SX 60 HS there is a flashing red camera icon

Similar Questions

• HP Deskjet 6988 does not print; shows printer offline and there is a flashing red light. When I right click on the printer, there is no option to put it on the line. How can I fix it?

  I replaced the color ink cartridge before receiving these problems.  I have checked to make sure all was well, but don't know what else to try.

  Hello Roman_99,

  My opinion on this issue would be to contact HP, because there seems to be something physically wrong with the printer.

  Let us know.

  Best regards

  Matthew_Ha

• Apple icon flashes red once when starting the

  Suddenly, new iMac (drive merger) began to display a flashing icon of Red Apple at the start, but it does not start successfully, a bit slower than normal. A glaring red box box icon flashes red once during start up. Installed Sierra 10.12 on September 21, but this cannot be connected. With the help of an Apple technician, I put the machine through the

  • Disc utilities check App and through the restore process

  Reset SMC •

  • Safe mode starts

  • Memory NVRAM reset (three times)

  • Restored to point a few days before the problem occurred?

  Perplexing phone technician, and the master builder that he consulted had no answer. I am at a loss. Is there a problem, and if so, what should I do next.

  Thank you

  Pat (October 4)

  I have the same problem since I installed Sierra (2 days ago)

• At startup, the Apple iMac logo flashes red after update to Mac OS Sierra

  After upgrading to Mac OS Sierra, my 2015 iMac 21.5 retina has a flashing red Apple logo, then a brief splash screen flickering when starting. Once started, the computer seems fine, with no obvious debris. I don't know why the logo flashes red and then the screen flickers - bad drivers; a problem of software in the start-up phase; a problem with the drive of the merger; or maybe some other gremlin? A quick search on the internet reveals that at least a few others have the same problem with this version of the OS, and it seems to have occurred in the years spent with any other version of Mac OS upgrades. But there is no good answers on how to fix this. I rebooted several times hoping it would clear itself, but no luck.

  Safe Mode boot removes the system caches that can help after an update or upgrade.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

• 32D1334B LCD TV - not light power light flashes red & Green

  I have a Toshiba 32D1334B LCD TV, it used to work perfectly well and then all of a sudden, it will not activate.
  When I plug in the TV, the power automatically light flashes red and green permanently. There is no way to turn on the TV; the screen remains black.

  I had to take off the back, watched and deleted all the parts, but can not see the obvious problems. I also a multimeter and power to the various sections of the TV is, but that's as far as my electrical knowledge goes!

  I don't really know what else to try, but I am very reluctant to throw away the TV that I know it's probably a unique piece that needs to be replaced to fix it. I searched online and others have reported the same problem exactly, but it had not resolved there always. Unfortunately, TV is more under warranty... If anyone has any suggestions or can provide any help, then it would be greatly appreciated!

  Thanks in advance.

  If you find out how to fix it please let me know because my tv is the same.chris

• Now 23-d044 - installed MXM video card - HP Envy screen flashes red green blue black

  Hello

  I'm a 23-d044 I wanted to do the update/install video card instead of using the integrated graphics card.  I tried two different cards, a nVidia GeForce GT 540 m 2 GB and a part of HP AMD card #707804-002.  In each case the applied heat sink was part HP #694456-001. In each case, whenever I go back to the PC and it works, the screen flashes red, green, blue, black, white to infinity. I have read these and other forums indicating that this is a fault with the GPU, but I find that is unlikely given that I tried two different cards. I thought that maybe the MXM connection on the motherboard, but on the original motherboard power connector was defective, I have since replaced the motherboard (about 2 weeks ago) with the same part number. I downloaded both the AMD and nVidia drivers the most recent for each card (while running the integrated graphics card), but not joy.  Anyone have any ideas?  Thanks in advance for the help!

  Sean

  Sean, I had the same problem too.  I finally thought to it.  Just above where the grafics card go is two connectors and one of them has a plug in there.  above the connectors, said uma_lvds, the other says MXM_LVDS.  Swap the power cord of the uma_lvds to the mxm_lvds.  This will fix the problem and you will be running.

• Whyis the flashing red battery status?

  Why the State of the battery flashes red?

  Which means generally that he is in power, running low powered or not connected properly.  Check the battery charge (in the notification area).  The power adapter is plugged in and the battery is being charged?  When did start to happening?  What is the manufacturer, the brand and model of your laptop?  Try disconnecting the battery and re - reconnect in case there is a problem with the contacts.

  I hope this helps.  Please answer my questions in your answer.

  Thnaks and good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Slow flashing red in 3500 Series Microsoft wireless mouse

  Original title: my mouse is weird

  I have a small (3500 version) Microsoft wireless mouse and I just put a new battery in there and all I get is a red light flashing slow... the battery is good... I tested it... any help would be greatly appreciated.  It's probably something really stupid that I'm missing, but I hate that touchpad and I take courses online and rely heavily on the mouse to avoid mistakes... Help!

  Hi Jane,

  There are many reasons why we have a flashing red light on a Microsoft wireless mouse. The mouse software may need an update, you're battery may need to be replaced or recharged, you're wireless device can be connected to a port is non-functional, something can interfere with the wireless mouse.

  Here are some tips you can follow and see if that helps.

  1. download and install the latest drivers for mouse depending on the type of computer http://www.microsoft.com/hardware/en-us/p/wireless-mobile-mouse-3500#support system

  2 a wireless device may interfere with each other. Look at the bottom of your mouse to see if it has a button to synchronize with the receiver. If Yes, press this button. In so doing resync the mouse using a different channel. Turn the receiver upside down or on its side to see if you are able to get a better connection. Remove the other wireless devices, such as a wireless or a cell phone and make sure that the mouse is located at a distance of at least eight inches of a wireless keyboard. Make sure that the mouse is not on a very close to metal objects or metal surface.

  3 try using a mouse instead of using it on a glassy or metallic surface.

  4. ensure that the batteries are inserted correctly. Open battery compartment. Check and remove anything that might obstruct the battery connection. Search corrosion as well and remove, if possible.

  I hope this helps.

• Boot of of Smartphone blackBerry, watch only flashing red LED...

  I am led into the wall here right now everyone, sorry to make my first post as a report disaster but here goes nothin' ':

  I bought a "BOLD" on ebay a few weeks ago and everything was fine except for the fact that 2 days after getting it the keyboard stopped working. There is no solution possible workaround, the man that I bought on eBay sent me another (very nice of him) I received today. I go to AT & T to set up and it went very well, I come home with the new phone and connect it to synchronize my data. He said all of a sudden (update failed), which confused me because I'm trying to update whatever it is and now it won't start or work or anything. It goes to show a flashing red LED. I can't appear in the Desktop Manager, I can get it to reinstall with the application loader. I just went back to AT & T and as usual that they told me they couldn't help me.

  I'm really really REALLY aggravated at this time, and I could desperately use someone's help. How can I reinstall the operating system if I can't answer?

  The software seems to be corrupted.

  Make sure you have the latest version of the software for your device and your carrier installed on the computer.

  YOU get this on the carrier's website according to your phone, the ID of the SELLER. MAKE SURE YOU DO A VENDOR ID CHECK to see which provider the software must come.

  It's the device, software, not the Office Manager.

  Once done, go to drive C: Program Files: common files: Research in Motion: App Loader and double-click on loader.exe.

  Once the Welcome screen appears, plug in the appliance WITHOUT the battery and click Next. When you see the PIN number appear after maybe a few minutes press next.

  Once he arrives at the device application part, put the battery in.

  On the last page before you click on finish, you see an option "EITHER", click here and make sure that both check boxes are fixed.

  This will fix the problem.

• BlackBerry Smartphones phone lights, flashing red every 3 seconds. (Blackberry 9900)

  Hello everyone.
  I baught my blackberry Bold 9900 this year (March 2012) ive been use since then, but recently it has begun to develop problems such as freezing and everything. Last night, the battery was 30% (enough for the last two hours) the phone just frozen and won't turn on. It continues to flash red 3 times every 3 seconds. Help? 

  Mr_othman wrote:

  Hello everyone.
  I baught my blackberry Bold 9900 this year (March 2012) ive been use since then, but recently it has begun to develop problems such as freezing and everything. Last night, the battery was 30% (enough for the last two hours) the phone just frozen and won't turn on. It continues to flash red 3 times every 3 seconds. Help? 

  Hello

  Before reloading your OS, please try this sequence... Note that during throughout the entire process 4h15m, your BB must stay connected to a good charger (not the USB PC):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charge battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem.

  Good luck and let us know!

• Powerbeats does not charge flashing red

  Powerbeats does not charge flashing red

  Hi gmalasy,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are having these problems with your Beats headphones. If you have problems to load your Powerbeats, you can find information and the link in the following article useful:

  Charge your headphones wireless Powerbeats2 - Apple Support

  Concerning

• Stor.E USB HDD PX1399E - 2 20 - light continues to flash red / blue

  Stor E usb hdd, no access that passes light continues to flash red/blue, which means?
  (constant alternating red/blue 2 x / sec., and not not not flashing as read/write)

  * RESOLVED: * already tried several cables, also with dual usb (Y-cable).
  the solution was a cable with an interferencefilter close to the HARD drive.

  Post edited by: borel

  > RESOLVED: already tried several cables, also with dual usb (Y-cable).
  > solution was a cable with an interferencefilter close to the HARD drive.

  Thanks for your comments!

• In the latest version of MF, there is a missing button, who was in the previous version: between backward/forward buttons and the bar hits there was little flash, who showed a few recent pages I just went through. How can I restore it?

  In the latest version of MF, there is a missing button, who was in the previous version: between backward/forward buttons and the bar hits there was little flash, who showed a few recent pages I just went through. How can I restore it?

  If you mean the drop marker so you can always get history buttons front and rear, if necessary by left clicking and for a second, or by right-clicking on them.

  If you want to continue the brand drop there too there is that Extension to https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/

  Also the abbreviation for Firefox is Fx

• Outline of the block diagram flashing red

  Hello. I don't have access to the Vi in question at the moment so I'll make it as General as possible. My Vi worked properly for a week or two, but today it started to flash red around the edge of the block diagram. Once the Vi makes the block diagram whole black for a while, followed by the red square around him. What is this red box? They are still able to run the Vi, it's why I can't stop their however, it is not a display of alarm or anything like that. I tried to watch as they run, but am getting no where fast. I just want to know what means the flashing red box does not pinpoint the problem. Thank you

  This means that your chart has been set to a big "breakpoint." Go to View > breakpoint Manager and delete the offending breakpoint.

  If you hold down the CTRL key while running a VI, LabVIEW adds a breakpoint at what you click on, so just be careful with that. I accidentally added breakpoints to my code more than once.

• Device flashing red lights r200 printer does not

  flashing red lights the printer does not

  The flashing lights are no doubt an error message from the printer for you.  See the manual supplied with the printer or the web site of the manufacturer of the printer - model support and the type of lights flashing almost certainly have a specific meaning which will clear once you know what it means.