaker" icon.

    The volume buttons still work. He can always put on mute, raise or lower the volume. It just does not display it on the screen when I press the buttons.

    Try these 2 links and install, then reboot the pc.

    1) ftp://ftp.hp.com/pub/softlib/software7/COL19596/pv-51762-1/sp35034.exe

    2) ftp://ftp.hp.com/pub/softlib/software9/COL21985/pv-57800-1/sp37318.exe

    Also, note

    The Volume OSD is a HP MediaSmart Menu function. He has to load at startup. To do this, start, in the box type msconfig, press ENTER, go to the Startup tab, then browse the list of startup items and make sure it is enabled under the Startup tab...

    If she is not there, you can download it here... ftp://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48552.exe

  • Satellite U500: Volume + button glue IT when it is connected to the power adapter

    I have a problem with the touch buttons on my U500. I have already returned the first laptop that I bought for the Exchange.

    The question is this:
    When the power cord is connected (without worrying if connected to the wall) the "Volume +" button will stick THERE.
    The volume will continue to rise, it cannot be muted or turned down as the + keeps repeating.
    Without the power cable inserted the works of buttons as expected (normally).

    I made the new installation of recovery discs - do not set (under Vista)
    Then another new installation Win7 upgrade and this new PC is having the same problem.
    At first, I thought a hardware fault (the new PC worked fine for awhile).
    But now the second PC has the same symptoms I suspect a software/driver problem.

    I've seen suggestions for similar questions to:
    Re-install "Toshiba common Modules" but I can't find it on the support site for U500 in Australia.

    Any help would be greatly appreciated. Thanks to you all.

    What version of BIOS is installed?

    Try to update the BIOS.

  • Satellite U500 - the volume buttons do not work

    Hello

    I just bought a Toshiba Satellite U500 two days ago and already problems :(

    It has a control buttons sensitive contact, which includes the eco, the media buttons and the volume control utility (+ and -)
    The volume buttons do not work, and sometimes the computer crashes to their contact. Once I touch the-, he begins to turn volume down until it reaches zero, and even if I turn it up using windows, back to zero (as if the button is still depressed). The + does not work.

    Help, please. Is it possible to re-install the drivers?
    The only solution I found is to disable them using HWSetup...

    Great news. Thanks for the comments!

  • volume buttons not working do not, not hardware related

    I have a weird problem with volume controls on my iPad 3, iOS 9.2.1 - they do not work, but this isn't a hardware problem.

    When on the main screen or in all applications, the volume buttons do nothing. In addition, no noise (and I don't have a silent ringtone value).  If I drag it to get to the Control Panel, the volume slider is simply not there.

    However, the second that I plug in headphones, everything started working as it should, the volume slider reappears in the control panel and all is peachy. What works too, even without the headphones, is if I go into settings/sounds - volume buttons work and the sound is on.

    Thanks for any advice.

    Looks like it's stuck in headset mode which is a hardware related issue you can read more here

    iPhone stuck in mode "headphones listening".

  • Button / stop and the down volume button does not

    Hello, I got a G4 bike for less than a month and the power on button and the low volume button are a reagent.

    Hello

    I have the same problem. It certainly isn't a hardware problem, because after holding the power button for about 30 seconds, I was able to reset my phone.
    It works well after the restart.

    Best regards
    Diana

  • Satellite A350 - Volume button does not

    About 2 months ago, my laptop has been wet, was accidentally put in a puddle of water.

    The keyboard would not work for a day, so I wrapped in a towel and the next day everything returned to work normally, except the volume button. I can only change the volume on the screen.

    Y at - it an option to disable the button that can be toggled?

    I don't want to send repairs when the only bad thing is the volume button?

    Any ideas on a fix?

    Hello

    There's no option that would disable the physical volume control.
    I guess the water spilled on the keyboard caused the malfunction of equipment.

    As far as I know the volume control is a part of the motherboard and it fixed s
    I'm not quite sure if it is possible to replace only the s sensor
    So in the worst case the Exchange mobo :(

    PS; my volume control did not work properly. The volume indicator jumped on the screen and it was not possible to control the volume.
    I found the solution. It was a dirt and dust inside the probe volume. I cleaned with a jet of compressed air without disassembling the laptop. It worked!

  • Beats Audio volume buttons not working not

    The volume buttons (F9, F10 and F11) on my HP Pavilion dv7-6c95dx suddenly stopped working. When I press the buttons that the OSD Audio Beats rises and display current settings, but the volume does not change or cut. All other buttons (WiFi, display settings, help, multimedia controls) work very well. It is only the volume controls that are the cause.

    The Beats Audio appears in the plateau area and its utility is working to change the volume. The same with the standard Windows Control Panel. If I cut the audio in the red button the button mute comes on.

    I have searched the forums and based on different missions for similar problems I've updated the BIOS, audio driver, the software of the Quick Launch bar and Viewer on the screen with no result. I don't know if its possible to uninstall and reinstall the CP Audo beats or if it is part of one of the other driver packages.

    My OS Windows 7 64 bit if.

    Anyone have any ideas?

    Thank you.

    Had considered using the Windows system restore?

    Choose a restore point prior to the beginning of the question.

    Post your results here in your thread.

    Best regards

    ERICO

  • Volume button doesn't work is not with Vista Business

    Everyone knows what software Toshiba should I install in order to use the volume button in Vista Business? I have a Qosmio G20-102. Thank you.

    Hello

    Are you could not change the level of sound volume under Vista?

    The problem is that only some unique Vista drivers have been released for Qosmio G20 and not all functions can be used.
    But don t give up Andrej! There is a hope! Thanks to all the forum users who post proposed solutions!

    I found this very long, but interesting and useful article about the installation of Vista on Qosmio G20.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20494

    The user FranciscoJr is a guru of the G20 Vista + Qosnio ;)

    A hint; some of the objects of Toshiba value added package for the G30 can be installed on the G20.
    Install only the selected items. Otherwise, you will have conflicts with the windows Mobility Center.

    Good luck

  • Volume buttons control only the ringer volume

    It seems that the volume buttons on the side of the phone just control the ringer volume. On other Android phones, ringtone and Notification volumes have been linked together for ease of use.

    On the Droid Ultra/Maxx, there are four different volumes: media, ringtones, Notifications, and alarms. And none of them are interconnected. It is extremely annoying for many reasons, the main reason being there is no easy way to lower or increase the volume of ringtone and Notifications at the same time by using the volume buttons.

    The ring volume is adjustable to the max, but the text message sound will be very quiet. Or the ring volume can be set down, but text message noise will be very strong.

    Is it possible to fix this?


  • T60 thinkvantage key works but the volume buttons don't work do not

    Hello, I have just reinstalled my Lenovo T60 8741-HAM with Windows Vista business and the volume buttons do not work. I installed the latest drivers, hotkey, but who got the thinkvantage and Fn key combos work well, the volume buttons still nothing doing.

    Can anyone help?

    It worked! I need to install the lenovo system interface driver

    I also found this very useful page of the most common T60 drivers. Here I found only a few days when I started to reinstall my machine.

Maybe you are looking for

  • beginning AppleScript question

    I'm a programmer, so I would have no difficulty in understanding AppleScript, but I must be missing something fundamental. I wanted to write a script that types the text in a window of LibreOffice and many examples, I found on the web, I should write

  • Satellite L30: XP Clean install - used to work, now it doesn't

    Hello First of all, thank you for taking the time to read this and thanks to all those who want to contribute their thoughts. Now, the problem more in detail... * Summary *.Laptop comes with Vista. New installation of XP & drivers - all is well for m

  • Step by step single run through a sequence TestStand using the API

    Anyone know if it is possible to break a sequence of execution and then simple step during various stages of a sequence using the API TestStand? Pause and resume running no problem, but step by step once execution is broken turns out to be illusory.

  • Laptop HP Pavilion 14 n201-tx: RAM upgrade for laptop HP Pavilion 14 n201-tx

    I have a laptop HP Pavilion 14 n201-TX with 4 GB 1Rx8 RAM of PC3L - 12800S. The other location is empty. I want to upgrade the RAM to 8 GB or more.  I have 2 questions: Can I buy a 8 GB of RAM and pair it with the existing 4 GB RAM? 2 should. what RA

  • Conta locked - desespero

    EU criei este novo email, porque a minha conta faith locked. As long as I am mine, porque preciso back too e documents information that EU had na antiga minha conta.  JA I tried todos os procedimentos indicados pelo hotmail, nada mas deu certo. Gosta